--- zzzz-none-000/linux-4.4.271/arch/arm/boot/dts/qcom-ipq8064-ap148.dts	2021-06-03 06:22:09.000000000 +0000
+++ dakota-7530ac-750/linux-4.4.271/arch/arm/boot/dts/qcom-ipq8064-ap148.dts	2023-01-11 09:25:41.000000000 +0000
@@ -1,101 +1,17 @@
+/* Copyright (c) 2015, 2016 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
 #include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
-	model = "Qualcomm IPQ8064/AP148";
-	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
-	aliases {
-		serial0 = &gsbi4_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
-	soc {
-		pinmux@800000 {
-			i2c4_pins: i2c4_pinmux {
-				pins = "gpio12", "gpio13";
-				function = "gsbi4";
-				bias-disable;
-			};
-
-			spi_pins: spi_pins {
-				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					drive-strength = <10>;
-					bias-none;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
-			serial@16340000 {
-				status = "ok";
-			};
-
-			i2c4: i2c@16380000 {
-				status = "ok";
-
-				clock-frequency = <200000>;
-
-				pinctrl-0 = <&i2c4_pins>;
-				pinctrl-names = "default";
-			};
-		};
-
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
-
-			spi4: spi@1a280000 {
-				status = "ok";
-				spi-max-frequency = <50000000>;
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 0>;
-
-				flash: m25p80@0 {
-					compatible = "s25fl256s1";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-
-					partition@0 {
-						label = "rootfs";
-						reg = <0x0 0x1000000>;
-					};
-
-					partition@1 {
-						label = "scratch";
-						reg = <0x1000000 0x1000000>;
-					};
-				};
-			};
-		};
-
-		sata-phy@1b400000 {
-			status = "ok";
-		};
-
-		sata@29000000 {
-			status = "ok";
-		};
-	};
-};
+#include "qcom-ipq8064-ap148.dtsi"