--- zzzz-none-000/linux-5.4.213/drivers/regulator/Kconfig	2022-09-15 10:04:56.000000000 +0000
+++ alder-5690pro-762/linux-5.4.213/drivers/regulator/Kconfig	2024-08-14 09:02:08.000000000 +0000
@@ -1105,5 +1105,46 @@
 	  This driver provides support for the voltage regulators on the
 	  WM8994 CODEC.
 
+config REGULATOR_CPR3
+        bool "CPR3 regulator core support"
+        help
+          This driver supports Core Power Reduction (CPR) version 3 controllers
+          which are used by some Qualcomm Technologies, Inc. SoCs to
+          manage important voltage regulators.  CPR3 controllers are capable of
+          monitoring several ring oscillator sensing loops simultaneously.  The
+          CPR3 controller informs software when the silicon conditions require
+          the supply voltage to be increased or decreased.  On certain supply
+          rails, the CPR3 controller is able to propagate the voltage increase
+          or decrease requests all the way to the PMIC without software
+          involvement.
+
+config REGULATOR_CPR3_NPU
+        bool "CPR3 regulator for NPU"
+        depends on OF && REGULATOR_CPR3
+        help
+          This driver supports Qualcomm Technologies, Inc. NPU CPR3
+          regulator Which will always operate in open loop.
+
+config REGULATOR_CPR4_APSS
+        bool "CPR4 regulator for APSS"
+        depends on OF && REGULATOR_CPR3
+        help
+          This driver supports Qualcomm Technologies, Inc. APSS application
+          processor specific features including memory array power mux (APM)
+          switching, one CPR4 thread which monitor the two APSS clusters that
+          are both powered by a shared supply, hardware closed-loop auto
+          voltage stepping, voltage adjustments based on online core count,
+          voltage adjustments based on temperature readings, and voltage
+          adjustments for performance boost mode. This driver reads both initial
+          voltage and CPR target quotient values out of hardware fuses.
+
+config REGULATOR_QTI_GPIO
+        bool "QTI GPIO regulator driver"
+        depends on REGULATOR_GPIO
+        help
+          This driver supports Qualcomm Technologies, Inc. GPIO regulator
+          can be used for boards with discrete regulators which voltage will
+          be controlled using REGULATOR_GPIO driver.
+
 endif