--- zzzz-none-000/linux-4.4.271/drivers/base/power/opp/core.c	2021-06-03 06:22:09.000000000 +0000
+++ dakota-7530ac-750/linux-4.4.271/drivers/base/power/opp/core.c	2023-01-11 09:25:41.000000000 +0000
@@ -551,6 +551,9 @@
 	if (!list_empty(&dev_opp->opp_list))
 		return;
 
+	if (dev_opp->supported_hw)
+		return;
+
 	list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp,
 				    node);
 
@@ -825,6 +828,145 @@
 }
 
 /**
+ * dev_pm_opp_set_supported_hw() - Set supported platforms
+ * @dev: Device for which supported-hw has to be set.
+ * @versions: Array of hierarchy of versions to match.
+ * @count: Number of elements in the array.
+ *
+ * This is required only for the V2 bindings, and it enables a platform to
+ * specify the hierarchy of versions it supports. OPP layer will then enable
+ * OPPs, which are available for those versions, based on its 'opp-supported-hw'
+ * property.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions,
+				unsigned int count)
+{
+	struct device_opp *dev_opp;
+	int ret = 0;
+
+	/* Hold our list modification lock here */
+	mutex_lock(&dev_opp_list_lock);
+
+	dev_opp = _add_device_opp(dev);
+	if (!dev_opp) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	/* Make sure there are no concurrent readers while updating dev_opp */
+	WARN_ON(!list_empty(&dev_opp->opp_list));
+
+	/* Do we already have a version hierarchy associated with dev_opp? */
+	if (dev_opp->supported_hw) {
+		dev_err(dev, "%s: Already have supported hardware list\n",
+			__func__);
+		ret = -EBUSY;
+		goto err;
+	}
+
+	dev_opp->supported_hw = kmemdup(versions, count * sizeof(*versions),
+					GFP_KERNEL);
+	if (!dev_opp->supported_hw) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	dev_opp->supported_hw_count = count;
+	mutex_unlock(&dev_opp_list_lock);
+	return 0;
+
+err:
+	_remove_device_opp(dev_opp);
+unlock:
+	mutex_unlock(&dev_opp_list_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_supported_hw);
+
+/**
+ * dev_pm_opp_put_supported_hw() - Releases resources blocked for supported hw
+ * @dev: Device for which supported-hw has to be set.
+ *
+ * This is required only for the V2 bindings, and is called for a matching
+ * dev_pm_opp_set_supported_hw(). Until this is called, the device_opp structure
+ * will not be freed.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_put_supported_hw(struct device *dev)
+{
+	struct device_opp *dev_opp;
+
+	/* Hold our list modification lock here */
+	mutex_lock(&dev_opp_list_lock);
+
+	/* Check for existing list for 'dev' first */
+	dev_opp = _find_device_opp(dev);
+	if (IS_ERR(dev_opp)) {
+		dev_err(dev, "Failed to find dev_opp: %ld\n", PTR_ERR(dev_opp));
+		goto unlock;
+	}
+
+	/* Make sure there are no concurrent readers while updating dev_opp */
+	WARN_ON(!list_empty(&dev_opp->opp_list));
+
+	if (!dev_opp->supported_hw) {
+		dev_err(dev, "%s: Doesn't have supported hardware list\n",
+			__func__);
+		goto unlock;
+	}
+
+	kfree(dev_opp->supported_hw);
+	dev_opp->supported_hw = NULL;
+	dev_opp->supported_hw_count = 0;
+
+	/* Try freeing device_opp if this was the last blocking resource */
+	_remove_device_opp(dev_opp);
+
+unlock:
+	mutex_unlock(&dev_opp_list_lock);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw);
+
+static bool _opp_is_supported(struct device *dev, struct device_opp *dev_opp,
+			      struct device_node *np)
+{
+	unsigned int count = dev_opp->supported_hw_count;
+	u32 version;
+	int ret;
+
+	if (!dev_opp->supported_hw)
+		return true;
+
+	while (count--) {
+		ret = of_property_read_u32_index(np, "opp-supported-hw", count,
+						 &version);
+		if (ret) {
+			dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n",
+				 __func__, count, ret);
+			return false;
+		}
+
+		/* Both of these are bitwise masks of the versions */
+		if (!(version & dev_opp->supported_hw[count]))
+			return false;
+	}
+
+	return true;
+}
+
+/**
  * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
  * @dev:	device for which we do this operation
  * @np:		device node
@@ -870,6 +1012,12 @@
 		goto free_opp;
 	}
 
+	/* Check if the OPP supports hardware's hierarchy of versions or not */
+	if (!_opp_is_supported(dev, dev_opp, np)) {
+		dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
+		goto free_opp;
+	}
+
 	/*
 	 * Rate is defined as an unsigned long in clk API, and so casting
 	 * explicitly to its type. Must be fixed once rate is 64 bit