--- zzzz-none-000/linux-5.4.213/Documentation/devicetree/bindings/hwmon/ina2xx.txt	2022-09-15 10:04:56.000000000 +0000
+++ miami-7690-761/linux-5.4.213/Documentation/devicetree/bindings/hwmon/ina2xx.txt	2024-05-29 11:19:50.000000000 +0000
@@ -8,17 +8,38 @@
 	- "ti,ina226" for ina226
 	- "ti,ina230" for ina230
 	- "ti,ina231" for ina231
+	- "ti,ina234" for ina234
+	- "ti,ina236" for ina236
 - reg: I2C address
 
+Alert types
+
+- shunt overvoltage  : 15
+- shunt undervoltage : 14
+- bus overvoltage    : 13
+- bus undervoltage   : 12
+- power overlimit    : 11
+
 Optional properties:
 
 - shunt-resistor
 	Shunt resistor value in micro-Ohm
+- alert
+	IRQ from ina2xx to indicate an alert
+- alert-type
+	configurable type of alert e.g. bus under voltage,
+	see above
+- alert-limit
+	configurable value at which an alert will trigger
 
 Example:
 
-ina220@44 {
-	compatible = "ti,ina220";
+ina236@44 {
+	compatible = "ti,ina236";
 	reg = <0x44>;
 	shunt-resistor = <1000>;
+	interrupts-extended = <&tlmm 32 IRQ_TYPE_EDGE_FALLING>;
+	interrupt-names = "alert";
+	alert-type = <12>; /* bus undervoltage */
+	alert-limit = <10800>; /* 10,8V */
 };