// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)

/dts-v1/;

#include "ipq5018.dtsi"
#include "ipq5018-avm-common.dtsi"
#include <dt-bindings/pwm/pwm.h>

/ {
	model = "AVM FRITZ!Box 7510";

	#address-cells = <0x2>;
	#size-cells = <0x2>;

	interrupt-parent = <&intc>;

	/delete-property/ MP_256;
	MP_512;

	dect_gpio: dect-gpio {
		compatible = "avm,gpio-aggregator";
		gpios = <&tlmm 15 GPIO_ACTIVE_HIGH>,
				<&tlmm 12 GPIO_ACTIVE_HIGH>;
		gpio-line-names = "DECT_RST", "DECT_RD";
	};
	/* measure clock and fs from tdm-interface (piglet, pcmlink) */
	tdmclkfs_gpio: tdmclkfs-gpio {
		compatible = "avm,gpio-aggregator";
		gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>,
			<&tlmm 24 GPIO_ACTIVE_HIGH>;
		gpio-line-names = "TDM_FS", "TDM_CLK";
	};

	avm_netdev_map {
		compatible = "avm,port_netdev";

		lan1 {
			netdev = "eth0";
		};
	};

	avm-rt-framework {
		compatible = "avm,rt_framework";

		ipi-gic-sgi = <9>, <10>, <11>, <12>, <13>, <14>;
	};

	aliases {
		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
		serial0 = &blsp1_uart1;
		serial1 = &blsp1_uart2;
		ethernet0 = "/soc/dp1";
		ethernet1 = "/soc/dp2";
	};

	chosen {
		bootargs-append = " swiotlb=1";
		stdout-path = "serial0";
	};

	reserved-memory {
		/delete-node/ nss@40000000;

		nss@40000000 {
			no-map;
			reg = <0x0 0x40000000 0x0 0x0800000>;
		};

		q6_region: wcnss@4b000000 {
			no-map;
			reg = <0x0 0x4b000000 0x0 0x01700000>;
		};

		m3_dump@4c700000 {
			no-map;
			reg = <0x0 0x4C700000 0x0 0x100000>;
		};

		q6_etr_region:q6_etr_dump@4c800000 {
			no-map;
			reg = <0x0 0x4c800000 0x0 0x100000>;
		};
	};

	soc {
		serial@78af000 {
			status = "ok";
			pinctrl-0 = <&blsp0_uart_pins>;
			pinctrl-names = "default";
		};

		serial@78b0000 {
			status = "ok";
			pinctrl-0 = <&blsp1_uart_pins>;
			pinctrl-names = "default";
		};

		qpic_bam: dma@7984000{
			status = "ok";
		};

		nand: qpic-nand@79b0000 {
			pinctrl-0 = <&qspi_nand_pins>;
			pinctrl-names = "default";
			status = "ok";
		};

		mdio0: mdio@88000 {
			#address-cells = <1>;
			#size-cells = <0>;
			status = "ok";

			ethernet-phy@0 {
				reg = <7>;
			};
		};

		ess-instance {
			num_devices = <0x1>;
			#address-cells = <1>;
			#size-cells = <0>;
			ess-switch@0x39c00000 {
				switch_mac_mode = <0xff>; /* PORT_WRAPPER_MAX (nothing connected) */
				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
				qcom,port_phyinfo {
					port@0 {
						port_id = <1>;
						phy_address = <7>;
						mdiobus = <&mdio0>;
					};
					port@1 {
						status = "disabled";
					};
				};
			};
		};

		q6v5_wcss@CD00000 {
			memory-region = <&q6_region>, <&q6_etr_region>;
		};

		nss-common {
			avm,mem-profile-medium;
		};

		dp1 {
			device_type = "network";
			compatible = "qcom,nss-dp";
			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
			clock-names = "nss-snoc-gmac-axi-clk";
			qcom,id = <1>;
			reg = <0x39C00000 0x10000>;
			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
			qcom,mactype = <2>;
			qcom,link-poll = <1>;
			qcom,phy-mdio-addr = <7>;
			mdio-bus = <&mdio0>;
			local-mac-address = [000000000000];
			phy-mode = "sgmii";
			macname = "maca";
		};

		dp2 {
			status = "disabled";
			device_type = "network";
			compatible = "qcom,nss-dp";
			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
			clock-names = "nss-snoc-gmac-axi-clk";
			qcom,id = <2>;
			reg = <0x39D00000 0x10000>;
			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
			qcom,mactype = <2>;
			qcom,link-poll = <1>;
			qcom,phy-mdio-addr = <4>;
			mdio-bus = <&mdio1>;
			local-mac-address = [000000000000];
			phy-mode = "sgmii";
                };

		qcom,test@0 {
			status = "ok";
		};

		lpass: lpass@0xA000000 {
			status = "ok";
		};

		audio_mclk {
			status = "ok";
		};

		pcm_avm: pcm_avm@0xA3C0000 {
			status = "ok";
		};

		pcm_lb: pcm_lb@0 {
			status = "ok";
		};
	};

	avm-usb-en-gpio {
		compatible = "avm,gpio-aggregator";
		pinctrl-0 = <&usb_pw_en_pins>;
		pinctrl-names = "default";

		gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
		gpio-line-names = "usb-pwr-en";
	};
};

