/* * drivers/w1/masters/omap_hdq.c * * Copyright (C) 2007,2012 Texas Instruments, Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. * */ #include #include #include #include #include #include #include #include #include #include #include "../w1.h" #include "../w1_int.h" #define MOD_NAME "OMAP_HDQ:" #define OMAP_HDQ_REVISION 0x00 #define OMAP_HDQ_TX_DATA 0x04 #define OMAP_HDQ_RX_DATA 0x08 #define OMAP_HDQ_CTRL_STATUS 0x0c #define OMAP_HDQ_CTRL_STATUS_SINGLE BIT(7) #define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK BIT(6) #define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE BIT(5) #define OMAP_HDQ_CTRL_STATUS_GO BIT(4) #define OMAP_HDQ_CTRL_STATUS_PRESENCE BIT(3) #define OMAP_HDQ_CTRL_STATUS_INITIALIZATION BIT(2) #define OMAP_HDQ_CTRL_STATUS_DIR BIT(1) #define OMAP_HDQ_INT_STATUS 0x10 #define OMAP_HDQ_INT_STATUS_TXCOMPLETE BIT(2) #define OMAP_HDQ_INT_STATUS_RXCOMPLETE BIT(1) #define OMAP_HDQ_INT_STATUS_TIMEOUT BIT(0) #define OMAP_HDQ_SYSCONFIG 0x14 #define OMAP_HDQ_SYSCONFIG_SOFTRESET BIT(1) #define OMAP_HDQ_SYSCONFIG_AUTOIDLE BIT(0) #define OMAP_HDQ_SYSCONFIG_NOIDLE 0x0 #define OMAP_HDQ_SYSSTATUS 0x18 #define OMAP_HDQ_SYSSTATUS_RESETDONE BIT(0) #define OMAP_HDQ_FLAG_CLEAR 0 #define OMAP_HDQ_FLAG_SET 1 #define OMAP_HDQ_TIMEOUT (HZ/5) #define OMAP_HDQ_MAX_USER 4 static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue); static int w1_id; struct hdq_data { struct device *dev; void __iomem *hdq_base; /* lock status update */ struct mutex hdq_mutex; int hdq_usecount; u8 hdq_irqstatus; /* device lock */ spinlock_t hdq_spinlock; /* * Used to control the call to omap_hdq_get and omap_hdq_put. * HDQ Protocol: Write the CMD|REG_address first, followed by * the data wrire or read. */ int init_trans; int rrw; /* mode: 0-HDQ 1-W1 */ int mode; }; static int omap_hdq_probe(struct platform_device *pdev); static int omap_hdq_remove(struct platform_device *pdev); static const struct of_device_id omap_hdq_dt_ids[] = { { .compatible = "ti,omap3-1w" }, { .compatible = "ti,am4372-hdq" }, {} }; MODULE_DEVICE_TABLE(of, omap_hdq_dt_ids); static struct platform_driver omap_hdq_driver = { .probe = omap_hdq_probe, .remove = omap_hdq_remove, .driver = { .name = "omap_hdq", .of_match_table = omap_hdq_dt_ids, }, }; static u8 omap_w1_read_byte(void *_hdq); static void omap_w1_write_byte(void *_hdq, u8 byte); static u8 omap_w1_reset_bus(void *_hdq); static struct w1_bus_master omap_w1_master = { .read_byte = omap_w1_read_byte, .write_byte = omap_w1_write_byte, .reset_bus = omap_w1_reset_bus, }; /* HDQ register I/O routines */ static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset) { return __raw_readl(hdq_data->hdq_base + offset); } static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val) { __raw_writel(val, hdq_data->hdq_base + offset); } static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset, u8 val, u8 mask) { u8 new_val = (__raw_readl(hdq_data->hdq_base + offset) & ~mask) | (val & mask); __raw_writel(new_val, hdq_data->hdq_base + offset); return new_val; } static void hdq_disable_interrupt(struct hdq_data *hdq_data, u32 offset, u32 mask) { u32 ie; ie = readl(hdq_data->hdq_base + offset); writel(ie & mask, hdq_data->hdq_base + offset); } /* * Wait for one or more bits in flag change. * HDQ_FLAG_SET: wait until any bit in the flag is set. * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared. * return 0 on success and -ETIMEDOUT in the case of timeout. */ static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset, u8 flag, u8 flag_set, u8 *status) { int ret = 0; unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; if (flag_set == OMAP_HDQ_FLAG_CLEAR) { /* wait for the flag clear */ while (((*status = hdq_reg_in(hdq_data, offset)) & flag) && time_before(jiffies, timeout)) { schedule_timeout_uninterruptible(1); } if (*status & flag) ret = -ETIMEDOUT; } else if (flag_set == OMAP_HDQ_FLAG_SET) { /* wait for the flag set */ while (!((*status = hdq_reg_in(hdq_data, offset)) & flag) && time_before(jiffies, timeout)) { schedule_timeout_uninterruptible(1); } if (!