/* chronyd/chronyc - Programs for keeping computer clocks accurate. ********************************************************************** * Copyright (C) Richard P. Curnow 1997-2003 * Copyright (C) Miroslav Lichvar 2009-2011 * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. * ********************************************************************** ======================================================================= Core NTP protocol engine */ #include "sysincl.h" #include "ntp_core.h" #include "ntp_io.h" #include "memory.h" #include "sched.h" #include "reference.h" #include "local.h" #include "sources.h" #include "util.h" #include "conf.h" #include "logging.h" #include "keys.h" #include "md5.h" #include "addrfilt.h" #include "clientlog.h" /* ================================================== */ static LOG_FileID logfileid; /* ================================================== */ /* Day number of 1 Jan 1970 */ #define MJD_1970 40587 /* ================================================== */ /* Enumeration used for remembering the operating mode of one of the sources */ typedef enum { MD_OFFLINE, /* No sampling at all */ MD_ONLINE, /* Normal sampling based on sampling interval */ MD_BURST_WAS_OFFLINE, /* Burst sampling, return to offline afterwards */ MD_BURST_WAS_ONLINE, /* Burst sampling, return to online afterwards */ } OperatingMode; /* ================================================== */ /* Structure used for holding a single peer/server's protocol machine */ struct NCR_Instance_Record { NTP_Remote_Address remote_addr; /* Needed for routing transmit packets */ NTP_Mode mode; /* The source's NTP mode (client/server or symmetric active peer) */ OperatingMode opmode; /* Whether we are sampling this source or not and in what way */ int timer_running; /* Boolean indicating whether we have a timeout pending to transmit to the source */ SCH_TimeoutID timeout_id; /* Scheduler's timeout ID, if we are running on a timer. */ int auto_offline; /* If 1, automatically go offline if server/peer isn't responding */ int local_poll; /* Log2 of polling interval at our end */ int remote_poll; /* Log2 of server/peer's polling interval (recovered from received packets) */ int presend_minpoll; /* If the current polling interval is at least this, an echo datagram will be send some time before every transmit. This ensures that both us and the server/peer have an ARP entry for each other ready, which means our measurement is not botched by an ARP round-trip on one side or the other. */ int presend_done; /* The presend packet has been sent */ int minpoll; /* Log2 of minimum defined polling interval */ int maxpoll; /* Log2 of maximum defined polling interval */ int min_stratum; /* Increase stratum in received packets to the minimum */ int poll_target; /* Target number of sourcestats samples */ double poll_score; /* Score of current local poll */ double max_delay; /* Maximum round-trip delay to the peer that we can tolerate and still use the sample for generating statistics from */ double max_delay_ratio; /* Largest ratio of delta / min_delay_in_register that we can tolerate. */ double max_delay_dev_ratio; /* Maximum ratio of increase in delay / stddev */ int do_auth; /* Flag indicating whether we authenticate packets we send to this machine (if it's serving us or the association is symmetric). Note : we don't authenticate if we can't find the key in our database. */ unsigned long auth_key_id; /* The ID of the authentication key to use. */ /* Count of how many packets we have transmitted since last successful receive from this peer */ int tx_count; /* Timestamp in tx field of last received packet. We have to reproduce this exactly as the orig field or our outgoing packet. */ NTP_int64 remote_orig; /* Local timestamp when the last packet was received from the source. We have to be prepared to tinker with this if the local clock has its frequency adjusted before we repond. The value we store here is what our own local time was when the same arrived. Before replying, we have to correct this to fit with the parameters for the current reference. (It must be stored relative to local time to permit frequency and offset adjustments to be made when we trim the local clock). */ struct timeval local_rx; /* Local timestamp when we last transmitted a packet to the source. We store two versions. The first is in NTP format, and is used to validate the next received packet from the source. Additionally, this is corrected to bring it into line with the current reference. The second is in timeval format, and is kept relative to the local clock. We modify this in accordance with local clock frequency/offset changes, and use this for computing statistics about the source when a return packet arrives. */ NTP_int64 local_ntp_tx; struct timeval local_tx; /* The instance record in the main source management module. This performs the statistical analysis on the samples we generate */ SRC_Instance source; int burst_good_samples_to_go; int burst_total_samples_to_go; }; /* ================================================== */ /* Initial delay period before first packet is transmitted (in seconds) */ #define INITIAL_DELAY 0.2 /* Spacing required between samples for any two servers/peers (to minimise risk of network collisions) (in seconds) */ #define SAMPLING_SEPARATION 0.2 /* Randomness added to spacing between samples for one server/peer */ #define SAMPLING_RANDOMNESS 0.02 /* Spacing between samples in burst mode for one server/peer */ #define BURST_INTERVAL 2.0 /* Time to wait before retransmitting in burst mode, if we did not get a reply to the previous probe */ #define BURST_TIMEOUT 8.0 /* Time to wait after sending echo to 'warm up' link */ #define WARM_UP_DELAY 4.0 /* The NTP protocol version that we support */ #define NTP_VERSION 3 /* Maximum allowed dispersion - as defined in RFC1305 (16 seconds) */ #define NTP_MAX_DISPERSION 16.0 /* Maximum allowed age of a reference to be supplied to a client (1 day) */ #define NTP_MAXAGE 86400 /* Maximum allowed stratum */ #define NTP_MAX_STRATUM 15 /* INVALID or Unkown stratum from external server as per the NTP 4 docs */ #define NTP_INVALID_STRATUM 0 /* ================================================== */ static ADF_AuthTable access_auth_table; static int md5_offset_usecs; /* ================================================== */ /* Forward prototypes */ static void transmit_timeout(void *arg); static void