/*
   Copyright (c) 2015 Broadcom
   All Rights Reserved

    <:label-BRCM:2015:DUAL/GPL:standard

    Unless you and Broadcom execute a separate written software license
    agreement governing use of this software, this software is licensed
    to you under the terms of the GNU General Public License version 2
    (the "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
    with the following added to such license:

       As a special exception, the copyright holders of this software give
       you permission to link this software with independent modules, and
       to copy and distribute the resulting executable under terms of your
       choice, provided that you also meet, for each linked independent
       module, the terms and conditions of the license of that module.
       An independent module is a module which is not derived from this
       software.  The special exception does not apply to any modifications
       of the software.

    Not withstanding the above, under no circumstances may you combine
    this software in any way with any other Broadcom software provided
    under a license other than the GPL, without Broadcom's express prior
    written consent.

:>
*/

#include "ru.h"

#if RU_INCLUDE_FIELD_DB
/******************************************************************************
 * Field: NATC_INDIR_C_INDIR_ADDR_REG_RESERVED0
 ******************************************************************************/
const ru_field_rec NATC_INDIR_C_INDIR_ADDR_REG_RESERVED0_FIELD =
{
    "RESERVED0",
#if RU_INCLUDE_DESC
    "",
    "",
#endif
    NATC_INDIR_C_INDIR_ADDR_REG_RESERVED0_FIELD_MASK,
    0,
    NATC_INDIR_C_INDIR_ADDR_REG_RESERVED0_FIELD_WIDTH,
    NATC_INDIR_C_INDIR_ADDR_REG_RESERVED0_FIELD_SHIFT,
#if RU_INCLUDE_ACCESS
    ru_access_rw
#endif
};

/******************************************************************************
 * Field: NATC_INDIR_C_INDIR_ADDR_REG_W_R
 ******************************************************************************/
const ru_field_rec NATC_INDIR_C_INDIR_ADDR_REG_W_R_FIELD =
{
    "W_R",
#if RU_INCLUDE_DESC
    "",
    "NAT Cache Memory and Statics Memory Transaction."
    "1 : NAT Cache Memory and Statics Memory Write."
    "0 : NAT Cache Memory and Statics Memory Read.",
#endif
    NATC_INDIR_C_INDIR_ADDR_REG_W_R_FIELD_MASK,
    0,
    NATC_INDIR_C_INDIR_ADDR_REG_W_R_FIELD_WIDTH,
    NATC_INDIR_C_INDIR_ADDR_REG_W_R_FIELD_SHIFT,
#if RU_INCLUDE_ACCESS
    ru_access_rw
#endif
};

/******************************************************************************
 * Field: NATC_INDIR_C_INDIR_ADDR_REG_NATC_ENTRY
 ******************************************************************************/
const ru_field_rec NATC_INDIR_C_INDIR_ADDR_REG_NATC_ENTRY_FIELD =
{
    "NATC_ENTRY",
#if RU_INCLUDE_DESC
    "",
    "NAT Cache Entry number.",
#endif
    NATC_INDIR_C_INDIR_ADDR_REG_NATC_ENTRY_FIELD_MASK,
    0,
    NATC_INDIR_C_INDIR_ADDR_REG_NATC_ENTRY_FIELD_WIDTH,
    NATC_INDIR_C_INDIR_ADDR_REG_NATC_ENTRY_FIELD_SHIFT,
#if RU_INCLUDE_ACCESS
    ru_access_rw
#endif
};

