#define GIC_DIST_BASE	0x81001000
#define GIC_CPUI_BASE	0x81002000

#define TIMER_HYP_PPI			10
#define TIMER_VIRT_PPI			11
#define TIMER_PHYS_SECURE_PPI		13
#define TIMER_PHYS_NONSECURE_PPI	14

#define PMU_CORE0_SPI			9
#define PMU_CORE1_SPI			10
#define PMU_CORE2_SPI			11
#define PMU_CORE3_SPI			12
#define HS_SPIM_SPI			36
#define SDIO_EMMC_SPI			85
#define SPU_GMAC_SPI			90
#define EMMC_DDR_1_8V

#include "../bcm_b53_template.dtsi"
#include "../bcm_rsvdmem_64.dtsi"

/ {   
	aliases {
		spi1 = &hsspi; /* 0 = legacy, 1 = high speed */
	};

	/* this is actually the PLL but we have no clock framework */
	hsspi_pll: hsspi-pll {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <400000000>;
	};

	/* Legacy UBUS base */
	ubus@ff800000 {
		nand@ff801800 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "brcm,nand-bcm63xx", "brcm,brcmnand-v7.1";
			reg = <0x0 0x1800 0x0 0x600>, <0x0 0x2000 0x0 0x10>;
			reg-names = "nand", "nand-int-base";
			status = "okay";

			nandcs@0 {
				compatible = "brcm,nandcs";
				reg = <0>;
				nand-on-flash-bbt;
			};

		};

		watchdog@ff800428 {
			compatible = "brcm,bcm96xxx-wdt";
			reg = <0x0 0x428 0x0 0x10>;
			timeout-sec = <80>;
		};

		i2c@0xff802100 {
			compatible = "brcm,bcm63000-i2c";
			reg = <0x0 0x2100 0x0 0x60>;
			clk_sel = <5>;
		};

		hsspi: spi@0xff801000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "brcm,bcm6328-hsspi";
			reg = <0x0 0x1000 0x0 0x600>;
			clocks = <&hsspi_pll>, <&hsspi_pll>;
			clock-names = "hsspi", "pll";
			spi-max-frequency = <100000000>;
			num-cs = <8>;
			cs-gpios = <0>, <0>;
			interrupts = <GIC_SPI HS_SPIM_SPI IRQ_TYPE_LEVEL_HIGH>;
			status = "okay";
		 };
	};

	pdc0: spu-pdc@0x8001c000 {
		compatible = "brcm,pdc";
		reg = <0x00000000 0x8001c000 0x00000000 0x448>;
		interrupts = <GIC_SPI SPU_GMAC_SPI IRQ_TYPE_LEVEL_HIGH>;
		brcm,num_chan = <1>;
	};

	spu-crypto@0x8001d000 {
		compatible = "brcm,spu-crypto";
		reg = <0x00000000 0x8001d000 0x00000000 0x64>;
		brcm,num_spu = <1>;
	};
	
	therm0: brcm-therm {
		compatible = "brcm,therm";
	};

#if defined(CONFIG_BCM_PCIE_HCD)
	pcie0: pcie@80040000 {
		compatible = "brcm,bcm963xx-pcie";
		device_type = "pci";
		reg = <0 0x80040000 0 0x0000A000>;

		#address-cells = <3>;
		#size-cells = <2>;
		ranges = <0x02000000 0 0xC0000000 0 0xC0000000 0 0x10000000>;

		interrupt-names = "intr";
		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;   /* core error log interrupts */

		#interrupt-cells = <1>;
		interrupt-map-mask = <0 0 0 0>;
		interrupt-map = <0 0 0 0 &gic GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;

		brcm,coreid = <0>;
	};

	pcie1: pcie@80050000 {
		compatible = "brcm,bcm963xx-pcie";
		device_type = "pci";
		reg = <0 0x80050000 0 0x0000A000>;

		#address-cells = <3>;
		#size-cells = <2>;
		ranges = <0x02000000 0 0xD0000000 0 0xD0000000 0 0x10000000>;

		interrupt-names = "intr";
		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;   /* core error log interrupts */

		#interrupt-cells = <1>;
		interrupt-map-mask = <0 0 0 0>;
		interrupt-map = <0 0 0 0 &gic GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;

		brcm,coreid = <1>;
	};

	pcie2: pcie@80060000 {
		compatible = "brcm,bcm963xx-pcie";
		device_type = "pci";
		reg = <0 0x80060000 0 0x0000A000>;

		#address-cells = <3>;
		#size-cells = <2>;
		ranges = <0x02000000 0 0xE0000000 0 0xE0000000 0 0x10000000>;

		interrupt-names = "intr";
		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;   /* core error log interrupts */

		#interrupt-cells = <1>;
		interrupt-map-mask = <0 0 0 0>;
		interrupt-map = <0 0 0 0 &gic GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;

		brcm,coreid = <2>;
	};
#endif

};