// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)

/dts-v1/;

#include "ipq9574-avm-common.dtsi"
#include "ipq9574-wkk-default-memory.dtsi"
#include <dt-bindings/pwm/pwm.h>

/ {
	#address-cells = <0x2>;
	#size-cells = <0x2>;
	model = "FRITZ!Box 4690";

	aliases {
		/delete-property/ serial1;
		/delete-property/ serial3;
	};

	dect_gpio: dect-gpio {
		compatible = "avm,gpio-aggregator";
		gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>,
				<&tlmm 17 GPIO_ACTIVE_HIGH>;
		gpio-line-names = "DECT_RST", "DECT_RD";
	};
	/* measure clock and fs from tdm-interface (piglet, pcmlink) */
	tdmclkfs_gpio: tdmclkfs-gpio {
		compatible = "avm,gpio-aggregator";
		gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>,
			<&tlmm 44 GPIO_ACTIVE_HIGH>;
		gpio-line-names = "TDM_FS", "TDM_CLK";
	};

	avm-hui {
		compatible = "avm,hui";
		pinctrl-0 = <&avm_led_pins>;
		pinctrl-names = "default";
		status = "ok";

		dim_leds: dim-leds {
			brightness-range = <0>, <255>;
			compatible = "avm,hui-generic-led-pwm";
			led-type = "default-on";
			/* GPIO 47 is channel 30 */
			pwms = <&pwm 3 100000>;
			dimmable;
		};

		box-power@0 {
			compatible = "avm,hui-generic-led-gpio";
			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
			location = <1>;
		};

		box-wlan@0 {
			compatible = "avm,hui-generic-led-gpio";
			gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
			location = <2>;
		};

		box-fon-dect@0 {
			compatible = "avm,hui-generic-led-gpio";
			gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
			location = <3>;
		};

		connect@0 {
			compatible = "avm,hui-generic-led-gpio";
			gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
			location = <4>;
		};

		box_info: info {
			compatible = "avm,hui-generic-led-gpio";
			gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>,
					<&tlmm 27 GPIO_ACTIVE_HIGH>;
			location = <5>;
			colors {
					normal = <0x00>, <0xFF>, <0x00>;
					error  = <0xFF>, <0x00>, <0x00>;
			};
		};

		box-wlan@1 {
			compatible = "avm,hui-generic-button-gpio";
			gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
		};

		box-fon@1 {
			compatible = "avm,hui-generic-button-gpio";
			gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
		};

		box-connect@1 {
			compatible = "avm,hui-generic-button-gpio";
			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
		};
	};

	soc {
		pinctrl@1000000 {
			/* ina2xx pins*/
			i2c_1_pins: i2c-1-pins {
				pins = "gpio36", "gpio37"; /* SCL, SDA */
				function = "blsp1_i2c";
				drive-strength = <8>;
				bias-disable;
			};

			usb_pw_en_pins: usb_pwr_en_pinmux {
				pins = "gpio12";
				function = "gpio";
				drive-strength = <8>;
				bias-disable;
				output-low;
			};

			avm_pwm_pins: avm_pwm_pins {
				mux {
					pins = "gpio47";
					function = "pwm30";
					drive-strength = <8>;
				};
			};

			avm_led_pins: avm_led_pins {
				mux {
					pins = "gpio25", "gpio26", "gpio27", "gpio61", "gpio62", "gpio63", "gpio64", "gpio40";
					function = "gpio";
					drive-strength = <2>;
					bias-disable;
				};
			};

			/* ina2xx alert pin */
			ina2xx_alert_pin: ina2xx-alert-pin {
				pins = "gpio32";
				drive-strength = <8>;
				bias-disable;
			};
		};

		avm_mac_addr_maceth_0: dp6 {
			status = "ok";
			devname = "eth0";
			mac-address = [000000000000];
			qcom,mactype = <0>;
			qcom,phy-mdio-addr = <0>;
		};
		avm_mac_addr_maceth_4: dp5 {
			status = "ok";
			devname = "wan";
			mac-address = [000000000000];
			qcom,mactype = <0>;
			qcom,phy-mdio-addr = <8>;
		};
		avm_mac_addr_maceth_1: dp4 {
			status = "ok";
			devname = "eth1";
			mac-address = [000000000000];
			qcom,phy-mdio-addr = <4>;
		};
		avm_mac_addr_maceth_2: dp3 {
			status = "ok";
			devname = "eth2";
			mac-address = [000000000000];
			qcom,phy-mdio-addr = <3>;
		};
		avm_mac_addr_maceth_3: dp2 {
			status = "ok";
			devname = "eth3";
			mac-address = [000000000000];
			qcom,phy-mdio-addr = <2>;
		};

