--- zzzz-none-000/linux-2.6.19.2/arch/mips/momentum/ocelot_3/prom.c	2007-01-10 19:10:37.000000000 +0000
+++ davinci-8020-5504/linux-2.6.19.2/arch/mips/momentum/ocelot_3/prom.c	2007-01-11 07:38:19.000000000 +0000
@@ -34,11 +34,64 @@
 extern unsigned long marvell_base;
 extern unsigned long cpu_clock;
 
+#ifdef CONFIG_MV643XX_ETH
+extern unsigned char prom_mac_addr_base[6];
+#endif
+
 const char *get_system_type(void)
 {
 	return "Momentum Ocelot-3";
 }
 
+#ifdef CONFIG_MV643XX_ETH
+void burn_clocks(void)
+{
+	int i;
+
+	/* this loop should burn at least 1us -- this should be plenty */
+	for (i = 0; i < 0x10000; i++)
+		;
+}
+
+u8 exchange_bit(u8 val, u8 cs)
+{
+	/* place the data */
+	OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+	burn_clocks();
+
+	/* turn the clock on */
+	OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+	burn_clocks();
+
+	/* turn the clock off and read-strobe */
+	OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+	/* return the data */
+	return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
+}
+
+void get_mac(char dest[6])
+{
+	u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+	int i,j;
+
+	for (i = 0; i < 12; i++)
+		exchange_bit(read_opcode[i], 1);
+
+	for (j = 0; j < 6; j++) {
+		dest[j] = 0;
+		for (i = 0; i < 8; i++) {
+			dest[j] <<= 1;
+			dest[j] |= exchange_bit(0, 1);
+		}
+	}
+
+	/* turn off CS */
+	exchange_bit(0,0);
+}
+#endif
+
+
 #ifdef CONFIG_64BIT
 
 unsigned long signext(unsigned long addr)
@@ -175,6 +228,11 @@
 	mips_machgroup = MACH_GROUP_MOMENCO;
 	mips_machtype = MACH_MOMENCO_OCELOT_3;
 
+#ifdef CONFIG_MV643XX_ETH
+	/* get the base MAC address for on-board ethernet ports */
+	get_mac(prom_mac_addr_base);
+#endif
+
 #ifndef CONFIG_64BIT
 	debug_vectors->printf("Booting Linux kernel...\n");
 #endif