/* <:copyright-BRCM:2004:DUAL/GPL:standard Copyright (c) 2004 Broadcom All Rights Reserved Unless you and Broadcom execute a separate written software license agreement governing use of this software, this software is licensed to you under the terms of the GNU General Public License version 2 (the "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, with the following added to such license: As a special exception, the copyright holders of this software give you permission to link this software with independent modules, and to copy and distribute the resulting executable under terms of your choice, provided that you also meet, for each linked independent module, the terms and conditions of the license of that module. An independent module is a module which is not derived from this software. The special exception does not apply to any modifications of the software. Not withstanding the above, under no circumstances may you combine this software in any way with any other Broadcom software provided under a license other than the GPL, without Broadcom's express prior written consent. :> */ /******************************************************************* * DiagDef.h * * Description: * Diag definitions * * $Revision: 1.35 $ * * $Id: DiagDef.h,v 1.35 2009/01/08 23:54:48 tonytran Exp $ * * $Log: DiagDef.h,v $ * Revision 1.35 2009/01/08 23:54:48 tonytran * Added filters to Status Window and Proxy Client; Added options for Parser to parse a certain statuses; Added an option to download the binary status file from the Proxy Server; Fixed a reconnecting problem b/w the Proxy Client and Server which occur sometimes when the Client got timeout from getting chipId * * Revision 1.34 2008/05/23 05:31:56 tonytran * Added VDSL AFE test configuration support * Display Nitro status correctly for VDSL2 * Display PhyR status per direction in State Window when either US or DS PhyR is enabled and display PhyR status and counters in the Counter Dialog Box * Added mibgettofile command * Send the test reverb command before file download to prevent the 6368 board crash when file download is initiated during showtime * * Revision 1.33 2008/03/11 19:11:39 tonytran * Added an option to File menu to unlock a connection from another session and start a new session. This changes along with the 20m_rc4 driver(to be released) will eliminate the issue with DslDiags connection being disconnected by another session by accident * * Revision 1.32 2007/11/14 23:33:55 tonytran * Added VDSL2 configuration option: profiles and modulation selection and US0 enable/disable * * Revision 1.31 2007/10/17 07:46:01 tonytran * Added Generic Profiling support, DslDiags session lock option, and improved dynamic Cycle Profile graph display * * Revision 1.30 2007/03/05 18:33:28 tonytran * Added DIAG_DEBUG_CMD_SET_L2_TIMEOUT * * Revision 1.29 2007/02/22 05:00:17 ilyas * Added logr - log after reset command to do TEQ logging after PHY reset or download * * Revision 1.28 2006/08/08 20:04:14 dadityan * ^M clean up * * Revision 1.27 2006/08/08 08:01:44 dadityan * Diags Pass OEM Param * * Revision 1.26 2006/06/12 22:26:11 ilyas * Updated