--- zzzz-none-000/linux-4.4.271/include/linux/ieee80211.h 2021-06-03 06:22:09.000000000 +0000 +++ dakota-7530ac-750/linux-4.4.271/include/linux/ieee80211.h 2023-01-11 09:25:43.000000000 +0000 @@ -1020,8 +1020,9 @@ } u; } __packed __aligned(2); -/* Supported Rates value encodings in 802.11n-2009 7.3.2.2 */ +/* Supported rates membership selectors */ #define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127 +#define BSS_MEMBERSHIP_SELECTOR_VHT_PHY 126 /* mgmt header + 1 byte category code */ #define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u) @@ -1512,6 +1513,106 @@ __le16 basic_mcs_set; } __packed; +/** + * struct ieee80211_he_cap_elem - HE capabilities element + * + * This structure is the "HE capabilities element" fixed fields as + * described in P802.11ax_D3.0 section 9.4.2.237.2 and 9.4.2.237.3 + */ +struct ieee80211_he_cap_elem { + u8 mac_cap_info[6]; + u8 phy_cap_info[11]; +} __packed; + +#define IEEE80211_TX_RX_MCS_NSS_DESC_MAX_LEN 5 + +/** + * enum ieee80211_he_mcs_support - HE MCS support definitions + * @IEEE80211_HE_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the + * number of streams + * @IEEE80211_HE_MCS_SUPPORT_0_9: MCSes 0-9 are supported + * @IEEE80211_HE_MCS_SUPPORT_0_11: MCSes 0-11 are supported + * @IEEE80211_HE_MCS_NOT_SUPPORTED: This number of streams isn't supported + * + * These definitions are used in each 2-bit subfield of the rx_mcs_* + * and tx_mcs_* fields of &struct ieee80211_he_mcs_nss_supp, which are + * both split into 8 subfields by number of streams. These values indicate + * which MCSes are supported for the number of streams the value appears + * for. + */ +enum ieee80211_he_mcs_support { + IEEE80211_HE_MCS_SUPPORT_0_7 = 0, + IEEE80211_HE_MCS_SUPPORT_0_9 = 1, + IEEE80211_HE_MCS_SUPPORT_0_11 = 2, + IEEE80211_HE_MCS_NOT_SUPPORTED = 3, +}; + +/** + * struct ieee80211_he_mcs_nss_supp - HE Tx/Rx HE MCS NSS Support Field + * + * This structure holds the data required for the Tx/Rx HE MCS NSS Support Field + * described in P802.11ax_D2.0 section 9.4.2.237.4 + * + * @rx_mcs_80: Rx MCS map 2 bits for each stream, total 8 streams, for channel + * widths less than 80MHz. + * @tx_mcs_80: Tx MCS map 2 bits for each stream, total 8 streams, for channel + * widths less than 80MHz. + * @rx_mcs_160: Rx MCS map 2 bits for each stream, total 8 streams, for channel + * width 160MHz. + * @tx_mcs_160: Tx MCS map 2 bits for each stream, total 8 streams, for channel + * width 160MHz. + * @rx_mcs_80p80: Rx MCS map 2 bits for each stream, total 8 streams, for + * channel width 80p80MHz. + * @tx_mcs_80p80: Tx MCS map 2 bits for each stream, total 8 streams, for + * channel width 80p80MHz. + */ +struct ieee80211_he_mcs_nss_supp { + __le16 rx_mcs_80; + __le16 tx_mcs_80; + __le16 rx_mcs_160; + __le16 tx_mcs_160; + __le16 rx_mcs_80p80; + __le16 tx_mcs_80p80; +} __packed; + +/** + * struct ieee80211_he_operation - HE capabilities element + * + * This structure is the "HE operation element" fields as + * described in P802.11ax_D2.0 section 9.4.2.238 + */ +struct ieee80211_he_operation { + __le32 he_oper_params; + __le16 he_mcs_nss_set; + /* Optional 0,1,3 or 4 bytes: depends on @he_oper_params */ + u8 optional[0]; +} __packed; + +/** + * struct ieee80211_he_mu_edca_param_ac_rec - MU AC Parameter Record field + * + * This structure is the "MU AC Parameter Record" fields as + * described in P802.11ax_D2.0 section 9.4.2.240 + */ +struct ieee80211_he_mu_edca_param_ac_rec { + u8 aifsn; + u8 ecw_min_max; + u8 mu_edca_timer; +} __packed; + +/** + * struct ieee80211_mu_edca_param_set - MU EDCA Parameter Set element + * + * This structure is the "MU EDCA Parameter Set element" fields as + * described in P802.11ax_D2.0 section 9.4.2.240 + */ +struct ieee80211_mu_edca_param_set { + u8 mu_qos_info; + struct ieee80211_he_mu_edca_param_ac_rec ac_be; + struct ieee80211_he_mu_edca_param_ac_rec ac_bk; + struct ieee80211_he_mu_edca_param_ac_rec ac_vi; + struct ieee80211_he_mu_edca_param_ac_rec ac_vo; +} __packed; /* 802.11ac VHT Capabilities */ #define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 @@ -1549,6 +1650,348 @@ #define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 #define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 +/* 802.11ax HE MAC capabilities */ +#define IEEE80211_HE_MAC_CAP0_HTC_HE 0x01 +#define IEEE80211_HE_MAC_CAP0_TWT_REQ 0x02 +#define