		mdio: mdio@90000 {
			#address-cells = <0x1>;
			#size-cells = <0x0>;
			status = "ok";
			pinctrl-0 = <&mdio_pins>;
			pinctrl-names = "default";
			/* Do not touch AQR Reset, as its FW is lost otherwise */
			phy-reset-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;  /* MHT Reset */
			phyaddr_fixup = <0xC90F018>;
			uniphyaddr_fixup = <0xC90F014>;
			mdio_clk_fixup; /* MDIO clock sequence fix up flag */

			phy0: ethernet-phy@0 {
				reg = <1>;
				fixup;
			};
			phy1: ethernet-phy@1 {
				reg = <2>;
				fixup;
			};
			phy2: ethernet-phy@2 {
				reg = <3>;
				fixup;
			};
			phy3: ethernet-phy@3 {
				reg = <4>;
				fixup;
			};
			phy4: ethernet-phy@4 {
				reg = <8>;
				compatible ="ethernet-phy-ieee802.3-c45";
			};
			phy5: ethernet-phy@5 {
				reg = <0>;
				compatible ="ethernet-phy-ieee802.3-c45";
			};
		};

		ess-instance {
			num_devices = <0x1>;
			ess-switch@3a000000 {
				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
				switch_lan_bmp = <0x3e>; /* lan port bitmap */
				switch_wan_bmp = <0x40>; /* wan port bitmap */
				switch_mac_mode = <0x15>; /* mac mode for uniphy instance0*/
				switch_mac_mode1 = <0xd>; /* mac mode for uniphy instance1*/
				switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/
				bm_tick_mode = <0>; /* bm tick mode */
				tm_tick_mode = <1>; /* tm tick mode */

				qcom,port_phyinfo {
					port@0 {
						port_id = <1>;
						phy_address = <1>;
					};
					port@1 {
						port_id = <2>;
						phy_address = <2>;
					};
					port@2 {
						port_id = <3>;
						phy_address = <3>;
					};
					port@3 {
						port_id = <4>;
						phy_address = <4>;
					};
					port@4 {
						port_id = <5>;
						phy_address = <8>;
						ethernet-phy-ieee802.3-c45;
					};
					port@5 {
						port_id = <6>;
						phy_address = <0>;
						ethernet-phy-ieee802.3-c45;
					};

				};
			};
		};

		pcie0_x1: pci@28000000 {
			perst-gpio = <&tlmm 23 1>;
			status = "ok";
			max-payload-size = <1>;
			pcie0_rp {
				#address-cells = <5>;
				#size-cells = <0>;
				reg = <0 0 0 0 0>;

				wifi@0 {
					reg = <0 0 0 0 0>;
					license-file = "qcn9224/license.dat";
					qrtr_node_id = <0x30>;
					memory-region = <0>,<&mhi_region0>;
					qti,disable-rddm-prealloc;
					qti,rddm-seg-len = <0x1000>;
					status = "ok";
				};
			};
		};

		pcie0_phy: phy@84000 {
			status = "ok";
		};

		pcie1_x1: pci@10000000 {
			status = "disabled";
		};

		pcie1_phy: phy@fc000 {
			status = "disabled";
		};

		pcie2_x2: pci@20000000 {
			status = "disabled";
		};

		pcie2_phy: phy@8c000 {
			status = "disabled";
		};
	};

	avm-usb-en-gpio {
		compatible = "avm,gpio-aggregator";
		pinctrl-0 = <&usb_pw_en_pins>;
		pinctrl-names = "default";

		gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
		gpio-line-names = "usb-pwr-en";
	};
};

