/* Copyright (c) 2015 Broadcom Corporation All Rights Reserved <:label-BRCM:2015:DUAL/GPL:standard This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License, version 2, as published by the Free Software Foundation (the "GPL"). This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. :> */ #include "ru.h" #if RU_INCLUDE_FIELD_DB /****************************************************************************** * Field: LPORT_MDIO_CMD_RESERVED0 ******************************************************************************/ const ru_field_rec LPORT_MDIO_CMD_RESERVED0_FIELD = { "RESERVED0", #if RU_INCLUDE_DESC "", "", #endif LPORT_MDIO_CMD_RESERVED0_FIELD_MASK, 0, LPORT_MDIO_CMD_RESERVED0_FIELD_WIDTH, LPORT_MDIO_CMD_RESERVED0_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CMD_START_BUSY ******************************************************************************/ const ru_field_rec LPORT_MDIO_CMD_START_BUSY_FIELD = { "START_BUSY", #if RU_INCLUDE_DESC "", "START_BUSY, Self-clearing, CPU writes this bit to 1 in order to initiate MDIO transaction. When transaction completes hardware will clear this bit.", #endif LPORT_MDIO_CMD_START_BUSY_FIELD_MASK, 0, LPORT_MDIO_CMD_START_BUSY_FIELD_WIDTH, LPORT_MDIO_CMD_START_BUSY_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CMD_FAIL ******************************************************************************/ const ru_field_rec LPORT_MDIO_CMD_FAIL_FIELD = { "FAIL", #if RU_INCLUDE_DESC "", "This bit is set when PHY does not reply to READ command (PHY does not drive 0 on bus turnaround).", #endif LPORT_MDIO_CMD_FAIL_FIELD_MASK, 0, LPORT_MDIO_CMD_FAIL_FIELD_WIDTH, LPORT_MDIO_CMD_FAIL_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CMD_OP_CODE ******************************************************************************/ const ru_field_rec LPORT_MDIO_CMD_OP_CODE_FIELD = { "OP_CODE", #if RU_INCLUDE_DESC "", "MDIO command that is OP[1:0]:\n" "00 - Address for clause 45.\n" "01 - Write.\n" "10 - Read increment for clause 45.\n" "11 - Read for clause 45.\n" "10 - Read for clause 22.\n", #endif LPORT_MDIO_CMD_OP_CODE_FIELD_MASK, 0, LPORT_MDIO_CMD_OP_CODE_FIELD_WIDTH, LPORT_MDIO_CMD_OP_CODE_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CMD_PHY_PRT_ADDR ******************************************************************************/ const ru_field_rec LPORT_MDIO_CMD_PHY_PRT_ADDR_FIELD = { "PHY_PRT_ADDR", #if RU_INCLUDE_DESC "", "PHY address[4:0] for clause 22, Port address[4:0] for Clause 45.", #endif LPORT_MDIO_CMD_PHY_PRT_ADDR_FIELD_MASK, 0, LPORT_MDIO_CMD_PHY_PRT_ADDR_FIELD_WIDTH, LPORT_MDIO_CMD_PHY_PRT_ADDR_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CMD_REG_DEV_ADDR ******************************************************************************/ const ru_field_rec LPORT_MDIO_CMD_REG_DEV_ADDR_FIELD = { "REG_DEV_ADDR", #if RU_INCLUDE_DESC "", "Register address[4:0] for clause 22, Device address[4:0] for Clause 45.", #endif LPORT_MDIO_CMD_REG_DEV_ADDR_FIELD_MASK, 0, LPORT_MDIO_CMD_REG_DEV_ADDR_FIELD_WIDTH, LPORT_MDIO_CMD_REG_DEV_ADDR_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CMD_DATA_ADDR ******************************************************************************/ const ru_field_rec LPORT_MDIO_CMD_DATA_ADDR_FIELD = { "DATA_ADDR", #if RU_INCLUDE_DESC "", "MDIO Read/Write data[15:0], clause 22 and 45 or MDIO address[15:0] for clause 45\".", #endif LPORT_MDIO_CMD_DATA_ADDR_FIELD_MASK, 0, LPORT_MDIO_CMD_DATA_ADDR_FIELD_WIDTH, LPORT_MDIO_CMD_DATA_ADDR_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CFG_RESERVED0 ******************************************************************************/ const ru_field_rec LPORT_MDIO_CFG_RESERVED0_FIELD = { "RESERVED0", #if RU_INCLUDE_DESC "", "", #endif LPORT_MDIO_CFG_RESERVED0_FIELD_MASK, 0, LPORT_MDIO_CFG_RESERVED0_FIELD_WIDTH, LPORT_MDIO_CFG_RESERVED0_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CFG_SUPRESS_PREAMBLE ******************************************************************************/ const ru_field_rec LPORT_MDIO_CFG_SUPRESS_PREAMBLE_FIELD = { "SUPRESS_PREAMBLE", #if RU_INCLUDE_DESC "", "When this bit set, preamble (32 consectutive 1's) is suppressed for MDIO transaction that is MDIO transaction starts with ST.", #endif LPORT_MDIO_CFG_SUPRESS_PREAMBLE_FIELD_MASK, 0, LPORT_MDIO_CFG_SUPRESS_PREAMBLE_FIELD_WIDTH, LPORT_MDIO_CFG_SUPRESS_PREAMBLE_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CFG_RESERVED1 ******************************************************************************/ const ru_field_rec LPORT_MDIO_CFG_RESERVED1_FIELD = { "RESERVED1", #if RU_INCLUDE_DESC "", "", #endif LPORT_MDIO_CFG_RESERVED1_FIELD_MASK, 0, LPORT_MDIO_CFG_RESERVED1_FIELD_WIDTH, LPORT_MDIO_CFG_RESERVED1_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CFG_MDIO_CLK_DIVIDER ******************************************************************************/ const ru_field_rec LPORT_MDIO_CFG_MDIO_CLK_DIVIDER_FIELD = { "MDIO_CLK_DIVIDER", #if RU_INCLUDE_DESC "", "MDIO clock divider[5:0], Reference clock (typically 250 MHz) is divided by 2x(MDIO_CLK_DIVIDER+1) to generate MDIO clock(MDC).", #endif LPORT_MDIO_CFG_MDIO_CLK_DIVIDER_FIELD_MASK, 0, LPORT_MDIO_CFG_MDIO_CLK_DIVIDER_FIELD_WIDTH, LPORT_MDIO_CFG_MDIO_CLK_DIVIDER_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CFG_RESERVED2 ******************************************************************************/ const ru_field_rec LPORT_MDIO_CFG_RESERVED2_FIELD = { "RESERVED2", #if RU_INCLUDE_DESC "", "", #endif LPORT_MDIO_CFG_RESERVED2_FIELD_MASK, 0, LPORT_MDIO_CFG_RESERVED2_FIELD_WIDTH, LPORT_MDIO_CFG_RESERVED2_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; /****************************************************************************** * Field: LPORT_MDIO_CFG_MDIO_CLAUSE ******************************************************************************/ const ru_field_rec LPORT_MDIO_CFG_MDIO_CLAUSE_FIELD = { "MDIO_CLAUSE", #if RU_INCLUDE_DESC "", "0: Clause 45.\n" "1: Clause 22.", #endif LPORT_MDIO_CFG_MDIO_CLAUSE_FIELD_MASK, 0, LPORT_MDIO_CFG_MDIO_CLAUSE_FIELD_WIDTH, LPORT_MDIO_CFG_MDIO_CLAUSE_FIELD_SHIFT, #if RU_INCLUDE_ACCESS ru_access_rw #endif }; #endif /* RU_INCLUDE_FIELD_DB */ /****************************************************************************** * Register: LPORT_MDIO_CMD ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *LPORT_MDIO_CMD_FIELDS[] = { &LPORT_MDIO_CMD_RESERVED0_FIELD, &LPORT_MDIO_CMD_START_BUSY_FIELD, &LPORT_MDIO_CMD_FAIL_FIELD, &LPORT_MDIO_CMD_OP_CODE_FIELD, &LPORT_MDIO_CMD_PHY_PRT_ADDR_FIELD, &LPORT_MDIO_CMD_REG_DEV_ADDR_FIELD, &LPORT_MDIO_CMD_DATA_ADDR_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec LPORT_MDIO_CMD_REG = { "CMD", #if RU_INCLUDE_DESC "MDIO Command Register", "", #endif LPORT_MDIO_CMD_REG_OFFSET, 0, 0, 269, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 7, LPORT_MDIO_CMD_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Register: LPORT_MDIO_CFG ******************************************************************************/ #if RU_INCLUDE_FIELD_DB static const ru_field_rec *LPORT_MDIO_CFG_FIELDS[] = { &LPORT_MDIO_CFG_RESERVED0_FIELD, &LPORT_MDIO_CFG_SUPRESS_PREAMBLE_FIELD, &LPORT_MDIO_CFG_RESERVED1_FIELD, &LPORT_MDIO_CFG_MDIO_CLK_DIVIDER_FIELD, &LPORT_MDIO_CFG_RESERVED2_FIELD, &LPORT_MDIO_CFG_MDIO_CLAUSE_FIELD, }; #endif /* RU_INCLUDE_FIELD_DB */ const ru_reg_rec LPORT_MDIO_CFG_REG = { "CFG", #if RU_INCLUDE_DESC "MDIO Configuration Register", "", #endif LPORT_MDIO_CFG_REG_OFFSET, 0, 0, 270, #if RU_INCLUDE_ACCESS ru_access_rw, #endif #if RU_INCLUDE_FIELD_DB 6, LPORT_MDIO_CFG_FIELDS, #endif /* RU_INCLUDE_FIELD_DB */ ru_reg_size_32 }; /****************************************************************************** * Block: LPORT_MDIO ******************************************************************************/ static const ru_reg_rec *LPORT_MDIO_REGS[] = { &LPORT_MDIO_CMD_REG, &LPORT_MDIO_CFG_REG, }; unsigned long LPORT_MDIO_ADDRS[] = { 0x8013d400, }; const ru_block_rec LPORT_MDIO_BLOCK = { "LPORT_MDIO", LPORT_MDIO_ADDRS, 1, 2, LPORT_MDIO_REGS }; /* End of file BCM6858_A0LPORT_MDIO.c */