#include "63138.dtsi"
#include "../bcm_voice.dtsi"

/ {
	memory_controller {
		memcfg = <(BP_DDR_SPEED_800_11_11_11   | \
			BP_DDR_TOTAL_SIZE_1024MB  | \
			BP_DDR_DEVICE_WIDTH_8)>;
	};

	buttons {
		compatible = "brcm,buttons";
		reset_button {
			ext_irq = <&bca_extintr 32 BCA_GPIO_ACTIVE_LOW (BCA_EXTINTR_TYPE_LOW_LEVEL | BCA_EXTINTR_TYPE_SENSE_LEVEL)>;
			press {
				print = "Button Press -- Hold for 5s to do restore to default";
			};
			hold {
				rst_to_dflt = <5>;
			};
			release {
				reset = <0>;
			};	
		};
		ses_button {
			ext_irq = <&bca_extintr 33 BCA_GPIO_ACTIVE_LOW (BCA_EXTINTR_TYPE_LOW_LEVEL | BCA_EXTINTR_TYPE_SENSE_LEVEL)>;
			release {
				ses_short_period = <0>;
				ses_long_period = <3>;
			};
		};
	};
	dect_reset:dect_reset {
		compatible = "brcm,voice-dect-reset";
		dectreset-gpio = <&gpioc 62 GPIO_ACTIVE_HIGH>;
	};
};

&bcm_voice{
	sliclist = SLICSLAC_LIST_COMMON_NOFXO;
 };

&hsspi {
	status = "okay";
	voice0 {
		pinctrl-0 = <&a_spim_ss1_b_pin_127>;
		pinctrl-names = "default";
		compatible = "bcm-spi-voice";
		reg = <1>; /* chip select 1 */
		spi-max-frequency = <1024000>;
		reset-gpio = <&gpioc 60 GPIO_ACTIVE_LOW>;
		spi-index = <0>;/* voice header index */
	};
	voice1 {
		pinctrl-0 = <&spim_ss2_b_2_pin_25>;
		pinctrl-names = "default";
		compatible = "bcm-spi-voice";
		reg = <2>; /* chip select 2 */
		spi-max-frequency = <1024000>;
		reset-gpio = <&gpioc 61 GPIO_ACTIVE_LOW>;
		spi-index = <1>;/* voice header index */
	};
	voice2 {
		pinctrl-0 = <&spim_ss4_b_pin_8>;
		pinctrl-names = "default";
		compatible = "bcm-spi-voice";
		reg = <4>; /* chip select 3 */
		spi-max-frequency = <1024000>;
		/*reset-gpio = NA;*/
		spi-index = <2>;/* voice header index */
	};
};

&vreg_sync {
		pinctrl-0 = <&vreg_clk_pin_18>;
		pinctrl-names = "default";
};

&mdio_sf2 {
	/* PHYs directly connected to SF2 */
	gphy8:8 {
		status = "okay";
	};
	gphy9:9 {
		status = "okay";
	};
	gphya:a {
		status = "okay";
	};

	/* PHYs connected to crossbar */
	gphyb:b {
		status = "okay";
	};
	gphyc:c {
		status = "okay";
	};
	phy_serdes0:serdes0 {
		status = "okay";
	};

	/* Crossbar groups */
	xbar_grp0:0 {
		phy-handle = <&gphyb>;
		status = "okay";
	};
	xbar_grp2:2 {
		phy-handle = <&gphyc &phy_serdes0>;
		status = "okay";
	};
};

&switch_sf2 {
	ports {
		/* ports connect directly */
		sf2_port0@0 {
			phy-handle = <&gphy8>;
			network-leds = <&led0 &led1 &led28>;
			status = "okay";
		};

		sf2_port1@1 {
			phy-handle = <&gphy9>;
			network-leds = <&led2 &led3 &led11>;
			status = "okay";
		};

		sf2_port2@2 {
			phy-handle = <&gphya>;
			network-leds = <&led4 &led5 &led12>;
			status = "okay";
		};

		/* ports connected to crossbar */
		sf2_port3@3 {
			phy-handle = <&xbar_grp0>;
			network-leds = <&led6 &led7 &led13>;
			status = "okay";
		};
	};
};

