/* * * arch/xtensa/platform/xtavnet/setup.c * * ... * * Authors: Chris Zankel * Joe Taylor * * Copyright 2001 - 2006 Tensilica Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include void platform_halt(void) { lcd_disp_at_pos(" HALT ", 0); local_irq_disable(); while (1) cpu_relax(); } void platform_power_off(void) { lcd_disp_at_pos("POWEROFF", 0); local_irq_disable(); while (1) cpu_relax(); } void platform_restart(void) { /* Flush and reset the mmu, simulate a processor reset, and * jump to the reset vector. */ __asm__ __volatile__ ("movi a2, 15\n\t" "wsr a2, icountlevel\n\t" "movi a2, 0\n\t" "wsr a2, icount\n\t" #if XCHAL_NUM_IBREAK > 0 "wsr a2, ibreakenable\n\t" #endif "wsr a2, lcount\n\t" "movi a2, 0x1f\n\t" "wsr a2, ps\n\t" "isync\n\t" "jx %0\n\t" : : "a" (XCHAL_RESET_VECTOR_VADDR) : "a2" ); /* control never gets here */ } void __init platform_setup(char **cmdline) { } #ifdef CONFIG_OF static void __init update_clock_frequency(struct device_node *node) { struct property *newfreq; u32 freq; if (!of_property_read_u32(node, "clock-frequency", &freq) && freq != 0) return; newfreq = kzalloc(sizeof(*newfreq) + sizeof(u32), GFP_KERNEL); if (!newfreq) return; newfreq->value = newfreq + 1; newfreq->length = sizeof(freq); newfreq->name = kstrdup("clock-frequency", GFP_KERNEL); if (!newfreq->name) { kfree(newfreq); return; } *(u32 *)newfreq->value = cpu_to_be32(*(u32 *)XTFPGA_CLKFRQ_VADDR); of_update_property(node, newfreq); } #define MAC_LEN 6 static void __init update_local_mac(struct device_node *node) { struct property *newmac; const u8* macaddr; int prop_len; macaddr = of_get_property(node, "local-mac-address", &prop_len); if (macaddr == NULL || prop_len != MAC_LEN) return; newmac = kzalloc(sizeof(*newmac) + MAC_LEN, GFP_KERNEL); if (newmac == NULL) return; newmac->value = newmac + 1; newmac->length = MAC_LEN; newmac->name = kstrdup("local-mac-address", GFP_KERNEL); if (newmac->name == NULL) { kfree(newmac); return; } memcpy(newmac->value, macaddr, MAC_LEN); ((u8*)newmac->value)[5] = (*(u32*)DIP_SWITCHES_VADDR) & 0x3f; of_update_property(node, newmac); } static int __init machine_setup(void) { struct device_node *clock; struct device_node *eth = NULL; for_each_node_by_name(clock, "main-oscillator") update_clock_frequency(clock); if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc"))) update_local_mac(eth); return 0; } arch_initcall(machine_setup); #endif /* early initialization */ void __init platform_init(bp_tag_t *first) { } /* Heartbeat. */ void platform_heartbeat(void) { } #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT void __init platform_calibrate_ccount(void) { long clk_freq = 0; #ifdef CONFIG_OF struct device_node *cpu = of_find_compatible_node(NULL, NULL, "cdns,xtensa-cpu"); if (cpu) { u32 freq; update_clock_frequency(cpu); if (!of_property_read_u32(cpu, "clock-frequency", &freq)) clk_freq = freq; } #endif if (!clk_freq) clk_freq = *(long *)XTFPGA_CLKFRQ_VADDR; ccount_freq = clk_freq; } #endif #ifndef CONFIG_OF #include #include #include #include /*---------------------------------------------------------------------------- * Ethernet -- OpenCores Ethernet MAC (ethoc driver) */ static struct resource ethoc_res[] = { [0] = { /* register space */ .start = OETH_REGS_PADDR, .end = OETH_REGS_PADDR + OETH_REGS_SIZE - 1, .flags = IORESOURCE_MEM, }, [1] = { /* buffer space */ .start = OETH_SRAMBUFF_PADDR, .end = OETH_SRAMBUFF_PADDR + OETH_SRAMBUFF_SIZE - 1, .flags = IORESOURCE_MEM, }, [2] = { /* IRQ number */ .start = XTENSA_PIC_LINUX_IRQ(OETH_IRQ), .end = XTENSA_PIC_LINUX_IRQ(OETH_IRQ), .flags = IORESOURCE_IRQ, }, }; static struct ethoc_platform_data ethoc_pdata = { /* * The MAC address for these boards is 00:50:c2:13:6f:xx. * The last byte (here as zero) is read from the DIP switches on the * board. */ .hwaddr = { 0x00, 0x50, 0xc2, 0x13, 0x6f, 0 }, .phy_id = -1, }; static struct platform_device ethoc_device = { .name = "ethoc", .id = -1, .num_resources = ARRAY_SIZE(ethoc_res), .resource = ethoc_res, .dev = { .platform_data = ðoc_pdata, }, }; /*---------------------------------------------------------------------------- * USB Host/Device -- Cypress CY7C67300 */ static struct resource c67x00_res[] = { [0] = { /* register space */ .start = C67X00_PADDR, .end = C67X00_PADDR + C67X00_SIZE - 1, .flags = IORESOURCE_MEM, }, [1] = { /* IRQ number */ .start = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ), .end = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ), .flags = IORESOURCE_IRQ, }, }; static struct c67x00_platform_data c67x00_pdata = { .sie_config = C67X00_SIE1_HOST | C67X00_SIE2_UNUSED, .hpi_regstep = 4, }; static struct platform_device c67x00_device = { .name = "c67x00", .id = -1, .num_resources = ARRAY_SIZE(c67x00_res), .resource = c67x00_res, .dev = { .platform_data = &c67x00_pdata, }, }; /*---------------------------------------------------------------------------- * UART */ static struct resource serial_resource = { .start = DUART16552_PADDR, .end = DUART16552_PADDR + 0x1f, .flags = IORESOURCE_MEM, }; static struct plat_serial8250_port serial_platform_data[] = { [0] = { .mapbase = DUART16552_PADDR, .irq = XTENSA_PIC_LINUX_IRQ(DUART16552_INTNUM), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM32, .regshift = 2, .uartclk = 0, /* set in xtavnet_init() */ }, { }, }; static struct platform_device xtavnet_uart = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, .num_resources = 1, .resource = &serial_resource, }; /* platform devices */ static struct platform_device *platform_devices[] __initdata = { ðoc_device, &c67x00_device, &xtavnet_uart, }; static int __init xtavnet_init(void) { /* Ethernet MAC address. */ ethoc_pdata.hwaddr[5] = *(u32 *)DIP_SWITCHES_VADDR; /* Clock rate varies among FPGA bitstreams; board specific FPGA register * reports the actual clock rate. */ serial_platform_data[0].uartclk = *(long *)XTFPGA_CLKFRQ_VADDR; /* register platform devices */ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); /* ETHOC driver is a bit quiet; at least display Ethernet MAC, so user * knows whether they set it correctly on the DIP switches. */ pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr); ethoc_pdata.eth_clkfreq = *(long *)XTFPGA_CLKFRQ_VADDR; return 0; } /* * Register to be done during do_initcalls(). */ arch_initcall(xtavnet_init); #endif /* CONFIG_OF */