IEEE80211_HE_MAC_CAP0_TWT_RES 0x04 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_NOT_SUPP 0x00 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_1 0x08 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_2 0x10 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_3 0x18 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_MASK 0x18 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_1 0x00 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_2 0x20 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_4 0x40 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_8 0x60 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_16 0x80 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_32 0xa0 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_64 0xc0 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_UNLIMITED 0xe0 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_MASK 0xe0 + +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_UNLIMITED 0x00 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_128 0x01 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_256 0x02 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_512 0x03 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_MASK 0x03 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_0US 0x00 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_8US 0x04 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US 0x08 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK 0x0c +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_1 0x00 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_2 0x10 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_3 0x20 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_4 0x30 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_5 0x40 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_6 0x50 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_7 0x60 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8 0x70 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_MASK 0x70 + +/* Link adaptation is split between byte HE_MAC_CAP1 and + * HE_MAC_CAP2. It should be set only if IEEE80211_HE_MAC_CAP0_HTC_HE + * in which case the following values apply: + * 0 = No feedback. + * 1 = reserved. + * 2 = Unsolicited feedback. + * 3 = both + */ +#define IEEE80211_HE_MAC_CAP1_LINK_ADAPTATION 0x80 + +#define IEEE80211_HE_MAC_CAP2_LINK_ADAPTATION 0x01 +#define IEEE80211_HE_MAC_CAP2_ALL_ACK 0x02 +#define IEEE80211_HE_MAC_CAP2_TRS 0x04 +#define IEEE80211_HE_MAC_CAP2_BSR 0x08 +#define IEEE80211_HE_MAC_CAP2_BCAST_TWT 0x10 +#define IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP 0x20 +#define IEEE80211_HE_MAC_CAP2_MU_CASCADING 0x40 +#define IEEE80211_HE_MAC_CAP2_ACK_EN 0x80 + +#define IEEE80211_HE_MAC_CAP3_OMI_CONTROL 0x02 +#define IEEE80211_HE_MAC_CAP3_OFDMA_RA 0x04 + +/* The maximum length of an A-MDPU is defined by the combination of the Maximum + * A-MDPU Length Exponent field in the HT capabilities, VHT capabilities and the + * same field in the HE capabilities. + */ +#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_USE_VHT 0x00 +#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_1 0x08 +#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2 0x10 +#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_RESERVED 0x18 +#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_MASK 0x18 +#define IEEE80211_HE_MAC_CAP3_AMSDU_FRAG 0x20 +#define IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED 0x40 +#define IEEE80211_HE_MAC_CAP3_RX_CTRL_FRAME_TO_MULTIBSS 0x80 + +#define IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG 0x01 +#define IEEE80211_HE_MAC_CAP4_QTP 0x02 +#define IEEE80211_HE_MAC_CAP4_BQR 0x04 +#define IEEE80211_HE_MAC_CAP4_SRP_RESP 0x08 +#define IEEE80211_HE_MAC_CAP4_NDP_FB_REP 0x10 +#define IEEE80211_HE_MAC_CAP4_OPS 0x20 +#define IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU 0x40 +/* Multi TID agg TX is split between byte #4 and #5 + * The value is a combination of B39,B40,B41 + */ +#define IEEE80211_HE_MAC_CAP4_MULTI_TID_AGG_TX_QOS_B39 0x80 + +#define IEEE80211_HE_MAC_CAP5_MULTI_TID_AGG_TX_QOS_B40 0x01 +#define IEEE80211_HE_MAC_CAP5_MULTI_TID_AGG_TX_QOS_B41 0x02 +#define IEEE80211_HE_MAC_CAP5_SUBCHAN_SELECVITE_TRANSMISSION 0x04 +#define IEEE80211_HE_MAC_CAP5_UL_2x996_TONE_RU 0x08 +#define IEEE80211_HE_MAC_CAP5_OM_CTRL_UL_MU_DATA_DIS_RX 0x10 + +/* 802.11ax