&switch0 {
	ports {
		
		port0@0 {
			phy-handle = <&xbar_grp2>;
			phy-mode = "serdes";
			status = "okay";
		};
	};
};

&legacy_leds {
	adsl-led = <&led17>;
	adsl-fail-led = <&led16>;
	sec-adsl-led = <&led21>;
	sec-adsl-fail-led = <&led20>;
	wan-data-led = <&led15>;
	wl-sess-led = <&led24>;
	voip1-ok-led = <&led29>;
	voip2-ok-led = <&led30>;
};

&led_ctrl {
    led0: port_0-led_0-pin_0 {
        active_low;
        link = <(LED_SPEED_1G)>;
        status = "okay";
    };
    led1: port_0-led_1-pin_1 {
        active_low;
        link = <(LED_SPEED_100)>;
        status = "okay";
    };
    led2: port_1-led_0-pin_2 {
        active_low;
        link = <(LED_SPEED_1G)>;
        status = "okay";
    };
    led3: port_1-led_1-pin_3 {
        active_low;
        link = <(LED_SPEED_100)>;
        status = "okay";
    };
    led4: port_2-led_0-pin_4 {
        active_low;
        link = <(LED_SPEED_1G)>;
        status = "okay";
    };
    led5: port_2-led_1-pin_5 {
        active_low;
        link = <(LED_SPEED_100)>;
        status = "okay";
    };
    led6: port_3-led_0-pin_6 {
        active_low;
        link = <(LED_SPEED_1G)>;
        status = "okay";
    };
    led7: port_3-led_1-pin_7 {
        active_low;
        link = <(LED_SPEED_100)>;
        status = "okay";
    };
    led11: port_1-led_2-pin_11 {
        active_low;
        activity = <(LED_SPEED_100|LED_SPEED_1G)>;
        link = <(LED_SPEED_100|LED_SPEED_1G)>;
        status = "okay";
    };
    led12: port_2-led_2-pin_12 {
        active_low;
        activity = <(LED_SPEED_100|LED_SPEED_1G)>;
        link = <(LED_SPEED_100|LED_SPEED_1G)>;
        status = "okay";
    };
    led13: port_3-led_2-pin_13 {
        active_low;
        activity = <(LED_SPEED_100|LED_SPEED_1G)>;
        link = <(LED_SPEED_100|LED_SPEED_1G)>;
        status = "okay";
    };
    led14: port_4-led_2-pin_14 {
        active_low;
        activity = <(LED_SPEED_100|LED_SPEED_1G)>;
        link = <(LED_SPEED_100|LED_SPEED_1G)>;
        status = "okay";
    };	
    led15: wan_0-data-pin_15 {
        active_low;
        status = "okay";
    };
    led16: sw_led_16-pin_16 {
        active_low;
        status = "okay";
    };
    led17: sw_led_17-pin_17 {
        active_low;
        status = "okay";
    };
	led19: wan_1-data-pin_19 {
        active_low;
        status = "okay";
    };
    led20: sw_led_20-pin_20 {
        active_low;
        status = "okay";
    };
    led21: sw_led_21-pin_21 {
        active_low;
        status = "okay";
    };
    led22: sw_led_22-pin_22 {
        active_low;
        status = "okay";
    };
    led23: sw_led_23-pin_23 {
        active_low;
        status = "okay";
    };
    led24: sw_led_24-pin_24 {
        active_low;
        status = "okay";
    };
    led26: port_4-led_0-pin_26 {
        active_low;
        link = <LED_SPEED_1G>;
        status = "okay";
    };
	led27: port_4-led_1-pin_27 {
        active_low;
        link = <LED_SPEED_100>;
        status = "okay";
    };
    led28: port_0-led_2-pin_28 {
        active_low;
        activity = <(LED_SPEED_100|LED_SPEED_1G)>;
        link = <(LED_SPEED_100|LED_SPEED_1G)>;
        status = "okay";
    };
    led29: sw_led_29-pin_29 {
        active_low;
        status = "okay";
    };
    led30: sw_led_30-pin_30 {
        active_low;
        status = "okay";
    };
    led31: sw_led_31-pin_31 {
        active_low;
        status = "okay";
    };
};