/* Copyright (c) 2015 Broadcom Corporation All Rights Reserved <:label-BRCM:2015:DUAL/GPL:standard This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License, version 2, as published by the Free Software Foundation (the "GPL"). This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. :> */ #include "ru.h" #if RU_INCLUDE_FIELD_DB /****************************************************************************** * Field: XLMAC_CONF_DIR_ACC_DATA_WRITE_WRITE_DATA ******************************************************************************/ const ru_field_rec XLMAC_CONF_DIR_ACC_DATA_WRITE_WRITE_DATA_FIELD = { "WRITE_DATA", #if RU_INCLUDE_DESC "", "Direct register access data write register, bits [63:32]. " "Used only for 64-bit register accesses.", #endif XLMAC_CONF_DIR_ACC_DATA_WRITE_WRITE_DATA_FIELD_MASK, 0, XLMAC_CONF_DIR_ACC_DATA_WRITE_WRITE_DATA_FIELD_WIDTH, XLMAC_CONF_DIR_ACC_DATA_WRITE_WRITE_DATA_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_DIR_ACC_DATA_READ_READ_DATA ******************************************************************************/ const ru_field_rec XLMAC_CONF_DIR_ACC_DATA_READ_READ_DATA_FIELD = { "READ_DATA", #if RU_INCLUDE_DESC "", "Direct register access data read register, bits [63:32]. " "Used only for 64-bit register accesses.", #endif XLMAC_CONF_DIR_ACC_DATA_READ_READ_DATA_FIELD_MASK, 0, XLMAC_CONF_DIR_ACC_DATA_READ_READ_DATA_FIELD_WIDTH, XLMAC_CONF_DIR_ACC_DATA_READ_READ_DATA_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_0_RESERVED0 ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_0_RESERVED0_FIELD = { "RESERVED0", #if RU_INCLUDE_DESC "", "", #endif XLMAC_CONF_INDIR_ACC_ADDR_0_RESERVED0_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_0_RESERVED0_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_0_RESERVED0_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_0_ERR ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_0_ERR_FIELD = { "ERR", #if RU_INCLUDE_DESC "", "Transaction Status. When transaction completes (START_BUSY = 0 after it was set to 1) " "and this bit is set it indicates that register transaction completed with error.", #endif XLMAC_CONF_INDIR_ACC_ADDR_0_ERR_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_0_ERR_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_0_ERR_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_0_START_BUSY ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_0_START_BUSY_FIELD = { "START_BUSY", #if RU_INCLUDE_DESC "", "START_BUSY, Self-clearing. CPU writes this bit to 1 in order to initiate indirect register " "read/write transaction. When transaction completes hardware clears this bit.", #endif XLMAC_CONF_INDIR_ACC_ADDR_0_START_BUSY_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_0_START_BUSY_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_0_START_BUSY_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_0_R_W ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_0_R_W_FIELD = { "R_W", #if RU_INCLUDE_DESC "", "Register transaction:\n" "0 : Register Write.\n'" "1 : Register Read.\n", #endif XLMAC_CONF_INDIR_ACC_ADDR_0_R_W_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_0_R_W_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_0_R_W_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_0_REG_PORT_ID ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_0_REG_PORT_ID_FIELD = { "REG_PORT_ID", #if RU_INCLUDE_DESC "", "Register Port ID.", #endif XLMAC_CONF_INDIR_ACC_ADDR_0_REG_PORT_ID_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_0_REG_PORT_ID_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_0_REG_PORT_ID_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_0_REG_OFFSET ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_0_REG_OFFSET_FIELD = { "REG_OFFSET", #if RU_INCLUDE_DESC "", "Register offset.