/dts-v1/; /* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include "qcom-ipq5018.dtsi" / { #address-cells = <0x2>; #size-cells = <0x2>; model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1"; compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018"; interrupt-parent = <&intc>; aliases { sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ serial0 = &blsp1_uart1; serial1 = &blsp1_uart2; ethernet0 = "/soc/dp1"; ethernet1 = "/soc/dp2"; }; chosen { bootargs = "console=ttyMSM0,115200,n8 rw init=/init"; #ifdef __IPQ_MEM_PROFILE_256_MB__ bootargs-append = " swiotlb=1"; #else bootargs-append = " swiotlb=1 coherent_pool=2M"; #endif stdout-path = "serial0"; }; reserved-memory { #ifdef __IPQ_MEM_PROFILE_256_MB__ /* 256 MB Profile * +==========+==============+=========================+ * | | | | * | Region | Start Offset | Size | * | | | | * +----------+--------------+-------------------------+ * | NSS | 0x40000000 | 8MB | * +----------+--------------+-------------------------+ * | Linux | 0x40800000 | Depends on total memory | * +----------+--------------+-------------------------+ * | uboot | 0x4A600000 | 4MB | * +----------+--------------+-------------------------+ * | SBL | 0x4AA00000 | 1MB | * +----------+--------------+-------------------------+ * | smem | 0x4AB00000 | 1MB | * +----------+--------------+-------------------------+ * | TZ | 0x4AC00000 | 4MB | * +----------+--------------+-------------------------+ * | Q6 | | | * | code/ | 0x4B000000 | 20MB | * | data | | | * +----------+--------------+-------------------------+ * | IPQ5018 | | | * | data | 0x4C400000 | 13MB | * +----------+--------------+-------------------------+ * | IPQ5018 | | | * | M3 Dump | 0x4D100000 | 1MB | * +----------+--------------+-------------------------+ * | IPQ5018 | | | * | QDSS | 0x4D200000 | 1MB | * +----------+--------------+-------------------------+ * | QCN6122_1| | | * | data | 0x4D300000 | 15MB | * +----------+--------------+-------------------------+ * | QCN6122_1| | | * | M3 Dump | 0x4E200000 | 1MB | * +----------+--------------+-------------------------+ * | QCN6122_1| | | * | QDSS | 0x4E300000 | 1MB | * +----------+--------------+-------------------------+ * | QCN6122_2| | | * | data | 0x4E400000 | 15MB | * +----------+--------------+-------------------------+ * | QCN6122_2| | | * | M3 Dump | 0x4F300000 | 1MB | * +----------+--------------+-------------------------+ * | QCN6122_2| | | * | QDSS | 0x4F400000 | 1MB | * +----------+--------------+-------------------------+ * | | * | Rest of the memory for Linux | * | | * +===================================================+ */ q6_mem_regions: q6_mem_regions@4B000000 { no-map; reg = <0x0 0x4B000000 0x0 0x4500000>; }; q6_code_data: q6_code_data@4B000000 { no-map; reg = <0x0 0x4B000000 0x0 0x1400000>; }; q6_ipq5018_data: q6_ipq5018_data@4C400000 { no-map; reg = <0x0 0x4C400000 0x0 0xD00000>; }; m3_dump: m3_dump@4D100000 { no-map; reg = <0x0 0x4D100000 0x0 0x100000>; }; q6_etr_region: q6_etr_dump@4D200000 { no-map; reg = <0x0 0x4D200000 0x0 0x100000>; }; q6_qcn6122_data1: q6_qcn6122_data1@4D300000 { no-map; reg = <0x0 0x4D300000 0x0 0xF00000>; }; m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 { no-map; reg = <0x0 0x4E200000 0x0 0x100000>; }; q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 { no-map; reg = <0x0 