determine_md5_delay(void); /* ================================================== */ void NCR_Initialise(void) { logfileid = CNF_GetLogMeasurements() ? LOG_FileOpen("measurements", " Date (UTC) Time IP Address L St 1234 abc 5678 LP RP Score Offset Peer del. Peer disp. Root del. Root disp.") : -1; access_auth_table = ADF_CreateTable(); determine_md5_delay(); } /* ================================================== */ void NCR_Finalise(void) { ADF_DestroyTable(access_auth_table); } /* ================================================== */ static void start_initial_timeout(NCR_Instance inst) { /* Start timer for first transmission */ inst->timeout_id = SCH_AddTimeoutInClass(INITIAL_DELAY, SAMPLING_SEPARATION, SAMPLING_RANDOMNESS, SCH_NtpSamplingClass, transmit_timeout, (void *)inst); inst->timer_running = 1; return; } /* ================================================== */ NCR_Instance NCR_GetInstance(NTP_Remote_Address *remote_addr, NTP_Source_Type type, SourceParameters *params) { NCR_Instance result; result = MallocNew(struct NCR_Instance_Record); result->remote_addr = *remote_addr; switch (type) { case NTP_SERVER: result->mode = MODE_CLIENT; break; case NTP_PEER: result->mode = MODE_ACTIVE; break; default: assert(0); } result->minpoll = params->minpoll; result->maxpoll = params->maxpoll; result->min_stratum = params->min_stratum; result->presend_minpoll = params->presend_minpoll; result->presend_done = 0; if (params->authkey == INACTIVE_AUTHKEY) { result->do_auth = 0; result->auth_key_id = 0UL; } else { result->do_auth = 1; result->auth_key_id = params->authkey; } result->max_delay = params->max_delay; result->max_delay_ratio = params->max_delay_ratio; result->max_delay_dev_ratio = params->max_delay_dev_ratio; result->tx_count = 0; result->remote_orig.hi = 0; result->remote_orig.lo = 0; result->poll_target = params->poll_target; result->poll_score = 0.0; if (params->online) { start_initial_timeout(result); result->opmode = MD_ONLINE; } else { result->timer_running = 0; result->timeout_id = 0; result->opmode = MD_OFFLINE; } if (params->iburst) { NCR_InitiateSampleBurst(result, 4, 8); } result->auto_offline = params->auto_offline; result->local_poll = params->minpoll; /* Create a source instance for this NTP source */ result->source = SRC_CreateNewInstance(UTI_IPToRefid(&remote_addr->ip_addr), SRC_NTP, params->sel_option, &result->remote_addr.ip_addr); result->local_rx.tv_sec = 0; result->local_rx.tv_usec = 0; result->local_tx.tv_sec = 0; result->local_tx.tv_usec = 0; result->local_ntp_tx.hi = 0; result->local_ntp_tx.lo = 0; return result; } /* ================================================== */ /* Destroy an instance */ void NCR_DestroyInstance(NCR_Instance instance) { /* This will destroy the source instance inside the structure, which will cause reselection if this was the synchronising source etc. */ SRC_DestroyInstance(instance->source); /* Cancel any pending timeouts */ if (instance->timer_running) { SCH_RemoveTimeout(instance->timeout_id); instance->timer_running = 0; } /* Free the data structure */ Free(instance); return; } /* ================================================== */ /* ================================================== */ static int generate_packet_auth(NTP_Packet *pkt, unsigned long keyid) { int keylen; char *keytext; int keyok; MD5_CTX ctx; keyok = KEY_GetKey(keyid, &keytext, &keylen); if (keyok) { pkt->auth_keyid = htonl(keyid); MD5Init(&ctx); MD5Update(&ctx, (unsigned char *) keytext, keylen); MD5Update(&ctx, (unsigned char *) pkt, offsetof(NTP_Packet, auth_keyid)); MD5Final(&ctx); memcpy(&(pkt->auth_data), &ctx.digest, 16); return 1; } else { pkt->auth_keyid = htonl(0); return 0; } } /* ================================================== */ static void determine_md5_delay(void) { NTP_Packet pkt; struct timeval before, after; unsigned long usecs, min_usecs=0; MD5_CTX ctx; static const char *example_key = "#a0,243asd=-b ds"; int slen; int i; slen = strlen(example_key); for (i=0; i<10; i++) { LCL_ReadRawTime(&before); MD5Init(&ctx); MD5Update(&ctx, (unsigned const char *) example_key, slen); MD5Update(&ctx, (unsigned const char *) &pkt, offsetof(NTP_Packet, auth_keyid)); MD5Final(&ctx); LCL_ReadRawTime(&after); usecs = (after.tv_sec - before.tv_sec) * 1000000 + (after.tv_usec - before.tv_usec); if (i == 0) { min_usecs = usecs; } else { if (usecs < min_usecs) { min_usecs = usecs; } } } #ifdef TRACEON LOG(LOGS_INFO, LOGF_NtpCore, "MD5 took %d useconds", min_usecs); #endif /* Add on a bit extra to allow for copying, conversions etc */ md5_offset_usecs = min_usecs + (min_usecs >> 4); } /* ================================================== */ static int check_packet_auth(NTP_Packet *pkt, unsigned long keyid) { int keylen; char *keytext; int keyok; MD5_CTX ctx; keyok = KEY_GetKey(keyid, &keytext, &keylen); if (keyok) { pkt->auth_keyid = htonl(keyid); MD5Init(&ctx); MD5Update(&ctx, (unsigned char *) keytext, keylen); MD5Update(&ctx, (unsigned char *) pkt, offsetof(NTP_Packet, auth_keyid)); MD5Final(&ctx); if (!memcmp((void *) &ctx.digest, (void *) &(pkt->auth_data), 16)) { return 1; } else { return 0; } } else { return 0; } } /* ================================================== */ static void adjust_poll(NCR_Instance inst, double adj) { inst->poll_score += adj; if (inst->poll_score >= 1.0) { inst->local_poll += (int)inst->poll_score; inst->poll_score -= (int)inst->poll_score; } if (inst->poll_score < 0.0) { inst->local_poll += (int)(inst->poll_score - 1.0); inst->poll_score -= (int)(inst->poll_score - 1.0); } /* Clamp polling interval to defined range */ if (inst->local_poll < inst->minpoll) { inst->local_poll = inst->minpoll; inst->poll_score = 0; } else if (inst->local_poll > inst->maxpoll) { inst->local_poll = inst->maxpoll; inst->poll_score = 1.0; } } /* ================================================== */ static void transmit_packet(NTP_Mode my_mode, /* The mode this machine wants to be */ int my_poll, /* The log2 of the local poll interval */ int do_auth, /* Boolean indicating whether to authenticate the packet or not */ unsigned long key_id, /* The authentication key ID */ NTP_int64 *orig_ts, /* Originate timestamp (from received packet) */ struct timeval *local_rx, /* Local time request packet was received */ struct timeval *local_tx, /* RESULT : Time this reply is sent as local time, or NULL if don't want to know */ NTP_int64 *local_ntp_tx, /* RESULT : Time reply sent as NTP timestamp (including adjustment to reference), ignored if NULL */ NTP_Remote_Address *where_to /* Where to address the reponse to */ ) { NTP_Packet message; int version; int leap; struct timeval local_transmit; /* Parameters read from reference module */ int are_we_synchronised, our_stratum; NTP_Leap leap_status; unsigned long our_ref_id; struct timeval our_ref_time; double our_root_delay, our_root_dispersion; version = 3; LCL_ReadCookedTime(&local_transmit, NULL); REF_GetReferenceParams(&local_transmit, &are_we_synchronised, &leap_status, &our_stratum, &our_ref_id, &our_ref_time, &our_root_delay, &our_root_dispersion); if (are_we_synchronised) { leap = (int) leap_status; } else { leap = 3; } /* Generate transmit packet */ message.lvm = ((leap << 6) &0xc0) | ((version << 3) & 0x38) | (my_mode & 0x07); if (our_stratum <= NTP_MAX_STRATUM) { message.stratum = our_stratum; } else { /* (WGU) to handle NTP "Invalid" stratum as per the NTP V4 documents. */ message.stratum = NTP_INVALID_STRATUM; } message.poll = my_poll; message.precision = LCL_GetSysPrecisionAsLog(); /* If we're sending a client mode packet and we aren't synchronized yet, we might have to set up artificial values for some of these parameters */ message.root_delay = double_to_int32(our_root_delay); message.root_dispersion = double_to_int32(our_root_dispersion); message.reference_id = htonl((NTP_int32) our_ref_id); /* Now fill in timestamps */ UTI_TimevalToInt64(&our_ref_time, &message.reference_ts); /* Originate - this comes from the last packet the source sent us */ message.originate_ts = *orig_ts; /* Receive - this is when we received the last packet from the source. This timestamp will have been adjusted so that it will now look to the source like we have been running on our latest estimate of frequency all along */ UTI_TimevalToInt64(local_rx, &message.receive_ts); /* Transmit - this our local time right now! Also, we might need to store this for our own use later, next time we receive a message from the source we're sending to now. */ LCL_ReadCookedTime(&local_transmit, NULL); /* Authenticate */ if (do_auth) { /* Pre-compensate the transmit time by approx. how long it will take to generate the MD5 authentication bytes. */ local_transmit.tv_usec += md5_offset_usecs; UTI_NormaliseTimeval(&local_transmit); UTI_TimevalToInt64(&local_transmit, &message.transmit_ts); generate_packet_auth(&message, key_id); NIO_SendAuthenticatedPacket(&message, where_to); } else { UTI_TimevalToInt64(&local_transmit, &message.transmit_ts); NIO_SendNormalPacket(&message, where_to); } if (local_tx) { *local_tx = local_transmit; } if (local_ntp_tx) { *local_ntp_tx = message.transmit_ts; } } /* ================================================== */ /* Timeout handler for transmitting to a source. */ static void transmit_timeout(void *arg) { NCR_Instance inst = (NCR_Instance) arg; double timeout_delay=0.0; int do_timer = 0; int do_auth; #ifdef TRACEON LOG(LOGS_INFO, LOGF_NtpCore, "Transmit timeout for [%s:%d]", UTI_IPToString(&inst->remote_addr.ip_addr), inst->remote_addr.port); #endif /* Check whether we need to 'warm up' the link to the other end by sending an echo exchange to ensure both ends' ARP caches are primed. On loaded systems this might also help ensure that bits of the program are paged in properly before we start. */ if ((inst->presend_minpoll > 0) && (inst->presend_minpoll <= inst->local_poll) && !inst->presend_done) { /* Send */ NIO_SendEcho(&inst->remote_addr); inst->presend_done = 1; /* Requeue timeout */ inst->timer_running = 1; inst->timeout_id = SCH_AddTimeoutInClass(WARM_UP_DELAY, SAMPLING_SEPARATION, SAMPLING_RANDOMNESS, SCH_NtpSamplingClass, transmit_timeout, (void *)inst); return; } inst->presend_done = 0; /* Reset for next time */ ++inst->tx_count; /* If the source loses connectivity, back off the sampling rate to reduce wasted sampling. If it's the source to which we are currently locked, back off slower. */ if (inst->tx_count >= 2) { /* Implies we have missed at least one transmission */ adjust_poll(inst, SRC_IsSyncPeer(inst->source) ? 0.1 : 0.25); SRC_UpdateReachability(inst->source, 0); if (inst->auto_offline && inst->tx_count >= 3) { NCR_TakeSourceOffline(inst); } } if (inst->do_auth && KEY_KeyKnown(inst->auth_key_id)) { do_auth = 1; } else { do_auth = 0; } if (inst->opmode != MD_OFFLINE) { transmit_packet(inst->mode, inst->local_poll, do_auth, inst->auth_key_id, &inst->remote_orig, &inst->local_rx, &inst->local_tx, &inst->local_ntp_tx, &inst->remote_addr); } switch (inst->opmode) { case MD_BURST_WAS_OFFLINE: --inst->burst_total_samples_to_go; if (inst->burst_total_samples_to_go <= 0) { inst->opmode = MD_OFFLINE; } break; case MD_BURST_WAS_ONLINE: --inst->burst_total_samples_to_go; if (inst->burst_total_samples_to_go <= 0) { inst->opmode = MD_ONLINE; } break; default: break; } /* Restart timer for this message */ switch (inst->opmode) { case MD_ONLINE: timeout_delay = (double)(1 << inst->local_poll); do_timer = 1; break; case MD_OFFLINE: do_timer = 0; /* Mark source unreachable */ SRC_ResetReachability(inst->source); break; case MD_BURST_WAS_ONLINE: case MD_BURST_WAS_OFFLINE: timeout_delay = BURST_TIMEOUT; do_timer = 1; break; } if (do_timer) { inst->timer_running = 1; inst->timeout_id = SCH_AddTimeoutInClass(timeout_delay, SAMPLING_SEPARATION, SAMPLING_RANDOMNESS, SCH_NtpSamplingClass, transmit_timeout, (void *)inst); } else { inst->timer_running = 0; } /* And we're done */ return; } /* ================================================== */ static void receive_packet(NTP_Packet *message, struct timeval *now, double now_err, NCR_Instance inst, int do_auth) { int pkt_leap; int source_is_synchronized; double pkt_root_delay; double pkt_root_dispersion; unsigned long auth_key_id; /* The local time to which the (offset, delay, dispersion) triple will be taken to relate. For client/server operation this is practically the same as either the transmit or receive time. The difference comes in symmetric active mode, when the receive may come minutes after the transmit, and this time will be midway between the two */ struct timeval sample_time; /* The estimated offset (nomenclature from RFC1305 section 3.4.4). In seconds, a positive value indicates that the local clock is SLOW of the remote source and a negative value indicates that the local clock is FAST of the remote source. */ double theta; /* The estimated round delay in seconds */ double delta; /* The estimated