(*status & flag)) ret = -ETIMEDOUT; } else return -EINVAL; return ret; } /* write out a byte and fill *status with HDQ_INT_STATUS */ static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status) { int ret; u8 tmp_status; unsigned long irqflags; *status = 0; spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); /* clear interrupt flags via a dummy read */ hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); /* ISR loads it with new INT_STATUS */ hdq_data->hdq_irqstatus = 0; spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val); /* set the GO bit */ hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); /* wait for the TXCOMPLETE bit */ ret = wait_event_timeout(hdq_wait_queue, hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); if (ret == 0) { dev_dbg(hdq_data->dev, "TX wait elapsed\n"); ret = -ETIMEDOUT; goto out; } *status = hdq_data->hdq_irqstatus; /* check irqstatus */ if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) { dev_dbg(hdq_data->dev, "timeout waiting for" " TXCOMPLETE/RXCOMPLETE, %x", *status); ret = -ETIMEDOUT; goto out; } /* wait for the GO bit return to zero */ ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR, &tmp_status); if (ret) { dev_dbg(hdq_data->dev, "timeout waiting GO bit" " return to zero, %x", tmp_status); } out: return ret; } /* HDQ Interrupt service routine */ static irqreturn_t hdq_isr(int irq, void *_hdq) { struct hdq_data *hdq_data = _hdq; unsigned long irqflags; spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus); if (hdq_data->hdq_irqstatus & (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE | OMAP_HDQ_INT_STATUS_TIMEOUT)) { /* wake up sleeping process */ wake_up(&hdq_wait_queue); } return IRQ_HANDLED; } /* W1 search callback function in HDQ mode */ static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev, u8 search_type, w1_slave_found_callback slave_found) { u64 module_id, rn_le, cs, id; if (w1_id) module_id = w1_id; else module_id = 0x1; rn_le = cpu_to_le64(module_id); /* * HDQ might not obey truly the 1-wire spec. * So calculate CRC based on module parameter. */ cs = w1_calc_crc8((u8 *)&rn_le, 7); id = (cs << 56) | module_id; slave_found(master_dev, id); } static int _omap_hdq_reset(struct hdq_data *hdq_data) { int ret; u8 tmp_status; hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET); /* * Select HDQ/1W mode & enable clocks. * It is observed that INT flags can't be cleared via a read and GO/INIT * won't return to zero if interrupt is disabled. So we always enable * interrupt. */ hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); /* wait for reset to complete */ ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS, OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status); if (ret) dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x", tmp_status); else { hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK | hdq_data->mode); hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_AUTOIDLE); } return ret; } /* Issue break pulse to the device */ static int omap_hdq_break(struct hdq_data *hdq_data) { int ret = 0; u8 tmp_status; unsigned long irqflags; ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); if (ret < 0) { dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); ret = -EINTR; goto rtn; } spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); /* clear interrupt flags via a dummy read */ hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); /* ISR loads it with new INT_STATUS */ hdq_data->hdq_irqstatus = 0; spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); /* set the INIT and GO bit */ hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO); /* wait for the TIMEOUT bit */ ret = wait_event_timeout(hdq_wait_queue, hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); if (ret == 0) { dev_dbg(hdq_data->dev, "break wait elapsed\n"); ret = -EINTR; goto out; } tmp_status = hdq_data->hdq_irqstatus; /* check irqstatus */ if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) { dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x", tmp_status); ret = -ETIMEDOUT; goto out; } /* * check for the presence detect bit to get * set to show that the slave is responding */ if (!(hdq_reg_in(hdq_data, OMAP_HDQ_CTRL_STATUS) & OMAP_HDQ_CTRL_STATUS_PRESENCE)) { dev_dbg(hdq_data->dev, "Presence bit not set\n"); ret = -ETIMEDOUT; goto out; } /* * wait for both INIT and GO bits rerurn to zero. * zero wait time expected for interrupt mode. */ ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR, &tmp_status); if (ret) dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits" " return to zero, %x", tmp_status); out: mutex_unlock(&hdq_data->hdq_mutex); rtn: return ret; } static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val) { int ret = 0; u8 status; ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); if (ret < 0) { ret = -EINTR; goto rtn; } if (!hdq_data->hdq_usecount) { ret = -EINVAL; goto out; } if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); /* * The RX comes immediately