--- zzzz-none-000/linux-4.4.271/drivers/usb/host/xhci.c	2021-06-03 06:22:09.000000000 +0000
+++ dakota-7530ac-750/linux-4.4.271/drivers/usb/host/xhci.c	2023-01-11 09:25:42.000000000 +0000
@@ -30,6 +30,20 @@
 #include <linux/dmi.h>
 #include <linux/dma-mapping.h>
 
+#if defined (CONFIG_AVM_KERNEL)
+#include <asm/mach_avm.h>
+#include <linux/avm_hw_config.h>
+#include <linux/workqueue.h>
+
+static int usb_power_gpio  = -1;
+static struct delayed_work xhci_vbus_work;
+
+int usb3port_config = 0; //default USB2 only
+module_param(usb3port_config, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(usb3port_config, "Bitmask of allowed USB3 ports");
+
+#endif
+
 #include "xhci.h"
 #include "xhci-trace.h"
 
@@ -564,6 +578,15 @@
 /*-------------------------------------------------------------------------*/
 
 
+#if defined (CONFIG_AVM_KERNEL)
+static void xhci_vbus_work_func(struct work_struct *work) {
+	if(usb_power_gpio > 0) {
+		avm_gpio_out_bit(usb_power_gpio , 1);  /*--- VBUS ON ---*/
+		printk(KERN_INFO "xHCI: delayed VBUS POWER on\n");
+	}
+}
+#endif
+
 static int xhci_run_finished(struct xhci_hcd *xhci)
 {
 	if (xhci_start(xhci)) {
@@ -576,6 +599,13 @@
 	if (xhci->quirks & XHCI_NEC_HOST)
 		xhci_ring_cmd_db(xhci);
 
+#if defined (CONFIG_AVM_KERNEL)
+	/* 20180814 AVM/WKR delay VBUS power after host initialization */
+	cancel_delayed_work_sync(&xhci_vbus_work);
+	printk(KERN_INFO "xHCI: delay VBUS POWER on for 50 ms\n");
+	schedule_delayed_work(&xhci_vbus_work, msecs_to_jiffies(50));
+#endif
+
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"Finished xhci_run for USB3 roothub");
 	return 0;
@@ -724,6 +754,17 @@
 			"xhci_stop completed - status = %x",
 			readl(&xhci->op_regs->status));
 	mutex_unlock(&xhci->mutex);
+
+#if defined (CONFIG_AVM_KERNEL)
+	cancel_delayed_work_sync(&xhci_vbus_work);
+
+	/* 20171108 AVM/VGJ - Turn off port power */
+	if(usb_power_gpio > 0) {
+		avm_gpio_out_bit(usb_power_gpio , 0);  /*--- VBUS OFF ---*/
+	}
+
+	printk(KERN_INFO "xHCI: PORT POWER off");
+#endif
 }
 
 /*
@@ -5122,6 +5163,17 @@
 
 static int __init xhci_hcd_init(void)
 {
+#if defined (CONFIG_AVM_KERNEL)
+	/* 20171108 AVM/VGJ - Get VBUS power pin and initialize it */
+	int retval = avm_get_hw_config(AVM_HW_CONFIG_VERSION, "gpio_avm_usb_power_enable", &usb_power_gpio, NULL);
+	if (retval >= 0) {
+		avm_gpio_ctrl(usb_power_gpio, GPIO_PIN, GPIO_OUTPUT_PIN);
+		avm_gpio_out_bit(usb_power_gpio, 0); /* VBUS off */
+	}
+
+	INIT_DELAYED_WORK(&xhci_vbus_work, xhci_vbus_work_func);
+#endif
+
 	/*
 	 * Check the compiler generated sizes of structures that must be laid
 	 * out in specific ways for hardware access.