&sdhc_1 {
	status = "disabled";
};

&pwm {
	pinctrl-0 = <&pwm_pins>;
	pinctrl-names = "default";
	used-pwm-indices = <0>, <0>, <1>, <0>;
	status = "ok";
	#pwm-cells = <3>;
};

&tlmm {
	blsp0_uart_pins: blsp0_uart_pins {
		blsp0_uart_rx {
			pins = "gpio21";
			function = "blsp0_uart0";
			drive-strength = <8>;
		};
		blsp0_uart_tx {
			pins = "gpio20";
			function = "blsp0_uart0";
			drive-strength = <8>;
		};
	};

	blsp1_uart_pins: blsp1_uart_pins {
		blsp1_uart_rx {
			pins = "gpio12";
			function = "blsp1_uart0";
			drive-strength = <8>;
		};
		blsp1_uart_tx {
			pins = "gpio11";
			function = "blsp1_uart0";
			drive-strength = <8>;
		};
	};

	qspi_nand_pins: qspi_nand_pins {
		qspi_clock {
			pins = "gpio9";
			function = "qspi_clk";
			drive-strength = <8>;
			bias-disable;
		};
		qspi_cs {
			pins = "gpio8";
			function = "qspi_cs";
			drive-strength = <8>;
			bias-disable;
		};
		qspi_data {
			pins = "gpio4", "gpio5", "gpio6", "gpio7";
			function = "qspi_data";
			drive-strength = <8>;
			bias-disable;
		};
	};

	pwm_pins: pwm_pinmux {
		mux_1 {
			pins = "gpio2";
			function = "pwm2";
			drive-strength = <16>;
		};
	};

	usb_pw_en_pins: usb_pwr_en_pinmux {
		pins = "gpio18";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	avm_led_pins: avm_led_pins {
		mux {
			pins = "gpio10", "gpio13", "gpio16", "gpio17", "gpio19", "gpio36", "gpio37", "gpio43", "gpio46";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};
};

&pcie_x1phy {
	status = "disabled";
};

&pcie_x1 {
	status = "disabled";
};

&pcie_x2phy {
	status = "ok";
};

&pcie_x2 {
	status = "ok";
	perst-gpio = <&tlmm 38 1>;
	avm,host_magic;
};

&eud {
	status = "ok";
};

&dwc_0 {
	/delete-property/ #phy-cells;
	/delete-property/ phys;
	/delete-property/ phy-names;
};

&hs_m31phy_0 {
	status = "ok";
};

&usb3 {
	status = "ok";
};

&pcie_x1_rp {
	#address-cells = <5>;
	#size-cells = <0>;
	mhi_0: qcom,mhi@0 {
		reg = <0 0 0 0 0 >;
	};
};

&qfprom {
	status = "ok";
};

&tsens {
	status = "ok";
};

/*
&qgic_msi_0 {
	status = "ok";
};

&qgic_msi_1 {
	status = "ok";
};
*/

&q6v5_wcss {
	qcom,nosecure;
	/* IPQ5018 */
	q6v5_wcss_userpd1 {
		m3_firmware = "IPQ5018/m3_fw.mdt";
		interrupts-extended = <&wcss_smp2p_in 8 0>,
			<&wcss_smp2p_in 9 0>,
			<&wcss_smp2p_in 12 0>,
			<&wcss_smp2p_in 11 0>;
		interrupt-names ="fatal",
			"ready",
			"spawn_ack",
			"stop-ack";
		qcom,smem-states = <&wcss_smp2p_out 8>,
			<&wcss_smp2p_out 9>,
			<&wcss_smp2p_out 10>;
		qcom,smem-state-names = "shutdown",
			"stop",
			"spawn";
		qca,asid = <1>;
		qca,auto-restart;
		qca,int_radio;
	};

};

&wifi0 {
	/* IPQ5018 */
	qcom,tgt-mem-mode = <2>;
	qcom,board_id = <0x23>;
	qcom,bdf-addr = <0x4ba00000 0x4ba00000 0x4ba00000 0x0 0x0>;
	qcom,caldb-addr = <0x0 0x0 0 0 0>;
	qcom,caldb-size = <0x0>;
	status = "ok";
};