version number and made release 21 * * Revision 1.25 2006/03/31 16:32:41 ovandewi * changes for PLN and NL from MIB * * Revision 1.24 2006/03/31 09:08:58 dadityan * Added LOG_CMD_CFG_PHY2 * * Revision 1.23 2005/07/14 23:43:20 ilyas * Added command to start data logging * * Revision 1.22 2004/10/16 23:43:19 ilyas * Added playback resume command * * Revision 1.21 2004/10/16 23:24:08 ilyas * Improved FileRead command support for LOG file playback (RecordTest on the board) * * Revision 1.20 2004/04/28 16:52:32 ilyas * Added GDB frame processing * * Revision 1.19 2004/03/10 22:26:53 ilyas * Added command-line parameter for IP port number. * Added proxy remote termination * * Revision 1.18 2004/01/24 23:41:37 ilyas * Added DIAG_DEBUG_CMD_LOG_SAMPLES debug command * * Revision 1.17 2003/11/19 02:25:45 ilyas * Added definitions for LOG frame retransmission, time, ADSL2 plots * * Revision 1.16 2003/11/14 18:46:05 ilyas * Added G992p3 debug commands * * Revision 1.15 2003/10/02 19:50:41 ilyas * Added support for buffering data for AnnexI and statistical counters * * Revision 1.14 2003/09/03 19:45:11 ilyas * To refuse connection with older protocol versions * * Revision 1.13 2003/08/30 00:12:39 ilyas * Added support for running chip test regressions via DslDiags * * Revision 1.12 2003/08/12 00:19:28 ilyas * Improved image downloading protocol. * Added DEBUG command support * * Revision 1.11 2003/04/11 00:37:24 ilyas * Added DiagProtoFrame definition * * Revision 1.10 2003/03/25 00:10:07 ilyas * Added command for "long" BERT test * * Revision 1.9 2003/01/30 03:29:32 ilyas * Added PHY_CFG support and fixed printing showtime counters * * Revision 1.8 2002/12/16 20:56:38 ilyas * Added support for binary statuses * * Revision 1.7 2002/12/06 20:19:13 ilyas * Added support for binary statuses and scrambled status strings * * Revision 1.6 2002/11/05 00:18:27 ilyas * Added configuration dialog box for Eye tone selection. * Added Centillium CRC workaround to AnnexC config dialog * Bit allocation update on bit swap messages * * Revision 1.5 2002/07/30 23:23:43 ilyas * Implemented DIAG configuration command for AnnexA and AnnexC * * Revision 1.4 2002/07/30 22:47:15 ilyas * Added DIAG command for configuration * * Revision 1.3 2002/07/15 23:52:51 ilyas * iAdded switch RJ11 pair command * * Revision 1.2 2002/04/25 17:55:51 ilyas * Added mibGet command * * Revision 1.1 2002/04/02 22:56:39 ilyas * Support DIAG connection at any time; BERT commands * * ******************************************************************/ #if !defined(_DIAGDEF_H_) #define _DIAGDEF_H_ #if defined(__cplusplus) extern "C" { #endif #define LOG_PROTO_ID "*L" #define DIAG_PARTY_ID_MASK 0x01 #define LOG_PARTY_CLIENT 0x01 #define LOG_PARTY_SERVER 0x00 #define DIAG_PARTY_LINEID_MASK 0x06 #define DIAG_PARTY_LINEID_SHIFT 1 #define DIAG_TYPE_SHIFT 28 #define DIAG_TYPE_MASK (3 << DIAG_TYPE_SHIFT) #define DIAG_PARTY_TYPE_MASK 0x30 #define DIAG_PARTY_TYPE_SHIFT 4 #define DIAG_PARTY_TYPE_SEND_SHIFT 6 #define DIAG_PARTY_TYPE_SEND_MASK (3 << DIAG_PARTY_TYPE_SEND_SHIFT) #define DIAG_TYPE_CMD_SHIFT 30 #define DIAG_TYPE_CMD_MASK (3 << DIAG_TYPE_CMD_SHIFT) #define