HE PHY capabilities */ +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G 0x02 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G 0x04 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G 0x08 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G 0x10 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_2G 0x20 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_5G 0x40 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK 0xfe + +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_20MHZ 0x01 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_40MHZ 0x02 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_20MHZ 0x04 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_40MHZ 0x08 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK 0x0f +#define IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A 0x10 +#define IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD 0x20 +#define IEEE80211_HE_PHY_CAP1_HE_LTF_AND_GI_FOR_HE_PPDUS_0_8US 0x40 +/* Midamble RX/TX Max NSTS is split between byte #2 and byte #3 */ +#define IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS 0x80 + +#define IEEE80211_HE_PHY_CAP2_MIDAMBLE_RX_TX_MAX_NSTS 0x01 +#define IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US 0x02 +#define IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ 0x04 +#define IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ 0x08 +#define IEEE80211_HE_PHY_CAP2_DOPPLER_TX 0x10 +#define IEEE80211_HE_PHY_CAP2_DOPPLER_RX 0x20 + +/* Note that the meaning of UL MU below is different between an AP and a non-AP + * sta, where in the AP case it indicates support for Rx and in the non-AP sta + * case it indicates support for Tx. + */ +#define IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO 0x40 +#define IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO 0x80 + +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_NO_DCM 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_BPSK 0x01 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_QPSK 0x02 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_16_QAM 0x03 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK 0x03 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_1 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_2 0x04 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_NO_DCM 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_BPSK 0x08 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_QPSK 0x10 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_16_QAM 0x18 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK 0x18 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_1 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_2 0x20 +#define IEEE80211_HE_PHY_CAP3_RX_HE_MU_PPDU_FROM_NON_AP_STA 0x40 +#define IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER 0x80 + +#define IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE 0x01 +#define IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER 0x02 + +/* Minimal allowed value of Max STS under 80MHz is 3 */ +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4 0x0c +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_5 0x10 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_6 0x14 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_7 0x18 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_8 0x1c +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_MASK 0x1c + +/* Minimal allowed value of Max STS above 80MHz is 3 */ +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 0x60 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_5 0x80 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_6 0xa0 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_7 0xc0 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_8 0xe0 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_MASK 0xe0 + +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_1 0x00 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_2 0x01 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_3 0x02 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_4 0x03 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_5 0x04 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_6 0x05 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_7 0x06 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_8 0x07 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK 0x07 + +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_1 0x00 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_2 0x08 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_3 0x10 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_4 0x18 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_5 0x20 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_6 0x28 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_7 0x30 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_8 0x38 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK 0x38 + +#define IEEE80211_HE_PHY_CAP5_NG16_SU_FEEDBACK 0x40 +#define IEEE80211_HE_PHY_CAP5_NG16_MU_FEEDBACK 0x80 + +#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_42_SU 0x01 +#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_75_MU 0x02 +#define IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMER_FB 0x04 +#define IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMER_FB 0x08 +#define IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB 0x10 +#define IEEE80211_HE_PHY_CAP6_PARTIAL_BW_EXT_RANGE 0x20 +#define IEEE80211_HE_PHY_CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO 0x40 +#define IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT 0x80 + +#define IEEE80211_HE_PHY_CAP7_SRP_BASED_SR 0x01 +#define IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_AR 0x02 +#define IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI 0x04 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_1 0x08 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_2 0x10 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_3 0x18 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_4 0x20 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_5 0x28 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_6 0x30 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_7 0x38 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_MASK 0x38 +#define IEEE80211_HE_PHY_CAP7_STBC_TX_ABOVE_80MHZ 0x40 +#define IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ 0x80 + +#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI 0x01 +#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G 0x02 +#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU 0x04 +#define IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU 0x08 +#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_1XLTF_AND_08_US_GI 0x10 +#define IEEE80211_HE_PHY_CAP8_MIDAMBLE_RX_TX_2X_AND_1XLTF 0x20 +#define IEEE80211_HE_PHY_CAP8_DCM_MAX_BW_20MHZ 0x00 +#define IEEE80211_HE_PHY_CAP8_DCM_MAX_BW_40MHZ 0x40 +#define IEEE80211_HE_PHY_CAP8_DCM_MAX_BW_80MHZ 0x80 +#define IEEE80211_HE_PHY_CAP8_DCM_MAX_BW_160_OR_80P80_MHZ 0xc0 +#define IEEE80211_HE_PHY_CAP8_DCM_MAX_BW_MASK 0xc0 + +#define IEEE80211_HE_PHY_CAP9_LONGER_THAN_16_SIGB_OFDM_SYM 0x01 +#define IEEE80211_HE_PHY_CAP9_NON_TRIGGERED_CQI_FEEDBACK 0x02 +#define IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU 0x04 +#define IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU 0x08 +#define IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB 0x10 +#define IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB 0x20 + +/* 802.11ax HE TX/RX MCS NSS Support */ +#define IEEE80211_TX_RX_MCS_NSS_SUPP_HIGHEST_MCS_POS (3) +#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_POS (6) +#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_POS (11) +#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_MASK 0x07c0 +#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_MASK 0xf800 + +/* TX/RX HE MCS Support field Highest MCS subfield encoding */ +enum ieee80211_he_highest_mcs_supported_subfield_enc { + HIGHEST_MCS_SUPPORTED_MCS7 = 0, + HIGHEST_MCS_SUPPORTED_MCS8, + HIGHEST_MCS_SUPPORTED_MCS9, + HIGHEST_MCS_SUPPORTED_MCS10, + HIGHEST_MCS_SUPPORTED_MCS11, +}; + +/* Calculate 802.11ax HE capabilities IE Tx/Rx HE MCS NSS Support Field size */ +static inline u8 +ieee80211_he_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap) +{ + u8 count = 4; + + if (he_cap->phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G) + count += 4; + + if (he_cap->phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G) + count += 4; + + return count; +} + +/* 802.11ax HE PPE Thresholds */ +#define IEEE80211_PPE_THRES_NSS_SUPPORT_2NSS (1) +#define IEEE80211_PPE_THRES_NSS_POS (0) +#define IEEE80211_PPE_THRES_NSS_MASK (7) +#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_2x966_AND_966_RU \ + (BIT(5) | BIT(6)) +#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK 0x78 +#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_POS (3) +#define IEEE80211_PPE_THRES_INFO_PPET_SIZE (3) + +/* + * Calculate 802.11ax HE capabilities IE PPE field size + * Input: Header byte of ppe_thres (first byte), and HE capa IE's PHY cap u8* + */ +static inline u8 +ieee80211_he_ppe_size(u8 ppe_thres_hdr, const u8 *phy_cap_info) +{ + u8 n; + + if ((phy_cap_info[6] & + IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) == 0) + return 0; + + n = hweight8(ppe_thres_hdr & + IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK); + n *= (1 + ((ppe_thres_hdr & IEEE80211_PPE_THRES_NSS_MASK) >> + IEEE80211_PPE_THRES_NSS_POS)); + + /* + * Each pair is 6 bits, and we need to add the 7 "header" bits to the + * total size. + */ + n = (n * IEEE80211_PPE_THRES_INFO_PPET_SIZE * 2) + 7; + n = DIV_ROUND_UP(n, 8); + + return n; +} + +/* HE Operation defines */ +#define IEEE80211_HE_OPERATION_BSS_COLOR_MASK 0x0000003f +#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK 0x000001c0 +#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_OFFSET 6 +#define IEEE80211_HE_OPERATION_TWT_REQUIRED 0x00000200 +#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK 0x000ffc00 +#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_OFFSET 10 +#define IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR 0x000100000 +#define IEEE80211_HE_OPERATION_VHT_OPER_INFO 0x000200000 +#define IEEE80211_HE_OPERATION_MULTI_BSSID_AP 0x10000000 +#define IEEE80211_HE_OPERATION_TX_BSSID_INDICATOR 0x20000000 +#define IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED 0x40000000 + +/* + * ieee80211_he_oper_size - calculate 802.11ax HE Operations IE size + * @he_oper_ie: byte data of the He Operations IE, stating from the the byte + * after the ext ID byte. It is assumed that he_oper_ie has at least + * sizeof(struct ieee80211_he_operation) bytes, checked already in + * ieee802_11_parse_elems_crc() + * @return the actual size of the IE data (not including header), or 0 on error + */ +static inline u8 +ieee80211_he_oper_size(const u8 *he_oper_ie) +{ + struct ieee80211_he_operation *he_oper = (void *)he_oper_ie; + u8 oper_len = sizeof(struct ieee80211_he_operation); + u32 he_oper_params; + + /* Make sure the input is not NULL */ + if (!he_oper_ie) + return 0; + + /* Calc required length */ + he_oper_params = le32_to_cpu(he_oper->he_oper_params); + if (he_oper_params & IEEE80211_HE_OPERATION_VHT_OPER_INFO) + oper_len += 3; + if (he_oper_params & IEEE80211_HE_OPERATION_MULTI_BSSID_AP) + oper_len++; + + /* Add the first byte (extension ID) to the total length */ + oper_len++; + + return oper_len; +} + /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 @@ -1938,6 +2381,31 @@ WLAN_EID_VENDOR_SPECIFIC = 221, WLAN_EID_QOS_PARAMETER = 222, + WLAN_EID_CAG_NUMBER = 237, + WLAN_EID_AP_CSN = 239, + WLAN_EID_FILS_INDICATION = 240, + WLAN_EID_DILS = 241, + WLAN_EID_FRAGMENT = 242, + WLAN_EID_EXTENSION = 255 +}; + +/* Element ID Extensions for Element ID 255 */ +enum ieee80211_eid_ext { + WLAN_EID_EXT_ASSOC_DELAY_INFO = 1, + WLAN_EID_EXT_FILS_REQ_PARAMS = 2, + WLAN_EID_EXT_FILS_KEY_CONFIRM = 3, + WLAN_EID_EXT_FILS_SESSION = 4, + WLAN_EID_EXT_FILS_HLP_CONTAINER = 5, + WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN = 6, + WLAN_EID_EXT_KEY_DELIVERY = 7, + WLAN_EID_EXT_FILS_WRAPPED_DATA = 8, + WLAN_EID_EXT_FILS_PUBLIC_KEY = 12, + WLAN_EID_EXT_FILS_NONCE = 13, + WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE = 14, + WLAN_EID_EXT_HE_CAPABILITY = 35, + WLAN_EID_EXT_HE_OPERATION = 36, + WLAN_EID_EXT_UORA = 37, + WLAN_EID_EXT_HE_MU_EDCA = 38, }; /* Action category code */ @@ -2023,6 +2491,7 @@ enum ieee80211_key_len { WLAN_KEY_LEN_WEP40 = 5, WLAN_KEY_LEN_WEP104 = 13, + WLAN_KEY_LEN_WEP128 = 16, WLAN_KEY_LEN_CCMP = 16, WLAN_KEY_LEN_CCMP_256 = 32, WLAN_KEY_LEN_TKIP = 32, @@ -2051,6 +2520,9 @@ #define IEEE80211_GCMP_MIC_LEN 16 #define IEEE80211_GCMP_PN_LEN 6 +#define FILS_NONCE_LEN 16 +#define FILS_MAX_KEK_LEN 64 + /* Public action codes */ enum ieee80211_pub_actioncode { WLAN_PUB_ACTION_EXT_CHANSW_ANN = 4, @@ -2289,6 +2761,7 @@ #define WLAN_AKM_SUITE_TDLS 0x000FAC07 #define WLAN_AKM_SUITE_SAE 0x000FAC08 #define WLAN_AKM_SUITE_FT_OVER_SAE 0x000FAC09 +#define WLAN_AKM_WAPI_PSK 0x01721400 #define WLAN_MAX_KEY_LEN 32