\n" "Note: Bit 7 is ignored by HW. Write it as 0.", #endif XLMAC_CONF_INDIR_ACC_ADDR_0_REG_OFFSET_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_0_REG_OFFSET_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_0_REG_OFFSET_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_DATA_LOW_0_DATA_LOW ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_DATA_LOW_0_DATA_LOW_FIELD = { "DATA_LOW", #if RU_INCLUDE_DESC "", "Indirect register access data register, bits [31:0].", #endif XLMAC_CONF_INDIR_ACC_DATA_LOW_0_DATA_LOW_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_DATA_LOW_0_DATA_LOW_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_DATA_LOW_0_DATA_LOW_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_DATA_HIGH_0_DATA_HIGH ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_DATA_HIGH_0_DATA_HIGH_FIELD = { "DATA_HIGH", #if RU_INCLUDE_DESC "", "Indirect register access data register, bits [63:32]. " "Used only for 64-bit register accesses.", #endif XLMAC_CONF_INDIR_ACC_DATA_HIGH_0_DATA_HIGH_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_DATA_HIGH_0_DATA_HIGH_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_DATA_HIGH_0_DATA_HIGH_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_1_RESERVED0 ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_1_RESERVED0_FIELD = { "RESERVED0", #if RU_INCLUDE_DESC "", "", #endif XLMAC_CONF_INDIR_ACC_ADDR_1_RESERVED0_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_1_RESERVED0_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_1_RESERVED0_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_1_ERR ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_1_ERR_FIELD = { "ERR", #if RU_INCLUDE_DESC "", "Transaction Status. When transaction completes (START_BUSY = 0 after it was set to 1) " "and this bit is set it indicates that register transaction completed with error.", #endif XLMAC_CONF_INDIR_ACC_ADDR_1_ERR_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_1_ERR_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_1_ERR_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_1_START_BUSY ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_1_START_BUSY_FIELD = { "START_BUSY", #if RU_INCLUDE_DESC "", "START_BUSY, Self-clearing. CPU writes this bit to 1 in order to initiate indirect register " "read/write transaction. When transaction completes hardware clears this bit.", #endif XLMAC_CONF_INDIR_ACC_ADDR_1_START_BUSY_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_1_START_BUSY_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_1_START_BUSY_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_1_R_W ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_1_R_W_FIELD = { "R_W", #if RU_INCLUDE_DESC "", "Register transaction:\n" "0 : Register Write.\n'" "1 : Register Read.\n", #endif XLMAC_CONF_INDIR_ACC_ADDR_1_R_W_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_1_R_W_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_1_R_W_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_1_REG_PORT_ID ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_1_REG_PORT_ID_FIELD = { "REG_PORT_ID", #if RU_INCLUDE_DESC "", "Register Port ID.", #endif XLMAC_CONF_INDIR_ACC_ADDR_1_REG_PORT_ID_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_1_REG_PORT_ID_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_1_REG_PORT_ID_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_ADDR_1_REG_OFFSET ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_ADDR_1_REG_OFFSET_FIELD = { "REG_OFFSET", #if RU_INCLUDE_DESC "", "Register offset.