/* * Copyright (C) 2003-2008 Takahiro Hirofuchi * * This is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, * USA. */ #include #include #include #include #include #include #include #include "usbip_common.h" #include "vhci.h" #define DRIVER_AUTHOR "Takahiro Hirofuchi" #define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver" /* * TODO * - update root hub emulation * - move the emulation code to userland ? * porting to other operating systems * minimize kernel code * - add suspend/resume code * - clean up everything */ /* See usb gadget dummy hcd */ static int vhci_hub_status(struct usb_hcd *hcd, char *buff); static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buff, u16 wLength); static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags); static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); static int vhci_start(struct usb_hcd *vhci_hcd); static void vhci_stop(struct usb_hcd *hcd); static int vhci_get_frame_number(struct usb_hcd *hcd); static const char driver_name[] = "vhci_hcd"; static const char driver_desc[] = "USB/IP Virtual Host Controller"; struct vhci_hcd *the_controller; static const char * const bit_desc[] = { "CONNECTION", /*0*/ "ENABLE", /*1*/ "SUSPEND", /*2*/ "OVER_CURRENT", /*3*/ "RESET", /*4*/ "R5", /*5*/ "R6", /*6*/ "R7", /*7*/ "POWER", /*8*/ "LOWSPEED", /*9*/ "HIGHSPEED", /*10*/ "PORT_TEST", /*11*/ "INDICATOR", /*12*/ "R13", /*13*/ "R14", /*14*/ "R15", /*15*/ "C_CONNECTION", /*16*/ "C_ENABLE", /*17*/ "C_SUSPEND", /*18*/ "C_OVER_CURRENT", /*19*/ "C_RESET", /*20*/ "R21", /*21*/ "R22", /*22*/ "R23", /*23*/ "R24", /*24*/ "R25", /*25*/ "R26", /*26*/ "R27", /*27*/ "R28", /*28*/ "R29", /*29*/ "R30", /*30*/ "R31", /*31*/ }; static void dump_port_status_diff(u32 prev_status, u32 new_status) { int i = 0; u32 bit = 1; pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status); while (bit) { u32 prev = prev_status & bit; u32 new = new_status & bit; char change; if (!prev && new) change = '+'; else if (prev && !new) change = '-'; else change = ' '; if (prev || new) pr_debug(" %c%s\n", change, bit_desc[i]); bit <<= 1; i++; } pr_debug("\n"); } void rh_port_connect(int rhport, enum usb_device_speed speed) { usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport); spin_lock(&the_controller->lock); the_controller->port_status[rhport] |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION); switch (speed) { case USB_SPEED_HIGH: the_controller->port_status[rhport] |= USB_PORT_STAT_HIGH_SPEED; break; case USB_SPEED_LOW: the_controller->port_status[rhport] |= USB_PORT_STAT_LOW_SPEED; break; default: break; } spin_unlock(&the_controller->lock); usb_hcd_poll_rh_status(vhci_to_hcd(the_controller)); } static void rh_port_disconnect(int rhport) { usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport); spin_lock(&the_controller->lock); the_controller->port_status[rhport] &= ~USB_PORT_STAT_CONNECTION; the_controller->port_status[rhport] |= (1 << USB_PORT_FEAT_C_CONNECTION); spin_unlock(&the_controller->lock); usb_hcd_poll_rh_status(vhci_to_hcd(the_controller)); } #define PORT_C_MASK \ ((USB_PORT_STAT_C_CONNECTION \ | USB_PORT_STAT_C_ENABLE \ | USB_PORT_STAT_C_SUSPEND \ | USB_PORT_STAT_C_OVERCURRENT \ | USB_PORT_STAT_C_RESET) << 16) /* * Returns 0 if the status hasn't changed, or the number of bytes in buf. * Ports are 0-indexed from the HCD point of view, * and 1-indexed from the USB core pointer of view. * * @buf: a bitmap to show which port status has been changed. * bit 0: reserved * bit 1: the status of port 0 has been changed. * bit 2: the status of port 1 has been changed. * ... */ static int vhci_hub_status(struct usb_hcd *hcd, char *buf) { struct vhci_hcd *vhci; int retval; int rhport; int changed = 0; retval = DIV_ROUND_UP(VHCI_NPORTS + 1, 8); memset(buf, 0, retval); vhci = hcd_to_vhci(hcd); spin_lock(&vhci->lock); if (!HCD_HW_ACCESSIBLE(hcd)) { usbip_dbg_vhci_rh("hw accessible flag not on?