// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2017 Icenowy Zheng */ #include #include #include #include "ccu_common.h" #include "ccu_reset.h" #include "ccu_div.h" #include "ccu_gate.h" #include "ccu_mp.h" #include "ccu_nm.h" #include "ccu-sun50i-h6-r.h" /* * Information about AR100 and AHB/APB clocks in R_CCU are gathered from * clock definitions in the BSP source code. */ static const char * const ar100_r_apb2_parents[] = { "osc24M", "osc32k", "iosc", "pll-periph0" }; static const struct ccu_mux_var_prediv ar100_r_apb2_predivs[] = { { .index = 3, .shift = 0, .width = 5 }, }; static struct ccu_div ar100_clk = { .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), .mux = { .shift = 24, .width = 2, .var_predivs = ar100_r_apb2_predivs, .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), }, .common = { .reg = 0x000, .features = CCU_FEATURE_VARIABLE_PREDIV, .hw.init = CLK_HW_INIT_PARENTS("ar100", ar100_r_apb2_parents, &ccu_div_ops, 0), }, }; static CLK_FIXED_FACTOR_HW(r_ahb_clk, "r-ahb", &ar100_clk.common.hw, 1, 1, 0); static struct ccu_div r_apb1_clk = { .div = _SUNXI_CCU_DIV(0, 2), .common = { .reg = 0x00c, .hw.init = CLK_HW_INIT("r-apb1", "r-ahb", &ccu_div_ops, 0), }, }; static struct ccu_div r_apb2_clk = { .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), .mux = { .shift = 24, .width = 2, .var_predivs = ar100_r_apb2_predivs, .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), }, .common = { .reg = 0x010, .features = CCU_FEATURE_VARIABLE_PREDIV, .hw.init = CLK_HW_INIT_PARENTS("r-apb2", ar100_r_apb2_parents, &ccu_div_ops, 0), }, }; /* * Information about the gate/resets are gathered from the clock header file * in the BSP source code, although most of them are unused. The existence * of the hardware block is verified with "3.1 Memory Mapping" chapter in * "Allwinner H6 V200 User Manual V1.1"; and the parent APB buses are verified * with "3.3.2.1 System Bus Tree" chapter inthe same document. */ static SUNXI_CCU_GATE(r_apb1_timer_clk, "r-apb1-timer", "r-apb1", 0x11c, BIT(0), 0); static SUNXI_CCU_GATE(r_apb1_twd_clk, "r-apb1-twd", "r-apb1", 0x12c, BIT(0), 0); static SUNXI_CCU_GATE(r_apb1_pwm_clk, "r-apb1-pwm", "r-apb1", 0x13c, BIT(0), 0); static SUNXI_CCU_GATE(r_apb2_uart_clk, "r-apb2-uart", "r-apb2", 0x18c, BIT(0), 0); static SUNXI_CCU_GATE(r_apb2_i2c_clk, "r-apb2-i2c", "r-apb2", 0x19c, BIT(0), 0); static SUNXI_CCU_GATE(r_apb1_ir_clk, "r-apb1-ir", "r-apb1", 0x1cc, BIT(0), 0); static SUNXI_CCU_GATE(r_apb1_w1_clk, "r-apb1-w1", "r-apb1", 0x1ec, BIT(0), 0); /* Information of IR(RX) mod clock is gathered from BSP source code */ static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" }; static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir", r_mod0_default_parents, 0x1c0, 0, 5, /* M */ 8, 2, /* P */ 24, 1, /* mux */ BIT(31), /* gate */ 0); /* * BSP didn't use the 1-wire function at all now, and the information about * this mod clock is guessed from the IR mod clock above. The existence of * this mod clock is proven by BSP clock header, and the dividers are verified * by contents in the 1-wire related chapter of the User Manual. */ static SUNXI_CCU_MP_WITH_MUX_GATE(w1_clk, "w1", r_mod0_default_parents, 0x1e0, 0, 5, /* M */ 8, 2, /* P */ 24, 1, /* mux */ BIT(31), /* gate */ 0); static struct ccu_common *sun50i_h6_r_ccu_clks[] = { &ar100_clk.common, &r_apb1_clk.common, &r_apb2_clk.common, &r_apb1_timer_clk.common, &r_apb1_twd_clk.common, &r_apb1_pwm_clk.common, &r_apb2_uart_clk.common, &r_apb2_i2c_clk.common, &r_apb1_ir_clk.common, &r_apb1_w1_clk.common, &ir_clk.common, &w1_clk.common, }; static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = { .hws = { [CLK_AR100] = &ar100_clk.common.hw, [CLK_R_AHB] = &r_ahb_clk.hw, [CLK_R_APB1] = &r_apb1_clk.common.hw, [CLK_R_APB2] = &r_apb2_clk.common.hw, [CLK_R_APB1_TIMER] = &r_apb1_timer_clk.common.hw, [CLK_R_APB1_TWD] = &r_apb1_twd_clk.common.hw, [CLK_R_APB1_PWM] = &r_apb1_pwm_clk.common.hw, [CLK_R_APB2_UART] = &r_apb2_uart_clk.common.hw, [CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw, [CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw, [CLK_R_APB1_W1] = &r_apb1_w1_clk.common.hw, [CLK_IR] = &ir_clk.common.hw, [CLK_W1] = &w1_clk.common.hw, }, .num = CLK_NUMBER, }; static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = { [RST_R_APB1_TIMER] = { 0x11c, BIT(16) }, [RST_R_APB1_TWD] = { 0x12c, BIT(16) }, [RST_R_APB1_PWM] = { 0x13c, BIT(16) }, [RST_R_APB2_UART] = { 0x18c, BIT(16) }, [RST_R_APB2_I2C] = { 0x19c, BIT(16) }, [RST_R_APB1_IR] = { 0x1cc, BIT(16) }, [RST_R_APB1_W1] = { 0x1ec, BIT(16) }, }; static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = { .ccu_clks = sun50i_h6_r_ccu_clks, .num_ccu_clks = ARRAY_SIZE(sun50i_h6_r_ccu_clks), .hw_clks = &sun50i_h6_r_hw_clks, .resets = sun50i_h6_r_ccu_resets, .num_resets = ARRAY_SIZE(sun50i_h6_r_ccu_resets), }; static void __init sunxi_r_ccu_init(struct device_node *node, const struct sunxi_ccu_desc *desc) { void __iomem *reg; reg = of_io_request_and_map(node, 0, of_node_full_name(node)); if (IS_ERR(reg)) { pr_err("%pOF: Could not map the clock registers\n", node); return; } sunxi_ccu_probe(node, reg, desc); } static void __init sun50i_h6_r_ccu_setup(struct device_node *node) { sunxi_r_ccu_init(node, &sun50i_h6_r_ccu_desc); } CLK_OF_DECLARE(sun50i_h6_r_ccu, "allwinner,sun50i-h6-r-ccu", sun50i_h6_r_ccu_setup);