/******************************************************************************
 * Field: NATC_INDIR_C_INDIR_DATA_REG_DATA
 ******************************************************************************/
const ru_field_rec NATC_INDIR_C_INDIR_DATA_REG_DATA_FIELD =
{
    "DATA",
#if RU_INCLUDE_DESC
    "",
    "Indirect register access data register, bits[31:0]."
    "-------------------------------------------------------"
    "For NAT Cache nd Statics Memory write operation,"
    "first, write all the data to Indirect Data Registers[N-1:0],"
    "N is number of words including key, result, hit count and byte count."
    "Indirect Data Register[1:0] are for Statics Memory."
    "Indirect Data register[0] is for hit count."
    "Indirect Data Register[1] is for byte count."
    "indirect Data register [N-1:2] are for NAT Cache Memory (key and result), key is first,"
    "followed by result, followed by nat_tbl"
    "then followed by a write to Indirect Address Register to set up"
    "NAT Cache Entry Number and W_R bit to 1, this will initiate the write operation."
    "--------------------------------------------------------"
    "For NAT Cache Memory and statics Memory read operation,"
    "first, write to Indirect Address Register to set up"
    "NAT Cache Entry Number and W_R bit to 0, this will initiate the read operation."
    "the read data from NAT Cache Memory and statics Memory "
    "will be loaded into Indirect Data Registers[N-1:0]."
    "then followed by read from Indirect Data Registers[N-1:0] for all data.",
#endif
    NATC_INDIR_C_INDIR_DATA_REG_DATA_FIELD_MASK,
    0,
    NATC_INDIR_C_INDIR_DATA_REG_DATA_FIELD_WIDTH,
    NATC_INDIR_C_INDIR_DATA_REG_DATA_FIELD_SHIFT,
#if RU_INCLUDE_ACCESS
    ru_access_rw
#endif
};

#endif /* RU_INCLUDE_FIELD_DB */

/******************************************************************************
 * Register: NATC_INDIR_C_INDIR_ADDR_REG
 ******************************************************************************/
#if RU_INCLUDE_FIELD_DB
static const ru_field_rec *NATC_INDIR_C_INDIR_ADDR_REG_FIELDS[] =
{
    &NATC_INDIR_C_INDIR_ADDR_REG_RESERVED0_FIELD,
    &NATC_INDIR_C_INDIR_ADDR_REG_W_R_FIELD,
    &NATC_INDIR_C_INDIR_ADDR_REG_NATC_ENTRY_FIELD,
};

#endif /* RU_INCLUDE_FIELD_DB */

const ru_reg_rec NATC_INDIR_C_INDIR_ADDR_REG_REG = 
{
    "C_INDIR_ADDR_REG",
#if RU_INCLUDE_DESC
    "NATC Indirect Address Register",
    "",
#endif
    NATC_INDIR_C_INDIR_ADDR_REG_REG_OFFSET,
    0,
    0,
    833,
#if RU_INCLUDE_ACCESS
    ru_access_rw,
#endif
#if RU_INCLUDE_FIELD_DB
    3,
    NATC_INDIR_C_INDIR_ADDR_REG_FIELDS
#endif /* RU_INCLUDE_FIELD_DB */
};

/******************************************************************************
 * Register: NATC_INDIR_C_INDIR_DATA_REG
 ******************************************************************************/
#if RU_INCLUDE_FIELD_DB
static const ru_field_rec *NATC_INDIR_C_INDIR_DATA_REG_FIELDS[] =
{
    &NATC_INDIR_C_INDIR_DATA_REG_DATA_FIELD,
};

#endif /* RU_INCLUDE_FIELD_DB */

const ru_reg_rec NATC_INDIR_C_INDIR_DATA_REG_REG = 
{
    "C_INDIR_DATA_REG",
#if RU_INCLUDE_DESC
    "MATC Indirect Data Register",
    "",
#endif
    NATC_INDIR_C_INDIR_DATA_REG_REG_OFFSET,
    NATC_INDIR_C_INDIR_DATA_REG_REG_RAM_CNT,
    4,
    834,
#if RU_INCLUDE_ACCESS
    ru_access_rw,
#endif
#if RU_INCLUDE_FIELD_DB
    1,
    NATC_INDIR_C_INDIR_DATA_REG_FIELDS
#endif /* RU_INCLUDE_FIELD_DB */
};

/******************************************************************************
 * Block: NATC_INDIR
 ******************************************************************************/
static const ru_reg_rec *NATC_INDIR_REGS[] =
{
    &NATC_INDIR_C_INDIR_ADDR_REG_REG,
    &NATC_INDIR_C_INDIR_DATA_REG_REG,
};

unsigned long NATC_INDIR_ADDRS[] =
{
    0x82e50400,
};

const ru_block_rec NATC_INDIR_BLOCK = 
{
    "NATC_INDIR",
    NATC_INDIR_ADDRS,
    1,
    2,
    NATC_INDIR_REGS
};

/* End of file XRDP_NATC_INDIR.c */