&edma {
	/delete-property/ qcom,ppeds-num;
	/delete-property/ interrupts;

	qcom,ppeds-num = <1>;			/* Number of PPEDS nodes */
	/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
	qcom,ppeds-map = <1 1 1 1 32 8>;	/* PPEDS Node#0 ring and queue map */
	interrupts = <0 367 4>,			/* Tx complete ring id #4 IRQ info */
				   <0 368 4>,			/* Tx complete ring id #5 IRQ info */
				   <0 369 4>,			/* Tx complete ring id #6 IRQ info */
				   <0 370 4>,			/* Tx complete ring id #7 IRQ info */
				   <0 371 4>,			/* Tx complete ring id #8 IRQ info */
				   <0 372 4>,			/* Tx complete ring id #9 IRQ info */
				   <0 373 4>,			/* Tx complete ring id #10 IRQ info */
				   <0 374 4>,			/* Tx complete ring id #11 IRQ info */
				   <0 375 4>,			/* Tx complete ring id #12 IRQ info */
				   <0 376 4>,			/* Tx complete ring id #13 IRQ info */
				   <0 377 4>,			/* Tx complete ring id #14 IRQ info */
				   <0 378 4>,			/* Tx complete ring id #15 IRQ info */
				   <0 379 4>,			/* Tx complete ring id #16 IRQ info */
				   <0 380 4>,			/* Tx complete ring id #17 IRQ info */
				   <0 381 4>,			/* Tx complete ring id #18 IRQ info */
				   <0 382 4>,			/* Tx complete ring id #19 IRQ info */
				   <0 383 4>,			/* Tx complete ring id #20 IRQ info */
				   <0 384 4>,			/* Tx complete ring id #21 IRQ info */
				   <0 509 4>,			/* Tx complete ring id #22 IRQ info */
				   <0 508 4>,			/* Tx complete ring id #23 IRQ info */
				   <0 507 4>,			/* Tx complete ring id #24 IRQ info */
				   <0 506 4>,			/* Tx complete ring id #25 IRQ info */
				   <0 505 4>,			/* Tx complete ring id #26 IRQ info */
				   <0 504 4>,			/* Tx complete ring id #27 IRQ info */
				   <0 503 4>,			/* Tx complete ring id #28 IRQ info */
				   <0 502 4>,			/* Tx complete ring id #29 IRQ info */
				   <0 501 4>,			/* Tx complete ring id #30 IRQ info */
				   <0 500 4>,			/* Tx complete ring id #31 IRQ info */
				   <0 351 4>,			/* Rx desc ring id #20 IRQ info */
				   <0 352 4>,			/* Rx desc ring id #21 IRQ info */
				   <0 353 4>,			/* Rx desc ring id #22 IRQ info */
				   <0 354 4>,			/* Rx desc ring id #23 IRQ info */
				   <0 261 4>,			/* Misc error IRQ info */
				   <0 364 4>,			/* PPEDS Node #0(TxComp ring id #1) TxComplete IRQ info */
				   <0 332 4>,			/* PPEDS Node #0(Rx Desc ring id #1) Rx Desc IRQ info */
				   <0 356 4>;			/* PPEDS Node #0(RxFill Desc ring id #1) Rx Fill IRQ info */
};

&q6_region {
	status = "ok";
};

&m3_dump {
	status = "ok";
};

&q6_etr_region {
	status = "ok";
};

&q6_caldb_region {
	status = "ok";
};

&wifi0 {
	qcom,board_id = <0x10>;
	status = "ok";
};

&qcn9224_pcie0 {
	status = "ok";
};

&mhi_region0 {
	status = "ok";
	size = <0x0 0x00f00000>;
};

&mlo_global_mem0 {
	size = <0x0 0xD00000>;
	status = "ok";
};

&wifi4 {
	hremote_node = <&qcn9224_pcie0>;
	board_id = <0x0002>;
	status = "ok";
};

&i2c_1 {
	pinctrl-0 = <&i2c_1_pins>;
	pinctrl-names = "default";
	status = "ok";

	ina236@40 {
		compatible = "ti,ina236";
		reg = <0x40>;
		pinctrl-0 = <&ina2xx_alert_pin>;
		pinctrl-names = "default";
		shunt-resistor = <15000>;
		interrupts-extended = <&tlmm 32 IRQ_TYPE_EDGE_FALLING>;
		interrupt-names = "alert";
		alert-type = <12>; /* bus undervoltage */
		alert-limit = <10800>; /* 10,8V */
	};
};

&pwm {
	pinctrl-0 = <&avm_pwm_pins>;
	used-pwm-indices = <0>, <0>, <0>, <1>;
	pinctrl-names = "default";
	#pwm-cells = <2>;
	status = "ok";
};

/* start of pcmlink */
&lpass {
	status = "ok";
};

&pcm_avm {
	status = "ok";
};
/* end of pcmlink */

/* Remove unused AVM special MAC address definitions */
/delete-node/ &avm_mac_addr_macrouter_3;