\n"); goto done; } /* check pseudo status register for each port */ for (rhport = 0; rhport < VHCI_NPORTS; rhport++) { if ((vhci->port_status[rhport] & PORT_C_MASK)) { /* The status of a port has been changed, */ usbip_dbg_vhci_rh("port %d status changed\n", rhport); buf[(rhport + 1) / 8] |= 1 << (rhport + 1) % 8; changed = 1; } } if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1)) usb_hcd_resume_root_hub(hcd); done: spin_unlock(&vhci->lock); return changed ? retval : 0; } static inline void hub_descriptor(struct usb_hub_descriptor *desc) { memset(desc, 0, sizeof(*desc)); desc->bDescriptorType = USB_DT_HUB; desc->bDescLength = 9; desc->wHubCharacteristics = __constant_cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); desc->bNbrPorts = VHCI_NPORTS; desc->u.hs.DeviceRemovable[0] = 0xff; desc->u.hs.DeviceRemovable[1] = 0xff; } static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { struct vhci_hcd *dum; int retval = 0; int rhport; u32 prev_port_status[VHCI_NPORTS]; if (!HCD_HW_ACCESSIBLE(hcd)) return -ETIMEDOUT; /* * NOTE: * wIndex shows the port number and begins from 1. */ usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue, wIndex); if (wIndex > VHCI_NPORTS) pr_err("invalid port number %d\n", wIndex); rhport = ((__u8)(wIndex & 0x00ff)) - 1; dum = hcd_to_vhci(hcd); spin_lock(&dum->lock); /* store old status and compare now and old later */ if (usbip_dbg_flag_vhci_rh) { memcpy(prev_port_status, dum->port_status, sizeof(prev_port_status)); } switch (typeReq) { case ClearHubFeature: usbip_dbg_vhci_rh(" ClearHubFeature\n"); break; case ClearPortFeature: switch (wValue) { case USB_PORT_FEAT_SUSPEND: if (dum->port_status[rhport] & USB_PORT_STAT_SUSPEND) { /* 20msec signaling */ dum->resuming = 1; dum->re_timeout = jiffies + msecs_to_jiffies(20); } break; case USB_PORT_FEAT_POWER: usbip_dbg_vhci_rh( " ClearPortFeature: USB_PORT_FEAT_POWER\n"); dum->port_status[rhport] = 0; dum->resuming = 0; break; case USB_PORT_FEAT_C_RESET: usbip_dbg_vhci_rh( " ClearPortFeature: USB_PORT_FEAT_C_RESET\n"); switch (dum->vdev[rhport].speed) { case USB_SPEED_HIGH: dum->port_status[rhport] |= USB_PORT_STAT_HIGH_SPEED; break; case USB_SPEED_LOW: dum->port_status[rhport] |= USB_PORT_STAT_LOW_SPEED; break; default: break; } default: usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n", wValue); dum->port_status[rhport] &= ~(1 << wValue); break; } break; case GetHubDescriptor: usbip_dbg_vhci_rh(" GetHubDescriptor\n"); hub_descriptor((struct usb_hub_descriptor *) buf); break; case GetHubStatus: usbip_dbg_vhci_rh(" GetHubStatus\n"); *(__le32 *) buf = cpu_to_le32(0); break; case GetPortStatus: usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex); if (wIndex > VHCI_NPORTS || wIndex < 1) { pr_err("invalid port number %d\n", wIndex); retval = -EPIPE; } /* we do not care about resume. */ /* whoever resets or resumes must GetPortStatus to * complete it!! */ if (dum->resuming && time_after(jiffies, dum->re_timeout)) { dum->port_status[rhport] |= (1 << USB_PORT_FEAT_C_SUSPEND); dum->port_status[rhport] &= ~(1 << USB_PORT_FEAT_SUSPEND); dum->resuming = 0; dum->re_timeout = 0; } if ((dum->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) != 0 && time_after(jiffies, dum->re_timeout)) { dum->port_status[rhport] |= (1 << USB_PORT_FEAT_C_RESET); dum->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET); dum->re_timeout = 0; if (dum->vdev[rhport].ud.status == VDEV_ST_NOTASSIGNED) { usbip_dbg_vhci_rh( " enable rhport %d (status %u)\n", rhport, dum->vdev[rhport].ud.status); dum->port_status[rhport] |= USB_PORT_STAT_ENABLE; } } ((__le16 *) buf)[0] = cpu_to_le16(dum->port_status[rhport]); ((__le16 *) buf)[1] = cpu_to_le16(dum->port_status[rhport] >> 16); usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0], ((u16 *)buf)[1]); break; case SetHubFeature: usbip_dbg_vhci_rh(" SetHubFeature\n"); retval = -EPIPE; break; case SetPortFeature: switch (wValue) { case USB_PORT_FEAT_SUSPEND: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_SUSPEND\n"); break; case USB_PORT_FEAT_RESET: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_RESET\n"); /* if it's already running, disconnect first */ if (dum->port_status[rhport] & USB_PORT_STAT_ENABLE) { dum->port_status[rhport] &= ~(USB_PORT_STAT_ENABLE | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); /* FIXME test that code path! */ } /* 50msec reset signaling */ dum->re_timeout = jiffies + msecs_to_jiffies(50); /* FALLTHROUGH */ default: usbip_dbg_vhci_rh(" SetPortFeature: default %d\n", wValue); dum->port_status[rhport] |= (1 << wValue); break; } break; default: pr_err("default: no such request\n"); /* "protocol stall" on error */ retval = -EPIPE; } if (usbip_dbg_flag_vhci_rh) { pr_debug("port %d\n", rhport); /* Only dump valid port status */ if (rhport >= 0) { dump_port_status_diff(prev_port_status[rhport], dum->port_status[rhport]); } } usbip_dbg_vhci_rh(" bye\n"); spin_unlock(&dum->lock); return retval; } static struct vhci_device *get_vdev(struct usb_device *udev) { int i; if (!udev) return NULL; for (i = 0; i < VHCI_NPORTS; i++) if (the_controller->vdev[i].udev == udev) return port_to_vdev(i); return NULL; } static void vhci_tx_urb(struct urb *urb) { struct vhci_device *vdev = get_vdev(urb->dev); struct vhci_priv *priv; if (!vdev) { pr_err("could not get virtual device"); return; } priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC); if (!priv) { usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); return; } spin_lock(&vdev->priv_lock); priv->seqnum = atomic_inc_return(&the_controller->seqnum); if (priv->seqnum == 0xffff) dev_info(&urb->dev->dev, "seqnum max\n"); priv->vdev = vdev; priv->urb = urb; urb->hcpriv = (void *) priv; list_add_tail(&priv->list, &vdev->priv_tx); wake_up(&vdev->waitq_tx); spin_unlock(&vdev->priv_lock); } static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) { struct device *dev = &urb->dev->dev; int ret = 0; struct vhci_device *vdev; /* patch to usb_sg_init() is in 2.5.60 */ BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length); spin_lock(&the_controller->lock); if (urb->status != -EINPROGRESS) { dev_err(dev, "URB already unlinked!, status %d\n", urb->status); spin_unlock(&the_controller->lock); return urb->status; } vdev = port_to_vdev(urb->dev->portnum-1); /* refuse enqueue for dead connection */ spin_lock(&vdev->ud.lock); if (vdev->ud.status == VDEV_ST_NULL || vdev->ud.status == VDEV_ST_ERROR) { dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport); spin_unlock(&vdev->ud.lock); spin_unlock(&the_controller->lock); return -ENODEV; } spin_unlock(&vdev->ud.lock); ret = usb_hcd_link_urb_to_ep(hcd, urb); if (ret) goto no_need_unlink; /* * The enumeration process is as follows; * * 1. Get_Descriptor request to DevAddrs(0) EndPoint(0) * to get max packet length of default pipe * * 2. Set_Address request to DevAddr(0) EndPoint(0) * */ if (usb_pipedevice(urb->pipe) == 0) { __u8 type = usb_pipetype(urb->pipe); struct usb_ctrlrequest *ctrlreq = (struct usb_ctrlrequest *) urb->setup_packet; if (type != PIPE_CONTROL || !ctrlreq) { dev_err(dev, "invalid request to devnum 0\n"); ret = -EINVAL; goto no_need_xmit; } switch (ctrlreq->bRequest) { case USB_REQ_SET_ADDRESS: /* set_address may come when a device is reset */ dev_info(dev, "SetAddress Request (%d) to port %d\n", ctrlreq->wValue, vdev->rhport); usb_put_dev(vdev->udev); vdev->udev = usb_get_dev(urb->dev); spin_lock(&vdev->ud.lock); vdev->ud.status = VDEV_ST_USED; spin_unlock(&vdev->ud.lock); if (urb->status == -EINPROGRESS) { /* This request is successfully completed. */ /* If not -EINPROGRESS, possibly unlinked. */ urb->status = 0; } goto no_need_xmit; case USB_REQ_GET_DESCRIPTOR: if (ctrlreq->wValue == cpu_to_le16(USB_DT_DEVICE << 8)) usbip_dbg_vhci_hc( "Not yet?:Get_Descriptor to device 0 (get max pipe size)\n"); usb_put_dev(vdev->udev); vdev->udev = usb_get_dev(urb->dev); goto out; default: /* NOT REACHED */ dev_err(dev, "invalid request to devnum 0 bRequest %u, wValue %u\n", ctrlreq->bRequest, ctrlreq->wValue); ret = -EINVAL; goto no_need_xmit; } } out: vhci_tx_urb(urb); spin_unlock(&the_controller->lock); return 0; no_need_xmit: usb_hcd_unlink_urb_from_ep(hcd, urb); no_need_unlink: spin_unlock(&the_controller->lock); usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); return ret; } /* * vhci_rx gives back the urb after receiving the reply of the urb. If an * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives * back its urb. For the driver unlinking the urb, the content of the urb is * not important, but the calling to its completion handler is important; the * completion of unlinking is notified by the completion handler. * * * CLIENT SIDE * * - When vhci_hcd receives RET_SUBMIT, * * - case 1a). the urb of the pdu is not unlinking. * - normal case * => just give back the urb * * - case 1b). the urb of the pdu is unlinking. * - usbip.ko will return a reply of the unlinking request. * => give back the urb now and go to case 2b). * * - When vhci_hcd receives RET_UNLINK, * * - case 2a). a submit request is still pending in vhci_hcd. * - urb was really pending in usbip.ko and urb_unlink_urb() was * completed there. * => free a pending submit request * => notify unlink completeness by giving back the urb * * - case 2b). a submit request is *not* pending in vhci_hcd. * - urb was already given back to the core driver. * => do not give back the urb * * * SERVER SIDE * * - When usbip receives CMD_UNLINK, * * - case 3a). the urb of the unlink request is now in submission. * => do usb_unlink_urb(). * => after the unlink is completed, send RET_UNLINK. * * - case 3b). the urb of the unlink request is not in submission. * - may be already completed or never be received * => send RET_UNLINK * */ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { struct vhci_priv *priv; struct vhci_device *vdev; spin_lock(&the_controller->lock); priv = urb->hcpriv; if (!priv) { /* URB was never linked! or will be soon given back by * vhci_rx. */ spin_unlock(&the_controller->lock); return 0; } { int ret = 0; ret = usb_hcd_check_unlink_urb(hcd, urb, status); if (ret) { spin_unlock(&the_controller->lock); return ret; } } /* send unlink request here? */ vdev = priv->vdev; if (!vdev->ud.tcp_socket) { /* tcp connection is closed */ spin_lock(&vdev->priv_lock); list_del(&priv->list); kfree(priv); urb->hcpriv = NULL; spin_unlock(&vdev->priv_lock); /* * If tcp connection is alive, we have sent CMD_UNLINK. * vhci_rx will