# # PHY # menu "PHY Subsystem" config GENERIC_PHY bool "PHY Core" help Generic PHY support. This framework is designed to provide a generic interface for PHY devices present in the kernel. This layer will have the generic API by which phy drivers can create PHY using the phy framework and phy users can obtain reference to the PHY. All the users of this framework should select this config. config PHY_BERLIN_USB tristate "Marvell Berlin USB PHY Driver" depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF select GENERIC_PHY help Enable this to support the USB PHY on Marvell Berlin SoCs. config PHY_BERLIN_SATA tristate "Marvell Berlin SATA PHY driver" depends on ARCH_BERLIN && HAS_IOMEM && OF select GENERIC_PHY help Enable this to support the SATA PHY on Marvell Berlin SoCs. config ARMADA375_USBCLUSTER_PHY def_bool y depends on MACH_ARMADA_375 || COMPILE_TEST depends on OF select GENERIC_PHY config PHY_DM816X_USB tristate "TI dm816x USB PHY driver" depends on ARCH_OMAP2PLUS depends on USB_SUPPORT select GENERIC_PHY select USB_PHY help Enable this for dm816x USB to work. config PHY_EXYNOS_MIPI_VIDEO tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" depends on HAS_IOMEM depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST select GENERIC_PHY default y if ARCH_S5PV210 || ARCH_EXYNOS help Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P and EXYNOS SoCs. config PHY_LPC18XX_USB_OTG tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" depends on OF && (ARCH_LPC18XX || COMPILE_TEST) depends on MFD_SYSCON select GENERIC_PHY help Enable this to support NXP LPC18xx/43xx internal USB OTG PHY. This driver is need for USB0 support on LPC18xx/43xx and takes care of enabling and clock setup. config PHY_PXA_28NM_HSIC tristate "Marvell USB HSIC 28nm PHY Driver" depends on HAS_IOMEM select GENERIC_PHY help Enable this to support Marvell USB HSIC PHY driver for Marvell SoC. This driver will do the PHY initialization and shutdown. The PHY driver will be used by Marvell ehci driver. To compile this driver as a module, choose M here. config PHY_PXA_28NM_USB2 tristate "Marvell USB 2.0 28nm PHY Driver" depends on HAS_IOMEM select GENERIC_PHY help Enable this to support Marvell USB 2.0 PHY driver for Marvell SoC. This driver will do the PHY initialization and shutdown. The PHY driver will be used by Marvell udc/ehci/otg driver. To compile this driver as a module, choose M here. config PHY_MVEBU_SATA def_bool y depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD depends on OF select GENERIC_PHY config PHY_MIPHY28LP tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" depends on ARCH_STI select GENERIC_PHY help Enable this to support the miphy transceiver (for SATA/PCIE/USB3) that is part of STMicroelectronics STiH407 SoC. config PHY_MIPHY365X tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" depends on ARCH_STI depends on HAS_IOMEM depends on OF select GENERIC_PHY help Enable this to support the miphy transceiver (for SATA/PCIE) that is part of STMicroelectronics STiH41x SoC series. config PHY_RCAR_GEN2 tristate "Renesas R-Car generation 2 USB PHY driver" depends on ARCH_SHMOBILE depends on GENERIC_PHY help Support for USB PHY found on Renesas R-Car generation 2 SoCs. config OMAP_CONTROL_PHY tristate "OMAP CONTROL PHY Driver" depends on ARCH_OMAP2PLUS || COMPILE_TEST help Enable this to add support for the PHY part present in the control module. This driver has API to power on the USB2 PHY and to write to the mailbox. The mailbox is present only in omap4 and the register to power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an additional register to power on USB3 PHY/SATA PHY/PCIE PHY (PIPE3 PHY). config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS depends on USB_SUPPORT select GENERIC_PHY select USB_PHY select OMAP_CONTROL_PHY depends on OMAP_OCP2SCP help Enable this to support the transceiver that is part of SOC. This