0x4E300000 0x0 0x100000>; }; q6_qcn6122_data2: q6_qcn6122_data2@4E400000 { no-map; reg = <0x0 0x4E400000 0x0 0xF00000>; }; m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 { no-map; reg = <0x0 0x4F300000 0x0 0x100000>; }; q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 { no-map; reg = <0x0 0x4F400000 0x0 0x100000>; }; #else /* 512MB/1GB Profiles * +==========+==============+=========================+ * | | | | * | Region | Start Offset | Size | * | | | | * +----------+--------------+-------------------------+ * | NSS | 0x40000000 | 16MB | * +----------+--------------+-------------------------+ * | Linux | 0x41000000 | Depends on total memory | * +----------+--------------+-------------------------+ * | uboot | 0x4A600000 | 4MB | * +----------+--------------+-------------------------+ * | SBL | 0x4AA00000 | 1MB | * +----------+--------------+-------------------------+ * | smem | 0x4AB00000 | 1MB | * +----------+--------------+-------------------------+ * | TZ | 0x4AC00000 | 4MB | * +----------+--------------+-------------------------+ * | Q6 | | | * | code/ | 0x4B000000 | 20MB | * | data | | | * +----------+--------------+-------------------------+ * | IPQ5018 | | | * | data | 0x4C400000 | 14MB | * +----------+--------------+-------------------------+ * | IPQ5018 | | | * | M3 Dump | 0x4D200000 | 1MB | * +----------+--------------+-------------------------+ * | IPQ5018 | | | * | QDSS | 0x4D300000 | 1MB | * +----------+--------------+-------------------------+ * | IPQ5018 | | | * | Caldb | 0x4D400000 | 2MB | * +----------+--------------+-------------------------+ * | QCN6122_1| | | * | data | 0x4D600000 | 16MB | * +----------+--------------+-------------------------+ * | QCN6122_1| | | * | M3 Dump | 0x4E600000 | 1MB | * +----------+--------------+-------------------------+ * | QCN6122_1| | | * | QDSS | 0x4E700000 | 1MB | * +----------+--------------+-------------------------+ * | QCN6122_1| | | * | Caldb | 0x4E800000 | 5MB | * +----------+--------------+-------------------------+ * | QCN6122_2| | | * | data | 0x4ED00000 | 16MB | * +----------+--------------+-------------------------+ * | QCN6122_2| | | * | M3 Dump | 0x4FD00000 | 1MB | * +----------+--------------+-------------------------+ * | QCN6122_2| | | * | QDSS | 0x4FE00000 | 1MB | * +----------+--------------+-------------------------+ * | QCN6122_2| | | * | Caldb | 0x4FF00000 | 5MB | * +----------+--------------+-------------------------+ * | | * | Rest of the memory for Linux | * | | * +===================================================+ */ q6_mem_regions: q6_mem_regions@4B000000 { no-map; reg = <0x0 0x4B000000 0x0 0x5400000>; }; q6_code_data: q6_code_data@4B000000 { no-map; reg = <0x0 0x4B000000 0x0 01400000>; }; q6_ipq5018_data: q6_ipq5018_data@4C400000 { no-map; reg = <0x0 0x4C400000 0x0 0xE00000>; }; m3_dump: m3_dump@4D200000 { no-map; reg = <0x0 0x4D200000 0x0 0x100000>; }; q6_etr_region: q6_etr_dump@4D300000 { no-map; reg = <0x0 0x4D300000 0x0 0x100000>; }; q6_caldb_region: q6_caldb_region@4D400000 { no-map; reg = <0x0 0x4D400000 0x0 0x200000>; }; q6_qcn6122_data1: q6_qcn6122_data1@4D600000 { no-map; reg = <0x0 0x4D600000 0x0 0x1000000>; }; m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 { no-map; reg = <0x0 0x4E600000 0x0 0x100000>; }; q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 { no-map; reg = <0x0 0x4E700000 0x0 0x100000>; }; q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 { no-map; reg = <0x0 0x4E800000 0x0 0x500000>; }; q6_qcn6122_data2: q6_qcn6122_data2@4E900000 { no-map; reg = <0x0 0x4ED00000 0x0 0x1000000>; }; m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 { no-map; reg = <0x0 0x4FD00000 0x0 0x100000>; }; q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 { no-map; reg = <0x0 0x4FE00000 0x0 0x100000>; }; q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 { no-map; reg = <0x0 0x4FF00000 0x0 0x500000>; }; #endif }; soc { serial@78af000 { status = "ok"; }; blsp1_uart2: serial@78b0000 { pinctrl-0 = <&blsp1_uart_pins>; pinctrl-names = "default"; }; qpic_bam: dma@7984000{ status = "ok"; }; nand: qpic-nand@79b0000 { pinctrl-0 = <&qspi_nand_pins>; pinctrl-names = "default"; status = "ok"; }; spi_0: spi@78b5000 { /* BLSP1 QUP0 */ pinctrl-0 = <&blsp0_spi_pins>; pinctrl-names = "default"; cs-select = <0>; status = "ok"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; compatible = "n25q128a11"; linux,modalias = "m25p80", "n25q128a11"; spi-max-frequency = <50000000>; use-default-sizes; }; }; mdio0: mdio@88000 { status = "ok"; ethernet-phy@0 { reg = <7>; }; }; mdio1: mdio@90000 { status = "ok"; #address-cells = <1>; #size-cells = <0>; pinctrl-0 = <&mdio1_pins>; pinctrl-names = "default"; phy-reset-gpio = <&tlmm 39 0>; ethernet-phy@0 { reg = <28>; }; }; ess-instance { num_devices = <0x1>; #address-cells = <1>; #size-cells = <0>; ess-switch@0x39c00000 { switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/ cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/ qcom,port_phyinfo { port@0 { port_id = <1>; phy_address = <7>; mdiobus = <&mdio0>; }; port@1 { port_id = <2>; phy_address = <0x1c>; mdiobus = <&mdio1>; port_mac_sel = "QGMAC_PORT"; }; }; led_source@0 { source = <0>; mode = "normal"; speed = "all"; blink_en = "enable"; active = "high"; }; }; }; dp1 { device_type = "network"; compatible = "qcom,nss-dp"; clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>; clock-names = "nss-snoc-gmac-axi-clk"; qcom,id = <1>; reg = <0x39C00000 0x10000>; interrupts = ; qcom,mactype = <2>; qcom,link-poll = <1>; qcom,phy-mdio-addr = <7>; mdio-bus = <&mdio0>; local-mac-address = [000000000000]; phy-mode = "sgmii"; }; dp2 { device_type = "network"; compatible = "qcom,nss-dp"; clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>; clock-names = "nss-snoc-gmac-axi-clk"; qcom,id = <2>; reg = <0x39D00000 0x10000>; interrupts = ; qcom,mactype = <2>; qcom,link-poll = <1>; qcom,phy-mdio-addr = <28>; mdio-bus = <&mdio1>; local-mac-address = [000000000000]; phy-mode = "sgmii"; }; qcom,test@0 { status = "ok"; }; lpass: lpass@0xA000000{ status = "disabled"; }; pcm: pcm@0xA3C0000{ pinctrl-0 = <&audio_pins>; pinctrl-names = "default"; status = "disabled"; }; pcm_lb: pcm_lb@0 { status = "disabled"; }; }; thermal-zones { status = "ok"; }; }; &tlmm { pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>; pinctrl-names = "default"; blsp0_uart_pins: uart_pins { blsp0_uart_rx_tx { pins = "gpio20", "gpio21"; function = "blsp0_uart0"; bias-disable; }; }; blsp1_uart_pins: blsp1_uart_pins { blsp1_uart_rx_tx { pins = "gpio23", "gpio25", "gpio24", "gpio26"; function = "blsp1_uart2"; bias-disable; }; }; blsp0_spi_pins: blsp0_spi_pins { mux { pins = "gpio10", "gpio11", "gpio12", "gpio13"; function = "blsp0_spi"; drive-strength = <2>; bias-disable; }; }; qspi_nand_pins: qspi_nand_pins { qspi_clock { pins = "gpio9"; function = "qspi_clk"; drive-strength = <8>; bias-disable; }; qspi_cs { pins = "gpio8"; function = "qspi_cs"; drive-strength = <8>; bias-disable; }; qspi_data_0 { pins = "gpio7"; function = "qspi0"; drive-strength = <8>; bias-disable; }; qspi_data_1 { pins = "gpio6"; function = "qspi1"; drive-strength = <8>; bias-disable; }; qspi_data_2 { pins = "gpio5"; function = "qspi2"; drive-strength = <8>; bias-disable; }; qspi_data_3 { pins = "gpio4"; function = "qspi3"; drive-strength = <8>; bias-disable; }; }; mdio1_pins: mdio_pinmux { mux_0 { pins = "gpio36"; function = "mdc"; drive-strength = <8>; bias-pull-up; }; mux_1 { pins = "gpio37"; function = "mdio"; drive-strength = <8>; bias-pull-up; }; }; phy_led_pins: phy_led_pins { gephy_led_pin { pins = "gpio46"; function = "led0"; drive-strength = <8>; bias-pull-down; }; }; i2c_pins: i2c_pins { i2c_scl { pins = "gpio25"; function = "blsp2_i2c1"; drive-strength = <8>; bias-disable; }; i2c_sda { pins = "gpio26"; function = "blsp2_i2c1"; drive-strength = <8>; bias-disable; }; }; button_pins: button_pins { wps_button { pins = "gpio38"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; }; audio_pins: audio_pinmux { mux_1 { pins = "gpio24"; function = "audio_rxbclk"; drive-strength = <8>; bias-pull-down; }; mux_2 { pins = "gpio25"; function = "audio_rxfsync"; drive-strength = <8>; bias-pull-down; }; mux_3 { pins = "gpio26"; function = "audio_rxd"; drive-strength = <8>; bias-pull-down; }; mux_4 { pins = "gpio27"; function = "audio_txmclk"; drive-strength = <8>; bias-pull-down; }; mux_5 { pins = "gpio28"; function = "audio_txbclk"; drive-strength = <8>; bias-pull-down; }; mux_6 { pins = "gpio29"; function = "audio_txfsync"; drive-strength = <8>; bias-pull-down; }; mux_7 { pins = "gpio30"; function = "audio_txd"; drive-strength = <8>; bias-pull-down; }; }; }; &soc { gpio_keys { compatible = "gpio-keys"; pinctrl-0 = <&button_pins>; pinctrl-names = "default"; button@1 { label = "wps"; linux,code = ; gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; linux,input-type = <1>; debounce-interval = <60>; }; }; }; &usb3 { status = "ok"; device-power-gpio = <&tlmm 24 1>; }; &eud { status = "ok"; }; &pcie_x1 { status = "disabled"; perst-gpio = <&tlmm 18 1>; }; &pcie_x2 { status = "disabled"; perst-gpio = <&tlmm 15 1>; }; &dwc_0 { /delete-property/ #phy-cells; /delete-property/ phys; /delete-property/ phy-names; }; &hs_m31phy_0 { status = "ok"; }; &pcie_x1phy { status = "disabled"; }; &pcie_x2phy { status = "disabled"; }; &pcie_x1_rp { status = "disabled"; #address-cells = <5>; #size-cells = <0>; mhi_0: qcom,mhi@0 { reg = <0 0 0 0 0 >; }; }; &pcie_x2_rp { status = "disabled"; #address-cells = <5>; #size-cells = <0>; mhi_1: qcom,mhi@1 { reg = <0 0 0 0 0 >; }; }; &qfprom { status = "ok"; }; &tsens { status = "ok"; }; &qcom_q6v5_wcss { qcom,multipd_arch; memory-region = <&q6_mem_regions>; qcom,share_bootargs; qcom,bootargs_smem = <507>; boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>, <0x2 0x4 0x2 0x12 0x0 0x0>; /* IPQ5018 */ q6v5_wcss_userpd1 { m3_firmware = "IPQ5018/m3_fw.mdt"; interrupts-extended = <&wcss_smp2p_in 8 0>, <&wcss_smp2p_in 9 0>, <&wcss_smp2p_in 12 0>, <&wcss_smp2p_in 