DIAGS_LINE_SHIFT 31 #define DIAGS_LINE_MASK (1 << DIAGS_LINE_SHIFT) #define DIAG_DSL_CLIENT 0x0 #define DIAG_WLAN_CLIENT 0x1 #define DIAG_XTM_CLIENT 0x2 #define DIAG_DATA_DSL_ID 0x1 #define DIAG_DATA_XTM_ID 0x2 #define DIAG_DATA_WLAN_ID 0x4 #define DIAG_DATA_MASK 0x0E #define DIAG_DATA_LOG 0x02 #define DIAG_DATA_EYE 0x04 #define DIAG_DATA_LOG_TIME 0x08 #define DIAG_DATA_GUI_ID 0x10 #define DIAG_DATA_GDB_ID 0x20 #define DIAG_DATA_TCP_ID DIAG_PARTY_ID_MASK // <-- this flag is used when running LOG_CMD_COMMAND. Reusing DIAG_PARTY_ID_MASK bit which is not expected to be in use #define DIAG_LOCK_SESSION 0x40 #define DIAG_FORCE_DISCONNECT 0x80 #define DIAG_DATA_EX 0x80 #define DIAG_PARTY_ID_MASK_EX (DIAG_DATA_EX | DIAG_PARTY_ID_MASK) #define LOG_PARTY_SERVER_EX (DIAG_DATA_EX | LOG_PARTY_SERVER) #define DIAG_ACK_FRAME_ACK_MASK 0x000000FF #define DIAG_ACK_FRAME_RCV_SHIFT 8 #define DIAG_ACK_FRAME_RCV_MASK 0x0000FF00 #define DIAG_ACK_FRAME_RCV_PRESENT 0x00010000 #define DIAG_ACK_TIMEOUT -1 #define DIAG_ACK_LEN_INDICATION -1 #define LOG_CMD_DIAG_CONNECT_INFO 229 #define LOG_CMD_DISABLE_CLIENT 230 #define LOG_CMD_ENABLE_CLIENT 231 #define LOG_CMD_BONDING 232 #define LOG_CMD_MIB_GET1 233 #define LOG_CMD_CFG_PHY3 234 #define LOG_CMD_CFG_PHY2 235 #define LOG_CMD_GDB 236 #define LOG_CMD_PROXY 237 #define LOG_CMD_RETR 238 #define LOG_CMD_DEBUG 239 #define LOG_CMD_BERT_EX 240 #define LOG_CMD_CFG_PHY 241 #define LOG_CMD_RESET 242 #define LOG_CMD_SCRAMBLED_STRING 243 #define LOG_CMD_EYE_CFG 244 #define LOG_CMD_CONFIG_A 245 #define LOG_CMD_CONFIG_C 246 #define LOG_CMD_SWITCH_RJ11_PAIR 247 #define LOG_CMD_MIB_GET 248 #define LOG_CMD_LOG_STOP 249 #define LOG_CMD_PING_REQ 250 #define LOG_CMD_PING_RSP 251 #define LOG_CMD_DISCONNECT 252 #define LOG_CMD_STRING_DATA 253 #define LOG_CMD_TEST_DATA 254 #define LOG_CMD_CONNECT 255 typedef struct _LogProtoHeader { unsigned char logProtoId[2]; unsigned char logPartyId; unsigned char logCommmand; } LogProtoHeader; #define LOG_FILE_PORT 5100 #define LOG_FILE_PORT2 5099 #define GDB_PORT 5098 #define GDB_PORT_TCP 5097 #define LOG_MAX_BUF_SIZE 1400 #define LOG_MAX_DATA_SIZE (LOG_MAX_BUF_SIZE - sizeof(LogProtoHeader)) typedef struct { LogProtoHeader diagHdr; unsigned char diagData[LOG_MAX_DATA_SIZE]; } DiagProtoFrame; // These are for SkbDiagFrameData.target field #define DIAG_SKB_REROUTE_DATA 0 #define GDB_SKB_REROUTE_DATA 1 #define GUI_SKB_REROUTE_DATA 2 typedef struct { /* At the moment, we are restricted to have 4 bytes only, */ /* effectively, we are overwriting part of udpHdr. */ /* check usage in BcmAdslDiagLinux.c */ /* Order of frameLen and target fields matters */ /* ie. expecting frameLen to coincide with udpHdr.Lenght */ /* and target to coincide with udpHdr.Checksum */ unsigned short frameLen; unsigned short target; // 0 - diag, 1 - gdb, 2 - gui DiagProtoFrame diagFrame; } SkbDiagFrameData; #define DIAG_PROXY_TERMINATE 1 #define DIAG_PROXY_SET_FILTER 2 #define DIAG_PROXY_DNLOAD_LOGBINFILE 3 #define DIAG_PROXY_CMD_LINE 4 #define DIAG_BONDING_LDSTRDB 1 #define DIAG_DEBUG_CMD_READ_MEM 1 #define CMDID_READ_MEM_CHIPID 1 #define DIAG_DEBUG_CMD_SET_MEM 2 #define