\n" "Note: Bit 7 is ignored by HW. Write it as 0.", #endif XLMAC_CONF_INDIR_ACC_ADDR_1_REG_OFFSET_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_ADDR_1_REG_OFFSET_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_ADDR_1_REG_OFFSET_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_DATA_LOW_1_DATA_LOW ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_DATA_LOW_1_DATA_LOW_FIELD = { "DATA_LOW", #if RU_INCLUDE_DESC "", "Indirect register access data register, bits [31:0].", #endif XLMAC_CONF_INDIR_ACC_DATA_LOW_1_DATA_LOW_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_DATA_LOW_1_DATA_LOW_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_DATA_LOW_1_DATA_LOW_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INDIR_ACC_DATA_HIGH_1_DATA_HIGH ******************************************************************************/ const ru_field_rec XLMAC_CONF_INDIR_ACC_DATA_HIGH_1_DATA_HIGH_FIELD = { "DATA_HIGH", #if RU_INCLUDE_DESC "", "Indirect register access data register, bits [63:32]. " "Used only for 64-bit register accesses.", #endif XLMAC_CONF_INDIR_ACC_DATA_HIGH_1_DATA_HIGH_FIELD_MASK, 0, XLMAC_CONF_INDIR_ACC_DATA_HIGH_1_DATA_HIGH_FIELD_WIDTH, XLMAC_CONF_INDIR_ACC_DATA_HIGH_1_DATA_HIGH_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_CONFIG_RESERVED0 ******************************************************************************/ const ru_field_rec XLMAC_CONF_CONFIG_RESERVED0_FIELD = { "RESERVED0", #if RU_INCLUDE_DESC "", "", #endif XLMAC_CONF_CONFIG_RESERVED0_FIELD_MASK, 0, XLMAC_CONF_CONFIG_RESERVED0_FIELD_WIDTH, XLMAC_CONF_CONFIG_RESERVED0_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_CONFIG_XLMAC_RESET ******************************************************************************/ const ru_field_rec XLMAC_CONF_CONFIG_XLMAC_RESET_FIELD = { "XLMAC_RESET", #if RU_INCLUDE_DESC "", "Active high XLMAC hard reset.", #endif XLMAC_CONF_CONFIG_XLMAC_RESET_FIELD_MASK, 0, XLMAC_CONF_CONFIG_XLMAC_RESET_FIELD_WIDTH, XLMAC_CONF_CONFIG_XLMAC_RESET_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_CONFIG_RX_DUAL_CYCLE_TDM_EN ******************************************************************************/ const ru_field_rec XLMAC_CONF_CONFIG_RX_DUAL_CYCLE_TDM_EN_FIELD = { "RX_DUAL_CYCLE_TDM_EN", #if RU_INCLUDE_DESC "", "When set, Rx CDC FIFO read TDM order has same port for 2 consecutive cycles.\n" "This is a strap input for the MAC core and should be changed only while hard reset is asserted.", #endif XLMAC_CONF_CONFIG_RX_DUAL_CYCLE_TDM_EN_FIELD_MASK, 0, XLMAC_CONF_CONFIG_RX_DUAL_CYCLE_TDM_EN_FIELD_WIDTH, XLMAC_CONF_CONFIG_RX_DUAL_CYCLE_TDM_EN_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_CONFIG_RX_NON_LINEAR_QUAD_TDM_EN ******************************************************************************/ const ru_field_rec XLMAC_CONF_CONFIG_RX_NON_LINEAR_QUAD_TDM_EN_FIELD = { "RX_NON_LINEAR_QUAD_TDM_EN", #if RU_INCLUDE_DESC "", "When set, RX CDC FIFO read TDM generation order for quad mode is 0,2,1,3. Otherwise, it is 0,1,2,3.