/* * gspca ViCam subdriver * * Copyright (C) 2011 Hans de Goede * * Based on the usbvideo vicam driver, which is: * * Copyright (c) 2002 Joe Burks (jburks@wavicle.org), * Chris Cheney (chris.cheney@gmail.com), * Pavel Machek (pavel@ucw.cz), * John Tyner (jtyner@cs.ucr.edu), * Monroe Williams (monroe@pobox.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #define MODULE_NAME "vicam" #define HEADER_SIZE 64 #include #include #include #include #include "gspca.h" #define VICAM_FIRMWARE "vicam/firmware.fw" MODULE_AUTHOR("Hans de Goede "); MODULE_DESCRIPTION("GSPCA ViCam USB Camera Driver"); MODULE_LICENSE("GPL"); MODULE_FIRMWARE(VICAM_FIRMWARE); struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ struct work_struct work_struct; struct workqueue_struct *work_thread; }; /* The vicam sensor has a resolution of 512 x 244, with I believe square pixels, but this is forced to a 4:3 ratio by optics. So it has non square pixels :( */ static struct v4l2_pix_format vicam_mode[] = { { 256, 122, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, .bytesperline = 256, .sizeimage = 256 * 122, .colorspace = V4L2_COLORSPACE_SRGB,}, /* 2 modes with somewhat more square pixels */ { 256, 200, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, .bytesperline = 256, .sizeimage = 256 * 200, .colorspace = V4L2_COLORSPACE_SRGB,}, { 256, 240, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, .bytesperline = 256, .sizeimage = 256 * 240, .colorspace = V4L2_COLORSPACE_SRGB,}, #if 0 /* This mode has extremely non square pixels, testing use only */ { 512, 122, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, .bytesperline = 512, .sizeimage = 512 * 122, .colorspace = V4L2_COLORSPACE_SRGB,}, #endif { 512, 244, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, .bytesperline = 512, .sizeimage = 512 * 244, .colorspace = V4L2_COLORSPACE_SRGB,}, }; static int vicam_control_msg(struct gspca_dev *gspca_dev, u8 request, u16 value, u16 index, u8 *data, u16 len) { int ret; ret = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), request, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, len, 1000); if (ret < 0) pr_err("control msg req %02X error %d\n", request, ret); return ret; } static int vicam_set_camera_power(struct gspca_dev *gspca_dev, int state) { int ret; ret = vicam_control_msg(gspca_dev, 0x50, state, 0, NULL, 0); if (ret < 0) return ret; if (state) ret = vicam_control_msg(gspca_dev, 0x55, 1, 0, NULL, 0); return ret; } /* * request and read a block of data */ static int vicam_read_frame(struct gspca_dev *gspca_dev, u8 *data, int size) { int ret, unscaled_height, act_len = 0; u8 *req_data = gspca_dev->usb_buf; s32 expo = v4l2_ctrl_g_ctrl(gspca_dev->exposure); s32 gain = v4l2_ctrl_g_ctrl(gspca_dev->gain); memset(req_data, 0, 16); req_data[0] = gain; if (gspca_dev->pixfmt.width == 256) req_data[1] |= 0x01; /* low nibble x-scale */ if (gspca_dev->pixfmt.height <= 122) { req_data[1] |= 0x10; /* high nibble y-scale */ unscaled_height = gspca_dev->pixfmt.height * 2; } else unscaled_height = gspca_dev->pixfmt.height; req_data[2] = 0x90; /* unknown, does not seem to do anything */ if (unscaled_height <= 200) req_data[3] = 0x06; /* vend? */ else if (unscaled_height <= 242) /* Yes 242 not 240 */ req_data[3] = 0x07; /* vend? */ else /* Up to 244 lines with req_data[3] == 0x08 */ req_data[3] = 0x08; /* vend? */ if (expo < 256) { /* Frame rate maxed out, use partial frame expo time */ req_data[4] = 255 - expo; req_data[5] = 0x00; req_data[6] = 0x00; req_data[7] = 0x01; } else { /* Modify frame rate */ req_data[4] = 0x00; req_data[5] = 0x00; req_data[6] = expo & 0xFF; req_data[7] = expo >> 8; } req_data[8] = ((244 - unscaled_height) / 2) & ~0x01; /* vstart */ /* bytes 9-15 do not seem to affect exposure or image quality */ mutex_lock(&gspca_dev->usb_lock); ret = vicam_control_msg(gspca_dev, 0x51, 0x80, 0, req_data, 16); mutex_unlock(&gspca_dev->usb_lock); if (ret < 0) return ret; ret = usb_bulk_msg(gspca_dev->dev, usb_rcvbulkpipe(gspca_dev->dev, 0x81), data, size, &act_len, 10000); /* successful, it returns 0, otherwise negative */ if (ret < 0 || act_len != size) { pr_err("bulk read fail (%d) len %d/%d\n", ret, act_len, size); return -EIO; } return 0; } /* * This function is called as a workqueue function and runs whenever the camera * is streaming data. Because it is a workqueue function it is allowed to sleep * so we can use