receive RET_UNLINK and give back the URB. * Otherwise, we give back it here. */ usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock(&the_controller->lock); usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); spin_lock(&the_controller->lock); } else { /* tcp connection is alive */ struct vhci_unlink *unlink; spin_lock(&vdev->priv_lock); /* setup CMD_UNLINK pdu */ unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC); if (!unlink) { spin_unlock(&vdev->priv_lock); spin_unlock(&the_controller->lock); usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); return -ENOMEM; } unlink->seqnum = atomic_inc_return(&the_controller->seqnum); if (unlink->seqnum == 0xffff) pr_info("seqnum max\n"); unlink->unlink_seqnum = priv->seqnum; /* send cmd_unlink and try to cancel the pending URB in the * peer */ list_add_tail(&unlink->list, &vdev->unlink_tx); wake_up(&vdev->waitq_tx); spin_unlock(&vdev->priv_lock); } spin_unlock(&the_controller->lock); usbip_dbg_vhci_hc("leave\n"); return 0; } static void vhci_device_unlink_cleanup(struct vhci_device *vdev) { struct vhci_unlink *unlink, *tmp; spin_lock(&the_controller->lock); spin_lock(&vdev->priv_lock); list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) { pr_info("unlink cleanup tx %lu\n", unlink->unlink_seqnum); list_del(&unlink->list); kfree(unlink); } while (!list_empty(&vdev->unlink_rx)) { struct urb *urb; unlink = list_first_entry(&vdev->unlink_rx, struct vhci_unlink, list); /* give back URB of unanswered unlink request */ pr_info("unlink cleanup rx %lu\n", unlink->unlink_seqnum); urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum); if (!urb) { pr_info("the urb (seqnum %lu) was already given back\n", unlink->unlink_seqnum); list_del(&unlink->list); kfree(unlink); continue; } urb->status = -ENODEV; usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); list_del(&unlink->list); spin_unlock(&vdev->priv_lock); spin_unlock(&the_controller->lock); usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); spin_lock(&the_controller->lock); spin_lock(&vdev->priv_lock); kfree(unlink); } spin_unlock(&vdev->priv_lock); spin_unlock(&the_controller->lock); } /* * The important thing is that only one context begins cleanup. * This is why error handling and cleanup become simple. * We do not want to consider race condition as possible. */ static void vhci_shutdown_connection(struct usbip_device *ud) { struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); /* need this? see stub_dev.c */ if (ud->tcp_socket) { pr_debug("shutdown sockfd %d\n", ud->sockfd); kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); } /* kill threads related to this sdev */ if (vdev->ud.tcp_rx) { kthread_stop_put(vdev->ud.tcp_rx); vdev->ud.tcp_rx = NULL; } if (vdev->ud.tcp_tx) { kthread_stop_put(vdev->ud.tcp_tx); vdev->ud.tcp_tx = NULL; } pr_info("stop threads\n"); /* active connection is closed */ if (vdev->ud.tcp_socket) { sockfd_put(vdev->ud.tcp_socket); vdev->ud.tcp_socket = NULL; vdev->ud.sockfd = -1; } pr_info("release socket\n"); vhci_device_unlink_cleanup(vdev); /* * rh_port_disconnect() is a trigger of ... * usb_disable_device(): * disable all the endpoints for a USB device. * usb_disable_endpoint(): * disable endpoints. pending urbs are unlinked(dequeued). * * NOTE: After calling rh_port_disconnect(), the USB device drivers of a * detached device should release used urbs in a cleanup function (i.e. * xxx_disconnect()). Therefore, vhci_hcd does not need to release * pushed urbs and their private data in this function. * * NOTE: vhci_dequeue() must be considered carefully. When