/*------------------------------------------------------------------------------------------*\
 *
 * Hardware Config für FRITZ!Box Fon 3490
 *
\*------------------------------------------------------------------------------------------*/

#undef AVM_HARDWARE_CONFIG
#define AVM_HARDWARE_CONFIG  avm_hardware_config_hw212


struct _avm_hw_config AVM_HARDWARE_CONFIG[] = {


    /****************************************************************************************\
     *
     * GPIO Config
     *
    \****************************************************************************************/


    /*------------------------------------------------------------------------------------------*\
     * LEDs / Taster
    \*------------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_led_power",  /* led5 */
        .value  = 45,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },
    {
        .name   = "gpio_avm_led_lan_all",  /* led4 */
        .value  = 47,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },
    {
        .name   = "gpio_avm_led_wlan",  /* led3 */
        .value  = 36,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },
    {
        .name   = "gpio_avm_led_pppoe",  /* led2 */
        .value  = 35,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },
    {
        .name   = "gpio_avm_led_info", /* led1 */
        .value  = 33,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },
    {
        .name   = "gpio_avm_led_info_red",
        .value  = 46,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },

    /*--- WPS button connected to EXTIN 1 ---*/
    {
        .name   = "gpio_avm_button_wps",
        .value  = 1,
        .param  = avm_hw_param_gpio_in_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN  | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET   | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR 
        }
    },
    /*--- WLAN button connected to EXTIN 0 ---*/
    {
        .name   = "gpio_avm_button_wlan",
        .value  = 29,
        .param  = avm_hw_param_gpio_in_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN  | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET   | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET 
        }
    },


    /*--------------------------------------------------------------------------------------*\
     * SPI
    \*--------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_spi_clk",
        .value  = 18,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_SSC,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },
    {
        .name   = "gpio_avm_spi_do",
        .value  = 17,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_SSC,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },
    {
        .name   = "gpio_avm_spi_di",
        .value  = 16,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_SSC,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },
    {
        .name   = "gpio_avm_spi_flash_cs",
        .value  = 10,
        .param  = avm_hw_param_gpio_out_active_high,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_SPI_FLASH,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },


    /*--------------------------------------------------------------------------------------*\
     * NAND
    \*--------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_nand_ale",
        .value  = 13,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_NAND,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },
    {
        .name   = "gpio_avm_nand_cle",
        .value  = 24,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_NAND,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },
    {
        .name   = "gpio_avm_nand_rd",
        .value  = 49,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_NAND,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },
    {
        .name   = "gpio_avm_nand_rd_by",
        .value  = 48,
        .param  = avm_hw_param_gpio_in_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_NAND,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },
    {
        .name   = "gpio_avm_nand_cs1",
        .value  = 23,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_NAND,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },


    /*--------------------------------------------------------------------------------------*\
     * USB
    \*--------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_usb_power_enable",
        .value  = 14,
        .param  = avm_hw_param_gpio_out_active_high,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_USB | IFX_GPIO_MODULE_EARLY_REGISTER,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },


    /*--------------------------------------------------------------------------------------*\
     * ETHERNET
    \*--------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_extphy_25mhz",
        .value  =  3,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_EXTPHY_25MHZ_CLOCK,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },
    {
        .name   = "gpio_avm_extphy1_reset",
        .value  = 32,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_EXTPHY_RESET,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR| IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },
    {
        .name   = "gpio_avm_extphy2_reset",
        .value  = 44,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_EXTPHY_RESET,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR| IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },
    /*--- ExtPhy Irq connected to EXTIN 3 ---*/
    {
        .name   = "gpio_avm_extphy_int",
        .value  = 39,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
           .module_id = IFX_GPIO_MODULE_EXTPHY_INT,
           .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET
        }
    },
    {
        .name   = "gpio_avm_mii_mdio",
        .value  = 42,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_EXTPHY_MDIO,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET   | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },
    {
        .name   = "gpio_avm_mii_mdc",
        .value  = 43,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_EXTPHY_MDIO,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET   | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },


    /*--------------------------------------------------------------------------------------*\
     * PCIE / WLAN / Ext. WASP
    \*--------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_pcie_reset0",
        .value  = 21,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_PCIE,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET 
        }
    },
    {
        .name   = "gpio_avm_pcie_chip_reset0",
        .value  = 22,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_PCIE,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET 
        }
    },
    {
        .name   = "gpio_avm_offload_wasp_wakeup",
        .value  =  5,
        .param  = avm_hw_param_gpio_out_active_high,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_WLAN_OFFLOAD_WASP_RESET,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR| IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET
        }
    },
    {
        .name   = "gpio_avm_offload_wasp_reset",
        .value  = 34,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_WLAN_OFFLOAD_WASP_RESET,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR| IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET
        }
    },
    {
        .name   = "gpio_avm_offload_scrpn_uart",
        .value  =  31,
        .param  = avm_hw_param_gpio_out_active_high,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_WLAN_OFFLOAD_SCRPN_UART,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR| IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET
        }
    },
    /*----
    {
        .name   = "gpio_avm_offload_mac",
        .value  =  5,
        .param  = avm_hw_param_no_param,
    },
    ----*/



    /*--------------------------------------------------------------------------------------*\
     * SYSTEM
    \*--------------------------------------------------------------------------------------*/
    /*---
    {
        .name   = "gpio_avm_usb_int",
        .value  =  2,
        .param  = avm_hw_param_no_param,
    },
    ---*/
    {
        .name   = "gpio_avm_boot_sel3",
        .value  =  4,
        .param  = avm_hw_param_gpio_in_active_high,
    },



    {   .name   = NULL }
};
EXPORT_SYMBOL(AVM_HARDWARE_CONFIG);