DIAG_DEBUG_CMD_RESET_CONNECTION 3 #define DIAG_DEBUG_CMD_RESET_PHY 4 #define DIAG_DEBUG_CMD_RESET_CHIP 5 #define DIAG_DEBUG_CMD_EXEC_FUNC 6 #define DIAG_DEBUG_CMD_EXEC_ADSL_FUNC 7 #define DIAG_DEBUG_CMD_WRITE_FILE 8 #define DIAG_DEBUG_CMD_G992P3_DEBUG 9 #define DIAG_DEBUG_CMD_G992P3_DIAG_MODE 10 #define DIAG_DEBUG_CMD_CLEAR_TIME 11 #define DIAG_DEBUG_CMD_PRINT_TIME 12 #define DIAG_DEBUG_CMD_LOG_SAMPLES 13 #define DIAG_DEBUG_CMD_PLAYBACK_STOP 14 #define DIAG_DEBUG_CMD_PLAYBACK_RESUME 15 #define DIAG_DEBUG_CMD_LOG_DATA 16 #define DIAG_DEBUG_CMD_LOG_AFTER_RESET 1 #define DIAG_DEBUG_CMD_CLEAREOC_LOOPBACK 17 #define DIAG_DEBUG_CMD_ANNEXM_CFG 18 #define DIAG_DEBUG_CMD_PRINT_STAT 21 #define DIAG_DEBUG_CMD_CLEAR_STAT 22 #define DIAG_DEBUG_CMD_SET_OEM 23 #define DIAG_DEBUG_CMD_SET_L2_TIMEOUT 24 #define DIAG_DEBUG_CMD_STAT_SAVE_LOCAL 25 #define STAT_SAVE_LOCAL_INIT 1 #define STAT_SAVE_LOCAL_ENABLE 2 #define STAT_SAVE_LOCAL_DISABLE 3 #define STAT_SAVE_LOCAL_WR2DIAG 4 /* Write saved statuses to Diags */ #define STAT_SAVE_LOCAL_ENABLECONTINOUS 5 /* Enable logging statues continously */ #define STAT_SAVE_LOCAL_STARTCONTINOUS 6 /* Start logging statues continously */ #define STAT_SAVE_LOCAL_STOPLOGGING 7 #define STAT_SAVE_LOCAL_STARTUNTILFULL 8 /* Start logging statues until buffer is full */ #define STAT_SAVE_LOCAL_STARTUNTILRETRAIN 9 /* Start logging statues until retrain */ #define STAT_SAVE_LOCAL_PAUSELOGGING 10 #define DIAG_DEBUG_CMD_IND_READ_6306 26 #define DIAG_DEBUG_CMD_IND_WRITE_6306 27 #define DIAG_DEBUG_CMD_READ_6306 28 #define DIAG_DEBUG_CMD_WRITE_6306 29 #define DIAG_DEBUG_CMD_START_BUF_TEST 30 #define DIAG_DEBUG_CMD_STOP_BUF_TEST 31 #define DIAG_DEBUG_CMD_SET_RAW_DATA_MODE 32 #define DIAG_DEBUG_CMD_SET_REGRESSION_LOCK 33 #define DIAG_DEBUG_CMD_CLR_REGRESSION_LOCK 34 #define DIAG_DEBUG_CMD_SYNC_CPE_TIME 35 #define DIAG_DEBUG_CMD_SWITCH_PHY_IMAGE 36 /* param1 = 0/1 -> bonding/single line image */ #define DIAG_DEBUG_CMD_SAVE_PREFERRED_LINE 37 /* Save DSL preferred line info in flash */ #define DIAG_DEBUG_CMD_MEDIASEARCH_CFG 38 #define DIAG_DEBUG_CMD_SET_EXTBONDINGDBG_PRINT 39 #define DIAG_DEBUG_CMD_DUMPBUF_CFG 40 #define DIAG_DEBUG_CMD_SET_XTM_LINKUP 41 /* param1 - lineId, param2 - tpsTc */ #define DIAG_DEBUG_CMD_SET_XTM_LINKDOWN 42 /* param1 - lineId */ #define DIAG_DEBUG_CMD_READ_AFEPLLMDIV 43 /* For 63138 */ #define DIAG_DEBUG_CMD_WRITE_AFEPLLMDIV 44 /* param1-pllch01_cfg.Bits.mdiv0, param2-pllch45_cfg.Bits.mdiv1 */ #define DIAG_DEBUG_CMD_CONFIG_BKUPIMAGE 45 /* param1-0/1 ==> Disable/Enable */ #define DIAG_DEBUG_CMD_READ_AFEPLLNDIV 46 /* For 63138 */ #define DIAG_DEBUG_CMD_WRITE_AFEPLLNDIV 47 /* param1-pll_ndiv.Bits.ndiv_int */ #define DIAG_DEBUG_CMD_PHY_TYPE_CFG 48 #define DIAG_DEBUG_CMD_MICRO_INTERRUPT 49 /* param1- number of mSecs */ #define DIAG_DEBUG_CMD_GFAST_TESTMODE 50 /* param1: 1-startRtxTestMode, 2-stopRtxTestMode, 3-startTpsTestMode, 4-stopTpsTestMode */ #define DIAG_DEBUG_CMD_SET_AFEPLLHOLDENABLEBITS 51 /* param1 - set/clear pllch45_cfg.Bits.hold_ch1, param2 - set/clear pllch45_cfg.Bits.enableb_ch1 */ #define DIAG_DEBUG_CMD_READ_AFEPLLMDEL 52 /* param1-pllch01_cfg.Bits.mdiv0/mdiv1, param2-pllch45_cfg.Bits.mdiv0/mdiv1 */ #define DIAG_DEBUG_CMD_TOGGLE_AFEPLLMDEL 53 /* param1-pllch01_cfg.Bits.mdiv0/mdiv1, param2-pllch45_cfg.Bits.mdiv0/mdiv1 */ #define DIAG_DEBUG_CMD_SILENT_MODE 54 /* silent mode on/off */ #define DIAG_DEBUG_CMD_OVERRIDE_2ND_AFEIDS 55 /* Override secondary afeIds */ #define DIAG_DEBUG_CMD_PHY_FROM_TMP 56 /* PHY load from /tmp on/off */ #define DIAG_DEBUG_CMD_DUMP_MEM 57 /* dump specified memory range to a file */ #define DIAG_DEBUG_CMD_SECT_OFF 58 /* offsets of the variables used in section dump */ #define DIAG_DEBUG_CMD_READ_AFEPLL_ChCfg 59 /* param1-chanId(0 - ch01, 1 - ch23, 2 - ch45) to read */ #define DIAG_DEBUG_CMD_WRITE_AFEPLL_ChCfg 60 /* param1-chanId(0 - ch01, 1 - ch23, 2 - ch45) to write; param2-value to be written */ typedef struct { unsigned short cmd; unsigned short cmdId; unsigned int param1; unsigned int param2; unsigned char diagData[1]; } DiagDebugData; #define DIAG_TEST_CMD_LOAD 101 #define DIAG_TEST_CMD_READ 102 #define DIAG_TEST_CMD_WRITE 103 #define DIAG_TEST_CMD_APPEND 104 #define DIAG_TEST_CMD_TEST_COMPLETE 105 #define DIAG_TEST_FILENAME_LEN 64 /* General kDiagGeneralMsgDbgDataPrint flags */ #define kDiagDbgDataSizeMask 0x00030000 #define kDiagDbgDataSize8 0x00000000 #define kDiagDbgDataSize16 0x00010000 #define kDiagDbgDataSize32 0x00020000 #define kDiagDbgDataSize64 0x00030000 #define kDiagDbgDataSignMask 0x00040000 #define kDiagDbgDataSigned 0x00040000 #define kDiagDbgDataUnsigned 0x00000000 #define kDiagDbgDataFormatMask 0x00080000 #define kDiagDbgDataFormatHex 0x00080000 #define kDiagDbgDataFormatDec 0x00000000 #define kDiagDbgDataQxShift 20 #define kDiagDbgDataQxMask (0xF << kDiagDbgDataQxShift) #define kDiagDbgDataQ0 0x00000000 #define kDiagDbgDataQ1 (1 << kDiagDbgDataQxShift) #define kDiagDbgDataQ4 (4 << kDiagDbgDataQxShift) #define kDiagDbgDataQ8 (8 << kDiagDbgDataQxShift) #define kDiagDbgDataQ12 (12 << kDiagDbgDataQxShift) #define kDiagDbgDataQ15 (0xF << kDiagDbgDataQxShift) typedef struct _prefixLengthStruct { unsigned short len; unsigned short lenComplement; } PrefixLenStruct; #define PREFIX_LEN_STRUCT_SIZE sizeof(PrefixLenStruct) typedef struct _cmdBufStruct { PrefixLenStruct prefixLen; LogProtoHeader diagHdr; char cmdData[LOG_MAX_DATA_SIZE]; } CmdBufStruct; typedef struct { unsigned short cmd; unsigned short cmdId; unsigned int offset; unsigned int len; unsigned int bufPtr; char fileName[DIAG_TEST_FILENAME_LEN]; } DiagTestData; typedef struct { unsigned int frStart; unsigned int frNum; } DiagLogRetrData; typedef struct { unsigned char macAddr[6]; char devName[32]; } DiagConnectInfo; /* shared DSL message codes */ #define kDiagReceivedEocCommand 262 #define kDiagStrPrintf 433 #define kDiagClearEocMsgLengthMask 0x0000FFFF #define kDiagClearEocMsgNumMask 0x00FF0000 #define kDiagClearEocMsgDataVolatileMask 0x01000000 #define kDiagClearEocMsgDataVolatile kDiagClearEocMsgDataVolatileMask #define kDiagClearEocMsgExtraSendComplete 0x02000000 /* Diags functions on CPE */ #ifndef WINNT #define VA_NARG( ...) VA_NARG_(__VA_ARGS__, 24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0) #define