after TX. */ wait_event_timeout(hdq_wait_queue, (hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE), OMAP_HDQ_TIMEOUT); hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0, OMAP_HDQ_CTRL_STATUS_DIR); status = hdq_data->hdq_irqstatus; /* check irqstatus */ if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { dev_dbg(hdq_data->dev, "timeout waiting for" " RXCOMPLETE, %x", status); ret = -ETIMEDOUT; goto out; } } /* the data is ready. Read it in! */ *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA); out: mutex_unlock(&hdq_data->hdq_mutex); rtn: return ret; } /* Enable clocks and set the controller to HDQ/1W mode */ static int omap_hdq_get(struct hdq_data *hdq_data) { int ret = 0; ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); if (ret < 0) { ret = -EINTR; goto rtn; } if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) { dev_dbg(hdq_data->dev, "attempt to exceed the max use count"); ret = -EINVAL; goto out; } else { hdq_data->hdq_usecount++; try_module_get(THIS_MODULE); if (1 == hdq_data->hdq_usecount) { pm_runtime_get_sync(hdq_data->dev); /* make sure HDQ/1W is out of reset */ if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) & OMAP_HDQ_SYSSTATUS_RESETDONE)) { ret = _omap_hdq_reset(hdq_data); if (ret) /* back up the count */ hdq_data->hdq_usecount--; } else { /* select HDQ/1W mode & enable clocks */ hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK | hdq_data->mode); hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_NOIDLE); hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); } } } out: mutex_unlock(&hdq_data->hdq_mutex); rtn: return ret; } /* Disable clocks to the module */ static int omap_hdq_put(struct hdq_data *hdq_data) { int ret = 0; ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); if (ret < 0) return -EINTR; hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_AUTOIDLE); if (0 == hdq_data->hdq_usecount) { dev_dbg(hdq_data->dev, "attempt to decrement use count" " when it is zero"); ret = -EINVAL; } else { hdq_data->hdq_usecount--; module_put(THIS_MODULE); if (0 == hdq_data->hdq_usecount) pm_runtime_put_sync(hdq_data->dev); } mutex_unlock(&hdq_data->hdq_mutex); return ret; } /* * W1 triplet callback function - used for searching ROM addresses. * Registered only when controller is in 1-wire mode. */ static u8 omap_w1_triplet(void *_hdq, u8 bdir) { u8 id_bit, comp_bit; int err; u8 ret = 0x3; /* no slaves responded */ struct hdq_data *hdq_data = _hdq; u8 ctrl = OMAP_HDQ_CTRL_STATUS_SINGLE | OMAP_HDQ_CTRL_STATUS_GO | OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK; u8 mask = ctrl | OMAP_HDQ_CTRL_STATUS_DIR; omap_hdq_get(_hdq); err = mutex_lock_interruptible(&hdq_data->hdq_mutex); if (err < 0) { dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); goto rtn; } hdq_data->hdq_irqstatus = 0; /* read id_bit */ hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS, ctrl | OMAP_HDQ_CTRL_STATUS_DIR, mask); err = wait_event_timeout(hdq_wait_queue, (hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE), OMAP_HDQ_TIMEOUT); if (err == 0) { dev_dbg(hdq_data->dev, "RX wait elapsed\n"); goto out; } id_bit = (hdq_reg_in(_hdq, OMAP_HDQ_RX_DATA) & 0x01); hdq_data->hdq_irqstatus = 0; /* read comp_bit */ hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS, ctrl | OMAP_HDQ_CTRL_STATUS_DIR, mask); err = wait_event_timeout(hdq_wait_queue, (hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE), OMAP_HDQ_TIMEOUT); if (err == 0) { dev_dbg(hdq_data->dev, "RX wait elapsed\n"); goto out; } comp_bit = (hdq_reg_in(_hdq, OMAP_HDQ_RX_DATA) & 0x01); if (id_bit && comp_bit) { ret = 0x03; /* no slaves responded */ goto out; } if (!id_bit && !comp_bit) { /* Both bits are valid, take the direction given */ ret = bdir ? 0x04 : 0; } else { /* Only one bit is valid, take that direction */ bdir = id_bit; ret = id_bit ? 0x05 : 0x02; } /* write bdir bit */ hdq_reg_out(_hdq, OMAP_HDQ_TX_DATA, bdir); hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS, ctrl, mask); err = wait_event_timeout(hdq_wait_queue, (hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_TXCOMPLETE), OMAP_HDQ_TIMEOUT); if (err == 0) { dev_dbg(hdq_data->dev, "TX wait elapsed\n"); goto out; } hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS, 0, OMAP_HDQ_CTRL_STATUS_SINGLE); out: mutex_unlock(&hdq_data->hdq_mutex); rtn: omap_hdq_put(_hdq); return ret; } /* reset callback */ static u8 omap_w1_reset_bus(void *_hdq) { omap_hdq_get(_hdq); omap_hdq_break(_hdq); omap_hdq_put(_hdq); return 0; } /* Read a byte of data from the device */ static