\n" "This is a strap input for the MAC core and should be changed only while hard reset is asserted.", #endif XLMAC_CONF_CONFIG_RX_NON_LINEAR_QUAD_TDM_EN_FIELD_MASK, 0, XLMAC_CONF_CONFIG_RX_NON_LINEAR_QUAD_TDM_EN_FIELD_WIDTH, XLMAC_CONF_CONFIG_RX_NON_LINEAR_QUAD_TDM_EN_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_CONFIG_RX_FLEX_TDM_ENABLE ******************************************************************************/ const ru_field_rec XLMAC_CONF_CONFIG_RX_FLEX_TDM_ENABLE_FIELD = { "RX_FLEX_TDM_ENABLE", #if RU_INCLUDE_DESC "", "Enables non-linear TDM generation on the receive system interface, " " based on data availability in Rx FIFOs.\n" "0 : Flex TDM Enabled.\n" "1 : Flex TDM Disabled.\n", #endif XLMAC_CONF_CONFIG_RX_FLEX_TDM_ENABLE_FIELD_MASK, 0, XLMAC_CONF_CONFIG_RX_FLEX_TDM_ENABLE_FIELD_WIDTH, XLMAC_CONF_CONFIG_RX_FLEX_TDM_ENABLE_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_CONFIG_MAC_MODE ******************************************************************************/ const ru_field_rec XLMAC_CONF_CONFIG_MAC_MODE_FIELD = { "MAC_MODE", #if RU_INCLUDE_DESC "", "Number of ports supported by XLMAC.\n" "000 : Quad Port.\n" "001 : Tri-Port (2/3). Ports 0 and 1 are single lane ports, " " and port 2 is an aggregate port made up of lanes 2 and 3.\n" "010 : Tri-Port (0/1). Ports 2 and 3 are single lane ports, " " and port 0 is an aggregate port made up of lanes 0 and 1.\n" "011 : Dual Port.\n" "1xx : Single Port.", #endif XLMAC_CONF_CONFIG_MAC_MODE_FIELD_MASK, 0, XLMAC_CONF_CONFIG_MAC_MODE_FIELD_WIDTH, XLMAC_CONF_CONFIG_MAC_MODE_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_CONFIG_OSTS_TIMER_DISABLE ******************************************************************************/ const ru_field_rec XLMAC_CONF_CONFIG_OSTS_TIMER_DISABLE_FIELD = { "OSTS_TIMER_DISABLE", #if RU_INCLUDE_DESC "", "OSTS time-stamping disable.\n" "0 : OSTS Enabled.\n" "1 : OSTS Disabled.\n", #endif XLMAC_CONF_CONFIG_OSTS_TIMER_DISABLE_FIELD_MASK, 0, XLMAC_CONF_CONFIG_OSTS_TIMER_DISABLE_FIELD_WIDTH, XLMAC_CONF_CONFIG_OSTS_TIMER_DISABLE_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_CONFIG_BYPASS_OSTS ******************************************************************************/ const ru_field_rec XLMAC_CONF_CONFIG_BYPASS_OSTS_FIELD = { "BYPASS_OSTS", #if RU_INCLUDE_DESC "", "Bypasses transmit OSTS functionality. When set, reduces Tx path latency.\n" "0 : Do not bypass transmit OSTS function.\n" "1 : Bypass transmit OSTS function.\n" "XLMAC must be reset for this bit to take effect.", #endif XLMAC_CONF_CONFIG_BYPASS_OSTS_FIELD_MASK, 0, XLMAC_CONF_CONFIG_BYPASS_OSTS_FIELD_WIDTH, XLMAC_CONF_CONFIG_BYPASS_OSTS_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_CONFIG_EGR_1588_TIMESTAMPING_MODE ******************************************************************************/ const ru_field_rec XLMAC_CONF_CONFIG_EGR_1588_TIMESTAMPING_MODE_FIELD = { "EGR_1588_TIMESTAMPING_MODE", #if RU_INCLUDE_DESC "", "1588 Egress Time-stamping mode.\n" "0 : Legacy, sign extended 32-bit timestamp mode.\n" "1 : 48-bit timestamp mode.\n" "XLMAC must be reset for this bit to take effect.", #endif XLMAC_CONF_CONFIG_EGR_1588_TIMESTAMPING_MODE_FIELD_MASK, 0, XLMAC_CONF_CONFIG_EGR_1588_TIMESTAMPING_MODE_FIELD_WIDTH, XLMAC_CONF_CONFIG_EGR_1588_TIMESTAMPING_MODE_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INTERRUPT_CHECK_RESERVED0 ******************************************************************************/ const ru_field_rec XLMAC_CONF_INTERRUPT_CHECK_RESERVED0_FIELD = { "RESERVED0", #if RU_INCLUDE_DESC "", "", #endif XLMAC_CONF_INTERRUPT_CHECK_RESERVED0_FIELD_MASK, 0, XLMAC_CONF_INTERRUPT_CHECK_RESERVED0_FIELD_WIDTH, XLMAC_CONF_INTERRUPT_CHECK_RESERVED0_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_INTERRUPT_CHECK_XLMAC_INTR_CHECK ******************************************************************************/ const ru_field_rec XLMAC_CONF_INTERRUPT_CHECK_XLMAC_INTR_CHECK_FIELD = { "XLMAC_INTR_CHECK", #if RU_INCLUDE_DESC "", "Each bit of this field corresponds to one XLMAC port." "SW should write 1 to the corresponding bit(s) of this field any time XLMAC interrupt is in use and " "all events obtained by reading XLMAC status register are serviced and " "corresponding statuses cleared. Prevents XLMAC interrupt race condition.", #endif XLMAC_CONF_INTERRUPT_CHECK_XLMAC_INTR_CHECK_FIELD_MASK, 0, XLMAC_CONF_INTERRUPT_CHECK_XLMAC_INTR_CHECK_FIELD_WIDTH, XLMAC_CONF_INTERRUPT_CHECK_XLMAC_INTR_CHECK_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_PORT_0_RXERR_MASK_RESERVED0 ******************************************************************************/ const ru_field_rec XLMAC_CONF_PORT_0_RXERR_MASK_RESERVED0_FIELD = { "RESERVED0", #if RU_INCLUDE_DESC "", "", #endif XLMAC_CONF_PORT_0_RXERR_MASK_RESERVED0_FIELD_MASK, 0, XLMAC_CONF_PORT_0_RXERR_MASK_RESERVED0_FIELD_WIDTH, XLMAC_CONF_PORT_0_RXERR_MASK_RESERVED0_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_PORT_0_RXERR_MASK_RSV_ERR_MASK ******************************************************************************/ const ru_field_rec XLMAC_CONF_PORT_0_RXERR_MASK_RSV_ERR_MASK_FIELD = { "RSV_ERR_MASK", #if RU_INCLUDE_DESC "", "These bits define mask for bits [37:16] of RSV vector. If any of un-masked bits " "(with the exception of bit 23 that is GOOD_PACKET_RECEIVED) is set, " "XLMAC asserts RXERR on its system receive interface.", #endif XLMAC_CONF_PORT_0_RXERR_MASK_RSV_ERR_MASK_FIELD_MASK, 0, XLMAC_CONF_PORT_0_RXERR_MASK_RSV_ERR_MASK_FIELD_WIDTH, XLMAC_CONF_PORT_0_RXERR_MASK_RSV_ERR_MASK_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_PORT_1_RXERR_MASK_RESERVED0 ******************************************************************************/ const ru_field_rec XLMAC_CONF_PORT_1_RXERR_MASK_RESERVED0_FIELD = { "RESERVED0", #if RU_INCLUDE_DESC "", "", #endif XLMAC_CONF_PORT_1_RXERR_MASK_RESERVED0_FIELD_MASK, 0, XLMAC_CONF_PORT_1_RXERR_MASK_RESERVED0_FIELD_WIDTH, XLMAC_CONF_PORT_1_RXERR_MASK_RESERVED0_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_PORT_1_RXERR_MASK_RSV_ERR_MASK ******************************************************************************/ const ru_field_rec XLMAC_CONF_PORT_1_RXERR_MASK_RSV_ERR_MASK_FIELD = { "RSV_ERR_MASK", #if RU_INCLUDE_DESC "", "These bits define mask for bits [37:16] of RSV vector. If any of un-masked bits " "(with the exception of bit 23 that is GOOD_PACKET_RECEIVED) is set, " "XLMAC asserts RXERR on its system receive interface.", #endif XLMAC_CONF_PORT_1_RXERR_MASK_RSV_ERR_MASK_FIELD_MASK, 0, XLMAC_CONF_PORT_1_RXERR_MASK_RSV_ERR_MASK_FIELD_WIDTH, XLMAC_CONF_PORT_1_RXERR_MASK_RSV_ERR_MASK_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_PORT_2_RXERR_MASK_RESERVED0 ******************************************************************************/ const ru_field_rec XLMAC_CONF_PORT_2_RXERR_MASK_RESERVED0_FIELD = { "RESERVED0", #if RU_INCLUDE_DESC "", "", #endif XLMAC_CONF_PORT_2_RXERR_MASK_RESERVED0_FIELD_MASK, 0, XLMAC_CONF_PORT_2_RXERR_MASK_RESERVED0_FIELD_WIDTH, XLMAC_CONF_PORT_2_RXERR_MASK_RESERVED0_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_PORT_2_RXERR_MASK_RSV_ERR_MASK ******************************************************************************/ const ru_field_rec XLMAC_CONF_PORT_2_RXERR_MASK_RSV_ERR_MASK_FIELD = { "RSV_ERR_MASK", #if RU_INCLUDE_DESC "", "These bits define mask for bits [37:16] of