// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)

/dts-v1/;

#include "ipq8074.dtsi"
#include "ipq8074-audio.dtsi"
#include "ipq8074-hk-cpu.dtsi"
#include "ipq8074-avm-common.dtsi"

/ {
	model = "AVM FRITZ!Repeater 6000";

	avm_netdev_map {
		compatible = "avm,port_netdev";

		lan1 {
			netdev = "eth0";
		};
		lan2 {
			netdev = "eth1";
		};
	};

	avm-rt-framework {
		compatible = "avm,rt_framework";

		ipi-gic-sgi = <9>, <10>, <11>, <12>, <13>, <14>;
	};

};

&soc {
	mdio: mdio@90000 {
		pinctrl-0 = <&mdio_pins>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-0 = <&mdio_pins>;
		pinctrl-names = "default";
		phy-reset-gpio = <&tlmm 37 0 &tlmm 43 1>;
		avm,clk_div = <0x3>;

		phy0: ethernet-phy@0 {
			reg = <0>;
		};
		phy1: ethernet-phy@1 {
			reg = <28>;
		};
	};

	ess_switch: ess-switch@3a000000 {
		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
		switch_lan_bmp = <0x42>; /* lan port bitmap */
		switch_wan_bmp = <0x00>; /* wan port bitmap */
		switch_mac_mode = <0xf>; /* mac mode for uniphy instance0 - PORT_WRAPPER_SGMII_CHANNEL0 */
		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1 - PORT_WRAPPER_MAX */
		switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2 - PORT_WRAPPER_SGMII_CHANNEL0 */
		/* qca808x on uniphy2 supports SGMII and SGMII+ */
		/* TODO: Setting this to 1 (enterprise) somehow blocks tx path
		 *       for ethernet? Why?
		 */
		bm_tick_mode = <0>; /* bm tick mode */
		tm_tick_mode = <0>; /* tm tick mode */
		qcom,port_phyinfo {
			port@0 {
				port_id = <1>;
				phy_address = <0>;
			};
			/* Ports 1..4 are unused, but still need to have nodes
			 * here because of qsdk init quirks.
			 */
			port@1 {
				port_id = <2>;
				phy_address = <1>;
			};
			port@2 {
				port_id = <3>;
				phy_address = <2>;
			};
			port@3 {
				port_id = <4>;
				phy_address = <3>;
			};
			port@4 {
				port_id = <5>;
				phy_address = <4>;
			};
			port@5 {
				port_id = <6>;
				phy_address = <28>;
				port_mac_sel = "QGMAC_PORT";
			};
		};
	};

	dp1: dp1 {
		device_type = "network";
		compatible = "qcom,nss-dp";
		qcom,id = <1>;
		reg = <0x3a001000 0x200>;
		qcom,mactype = <0>;  /* QCOM GMAC */
		local-mac-address = [000000000000];
		macname = "maca";
		devname = "eth1";
		qcom,link-poll = <1>;
		qcom,phy-mdio-addr = <0>;
		phy-mode = "sgmii";
	};

	dp6 {
		device_type = "network"; /* Not used? */
		compatible = "qcom,nss-dp";
		qcom,id = <6>;  /* MAC port */
		reg = <0x3a007000 0x3fff>;
		qcom,mactype = <1>; /* Third party 10G/XGMAC */
		local-mac-address = [000000000000];
		macname = "maca";
		devname = "eth0";
		qcom,link-poll = <1>;
		qcom,phy-mdio-addr = <28>;
		phy-mode = "sgmii"; /* Not used? */
	};
};

&tlmm {
	pwm_pins: pwm_pinmux {
		mux_1 {
			pins = "gpio25";
			function = "pwm02";
			drive-strength = <8>;
		};
	};

	button_pins: button_pins {
		button_connect {
			pins = "gpio46";
			function = "gpio";
			bias-disable;
		};
	};
};

&serial_blsp4 {
	pinctrl-0 = <&uart_pins>;
	pinctrl-names = "default";
	status = "ok";
};

#ifndef __IPQ_MEM_PROFILE_256_MB__
&nss_crypto {
	status = "ok";
};
#endif

&msm_imem {
	status = "disabled";
};

&ssphy_0 {
	qcom,emulation = <1>;
	status = "ok";
};

&qusb_phy_0 {
	qcom,emulation = <1>;
	status = "ok";
};

&ssphy_1 {
	qcom,emulation = <1>;
	status = "ok";
};

&qusb_phy_1 {
	qcom,emulation = <1>;
	status = "ok";
};

&usb3_0 {
	status = "ok";
};

&usb3_1 {
	status = "ok";
};

&cryptobam {
	status = "ok";
};

&crypto {
	status = "ok";
};

&i2c_0 {
	pinctrl-0 = <&i2c_0_pins>;
	pinctrl-names = "default";
	status = "disabled";
};

&i2c_1 {
	status = "disabled";
};

&sdhc_1 {
	qcom,clk-rates = <400000 25000000 50000000 100000000 \
			 192000000 384000000>;
	qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";
	qcom,nonremovable;
	status = "ok";
};

&qpic_bam {
	status = "ok";
};

&nand {
	pinctrl-0 = <&qpic_pins>;
	pinctrl-names = "default";
	status = "disabled";
};

&sdhc_2 {
	qcom,clk-rates = <400000 25000000 50000000 100000000 \
			 192000000>;
	qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
	pinctrl-0 = <&sd_pins>;
	pinctrl-names = "default";
	cd-gpios = <&tlmm 63 1>;
	sd-ldo-gpios = <&tlmm 21 0>;
	vqmmc-supply = <&ldo11>;
	status = "disabled";
};

&mdio_pins {
/* PHY reset pins need to be open drain. */
	rst {
		pins = "gpio37", "gpio43";
		function = "gpio";
		bias-disable;
	};
};

&q6v5_wcss {
	qcom,nosecure;
};

&pcie0 {
	status = "disabled";
};

&pcie1 {
	status = "disabled";
};