VA_NARG_(...) VA_ARG_N(__VA_ARGS__) #define VA_ARG_N(_1,_2,_3,_4,_5,_6,_7,_8,_9,_10,_11,_12,_13,_14,_15,_16,_17,_18,_19,_20,_21,_22,_23,_24,N,...) N #ifdef CONFIG_ARM64 #define ARG2(lo,hi) ((long)(hi) << 32) | (unsigned int)(lo) #define DiagStrPrintf(lId,clType,fmt,...) do { \ static const char fmt_str[] = fmt; \ __DiagStrPrintf(lId, clType, fmt_str, sizeof(fmt_str), (VA_NARG(__VA_ARGS__))+4, \ ARG2(kDiagReceivedEocCommand | (lId << DIAGS_LINE_SHIFT) | (clType << DIAG_TYPE_SHIFT), kDiagStrPrintf), \ ARG2(((((VA_NARG(__VA_ARGS__))+1) << 2) + sizeof(fmt_str)) | kDiagClearEocMsgDataVolatileMask, (VA_NARG(__VA_ARGS__))), \ ## __VA_ARGS__); \ } while (0) #define DiagStrPrintf1(lId,clType,fmt,...) do { \ int fmt_len = strlen(fmt) + 1; \ __DiagStrPrintf(lId, clType, fmt, fmt_len, (VA_NARG(__VA_ARGS__))+4, \ ARG2(kDiagReceivedEocCommand | (lId << DIAGS_LINE_SHIFT) | (clType << DIAG_TYPE_SHIFT), kDiagStrPrintf), \ ARG2(((((VA_NARG(__VA_ARGS__))+1) << 2) + sizeof(fmt_str)) | kDiagClearEocMsgDataVolatileMask, (VA_NARG(__VA_ARGS__))), \ ## __VA_ARGS__); \ } while (0) #else #define ARG2(lo,hi) lo, hi #define DiagStrPrintf(lId,clType,fmt,...) do { \ static const char fmt_str[] = fmt; \ __DiagStrPrintf(lId, clType, fmt_str, sizeof(fmt_str), (VA_NARG(__VA_ARGS__))+4, \ kDiagReceivedEocCommand | (lId << DIAGS_LINE_SHIFT) | (clType << DIAG_TYPE_SHIFT), \ kDiagStrPrintf, ((((VA_NARG(__VA_ARGS__))+1) << 2) + sizeof(fmt_str)) | kDiagClearEocMsgDataVolatileMask, \ (VA_NARG(__VA_ARGS__)), ## __VA_ARGS__); \ } while (0) #define DiagStrPrintf1(lId,clType,fmt,...) do { \ int fmt_len = strlen(fmt) + 1; \ __DiagStrPrintf(lId, clType, fmt, fmt_len, (VA_NARG(__VA_ARGS__))+4, \ kDiagReceivedEocCommand | (lId << DIAGS_LINE_SHIFT) | (clType << DIAG_TYPE_SHIFT), \ kDiagStrPrintf, ((((VA_NARG(__VA_ARGS__))+1) << 2) + fmt_len) | kDiagClearEocMsgDataVolatileMask, \ (VA_NARG(__VA_ARGS__)), ## __VA_ARGS__); \ } while (0) #endif extern void __DiagStrPrintf(unsigned int lineId, unsigned int clientType, const char *fmt, int fmtLen, int argNum, ...); extern void DiagWriteStatusInfo(unsigned int cmd, char *p, int n, char *p1, int n1); extern void DiagWriteStatusShort(unsigned int lineId, unsigned int clientType, unsigned int code, unsigned int value); extern void DiagWriteStatusLong(unsigned int lineId, unsigned int clientType, unsigned int msgId, void *ptr, unsigned int len, unsigned int flags); extern void DiagWriteFile(unsigned int lineId, unsigned int clientType, char *fname, void *ptr, unsigned int len); extern void DiagOpenFile(unsigned int lineId, unsigned int clientType, char *fname); extern void DiagDumpData(unsigned int lineId, unsigned int clientType, void *ptr, unsigned int len, unsigned int flags); extern void DiagWriteString(unsigned int lineId, unsigned int clientType, char *fmt, ...); extern void BcmDiagsMgrInit(void); extern void DiagWriteStringV(unsigned int lineId, unsigned int clientType, const char *fmt, void *ap); void BcmDiagsMgrRegisterClient(unsigned int clientType, void *pCallback); void BcmDiagsMgrDeRegisterClient(unsigned int clientType); #endif /* WINNT */ #if defined(__cplusplus) } #endif #endif /* _DIAGDEF_H_ */