peer dispersion in seconds */ double epsilon; /* The estimated peer distance in seconds */ double peer_distance; /* The total root delay */ double root_delay; /* The total root dispersion */ double root_dispersion; /* The skew relative to the remote source */ double skew; /* The estimated skew relative to the remote source. */ double source_freq_lo, source_freq_hi; /* These are the timeval equivalents of the remote epochs */ struct timeval remote_receive_tv, remote_transmit_tv; struct timeval remote_reference_tv; struct timeval local_average, remote_average; double local_interval, remote_interval; int test1, test2, test3, test4, test5, test6, test7, test7i, test7ii, test8; int test4a, test4b, test4c; /* In the words of section 3.4.4 of RFC1305, valid_data means that the NTP protocol association with the peer/server is properly synchronised. valid_header means that the measurement obtained from the packet is suitable for use in synchronising our local clock. Wierd choice of terminology. */ int valid_data, valid_header; int good_data, good_header; /* Kiss-of-Death packets */ int kod_rate = 0; int valid_kod; /* Variables used for doing logging */ static char sync_stats[4] = {'N', '+', '-', '?'}; /* The estimated offset predicted from previous samples. The convention here is that positive means local clock FAST of reference, i.e. backwards to the way that 'theta' is defined. */ double estimated_offset; /* The absolute difference between the offset estimate and measurement in seconds */ double error_in_estimate; int poll_to_use; double delay_time = 0; int requeue_transmit = 0; double poll_adj; /* ==================== */ /* Save local receive timestamp */ inst->local_rx = *now; pkt_leap = (message->lvm >> 6) & 0x3; if (pkt_leap == 0x3) { source_is_synchronized = 0; } else { source_is_synchronized = 1; } pkt_root_delay = int32_to_double(message->root_delay); pkt_root_dispersion = int32_to_double(message->root_dispersion); /* Perform packet validity tests */ /* Test 1 requires that pkt.xmt != peer.org. This protects against receiving a duplicate packet */ if ((message->transmit_ts.hi == inst->remote_orig.hi) && (message->transmit_ts.lo == inst->remote_orig.lo)) { test1 = 0; /* Failed */ } else { test1 = 1; /* Success */ } /* Test 2 requires pkt.org == peer.xmt. This ensures the source is responding to the latest packet we sent to it. */ if ((message->originate_ts.hi != inst->local_ntp_tx.hi) || (message->originate_ts.lo != inst->local_ntp_tx.lo)) { test2 = 0; /* Failed */ } else { test2 = 1; /* Success */ } /* Regardless of any validity checks we apply, we are required to save these two fields from the packet into the ntp source instance record. See RFC1305 section 3.4.4, peer.org <- pkt.xmt & peer.peerpoll <- pkt.poll. Note we can't do this assignment before test1 has been carried out!! */ inst->remote_orig = message->transmit_ts; inst->remote_poll = message->poll; /* Test 3 requires that pkt.org != 0 and pkt.rec != 0. If either of these are true it means the association is not properly 'up'. */ if (((message->originate_ts.hi == 0) && (message->originate_ts.lo == 0)) || ((message->receive_ts.hi == 0) && (message->receive_ts.lo == 0))) { test3 = 0; /* Failed */ } else { test3 = 1; /* Success */ } SRC_GetFrequencyRange(inst->source, &source_freq_lo, &source_freq_hi); UTI_Int64ToTimeval(&message->receive_ts, &remote_receive_tv); UTI_Int64ToTimeval(&message->transmit_ts, &remote_transmit_tv); if (test3) { UTI_AverageDiffTimevals(&remote_receive_tv, &remote_transmit_tv, &remote_average, &remote_interval); UTI_AverageDiffTimevals(&inst->local_tx, now, &local_average, &local_interval); /* In our case, we work out 'delta' as the worst case delay, assuming worst case frequency error between us and the other source */ delta = local_interval - remote_interval / (1.0 - source_freq_lo); /* Calculate theta. Following the NTP definition, this is negative if we are fast of the remote source. */ theta = (double) (remote_average.tv_sec - local_average.tv_sec) + (double) (remote_average.tv_usec - local_average.tv_usec) * 1.0e-6; /* We treat the time of the sample as being midway through the local measurement period. An analysis assuming constant relative frequency and zero network delay shows this is the only possible choice to estimate the frequency difference correctly for every sample pair. */ sample_time = local_average; /* Calculate skew */ skew = source_freq_hi - source_freq_lo; /* and then calculate peer dispersion */ epsilon = LCL_GetSysPrecisionAsQuantum() + now_err + skew * local_interval; } else { /* If test3 failed, we probably can't calculate these quantities properly (e.g. for the first sample received in a peering connection). */ theta = delta = epsilon = 0.0; } peer_distance = epsilon + 0.5 * fabs(delta); /* Test 4 requires that the round trip delay to the source and the source (RFC1305 'peer') dispersion are less than a cutoff value */ if ((fabs(delta) >= NTP_MAX_DISPERSION) || (epsilon >= NTP_MAX_DISPERSION)) { test4 = 0; /* Failed */ } else { test4 = 1; /* Success */ } /* Test 4a (additional to RFC1305) requires that the round trip delay is less than an administrator-defined value */ if (fabs(delta) > inst->max_delay) { test4a = 0; /* Failed */ } else { test4a = 1; /* Success */ } /* Test 4b (additional to RFC1305) requires that the ratio of the round trip delay to the minimum one currently in the stats data register is less than an administrator-defined value */ if (fabs(delta/SRC_MinRoundTripDelay(inst->source)) > inst->max_delay_ratio) { test4b = 0; /* Failed */ } else { test4b = 1; /* Success */ } /* Test 4c (additional to RFC1305) requires that the ratio of the increase in delay from the minimum one in the stats data register to the standard deviation of the offsets in the register is less than an administrator-defined value or the difference between measured offset and predicted offset is larger than the increase in delay */ if (!SRC_IsGoodSample(inst->source, -theta, delta, inst->max_delay_dev_ratio, LCL_GetMaxClockError(), &sample_time)) { test4c = 0; /* Failed */ } else { test4c = 1; /* Success */ } /* Test 5 relates to authentication. */ if (inst->do_auth) { if (do_auth) { auth_key_id = ntohl(message->auth_keyid); if (!KEY_KeyKnown(auth_key_id)) { test5 = 0; } else { test5 = check_packet_auth(message, auth_key_id); } } else { /* If we expect authenticated info from this peer/server and the packet doesn't have