synchronous USB calls. To avoid possible collisions with other * threads attempting to use gspca_dev->usb_buf we take the usb_lock when * performing USB operations using it. In practice we don't really need this * as the cameras controls are only written from the workqueue. */ static void vicam_dostream(struct work_struct *work) { struct sd *sd = container_of(work, struct sd, work_struct); struct gspca_dev *gspca_dev = &sd->gspca_dev; int ret, frame_sz; u8 *buffer; frame_sz = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].sizeimage + HEADER_SIZE; buffer = kmalloc(frame_sz, GFP_KERNEL | GFP_DMA); if (!buffer) { pr_err("Couldn't allocate USB buffer\n"); goto exit; } while (gspca_dev->present && gspca_dev->streaming) { #ifdef CONFIG_PM if (gspca_dev->frozen) break; #endif ret = vicam_read_frame(gspca_dev, buffer, frame_sz); if (ret < 0) break; /* Note the frame header contents seem to be completely constant, they do not change with either image, or settings. So we simply discard it. The frames have a very similar 64 byte footer, which we don't even bother reading from the cam */ gspca_frame_add(gspca_dev, FIRST_PACKET, buffer + HEADER_SIZE, frame_sz - HEADER_SIZE); gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); } exit: kfree(buffer); } /* This function is called at probe time just before sd_init */ static int sd_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) { struct cam *cam = &gspca_dev->cam; struct sd *sd = (struct sd *)gspca_dev; /* We don't use the buffer gspca allocates so make it small. */ cam->bulk = 1; cam->bulk_size = 64; cam->cam_mode = vicam_mode; cam->nmodes = ARRAY_SIZE(vicam_mode); INIT_WORK(&sd->work_struct, vicam_dostream); return 0; } /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { int ret; const struct ihex_binrec *rec; const struct firmware *uninitialized_var(fw); u8 *firmware_buf; ret = request_ihex_firmware(&fw, VICAM_FIRMWARE, &gspca_dev->dev->dev); if (ret) { pr_err("Failed to load \"vicam/firmware.fw\": %d\n", ret); return ret; } firmware_buf = kmalloc(PAGE_SIZE, GFP_KERNEL); if (!firmware_buf) { ret = -ENOMEM; goto exit; } for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) { memcpy(firmware_buf, rec->data, be16_to_cpu(rec->len)); ret = vicam_control_msg(gspca_dev, 0xff, 0, 0, firmware_buf, be16_to_cpu(rec->len)); if (ret < 0) break; } kfree(firmware_buf); exit: release_firmware(fw); return ret; } /* Set up for getting frames. */ static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *)gspca_dev; int ret; ret = vicam_set_camera_power(gspca_dev, 1); if (ret < 0) return ret; /* Start the workqueue function to do the streaming */ sd->work_thread = create_singlethread_workqueue(MODULE_NAME); queue_work(sd->work_thread, &sd->work_struct); return 0; } /* called on streamoff with alt==0 and on disconnect */ /* the usb_lock is held at entry - restore on exit */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *dev = (struct sd *)gspca_dev; /* wait for the work queue to terminate */ mutex_unlock(&gspca_dev->usb_lock); /* This waits for vicam_dostream to finish */ destroy_workqueue(dev->work_thread); dev->work_thread = NULL; mutex_lock(&gspca_dev->usb_lock); if (gspca_dev->present) vicam_set_camera_power(gspca_dev, 0); } static int sd_init_controls(struct gspca_dev *gspca_dev) { struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; gspca_dev->vdev.ctrl_handler = hdl; v4l2_ctrl_handler_init(hdl, 2); gspca_dev->exposure = v4l2_ctrl_new_std(hdl, NULL, V4L2_CID_EXPOSURE, 0, 2047, 1, 256); gspca_dev->gain = v4l2_ctrl_new_std(hdl, NULL, V4L2_CID_GAIN, 0, 255, 1, 200); if (hdl->error) { pr_err("Could not initialize controls\n"); return hdl->error; } return 0; } /* Table of supported USB devices */ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x04c1, 0x009d)}, {USB_DEVICE(0x0602, 0x1001)}, {} }; MODULE_DEVICE_TABLE(usb, device_table); /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, .config = sd_config, .init = sd_init, .init_controls = sd_init_controls, .start = sd_start, .stop0 = sd_stop0, }; /* -- device connect -- */ static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), THIS_MODULE); } static struct usb_driver sd_driver = { .name = MODULE_NAME, .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, #ifdef CONFIG_PM .suspend = gspca_suspend, .resume = gspca_resume, .reset_resume = gspca_resume, #endif }; module_usb_driver(sd_driver);