--- zzzz-none-000/linux-5.4.213/Documentation/hwmon/ina2xx.rst	2022-09-15 10:04:56.000000000 +0000
+++ miami-7690-761/linux-5.4.213/Documentation/hwmon/ina2xx.rst	2024-05-29 11:19:50.000000000 +0000
@@ -99,6 +99,25 @@
 ------------------------------------------------
 
 ======================= ====================================================
+in0_lcrit		Critical low shunt voltage
+in0_crit		Critical high shunt voltage
+in0_lcrit_alarm		Shunt voltage critical low alarm
+in0_crit_alarm		Shunt voltage critical high alarm
+in1_lcrit		Critical low bus voltage
+in1_crit		Critical high bus voltage
+in1_lcrit_alarm		Bus voltage critical low alarm
+in1_crit_alarm		Bus voltage critical high alarm
+power1_crit		Critical high power
+power1_crit_alarm	Power critical high alarm
 update_interval		data conversion time; affects number of samples used
 			to average results for shunt and bus voltages.
 ======================= ====================================================
+
+.. note::
+
+   - Configure `shunt_resistor` before configure `power1_crit`, because power
+     value is calculated based on `shunt_resistor` set.
+   - Because of the underlying register implementation, only one `*crit` setting
+     and its `alarm` can be active. Writing to one `*crit` setting clears other
+     `*crit` settings and alarms. Writing 0 to any `*crit` setting clears all
+     `*crit` settings and alarms.