/*
    Copyright 2000-2012 Broadcom Corporation

    <:label-BRCM:2012:DUAL/GPL:standard
    
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License, version 2, as published by
    the Free Software Foundation (the "GPL").
    
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    
    
    A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
    writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
    Boston, MA 02111-1307, USA.
    
    :>
*/                       

#ifndef __ROBOSW_REG_H
#define __ROBOSW_REG_H

/* 
    Caution:
    The parameters defined in this file are only used by bcm_ethsw_impl2.c switch
    basic initialization code as well as CFE initialization code. 
    It is not defined for Linux environment code since CFE/SwInit has different
    port numbering and structure definition from Linux code but using the same
    Macro names.
    Don't include this head file in any Linux code other than bcm_ethsw_impl2.c.
    If you need to expand shared parameters for robo switch, add them into
    robosw_reg_shared.h instead.
*/

#include "robosw_reg_shared.h"

// These macros make offset validation vs. data sheet easier.

#define group(type, name, start_offset, next) type name[(next - start_offset) / sizeof(type)]
#define entry(type, name, start_offset, next) type name

typedef struct RoboSwitch {
  group(byte,     PortCtrl,     0x0000, 0x0009);
  group(byte,     Reserved0009, 0x0009, 0x000b);
  entry(byte,     SwitchMode,   0x000b, 0x000c);
  entry(uint16,   PauseQuanta,  0x000c, 0x000e);
  entry(byte,     ImpOverride,  0x000e, 0x000f);
  entry(byte,     LedRefresh,   0x000f, 0x0010);
  entry(uint16,   LedFunc0,     0x0010, 0x0012);
  entry(uint16,   LedFunc1,     0x0012, 0x0014);
  entry(uint16,   LedFuncMap,   0x0014, 0x0016);
  entry(uint16,   LedEnableMap, 0x0016, 0x0018);
  entry(uint16,   LedMap0,      0x0018, 0x001a);
  entry(uint16,   LedMap1,      0x001a, 0x001c);
  group(byte,     Reserved001c, 0x001c, 0x0020);
  group(byte,     Reserved0020, 0x0020, 0x0021);
  entry(byte,     ForwardCtrl,  0x0021, 0x0022);
  group(byte,     Reserved0022, 0x0022, 0x0024);
  entry(uint16,   ProtSelect,   0x0024, 0x0026);
  entry(uint16,   WanSelect,    0x0026, 0x0028);
  entry(uint32,   PauseCap,     0x0028, 0x002c);
  group(byte,     Reserved002c, 0x002c, 0x002f);
  entry(byte,     MultiCtrl,    0x002f, 0x0030);
  group(byte,     Reserved0030, 0x0030, 0x0031);
  entry(byte,     TxqFlush,     0x0031, 0x0032);
  entry(uint16,   UniFail,      0x0032, 0x0034);
  entry(uint16,   MultiFail,    0x0034, 0x0036);
  entry(uint16,   MlfIpmc,      0x0036, 0x0038);
  entry(uint16,   PausePassRx,  0x0038, 0x003a);
  entry(uint16,   PausePassTx,  0x003a, 0x003c);
  entry(uint16,   DisableLearn, 0x003c, 0x003e);
  group(byte,     Reserved003e, 0x003e, 0x004a);
  entry(uint16,   PllTest,      0x004a, 0x004c);
  group(byte,     Reserved004c, 0x004c, 0x0058);
  group(byte,     PortOverride, 0x0058, 0x0060);
  group(byte,	  Reserved0061, 0x0060, 0x0064);
  entry(byte,     ImpRgmiiCtrlP4, 0x0064, 0x0065);
  entry(byte,	  ImpRgmiiCtrlP5, 0x0065, 0x0066);
  entry(byte,     ImpRgmiiCtrlP6, 0x0066, 0x0067);
  entry(byte,	  ImpRgmiiCtrlP7, 0x0067, 0x0068);
  group(byte,     Reserved0068, 0x0068, 0x006c);
  entry(byte,     ImpRgmiiTimingDelayP4, 0x006c, 0x006d);
  entry(byte,	  ImpRgmiiTimingDelayP5, 0x006d, 0x006e);
  entry(byte,     ImpRgmiiTimingDelayP6, 0x006e, 0x006f);
  entry(byte,	  ImpRgmiiTimingDelayP7, 0x006f, 0x0070);
  group(byte,     Reserved0070, 0x0070, 0x0079);
  entry(byte,     SWResetCtrl,  0x0079, 0x007a);
  group(byte,     Reserved007a, 0x007a, 0x0090);
  entry(uint32,   Rxfilt_Ctl,   0x0090, 0x0094);
  entry(uint32,   Cmf_En_Ctl,   0x0094, 0x0098);
  group(byte,     Reserved0098, 0x0098, 0x00a0);
  entry(uint32,   SwpktCtrl0,   0x00a0, 0x00a4);
  entry(uint32,   SwpktCtrl1,   0x00a4, 0x00a8);
  group(byte,     Reserved00a8, 0x00a8, 0x00b0);
  entry(uint32,   MdioCtrl,     0x00b0, 0x00b4);
  entry(uint16,   MdioData,     0x00b4, 0x00b6);
  group(byte,     Reserved00b4, 0x00b6, 0x0200);
  entry(byte,     GlbMgmt,      0x0200, 0x0201);
  entry(byte,     ChpBoxID,     0x0201, 0x0202);
  entry(byte,     MngPID,       0x0202, 0x0203);
  group(byte,     Reserved0203, 0x0203, 0x1100);
  entry(uint16,   MIICtrl0,     0x1100, 0x1101);