11 0>; interrupt-names ="fatal", "ready", "spawn_ack", "stop-ack"; qcom,smem-states = <&wcss_smp2p_out 8>, <&wcss_smp2p_out 9>, <&wcss_smp2p_out 10>; qcom,smem-state-names = "shutdown", "stop", "spawn"; qca,asid = <1>; qca,auto-restart; qca,int_radio; #ifdef __IPQ_MEM_PROFILE_256_MB__ memory-region = <&q6_ipq5018_data>, <&m3_dump>, <&q6_etr_region>; #else memory-region = <&q6_ipq5018_data>, <&m3_dump>, <&q6_etr_region>, <&q6_caldb_region>; #endif }; /* QCN6122 6G */ q6v5_wcss_userpd2 { m3_firmware = "qcn6122/m3_fw.mdt"; interrupts-extended = <&wcss_smp2p_in 16 0>, <&wcss_smp2p_in 17 0>, <&wcss_smp2p_in 20 0>, <&wcss_smp2p_in 19 0>; interrupt-names ="fatal", "ready", "spawn_ack", "stop-ack"; qcom,smem-states = <&wcss_smp2p_out 16>, <&wcss_smp2p_out 17>, <&wcss_smp2p_out 18>; qcom,smem-state-names = "shutdown", "stop", "spawn"; qca,asid = <2>; qca,auto-restart; #ifdef __IPQ_MEM_PROFILE_256_MB__ memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, <&q6_qcn6122_etr_1>; #else memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, <&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>; #endif }; /* QCN6122 5G */ q6v5_wcss_userpd3 { m3_firmware = "qcn6122/m3_fw.mdt"; interrupts-extended = <&wcss_smp2p_in 24 0>, <&wcss_smp2p_in 25 0>, <&wcss_smp2p_in 28 0>, <&wcss_smp2p_in 27 0>; interrupt-names ="fatal", "ready", "spawn_ack", "stop-ack"; qcom,smem-states = <&wcss_smp2p_out 24>, <&wcss_smp2p_out 25>, <&wcss_smp2p_out 26>; qcom,smem-state-names = "shutdown", "stop", "spawn"; qca,asid = <3>; qca,auto-restart; #ifdef __IPQ_MEM_PROFILE_256_MB__ memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, <&q6_qcn6122_etr_2>; #else memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, <&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>; #endif }; }; &i2c_0 { pinctrl-0 = <&i2c_pins>; pinctrl-names = "default"; status = "disabled"; }; &qgic_msi_0 { status = "ok"; }; &qgic_msi_1 { status = "ok"; }; &wifi0 { /* IPQ5018 */ qcom,multipd_arch; qcom,userpd-subsys-name = "q6v5_wcss_userpd1"; #ifdef __IPQ_MEM_PROFILE_256_MB__ qcom,tgt-mem-mode = <2>; #else qcom,tgt-mem-mode = <1>; #endif qcom,board_id = <0x23>; qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>; #ifdef __CNSS2__ qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>; #else qcom,caldb-addr = <0x4D400000>; m3-dump-addr = <0x4D200000>; #endif qcom,caldb-size = <0x200000>; status = "ok"; }; &wifi1 { /* QCN6122 5G */ qcom,multipd_arch; qcom,userpd-subsys-name = "q6v5_wcss_userpd2"; #ifdef __IPQ_MEM_PROFILE_256_MB__ qcom,tgt-mem-mode = <2>; #else qcom,tgt-mem-mode = <1>; #endif qcom,board_id = <0x60>; qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>; #ifdef __CNSS2__ qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>; #else qcom,caldb-addr = <0x4E800000>; m3-dump-addr = <0x4E600000>; #endif qcom,caldb-size = <0x500000>; status = "ok"; }; &wifi2 { /* QCN6122 6G */ qcom,multipd_arch; qcom,userpd-subsys-name = "q6v5_wcss_userpd3"; #ifdef __IPQ_MEM_PROFILE_256_MB__ qcom,tgt-mem-mode = <2>; #else qcom,tgt-mem-mode = <1>; #endif qcom,board_id = <0xb0>; qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>; #ifdef __CNSS2__ qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>; #else qcom,caldb-addr = <0x4FF00000>; m3-dump-addr = <0x4FD00000>; #endif qcom,caldb-size = <0x500000>; status = "ok"; };