RSV vector. If any of un-masked bits " "(with the exception of bit 23 that is GOOD_PACKET_RECEIVED) is set, " "XLMAC asserts RXERR on its system receive interface.", #endif XLMAC_CONF_PORT_2_RXERR_MASK_RSV_ERR_MASK_FIELD_MASK, 0, XLMAC_CONF_PORT_2_RXERR_MASK_RSV_ERR_MASK_FIELD_WIDTH, XLMAC_CONF_PORT_2_RXERR_MASK_RSV_ERR_MASK_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_PORT_3_RXERR_MASK_RESERVED0 ******************************************************************************/ const ru_field_rec XLMAC_CONF_PORT_3_RXERR_MASK_RESERVED0_FIELD = { "RESERVED0", #if RU_INCLUDE_DESC "", "", #endif XLMAC_CONF_PORT_3_RXERR_MASK_RESERVED0_FIELD_MASK, 0, XLMAC_CONF_PORT_3_RXERR_MASK_RESERVED0_FIELD_WIDTH, XLMAC_CONF_PORT_3_RXERR_MASK_RESERVED0_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: XLMAC_CONF_PORT_3_RXERR_MASK_RSV_ERR_MASK ******************************************************************************/ const ru_field_rec XLMAC_CONF_PORT_3_RXERR_MASK_RSV_ERR_MASK_FIELD = { "RSV_ERR_MASK", #if RU_INCLUDE_DESC "", "These bits define mask for bits [37:16] of RSV vector. If any of un-masked bits " "(with the exception of bit 23 that is GOOD_PACKET_RECEIVED) is set, " "XLMAC asserts RXERR on its system receive interface.", #endif XLMAC_CONF_PORT_3_RXERR_MASK_RSV_ERR_MASK_FIELD_MASK, 0, XLMAC_CONF_PORT_3_RXERR_MASK_RSV_ERR_MASK_FIELD_WIDTH, XLMAC_CONF_PORT_3_RXERR_MASK_RSV_ERR_MASK_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; #endif /* RU_INCLUDE_FIELD_DB */ /****************************************************************************** * Register: XLMAC_CONF_DIR_ACC_DATA_WRITE ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_DIR_ACC_DATA_WRITE_FIELDS[] = { &XLMAC_CONF_DIR_ACC_DATA_WRITE_WRITE_DATA_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_DIR_ACC_DATA_WRITE_REG = { "DIR_ACC_DATA_WRITE", #if RU_INCLUDE_DESC "XLMAC 1 32-bit Direct Access Data Write Register", "", #endif XLMAC_CONF_DIR_ACC_DATA_WRITE_REG_OFFSET, 0, 0, 229, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 1, XLMAC_CONF_DIR_ACC_DATA_WRITE_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_DIR_ACC_DATA_READ ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_DIR_ACC_DATA_READ_FIELDS[] = { &XLMAC_CONF_DIR_ACC_DATA_READ_READ_DATA_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_DIR_ACC_DATA_READ_REG = { "DIR_ACC_DATA_READ", #if RU_INCLUDE_DESC "XLMAC 1 32-bit Direct Access Data Read Register", "", #endif XLMAC_CONF_DIR_ACC_DATA_READ_REG_OFFSET, 0, 0, 230, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 1, XLMAC_CONF_DIR_ACC_DATA_READ_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_INDIR_ACC_ADDR_0 ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_INDIR_ACC_ADDR_0_FIELDS[] = { &XLMAC_CONF_INDIR_ACC_ADDR_0_RESERVED0_FIELD, &XLMAC_CONF_INDIR_ACC_ADDR_0_ERR_FIELD, &XLMAC_CONF_INDIR_ACC_ADDR_0_START_BUSY_FIELD, &XLMAC_CONF_INDIR_ACC_ADDR_0_R_W_FIELD, &XLMAC_CONF_INDIR_ACC_ADDR_0_REG_PORT_ID_FIELD, &XLMAC_CONF_INDIR_ACC_ADDR_0_REG_OFFSET_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_INDIR_ACC_ADDR_0_REG = { "INDIR_ACC_ADDR_0", #if RU_INCLUDE_DESC "XLMAC 1 Indirect Access Address Register", "", #endif XLMAC_CONF_INDIR_ACC_ADDR_0_REG_OFFSET, 0, 0, 231, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 6, XLMAC_CONF_INDIR_ACC_ADDR_0_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_INDIR_ACC_DATA_LOW_0 ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_INDIR_ACC_DATA_LOW_0_FIELDS[] = { &XLMAC_CONF_INDIR_ACC_DATA_LOW_0_DATA_LOW_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_INDIR_ACC_DATA_LOW_0_REG = { "INDIR_ACC_DATA_LOW_0", #if RU_INCLUDE_DESC "XLMAC 1 Indirect Access Data Low Register", "", #endif XLMAC_CONF_INDIR_ACC_DATA_LOW_0_REG_OFFSET, 0, 0, 232, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 1, XLMAC_CONF_INDIR_ACC_DATA_LOW_0_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_INDIR_ACC_DATA_HIGH_0 ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_INDIR_ACC_DATA_HIGH_0_FIELDS[] = { &XLMAC_CONF_INDIR_ACC_DATA_HIGH_0_DATA_HIGH_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_INDIR_ACC_DATA_HIGH_0_REG = { "INDIR_ACC_DATA_HIGH_0", #if RU_INCLUDE_DESC "XLMAC 1 Indirect Access Data High Register", "", #endif XLMAC_CONF_INDIR_ACC_DATA_HIGH_0_REG_OFFSET, 0, 0, 233, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 1, XLMAC_CONF_INDIR_ACC_DATA_HIGH_0_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_INDIR_ACC_ADDR_1 ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_INDIR_ACC_ADDR_1_FIELDS[] = { &XLMAC_CONF_INDIR_ACC_ADDR_1_RESERVED0_FIELD, &XLMAC_CONF_INDIR_ACC_ADDR_1_ERR_FIELD, &XLMAC_CONF_INDIR_ACC_ADDR_1_START_BUSY_FIELD, &XLMAC_CONF_INDIR_ACC_ADDR_1_R_W_FIELD, &XLMAC_CONF_INDIR_ACC_ADDR_1_REG_PORT_ID_FIELD, &XLMAC_CONF_INDIR_ACC_ADDR_1_REG_OFFSET_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_INDIR_ACC_ADDR_1_REG = { "INDIR_ACC_ADDR_1", #if RU_INCLUDE_DESC "XLMAC 1 Indirect Access Address Register", "", #endif XLMAC_CONF_INDIR_ACC_ADDR_1_REG_OFFSET, 0, 0, 234, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 6, XLMAC_CONF_INDIR_ACC_ADDR_1_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_INDIR_ACC_DATA_LOW_1 ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_INDIR_ACC_DATA_LOW_1_FIELDS[] = { &XLMAC_CONF_INDIR_ACC_DATA_LOW_1_DATA_LOW_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_INDIR_ACC_DATA_LOW_1_REG = { "INDIR_ACC_DATA_LOW_1", #if RU_INCLUDE_DESC "XLMAC 1 Indirect Access Data Low Register", "", #endif XLMAC_CONF_INDIR_ACC_DATA_LOW_1_REG_OFFSET, 0, 0, 235, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 1, XLMAC_CONF_INDIR_ACC_DATA_LOW_1_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_INDIR_ACC_DATA_HIGH_1 ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_INDIR_ACC_DATA_HIGH_1_FIELDS[] = { &XLMAC_CONF_INDIR_ACC_DATA_HIGH_1_DATA_HIGH_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_INDIR_ACC_DATA_HIGH_1_REG = { "INDIR_ACC_DATA_HIGH_1", #if RU_INCLUDE_DESC "XLMAC 1 Indirect Access Data High Register", "", #endif XLMAC_CONF_INDIR_ACC_DATA_HIGH_1_REG_OFFSET, 0, 0, 236, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 1, XLMAC_CONF_INDIR_ACC_DATA_HIGH_1_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_CONFIG ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_CONFIG_FIELDS[] = { &XLMAC_CONF_CONFIG_RESERVED0_FIELD, &XLMAC_CONF_CONFIG_XLMAC_RESET_FIELD, &XLMAC_CONF_CONFIG_RX_DUAL_CYCLE_TDM_EN_FIELD, &XLMAC_CONF_CONFIG_RX_NON_LINEAR_QUAD_TDM_EN_FIELD, &XLMAC_CONF_CONFIG_RX_FLEX_TDM_ENABLE_FIELD, &XLMAC_CONF_CONFIG_MAC_MODE_FIELD, &XLMAC_CONF_CONFIG_OSTS_TIMER_DISABLE_FIELD, &XLMAC_CONF_CONFIG_BYPASS_OSTS_FIELD, &XLMAC_CONF_CONFIG_EGR_1588_TIMESTAMPING_MODE_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_CONFIG_REG = { "CONFIG", #if RU_INCLUDE_DESC "XLMAC 1 Configure Register", "", #endif XLMAC_CONF_CONFIG_REG_OFFSET, 0, 0, 237, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 9, XLMAC_CONF_CONFIG_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_INTERRUPT_CHECK ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_INTERRUPT_CHECK_FIELDS[] = { &XLMAC_CONF_INTERRUPT_CHECK_RESERVED0_FIELD, &XLMAC_CONF_INTERRUPT_CHECK_XLMAC_INTR_CHECK_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_INTERRUPT_CHECK_REG = { "INTERRUPT_CHECK", #if RU_INCLUDE_DESC "XLMAC 1 Interrupt Check Register", "", #endif XLMAC_CONF_INTERRUPT_CHECK_REG_OFFSET, 0, 0, 238, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 2, XLMAC_CONF_INTERRUPT_CHECK_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_PORT_0_RXERR_MASK ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_PORT_0_RXERR_MASK_FIELDS[] = { &XLMAC_CONF_PORT_0_RXERR_MASK_RESERVED0_FIELD, &XLMAC_CONF_PORT_0_RXERR_MASK_RSV_ERR_MASK_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_PORT_0_RXERR_MASK_REG = { "PORT_0_RXERR_MASK", #if RU_INCLUDE_DESC "XLMAC 1 Port 3 RXERR Mask Register", "", #endif XLMAC_CONF_PORT_0_RXERR_MASK_REG_OFFSET, 0, 0, 239, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 2, XLMAC_CONF_PORT_0_RXERR_MASK_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_PORT_1_RXERR_MASK ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_PORT_1_RXERR_MASK_FIELDS[] = { &XLMAC_CONF_PORT_1_RXERR_MASK_RESERVED0_FIELD, &XLMAC_CONF_PORT_1_RXERR_MASK_RSV_ERR_MASK_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_PORT_1_RXERR_MASK_REG = { "PORT_1_RXERR_MASK", #if RU_INCLUDE_DESC "XLMAC 1 Port 3 RXERR Mask Register", "", #endif XLMAC_CONF_PORT_1_RXERR_MASK_REG_OFFSET, 0, 0, 240, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 2, XLMAC_CONF_PORT_1_RXERR_MASK_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_PORT_2_RXERR_MASK ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_PORT_2_RXERR_MASK_FIELDS[] = { &XLMAC_CONF_PORT_2_RXERR_MASK_RESERVED0_FIELD, &XLMAC_CONF_PORT_2_RXERR_MASK_RSV_ERR_MASK_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_PORT_2_RXERR_MASK_REG = { "PORT_2_RXERR_MASK", #if RU_INCLUDE_DESC "XLMAC 1 Port 3 RXERR Mask Register", "", #endif XLMAC_CONF_PORT_2_RXERR_MASK_REG_OFFSET, 0, 0, 241, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 2, XLMAC_CONF_PORT_2_RXERR_MASK_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: XLMAC_CONF_PORT_3_RXERR_MASK ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *XLMAC_CONF_PORT_3_RXERR_MASK_FIELDS[] = { &XLMAC_CONF_PORT_3_RXERR_MASK_RESERVED0_FIELD, &XLMAC_CONF_PORT_3_RXERR_MASK_RSV_ERR_MASK_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec XLMAC_CONF_PORT_3_RXERR_MASK_REG = { "PORT_3_RXERR_MASK", #if RU_INCLUDE_DESC "XLMAC 1 Port 3 RXERR Mask Register", "", #endif XLMAC_CONF_PORT_3_RXERR_MASK_REG_OFFSET, 0, 0, 242, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 2, XLMAC_CONF_PORT_3_RXERR_MASK_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Block: XLMAC_CONF ******************************************************************************/ static const ru_reg_rec *XLMAC_CONF_REGS[] = { &XLMAC_CONF_DIR_ACC_DATA_WRITE_REG, &XLMAC_CONF_DIR_ACC_DATA_READ_REG, &XLMAC_CONF_INDIR_ACC_ADDR_0_REG, &XLMAC_CONF_INDIR_ACC_DATA_LOW_0_REG, &XLMAC_CONF_INDIR_ACC_DATA_HIGH_0_REG, &XLMAC_CONF_INDIR_ACC_ADDR_1_REG, &XLMAC_CONF_INDIR_ACC_DATA_LOW_1_REG, &XLMAC_CONF_INDIR_ACC_DATA_HIGH_1_REG, &XLMAC_CONF_CONFIG_REG, &XLMAC_CONF_INTERRUPT_CHECK_REG, &XLMAC_CONF_PORT_0_RXERR_MASK_REG, &XLMAC_CONF_PORT_1_RXERR_MASK_REG, &XLMAC_CONF_PORT_2_RXERR_MASK_REG, &XLMAC_CONF_PORT_3_RXERR_MASK_REG, }; unsigned long XLMAC_CONF_ADDRS[] = { 0x8013d000, 0x8013d200, }; const ru_block_rec XLMAC_CONF_BLOCK = { "XLMAC_CONF", XLMAC_CONF_ADDRS, 2, 14, XLMAC_CONF_REGS }; /* End of file BCM6858_A0XLMAC_CONF.c */