u8 omap_w1_read_byte(void *_hdq) { struct hdq_data *hdq_data = _hdq; u8 val = 0; int ret; /* First write to initialize the transfer */ if (hdq_data->init_trans == 0) omap_hdq_get(hdq_data); ret = hdq_read_byte(hdq_data, &val); if (ret) { ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); if (ret < 0) { dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); return -EINTR; } hdq_data->init_trans = 0; mutex_unlock(&hdq_data->hdq_mutex); omap_hdq_put(hdq_data); return -1; } hdq_disable_interrupt(hdq_data, OMAP_HDQ_CTRL_STATUS, ~OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); /* Write followed by a read, release the module */ if (hdq_data->init_trans) { ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); if (ret < 0) { dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); return -EINTR; } hdq_data->init_trans = 0; mutex_unlock(&hdq_data->hdq_mutex); omap_hdq_put(hdq_data); } return val; } /* Write a byte of data to the device */ static void omap_w1_write_byte(void *_hdq, u8 byte) { struct hdq_data *hdq_data = _hdq; int ret; u8 status; /* First write to initialize the transfer */ if (hdq_data->init_trans == 0) omap_hdq_get(hdq_data); /* * We need to reset the slave before * issuing the SKIP ROM command, else * the slave will not work. */ if (byte == W1_SKIP_ROM) omap_hdq_break(hdq_data); ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); if (ret < 0) { dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); return; } hdq_data->init_trans++; mutex_unlock(&hdq_data->hdq_mutex); ret = hdq_write_byte(hdq_data, byte, &status); if (ret < 0) { dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status); return; } /* Second write, data transferred. Release the module */ if (hdq_data->init_trans > 1) { omap_hdq_put(hdq_data); ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); if (ret < 0) { dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); return; } hdq_data->init_trans = 0; mutex_unlock(&hdq_data->hdq_mutex); } } static int omap_hdq_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct hdq_data *hdq_data; struct resource *res; int ret, irq; u8 rev; const char *mode; hdq_data = devm_kzalloc(dev, sizeof(*hdq_data), GFP_KERNEL); if (!hdq_data) { dev_dbg(&pdev->dev, "unable to allocate memory\n"); return -ENOMEM; } hdq_data->dev = dev; platform_set_drvdata(pdev, hdq_data); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hdq_data->hdq_base = devm_ioremap_resource(dev, res); if (IS_ERR(hdq_data->hdq_base)) return PTR_ERR(hdq_data->hdq_base); hdq_data->hdq_usecount = 0; hdq_data->rrw = 0; mutex_init(&hdq_data->hdq_mutex); pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) { dev_dbg(&pdev->dev, "pm_runtime_get_sync failed\n"); goto err_w1; } ret = _omap_hdq_reset(hdq_data); if (ret) { dev_dbg(&pdev->dev, "reset failed\n"); return -EINVAL; } rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION); dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n", (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt"); spin_lock_init(&hdq_data->hdq_spinlock); irq = platform_get_irq(pdev, 0); if (irq < 0) { ret = -ENXIO; goto err_irq; } ret = devm_request_irq(dev, irq, hdq_isr, 0, "omap_hdq", hdq_data); if (ret < 0) { dev_dbg(&pdev->dev, "could not request irq\n"); goto err_irq; } omap_hdq_break(hdq_data); pm_runtime_put_sync(&pdev->dev); ret = of_property_read_string(pdev->dev.of_node, "ti,mode", &mode); if (ret < 0 || !strcmp(mode, "hdq")) { hdq_data->mode = 0; omap_w1_master.search = omap_w1_search_bus; } else { hdq_data->mode = 1; omap_w1_master.triplet = omap_w1_triplet; } omap_w1_master.data = hdq_data; ret = w1_add_master_device(&omap_w1_master); if (ret) { dev_dbg(&pdev->dev, "Failure in registering w1 master\n"); goto err_w1; } return 0; err_irq: pm_runtime_put_sync(&pdev->dev); err_w1: pm_runtime_disable(&pdev->dev); return ret; } static int omap_hdq_remove(struct platform_device *pdev) { struct hdq_data *hdq_data = platform_get_drvdata(pdev); mutex_lock(&hdq_data->hdq_mutex); if (hdq_data->hdq_usecount) { dev_dbg(&pdev->dev, "removed when use count is not zero\n"); mutex_unlock(&hdq_data->hdq_mutex); return -EBUSY; } mutex_unlock(&hdq_data->hdq_mutex); /* remove module dependency */ pm_runtime_disable(&pdev->dev); w1_remove_master_device(&omap_w1_master); return 0; } module_platform_driver(omap_hdq_driver); module_param(w1_id, int, S_IRUSR); MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection in HDQ mode"); MODULE_AUTHOR("Texas Instruments"); MODULE_DESCRIPTION("HDQ-1W driver Library"); MODULE_LICENSE("GPL");