it, it's got to fail */ test5 = 0; } } else { /* If the peer or server sends us an authenticated frame, but we're not bothered about whether he authenticates or not, just ignore the test. */ test5 = 1; } /* Test 6 checks that (i) the remote clock is synchronised (ii) the transmit timestamp is not before the time it was synchronized (clearly bogus if it is), and (iii) that it was not synchronised too long ago */ UTI_Int64ToTimeval(&message->reference_ts, &remote_reference_tv); if ((!source_is_synchronized) || (UTI_CompareTimevals(&remote_reference_tv, &remote_transmit_tv) == 1) || ((remote_reference_tv.tv_sec + NTP_MAXAGE - remote_transmit_tv.tv_sec) < 0)) { test6 = 0; /* Failed */ } else { test6 = 1; /* Succeeded */ } /* (WGU) Set stratum to greater than any valid if incoming is 0 */ /* as per the NPT v4 documentation*/ if (message->stratum <= NTP_INVALID_STRATUM) { message->stratum = NTP_MAX_STRATUM + 1; } /* Increase stratum to the configured minimum */ if (message->stratum < inst->min_stratum) { message->stratum = inst->min_stratum; } /* Test 7i checks that the stratum in the packet is valid */ if (message->stratum > NTP_MAX_STRATUM) { test7i = 0; /* Failed */ } else { test7i = 1; } /* Test 7ii checks that the stratum in the packet is not higher than ours */ if (message->stratum > REF_GetOurStratum()) { test7ii = 0; /* Failed */ } else { test7ii = 1; } test7 = test7i && test7ii; /* Test 8 checks that the root delay and dispersion quoted in the packet are appropriate */ if ((fabs(pkt_root_delay) >= NTP_MAX_DISPERSION) || (pkt_root_dispersion >= NTP_MAX_DISPERSION)) { test8 = 0; /* Failed */ } else { test8 = 1; } /* Check for Kiss-of-Death */ if (message->stratum > NTP_MAX_STRATUM && !source_is_synchronized) { if (!memcmp(&message->reference_id, "RATE", 4)) kod_rate = 1; } valid_kod = test1 && test2 && test5; valid_data = test1 && test2 && test3 && test4 && test4a && test4b; good_data = valid_data && test4c; valid_header = test5 && test6 && test7i && test8; good_header = valid_header && test7ii; root_delay = pkt_root_delay + delta; root_dispersion = pkt_root_dispersion + epsilon; #ifdef TRACEON LOG(LOGS_INFO, LOGF_NtpCore, "lvm=%o stratum=%d poll=%d prec=%d", message->lvm, message->stratum, message->poll, message->precision); LOG(LOGS_INFO, LOGF_NtpCore, "Root delay=%08lx (%f), dispersion=%08lx (%f)", message->root_delay, pkt_root_delay, message->root_dispersion, pkt_root_dispersion); LOG(LOGS_INFO, LOGF_NtpCore, "Ref id=[%lx], ref_time=%08lx.%08lx [%s]", ntohl(message->reference_id), message->reference_ts.hi, message->reference_ts.lo, UTI_TimestampToString(&message->reference_ts)); LOG(LOGS_INFO, LOGF_NtpCore, "Originate=%08lx.%08lx [%s]", message->originate_ts.hi, message->originate_ts.lo, UTI_TimestampToString(&message->originate_ts)); LOG(LOGS_INFO, LOGF_NtpCore, "Message receive=%08lx.%08lx [%s]", message->receive_ts.hi, message->receive_ts.lo, UTI_TimestampToString(&message->receive_ts)); LOG(LOGS_INFO, LOGF_NtpCore, "Transmit=%08lx.%08lx [%s]", message->transmit_ts.hi, message->transmit_ts.lo, UTI_TimestampToString(&message->transmit_ts)); LOG(LOGS_INFO, LOGF_NtpCore, "theta=%f delta=%f epsilon=%f root_delay=%f root_dispersion=%f", theta, delta, epsilon, root_delay, root_dispersion); LOG(LOGS_INFO, LOGF_NtpCore, "test1=%d test2=%d test3=%d test4=%d valid_data=%d good_data=%d", test1, test2, test3, test4, valid_data, good_data); LOG(LOGS_INFO, LOGF_NtpCore, "test5=%d test6=%d test7=%d test8=%d valid_header=%d good_header=%d", test5, test6, test7, test8, valid_header, good_header); LOG(LOGS_INFO, LOGF_NtpCore, "kod_rate=%d valid_kod=%d", kod_rate, valid_kod); #endif if (valid_header && valid_data) { inst->tx_count = 0; SRC_UpdateReachability(inst->source, 1); /* Mark the source as suitable for synchronisation when both header and data are good, unmark when header is not good (i.e. the stratum is higher than ours) */ if (good_header) { if (good_data) { SRC_SetSelectable(inst->source); } } else { SRC_UnsetSelectable(inst->source); } } /* Do this before we accumulate a new sample into the stats registers, obviously */ estimated_offset = SRC_PredictOffset(inst->source, &sample_time); if (valid_header && good_data) { SRC_AccumulateSample(inst->source, &sample_time, theta, delta, epsilon, root_delay, root_dispersion, message->stratum, (NTP_Leap) pkt_leap); /* Now examine the registers. First though, if the prediction is not even within +/- the peer distance of the peer, we are clearly not tracking the peer at all well, so we back off the sampling rate depending on just how bad the situation is. */ error_in_estimate = fabs(-theta - estimated_offset); /* Now update the polling interval */ if (error_in_estimate > peer_distance) { int shift = 0; unsigned long temp = (int)(error_in_estimate / peer_distance); do { shift++; temp>>=1; } while (temp); poll_adj = -shift - inst->poll_score + 0.5; } else { int samples = SRC_Samples(inst->source); /* Adjust polling interval so that the number of sourcestats samples remains close to the target value */ poll_adj = ((double)samples / inst->poll_target - 1.0) / inst->poll_target; /* Use higher gain when decreasing the interval */ if (samples < inst->poll_target) { poll_adj *= 2.0; } } adjust_poll(inst, poll_adj); } else if (valid_header && valid_data) { /* Slowly increase the polling interval if we can't get good_data */ adjust_poll(inst, 0.1); } /* Reduce polling rate if KoD RATE was received */ if (kod_rate && valid_kod) { if (inst->remote_poll > inst->minpoll) { inst->minpoll = inst->remote_poll; if (inst->minpoll > inst->maxpoll) inst->maxpoll = inst->minpoll; if (inst->minpoll > inst->local_poll) inst->local_poll = inst->minpoll; LOG(LOGS_WARN, LOGF_NtpCore, "Received KoD RATE from %s, minpoll set to %d", UTI_IPToString(&inst->remote_addr.ip_addr), inst->minpoll); } /* Stop ongoing burst */ if (inst->opmode == MD_BURST_WAS_OFFLINE || inst->opmode == MD_BURST_WAS_ONLINE) { inst->burst_good_samples_to_go = 0; LOG(LOGS_WARN, LOGF_NtpCore, "Received KoD RATE from %s, burst sampling stopped", UTI_IPToString(&inst->remote_addr.ip_addr), inst->minpoll); } } /* If we're in burst mode, check whether the burst is completed and revert to the previous mode */ switch (inst->opmode) { case MD_BURST_WAS_ONLINE: if (valid_data) { --inst->burst_good_samples_to_go; } if (inst->burst_good_samples_to_go <= 0) { inst->opmode = MD_ONLINE; } break; case MD_BURST_WAS_OFFLINE: if (valid_data) { --inst->burst_good_samples_to_go; } if (inst->burst_good_samples_to_go <= 0) { inst->opmode = MD_OFFLINE; if (inst->timer_running) { SCH_RemoveTimeout(inst->timeout_id); } inst->timer_running = 0; } break; default: break; } /* And now, requeue the timer. If we're in burst mode, queue for immediate dispatch. If we're operating in client/server mode, queue the timeout for the poll interval hence. The fact that a timeout has been queued in the transmit handler is immaterial - that is only done so that we at least send something, if no reply is heard. If we're in symmetric mode, we have to take account of the peer's wishes, otherwise his sampling regime will fall to pieces. If we're in client/server mode, we don't care what poll interval the server responded with last time. */ switch (inst->opmode) { case MD_OFFLINE: requeue_transmit = 0; /* Mark source unreachable */ SRC_ResetReachability(inst->source); break; /* Even if we've received something, we don't want to transmit back. This might be a symmetric active peer that is trying to talk to us. */ case MD_ONLINE: /* Normal processing, depending on whether we're in client/server or symmetric mode */ requeue_transmit = 1; switch(inst->mode) { case MODE_CLIENT: /* Client/server association - aim at some randomised time approx the poll interval away */ poll_to_use = inst->local_poll; delay_time = (double) (1UL<local_poll < inst->remote_poll) ? inst->local_poll : inst->remote_poll; /* Limit by min and max poll */ if (poll_to_use < inst->minpoll) poll_to_use = inst->minpoll; if (poll_to_use > inst->maxpoll) poll_to_use = inst->maxpoll; delay_time = (double) (1UL<<(poll_to_use - 1)); break; default: assert(0); break; } break; case MD_BURST_WAS_ONLINE: case MD_BURST_WAS_OFFLINE: requeue_transmit = 1; delay_time = BURST_INTERVAL; break; default: assert(0); break; } if (kod_rate && valid_kod) { /* Back off for a while */ delay_time += (double) (4 * (1UL << inst->minpoll)); } if (requeue_transmit) { /* Get rid of old timeout and start a new one */ SCH_RemoveTimeout(inst->timeout_id); inst->timeout_id = SCH_AddTimeoutInClass(delay_time, SAMPLING_SEPARATION, SAMPLING_RANDOMNESS, SCH_NtpSamplingClass, transmit_timeout, (void *)inst); } /* Do measurement logging */ if (logfileid != -1) { LOG_FileWrite(logfileid, "%s %-15s %1c %2d %1d%1d%1d%1d %1d%1d%1d %1d%1d%1d%1d %2d %2d %4.2f %10.3e %10.3e %10.3e %10.3e %10.3e", UTI_TimeToLogForm(sample_time.tv_sec), UTI_IPToString(&inst->remote_addr.ip_addr), sync_stats[pkt_leap], message->stratum, test1, test2, test3, test4, test4a, test4b, test4c, test5, test6, test7, test8, inst->local_poll, inst->remote_poll, inst->poll_score, theta, delta, epsilon, pkt_root_delay, pkt_root_dispersion); } /* At this point we will have to do something about trimming the poll interval for the source and requeueing the polling timeout. Left until the source statistics management has been written */ return; } /* ================================================== */ /* From RFC1305, the standard handling of receive packets, depending on the mode of the packet and of the source, is : Source mode>>> Packet mode active passive client server bcast vvv active recv pkt recv xmit xmit passive recv error recv error error client xmit xmit error xmit xmit server recv error recv error error bcast recv error recv error error We ignore broadcasts in this implementation - they create too many problems. */ /* ================================================== */ static void process_known (NTP_Packet *message, /* the received message */ struct timeval *now, /* timestamp at time of receipt */ double now_err, NCR_Instance inst, /* the instance record for this peer/server */ int do_auth /* whether the received packet allegedly contains authentication info*/ ) { int pkt_mode; int version; int valid_auth, valid_key; int authenticate_reply; unsigned long auth_key_id; unsigned long reply_auth_key_id; /* Check version */ version = (message->lvm >> 3) & 0x7; if (version != NTP_VERSION) { /* Ignore packet, but might want to log it */ return; } /* Perform tests mentioned in RFC1305 to validate packet contents */ pkt_mode = (message->lvm >> 0) & 0x7; /* Now, depending on the mode we decide what to do */ switch (pkt_mode) { case MODE_CLIENT: /* If message is client mode, we just respond with a server mode packet, regardless of what we think the remote machine is supposed to be. However, even though this is a configured peer or server, we still implement access restrictions on client mode operation. This is an extension to RFC1305, as we don't bother to check whether we are a client of the remote machine. This copes with the case for an isolated network where one machine is set by eye and is used as the master, with the other machines pointed at it. If the master goes down, we want to be able to reset its time at startup by relying on one of the secondaries to flywheel it. The behaviour coded here is required in the secondaries to make this possible. */ if (ADF_IsAllowed(access_auth_table, &inst->remote_addr.ip_addr)) { CLG_LogNTPClientAccess(&inst->remote_addr.ip_addr, (time_t) now->tv_sec); if (do_auth) { auth_key_id = ntohl(message->auth_keyid); valid_key = KEY_KeyKnown(auth_key_id); if (valid_key) { valid_auth = check_packet_auth(message, auth_key_id); } else { valid_auth = 0; } if (valid_key && valid_auth) { authenticate_reply = 1; reply_auth_key_id = auth_key_id; } else { authenticate_reply = 0; reply_auth_key_id = 0UL; } } else { authenticate_reply = 0; reply_auth_key_id = 0UL; } transmit_packet(MODE_SERVER, inst->local_poll, authenticate_reply, reply_auth_key_id, &message->transmit_ts, now, &inst->local_tx, &inst->local_ntp_tx, &inst->remote_addr); } else if (!LOG_RateLimited()) { LOG(LOGS_WARN, LOGF_NtpCore, "NTP packet received from unauthorised host %s port %d", UTI_IPToString(&inst->remote_addr.ip_addr), inst->remote_addr.port); } break; case MODE_ACTIVE: switch(inst->mode) { case MODE_ACTIVE: /* Ordinary symmetric peering */ CLG_LogNTPPeerAccess(&inst->remote_addr.ip_addr, (time_t) now->tv_sec); receive_packet(message, now, now_err, inst, do_auth); break; case MODE_PASSIVE: /* In this software this case should not arise, we don't support unconfigured peers */ break; case MODE_CLIENT: /* This is where we have the remote configured as a server and he has us configured as a peer - fair enough. */ CLG_LogNTPPeerAccess(&inst->remote_addr.ip_addr, (time_t) now->tv_sec); receive_packet(message, now, now_err, inst, do_auth); break; case