/*
 * <:copyright-BRCM:2014:DUAL/GPL:standard
 * 
 *    Copyright (c) 2014 Broadcom 
 *    All Rights Reserved
 * 
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License, version 2, as published by
 * the Free Software Foundation (the "GPL").
 * 
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * 
 * A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
 * writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
 * Boston, MA 02111-1307, USA.
 * 
 * :>
 */

/*
  These are low level functions that can be called from CFE or from the Linux init code.
  If pinmux changes are needed after Linux init, support should be added to the board
  driver including any necessary locking.
*/

#include "boardparms.h"
#include "bcm_pinmux.h"
#include "bcm_gpio.h"

#ifdef _CFE_
#include "lib_types.h"
#include "lib_printf.h"
#include "lib_string.h"
#include "bcm_map.h"
#define printk  printf
#else // Linux
#include <linux/kernel.h>
#include <linux/module.h>
#include <bcm_map_part.h>
#include <linux/string.h>
#endif

#define DUPLEX_LED      0
#define SPEED_LED_100   1
#define SPEED_LED_1000  2
#define LED_LAN         3

/*
 * Matches a Led definition in boardparms.c with a gpio signal.
 *
 * Each row defines the gpio mappings for a network interface:
 * pin_to_mux[0] -> leds for bp_ulPhyId = 0
 * pin_to_mux[1] -> leds for bp_ulPhyId = 1
 * ...
 * pin_to_mux[n] -> leds for bp_ulPhyId = n
 *
 * Each column defines a led type:
 *
 *  [ duplexLed  , speedLed100 , speedLed1000, LedLan  ]
 */
int pin_to_mux[][4] = {
    {BP_GPIO_NONE, BP_GPIO_NONE, BP_GPIO_NONE, BP_GPIO_NONE},  //(external gphy)
    {BP_GPIO_NONE, BP_GPIO_NONE, BP_GPIO_NONE, BP_GPIO_69_AH}, //(internal gphy)
    {BP_GPIO_NONE, BP_GPIO_NONE, BP_GPIO_NONE, BP_GPIO_NONE}   //(plc)
};

/****************************************************************
 * Name         : bcm_init_pinmux
 *
 * Description  : Walks the boardparms structure for the active
 *                board ID looking for led parameters. For each led
 *                parameter, it finds its gpio_mux match and calls
 *                bcm_set_pinmux to configure the GPIO mux.
 ****************************************************************/
int bcm_init_pinmux(void)
{
    int i;
    int pin;
    int iface_cnt;
    int iface_id;
    const ETHERNET_MAC_INFO *EnetInfo;

    EnetInfo = BpGetEthernetMacInfoArrayPtr();
    bitcount(iface_cnt, EnetInfo[0].sw.port_map);

    for (i = 0; i < iface_cnt; i++)
    {
        iface_id = EnetInfo[0].sw.phy_id[i];
        if ((pin = EnetInfo[0].sw.ledInfo[i].duplexLed) != BP_GPIO_NONE)
            bcm_set_pinmux(pin, pin_to_mux[iface_id][DUPLEX_LED]);
        if ((pin = EnetInfo[0].sw.ledInfo[i].speedLed100) != BP_GPIO_NONE)
            bcm_set_pinmux(pin, pin_to_mux[iface_id][SPEED_LED_100]);
        if ((pin = EnetInfo[0].sw.ledInfo[i].speedLed1000) != BP_GPIO_NONE)
            bcm_set_pinmux(pin, pin_to_mux[iface_id][SPEED_LED_1000]);
        if ((pin = EnetInfo[0].sw.ledInfo[i].LedLan) != BP_GPIO_NONE)
            bcm_set_pinmux(pin, pin_to_mux[iface_id][LED_LAN]);
    }
    return 0;
}

/****************************************************************
 * Name         : bcm_set_pinmux
 *
 * Description  : Given a pin number and a mux gpio, configures the GPIO
 *                mux to connect the pin to the internal gpio
 *
 * Parameters   : [IN] pin_num      - Pin number (physical GPIO)
 *                [IN] mux_num      - Mux GPIO
 *
 * Notes        : This function calls bcm_gpio_set_funcmode to configure
 *                GPIO registers. The caller function must handle both
 *                MUX _and_ GPIO spinlocks when calling this function.
 ****************************************************************/
void bcm_set_pinmux(unsigned int pin_num, unsigned int mux_num)
{
    volatile uint32 *GPIOMuxCtrl;
    int mux_ctrl;
    int mux_nsel;
    unsigned int tmp;

    if (pin_num < 4)
    {
        mux_ctrl = 0;
    } else
    {
        mux_ctrl = (pin_num / 4);
        if (mux_ctrl >= 8)
        {
            printk("Boardparms error: pin_num %d is too big\n", pin_num);
            return;
        }
    }

    mux_nsel = pin_num % 4;
    GPIOMuxCtrl = &(GPIO->GPIOMuxCtrl_0) + mux_ctrl;

    tmp = *GPIOMuxCtrl;
    tmp &= ~(GPIO_0_MUX_NSEL << (8 * mux_nsel));
    tmp |= (mux_num << (8 * mux_nsel));
    *GPIOMuxCtrl = tmp;
    bcm_gpio_set_funcmode(pin_num, GPIO_MUXED_MODE);
}

#ifndef _CFE_
EXPORT_SYMBOL(bcm_set_pinmux);
#endif