shutting down * a connection, vhci_shutdown_connection() expects vhci_dequeue() * gives back pushed urbs and frees their private data by request of * the cleanup function of a USB driver. When unlinking a urb with an * active connection, vhci_dequeue() does not give back the urb which * is actually given back by vhci_rx after receiving its return pdu. * */ rh_port_disconnect(vdev->rhport); pr_info("disconnect device\n"); } static void vhci_device_reset(struct usbip_device *ud) { struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); spin_lock(&ud->lock); vdev->speed = 0; vdev->devid = 0; usb_put_dev(vdev->udev); vdev->udev = NULL; if (ud->tcp_socket) { sockfd_put(ud->tcp_socket); ud->tcp_socket = NULL; ud->sockfd = -1; } ud->status = VDEV_ST_NULL; spin_unlock(&ud->lock); } static void vhci_device_unusable(struct usbip_device *ud) { spin_lock(&ud->lock); ud->status = VDEV_ST_ERROR; spin_unlock(&ud->lock); } static void vhci_device_init(struct vhci_device *vdev) { memset(vdev, 0, sizeof(*vdev)); vdev->ud.side = USBIP_VHCI; vdev->ud.status = VDEV_ST_NULL; spin_lock_init(&vdev->ud.lock); INIT_LIST_HEAD(&vdev->priv_rx); INIT_LIST_HEAD(&vdev->priv_tx); INIT_LIST_HEAD(&vdev->unlink_tx); INIT_LIST_HEAD(&vdev->unlink_rx); spin_lock_init(&vdev->priv_lock); init_waitqueue_head(&vdev->waitq_tx); vdev->ud.eh_ops.shutdown = vhci_shutdown_connection; vdev->ud.eh_ops.reset = vhci_device_reset; vdev->ud.eh_ops.unusable = vhci_device_unusable; usbip_start_eh(&vdev->ud); } static int vhci_start(struct usb_hcd *hcd) { struct vhci_hcd *vhci = hcd_to_vhci(hcd); int rhport; int err = 0; usbip_dbg_vhci_hc("enter vhci_start\n"); /* initialize private data of usb_hcd */ for (rhport = 0; rhport < VHCI_NPORTS; rhport++) { struct vhci_device *vdev = &vhci->vdev[rhport]; vhci_device_init(vdev); vdev->rhport = rhport; } atomic_set(&vhci->seqnum, 0); spin_lock_init(&vhci->lock); hcd->power_budget = 0; /* no limit */ hcd->uses_new_polling = 1; /* vhci_hcd is now ready to be controlled through sysfs */ err = sysfs_create_group(&vhci_dev(vhci)->kobj, &dev_attr_group); if (err) { pr_err("create sysfs files\n"); return err; } return 0; } static void vhci_stop(struct usb_hcd *hcd) { struct vhci_hcd *vhci = hcd_to_vhci(hcd); int rhport = 0; usbip_dbg_vhci_hc("stop VHCI controller\n"); /* 1. remove the userland interface of vhci_hcd */ sysfs_remove_group(&vhci_dev(vhci)->kobj, &dev_attr_group); /* 2. shutdown all the ports of vhci_hcd */ for (rhport = 0; rhport < VHCI_NPORTS; rhport++) { struct vhci_device *vdev = &vhci->vdev[rhport]; usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED); usbip_stop_eh(&vdev->ud); } } static int vhci_get_frame_number(struct usb_hcd *hcd) { pr_err("Not yet implemented\n"); return 0; } #ifdef CONFIG_PM /* FIXME: suspend/resume */ static int vhci_bus_suspend(struct usb_hcd *hcd) { struct vhci_hcd *vhci = hcd_to_vhci(hcd); dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); spin_lock(&vhci->lock); hcd->state = HC_STATE_SUSPENDED; spin_unlock(&vhci->lock); return 0; } static int vhci_bus_resume(struct usb_hcd *hcd) { struct vhci_hcd *vhci = hcd_to_vhci(hcd); int rc = 0; dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); spin_lock(&vhci->lock); if (!HCD_HW_ACCESSIBLE(hcd)) rc = -ESHUTDOWN; else hcd->state = HC_STATE_RUNNING; spin_unlock(&vhci->lock); return rc; } #else #define vhci_bus_suspend NULL #define vhci_bus_resume NULL #endif static struct hc_driver vhci_hc_driver = { .description = driver_name, .product_desc = driver_desc, .hcd_priv_size = sizeof(struct vhci_hcd), .flags = HCD_USB2, .start = vhci_start, .stop = vhci_stop, .urb_enqueue = vhci_urb_enqueue, .urb_dequeue = vhci_urb_dequeue, .get_frame_number = vhci_get_frame_number, .hub_status_data = vhci_hub_status, .hub_control = vhci_hub_control, .bus_suspend = vhci_bus_suspend, .bus_resume = vhci_bus_resume, }; static int vhci_hcd_probe(struct platform_device *pdev) { struct usb_hcd *hcd; int ret; usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id); /* * Allocate and initialize hcd. * Our private data is also allocated automatically. */ hcd = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { pr_err("create hcd failed\n"); return -ENOMEM; } hcd->has_tt = 1; /* this is private data for vhci_hcd */ the_controller = hcd_to_vhci(hcd); /* * Finish generic HCD structure initialization and register. * Call the driver's reset() and start() routines. */ ret = usb_add_hcd(hcd, 0, 0); if (ret != 0) { pr_err("usb_add_hcd failed %d\n", ret); usb_put_hcd(hcd); the_controller = NULL; return ret; } usbip_dbg_vhci_hc("bye\n"); return 0; } static int vhci_hcd_remove(struct platform_device *pdev) { struct usb_hcd *hcd; hcd = platform_get_drvdata(pdev); if (!hcd) return 0; /* * Disconnects the root hub, * then reverses the effects of usb_add_hcd(), * invoking the HCD's stop() methods. */ usb_remove_hcd(hcd); usb_put_hcd(hcd); the_controller = NULL; return 0; } #ifdef CONFIG_PM /* what should happen for USB/IP under suspend/resume? */ static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd; int rhport = 0; int connected = 0; int ret = 0; hcd = platform_get_drvdata(pdev); spin_lock(&the_controller->lock); for (rhport = 0; rhport < VHCI_NPORTS; rhport++) if (the_controller->port_status[rhport] & USB_PORT_STAT_CONNECTION) connected += 1; spin_unlock(&the_controller->lock); if (connected > 0) { dev_info(&pdev->dev, "We have %d active connection%s. Do not suspend.\n", connected, (connected == 1 ? "" : "s")); ret = -EBUSY; } else { dev_info(&pdev->dev, "suspend vhci_hcd"); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); } return ret; } static int vhci_hcd_resume(struct platform_device *pdev) { struct usb_hcd *hcd; dev_dbg(&pdev->dev, "%s\n", __func__); hcd = platform_get_drvdata(pdev); set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); usb_hcd_poll_rh_status(hcd); return 0; } #else #define vhci_hcd_suspend NULL #define vhci_hcd_resume NULL #endif static struct platform_driver vhci_driver = { .probe = vhci_hcd_probe, .remove = vhci_hcd_remove, .suspend = vhci_hcd_suspend, .resume = vhci_hcd_resume, .driver = { .name = driver_name, }, }; /* * The VHCI 'device' is 'virtual'; not a real plug&play hardware. * We need to add this virtual device as a platform device arbitrarily: * 1. platform_device_register() */ static void the_pdev_release(struct device *dev) { } static struct platform_device the_pdev = { /* should be the same name as driver_name */ .name = driver_name, .id = -1, .dev = { .release = the_pdev_release, }, }; static int __init vhci_hcd_init(void) { int ret; if (usb_disabled()) return -ENODEV; ret = platform_driver_register(&vhci_driver); if (ret) goto err_driver_register; ret = platform_device_register(&the_pdev); if (ret) goto err_platform_device_register; pr_info(DRIVER_DESC " v" USBIP_VERSION "\n"); return ret; err_platform_device_register: platform_driver_unregister(&vhci_driver); err_driver_register: return ret; } static void __exit vhci_hcd_exit(void) { platform_device_unregister(&the_pdev); platform_driver_unregister(&vhci_driver); } module_init(vhci_hcd_init); module_exit(vhci_hcd_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_VERSION(USBIP_VERSION);