MODE_SERVER: /* Nonsense - we can't have a preconfigured server */ break; case MODE_BROADCAST: /* We don't handle broadcasts */ break; default: /* Obviously ignore */ break; } break; case MODE_SERVER: switch(inst->mode) { case MODE_ACTIVE: /* Slightly bizarre combination, but we can still process it */ CLG_LogNTPPeerAccess(&inst->remote_addr.ip_addr, (time_t) now->tv_sec); receive_packet(message, now, now_err, inst, do_auth); break; case MODE_PASSIVE: /* We have no passive peers in this software */ break; case MODE_CLIENT: /* Standard case where he's a server and we're the client */ receive_packet(message, now, now_err, inst, do_auth); break; case MODE_SERVER: /* RFC1305 error condition. */ break; case MODE_BROADCAST: /* RFC1305 error condition */ break; default: /* Obviously ignore */ break; } break; case MODE_PASSIVE: switch(inst->mode) { case MODE_ACTIVE: /* This would arise if we have the remote configured as a peer and he does not have us configured */ CLG_LogNTPPeerAccess(&inst->remote_addr.ip_addr, (time_t) now->tv_sec); receive_packet(message, now, now_err, inst, do_auth); break; case MODE_PASSIVE: /* Error condition in RFC1305. Also, we can't have any non-transient PASSIVE sources in this version, we only allow configured peers! */ break; case MODE_CLIENT: /* This is a wierd combination - how could it arise? */ receive_packet(message, now, now_err, inst, do_auth); break; case MODE_SERVER: /* Error condition in RFC1305 */ break; case MODE_BROADCAST: /* Error condition in RFC1305 */ break; default: /* Obviously ignore */ break; } break; case MODE_BROADCAST: /* Just ignore these, but might want to log them */ break; default: /* Obviously ignore */ break; } } /* ================================================== */ /* This routine is called when a new packet arrives off the network, and it relates to a source we have an ongoing protocol exchange with */ void NCR_ProcessNoauthKnown(NTP_Packet *message, struct timeval *now, double now_err, NCR_Instance inst) { process_known(message, now, now_err, inst, 0); } /* ================================================== */ /* This routine is called when a new packet arrives off the network, and we do not recognize its source */ void NCR_ProcessNoauthUnknown(NTP_Packet *message, struct timeval *now, double now_err, NTP_Remote_Address *remote_addr) { NTP_Mode his_mode; NTP_Mode my_mode; int my_poll; if (ADF_IsAllowed(access_auth_table, &remote_addr->ip_addr)) { his_mode = message->lvm & 0x07; if (his_mode == MODE_CLIENT) { /* We are server */ my_mode = MODE_SERVER; CLG_LogNTPClientAccess(&remote_addr->ip_addr, (time_t) now->tv_sec); } else if (his_mode == MODE_ACTIVE) { /* We are symmetric passive, even though we don't ever lock to him */ my_mode = MODE_PASSIVE; CLG_LogNTPPeerAccess(&remote_addr->ip_addr, (time_t) now->tv_sec); } else { my_mode = MODE_UNDEFINED; } /* If we can't determine a sensible mode to reply with, it means he has supplied a wierd mode in his request, so ignore it. */ if (my_mode != MODE_UNDEFINED) { my_poll = message->poll; /* What should this be set to? Does the client actually care? */ transmit_packet(my_mode, my_poll, 0, 0UL, &message->transmit_ts, /* Originate (for us) is the transmit time for the client */ now, /* Time we received the packet */ NULL, /* Don't care when we send reply, we aren't maintaining state about this client */ NULL, /* Ditto */ remote_addr); } } else if (!LOG_RateLimited()) { LOG(LOGS_WARN, LOGF_NtpCore, "NTP packet received from unauthorised host %s port %d", UTI_IPToString(&remote_addr->ip_addr), remote_addr->port); } return; } /* ================================================== */ /* This routine is called when a new authenticated packet arrives off the network, and it relates to a source we have an ongoing protocol exchange with */ void NCR_ProcessAuthKnown(NTP_Packet *message, struct timeval *now, double now_err, NCR_Instance data) { process_known(message, now, now_err, data, 1); } /* ================================================== */ /* This routine is called when a new authenticated packet arrives off the network, and we do not recognize its source */ void NCR_ProcessAuthUnknown(NTP_Packet *message, struct timeval *now, double now_err, NTP_Remote_Address *remote_addr) { NTP_Mode his_mode; NTP_Mode my_mode; int my_poll; int valid_key, valid_auth; unsigned long key_id; if (ADF_IsAllowed(access_auth_table, &remote_addr->ip_addr)) { his_mode = message->lvm & 0x07; if (his_mode == MODE_CLIENT) { /* We are server */ my_mode = MODE_SERVER; CLG_LogNTPClientAccess(&remote_addr->ip_addr, (time_t) now->tv_sec); } else if (his_mode == MODE_ACTIVE) { /* We are symmetric passive, even though we don't ever lock to him */ my_mode = MODE_PASSIVE; CLG_LogNTPPeerAccess(&remote_addr->ip_addr, (time_t) now->tv_sec); } else { my_mode = MODE_UNDEFINED; } /* If we can't determine a sensible mode to reply with, it means he has supplied a wierd mode in his request, so ignore it. */ if (my_mode != MODE_UNDEFINED) { /* Only reply if we know the key and the packet authenticates properly. */ key_id = ntohl(message->auth_keyid); valid_key = KEY_KeyKnown(key_id); if (valid_key) { valid_auth = check_packet_auth(message, key_id); } else { valid_auth = 0; } if (valid_key && valid_auth) { my_poll = message->poll; /* What should this be set to? Does the client actually care? */ transmit_packet(my_mode, my_poll, 1, key_id, &message->transmit_ts, /* Originate (for us) is the transmit time for the client */ now, /* Time we received the packet */ NULL, /* Don't care when we send reply, we aren't maintaining state about this client */ NULL, /* Ditto */ remote_addr); } } } return; } /* ================================================== */ void NCR_SlewTimes(NCR_Instance inst, struct timeval *when, double dfreq, double doffset) { struct timeval prev; double delta; prev = inst->local_rx; UTI_AdjustTimeval(&inst->local_rx, when, &inst->local_rx, &delta, dfreq, doffset); #ifdef TRACEON LOG(LOGS_INFO, LOGF_NtpCore, "rx prev=[%s] new=[%s]", UTI_TimevalToString(&prev), UTI_TimevalToString(&inst->local_rx)); #endif prev = inst->local_tx; UTI_AdjustTimeval(&inst->local_tx, when, &inst->local_tx, &delta, dfreq, doffset); #ifdef TRACEON LOG(LOGS_INFO, LOGF_NtpCore, "tx prev=[%s] new=[%s]", UTI_TimevalToString(&prev), UTI_TimevalToString(&inst->local_tx)); #endif } /* ================================================== */ void NCR_TakeSourceOnline(NCR_Instance inst) { switch (inst->opmode) { case MD_ONLINE: /* Nothing to do */ break; case MD_OFFLINE: if (!inst->timer_running) { /* We are not already actively polling it */ LOG(LOGS_INFO, LOGF_NtpCore, "Source %s online", UTI_IPToString(&inst->remote_addr.ip_addr)); inst->tx_count = 0; inst->local_poll = inst->minpoll; inst->poll_score = 0.5; inst->opmode = MD_ONLINE; start_initial_timeout(inst); } break; case MD_BURST_WAS_ONLINE: /* Will revert */ break; case MD_BURST_WAS_OFFLINE: inst->opmode = MD_BURST_WAS_ONLINE; break; } } /* ================================================== */ void NCR_TakeSourceOffline(NCR_Instance inst) { switch (inst->opmode) { case MD_ONLINE: if (inst->timer_running) { LOG(LOGS_INFO, LOGF_NtpCore, "Source %s offline", UTI_IPToString(&inst->remote_addr.ip_addr)); SCH_RemoveTimeout(inst->timeout_id); inst->timer_running = 0; inst->opmode = MD_OFFLINE; /* Mark source unreachable */ SRC_ResetReachability(inst->source); } break; case MD_OFFLINE: break; case MD_BURST_WAS_ONLINE: inst->opmode = MD_BURST_WAS_OFFLINE; break; case MD_BURST_WAS_OFFLINE: break; } } /* ================================================== */ void NCR_ModifyMinpoll(NCR_Instance inst, int new_minpoll) { inst->minpoll = new_minpoll; LOG(LOGS_INFO, LOGF_NtpCore, "Source %s new minpoll %d", UTI_IPToString(&inst->remote_addr.ip_addr), new_minpoll); } /* ================================================== */ void NCR_ModifyMaxpoll(NCR_Instance inst, int new_maxpoll) { inst->maxpoll = new_maxpoll; LOG(LOGS_INFO, LOGF_NtpCore, "Source %s new maxpoll %d", UTI_IPToString(&inst->remote_addr.ip_addr), new_maxpoll); } /* ================================================== */ void NCR_ModifyMaxdelay(NCR_Instance inst, double new_max_delay) { inst->max_delay = new_max_delay; LOG(LOGS_INFO, LOGF_NtpCore, "Source %s new max delay %f", UTI_IPToString(&inst->remote_addr.ip_addr), new_max_delay); } /* ================================================== */ void NCR_ModifyMaxdelayratio(NCR_Instance inst, double new_max_delay_ratio) { inst->max_delay_ratio = new_max_delay_ratio; LOG(LOGS_INFO, LOGF_NtpCore, "Source %s new max delay ratio %f", UTI_IPToString(&inst->remote_addr.ip_addr), new_max_delay_ratio); } /* ================================================== */ void NCR_ModifyMaxdelaydevratio(NCR_Instance inst, double new_max_delay_dev_ratio) { inst->max_delay_dev_ratio = new_max_delay_dev_ratio; LOG(LOGS_INFO, LOGF_NtpCore, "Source %s new max delay dev ratio %f", UTI_IPToString(&inst->remote_addr.ip_addr), new_max_delay_dev_ratio); } /* ================================================== */ void NCR_ModifyMinstratum(NCR_Instance inst, int new_min_stratum) { inst->min_stratum = new_min_stratum; LOG(LOGS_INFO, LOGF_NtpCore, "Source %s new minstratum %d", UTI_IPToString(&inst->remote_addr.ip_addr), new_min_stratum); } /* ================================================== */ void NCR_ModifyPolltarget(NCR_Instance inst, int new_poll_target) { inst->poll_target = new_poll_target; LOG(LOGS_INFO, LOGF_NtpCore, "Source %s new polltarget %d", UTI_IPToString(&inst->remote_addr.ip_addr), new_poll_target); } /* ================================================== */ void NCR_InitiateSampleBurst(NCR_Instance inst, int n_good_samples, int n_total_samples) { if (inst->mode == MODE_CLIENT) { /* We want to prevent burst mode being used on symmetric active associations - it will play havoc with the peer's sampling strategy. (This obviously relies on us having the peer configured that way if he has us configured symmetric active - but there's not much else we can do.) */ switch (inst->opmode) { case MD_BURST_WAS_OFFLINE: case MD_BURST_WAS_ONLINE: /* If already burst sampling, don't start again */ break; case MD_ONLINE: inst->opmode = MD_BURST_WAS_ONLINE; inst->burst_good_samples_to_go = n_good_samples; inst->burst_total_samples_to_go = n_total_samples; if (inst->timer_running) { SCH_RemoveTimeout(inst->timeout_id); } inst->timer_running = 1; inst->timeout_id = SCH_AddTimeoutInClass(0.0, SAMPLING_SEPARATION, SAMPLING_RANDOMNESS, SCH_NtpSamplingClass, transmit_timeout, (void *) inst); break; case MD_OFFLINE: inst->opmode = MD_BURST_WAS_OFFLINE; inst->burst_good_samples_to_go = n_good_samples; inst->burst_total_samples_to_go = n_total_samples; if (inst->timer_running) { SCH_RemoveTimeout(inst->timeout_id); } inst->timer_running = 1; inst->timeout_id = SCH_AddTimeoutInClass(0.0, SAMPLING_SEPARATION, SAMPLING_RANDOMNESS, SCH_NtpSamplingClass, transmit_timeout, (void *) inst); break; default: assert(0); break; } } } /* ================================================== */ void NCR_ReportSource(NCR_Instance inst, RPT_SourceReport *report, struct timeval *now) { report->poll = inst->local_poll; switch (inst->mode) { case MODE_CLIENT: report->mode = RPT_NTP_CLIENT; break; case MODE_ACTIVE: report->mode = RPT_NTP_PEER; break; default: assert(0); } return; } /* ================================================== */ int NCR_AddAccessRestriction(IPAddr *ip_addr, int subnet_bits, int allow, int all) { ADF_Status status; if (allow) { if (all) { status = ADF_AllowAll(access_auth_table, ip_addr, subnet_bits); } else { status = ADF_Allow(access_auth_table, ip_addr, subnet_bits); } } else { if (all) { status = ADF_DenyAll(access_auth_table, ip_addr, subnet_bits); } else { status = ADF_Deny(access_auth_table, ip_addr, subnet_bits); } } if (status == ADF_BADSUBNET) { return 0; } else if (status == ADF_SUCCESS) { return 1; } else { return 0; } } /* ================================================== */ int NCR_CheckAccessRestriction(IPAddr *ip_addr) { return ADF_IsAllowed(access_auth_table, ip_addr); } /* ================================================== */ void NCR_IncrementActivityCounters(NCR_Instance inst, int *online, int *offline, int *burst_online, int *burst_offline) { switch (inst->opmode) { case MD_BURST_WAS_OFFLINE: ++*burst_offline; break; case MD_BURST_WAS_ONLINE: ++*burst_online; break; case MD_ONLINE: ++*online; break; case MD_OFFLINE: ++*offline; break; default: assert(0); break; } } /* ================================================== */ NTP_Remote_Address * NCR_GetRemoteAddress(NCR_Instance inst) { return &inst->remote_addr; } /* ================================================== */ int NCR_IsSyncPeer(NCR_Instance inst) { return SRC_IsSyncPeer(inst->source); } /* ================================================== */