} RoboSwitch;

#define SWITCH ((volatile RoboSwitch * const)SWITCH_BASE)
#define PAGE_PBVLAN     0x31
#define PBVLAN_OFFSET   (PAGE_PBVLAN << 8)
#define PBMAP_MIPS 0x100
#define SWITCH_PBVLAN ((volatile uint16 * const)(SWITCH_BASE + PBVLAN_OFFSET))

#define PortCtrl_Forwarding   0xa0
#define PortCtrl_Learning     0x80
#define PortCtrl_Listening    0x60
#define PortCtrl_Blocking     0x40
#define PortCtrl_Disable      0x20
#define PortCtrl_RxUcstEn     0x10
#define PortCtrl_RxMcstEn     0x08
#define PortCtrl_RxBcstEn     0x04
#define PortCtrl_DisableTx    0x02
#define PortCtrl_DisableRx    0x01

#define SwitchMode_FwdgEn     0x02
#define SwitchMode_ManageMode 0x01

#define ImpOverride_Force     0x80
#define ImpOverride_TxFlow    0x20
#define ImpOverrode_RxFlow    0x10
#define ImpOverride_1000Mbs   0x08
#define ImpOverride_100Mbs    0x04
#define ImpOverride_10Mbs     0x00
#define ImpOverride_Fdx       0x02
#define ImpOverride_Linkup    0x01

#define PortOverride_Enable   0x40
#define PortOverride_TxFlow   0x20
#define PortOverride_RxFlow   0x10
#define PortOverride_1000Mbs  0x08
#define PortOverride_100Mbs   0x04
#define PortOverride_10Mbs    0x00
#define PortOverride_Fdx      0x02
#define PortOverride_Linkup   0x01

#define GlbMgmt_EnableImp     0x80
#define GlbMgmt_IgmpSnooping  0x08
#define GlbMgmt_ReceiveBpdu   0x02
#define GlbMgmt_ResetMib      0x01

#define MdioCtrl_Write        (1 << 31)
#define MdioCtrl_Read         (1 << 30)
#define MdioCtrl_Ext          (1 << 16)
#define MdioCtrl_ID_Shift     25
#define MdioCtrl_ID_Mask      (0x1f << MdioCtrl_ID_Shift)
#define MdioCtrl_Addr_Shift   20
#define MdioCtrl_Addr_Mask    (0x1f << MdioCtrl_Addr_Shift)

#define ImpRgmiiCtrl_GMII_En        0x80
#define ImpRgmiiCtrl_Force_RGMII    0x40
#define ImpRgmiiCtrl_Mode_RGMII     0x00
#define ImpRgmiiCtrl_Mode_RvMII     0x20
#define ImpRgmiiCtrl_Mode_MII       0x10
#define ImpRgmiiCtrl_Mode_GMII      0x30
#define ImpRgmiiCtrl_Mode_Mask      0x30
#define ImpRgmiiCtrl_DLL_IDDQ       0x04
#define ImpRgmiiCtrl_DLL_RXC_Bypass 0x02
#define ImpRgmiiCtrl_Timing_Sel     0x01

#define ImpRgmiiTimingDelayDefault  0xF9

#define PORT_4_PORT_ID  4
#define PORT_5_PORT_ID  5
#define PORT_6_PORT_ID  6
#define PORT_7_PORT_ID  7

#if defined (_BCM963268_) || defined(CONFIG_BCM963268)
#define EPHY_PORTS      8
#define GPHY_PORT_ID    3
#endif
#if defined (_BCM963381_) || defined(CONFIG_BCM963381)
#define EPHY_PORTS      8
#define GPHY_PORT_ID    3
#endif


void ethsw_rreg_ext(int access_type, int page, int reg, uint8 *data, int len);
void ethsw_wreg_ext(int access_type, int page, int reg, uint8 *data, int len);

/* definitions for access_type */
#define MDIO_BUS        0
#define SPI_BUS         1

void robosw_check_ports(void);

#endif