driver takes care of all the PHY functionality apart from comparator. The USB OTG controller communicates with the comparator using this driver. config TI_PIPE3 tristate "TI PIPE3 PHY Driver" depends on ARCH_OMAP2PLUS || COMPILE_TEST select GENERIC_PHY select OMAP_CONTROL_PHY depends on OMAP_OCP2SCP help Enable this to support the PIPE3 PHY that is part of TI SOCs. This driver takes care of all the PHY functionality apart from comparator. This driver interacts with the "OMAP Control PHY Driver" to power on/off the PHY. config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS depends on USB_SUPPORT select GENERIC_PHY select USB_PHY help Enable this to support the USB OTG transceiver on TWL4030 family chips (including the TWL5030 and TPS659x0 devices). This transceiver supports high and full speed devices plus, in host mode, low speed. config PHY_EXYNOS_DP_VIDEO tristate "EXYNOS SoC series Display Port PHY driver" depends on OF depends on ARCH_EXYNOS || COMPILE_TEST default ARCH_EXYNOS select GENERIC_PHY help Support for Display Port PHY found on Samsung EXYNOS SoCs. config BCM_KONA_USB2_PHY tristate "Broadcom Kona USB2 PHY Driver" depends on HAS_IOMEM select GENERIC_PHY help Enable this to support the Broadcom Kona USB 2.0 PHY. config PHY_EXYNOS5250_SATA tristate "Exynos5250 Sata SerDes/PHY driver" depends on SOC_EXYNOS5250 depends on HAS_IOMEM depends on OF select GENERIC_PHY select I2C select I2C_S3C2410 select MFD_SYSCON help Enable this to support SATA SerDes/Phy found on Samsung's Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host port to accept one SATA device. config PHY_HIX5HD2_SATA tristate "HIX5HD2 SATA PHY Driver" depends on ARCH_HIX5HD2 && OF && HAS_IOMEM select GENERIC_PHY select MFD_SYSCON help Support for SATA PHY on Hisilicon hix5hd2 Soc. config PHY_MT65XX_USB3 tristate "Mediatek USB3.0 PHY Driver" depends on ARCH_MEDIATEK && OF select GENERIC_PHY help Say 'Y' here to add support for Mediatek USB3.0 PHY driver for mt65xx SoCs. it supports two usb2.0 ports and one usb3.0 port. config PHY_SUN4I_USB tristate "Allwinner sunxi SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF depends on RESET_CONTROLLER depends on EXTCON depends on POWER_SUPPLY select GENERIC_PHY help Enable this to support the transceiver that is part of Allwinner sunxi SoCs. This driver controls the entire USB PHY block, both the USB OTG parts, as well as the 2 regular USB 2 host PHYs. config PHY_SUN9I_USB tristate "Allwinner sun9i SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF depends on RESET_CONTROLLER depends on USB_COMMON select GENERIC_PHY help Enable this to support the transceiver that is part of Allwinner sun9i SoCs. This driver controls each individual USB 2 host PHY. config PHY_SAMSUNG_USB2 tristate "Samsung USB 2.0 PHY driver" depends on HAS_IOMEM depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 select GENERIC_PHY select MFD_SYSCON default ARCH_EXYNOS help Enable this to support the Samsung USB 2.0 PHY driver for Samsung SoCs. This driver provides the interface for USB 2.0 PHY. Support for particular PHYs will be enabled based on the SoC type in addition to this driver. config PHY_S5PV210_USB2 bool "Support for S5PV210" depends on PHY_SAMSUNG_USB2 depends on ARCH_S5PV210 help Enable USB PHY support for S5PV210. This option requires that Samsung USB 2.0 PHY driver is enabled and means that support for this particular SoC is compiled in the driver. In case of S5PV210 two phys are available - device and host. config PHY_EXYNOS4210_USB2 bool depends on PHY_SAMSUNG_USB2 default CPU_EXYNOS4210 config PHY_EXYNOS4X12_USB2 bool depends on PHY_SAMSUNG_USB2 default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 config PHY_EXYNOS5250_USB2 bool depends on PHY_SAMSUNG_USB2 default SOC_EXYNOS5250 || SOC_EXYNOS5420 config PHY_EXYNOS5_USBDRD tristate "Exynos5 SoC series USB DRD PHY driver" depends on ARCH_EXYNOS && OF depends on HAS_IOMEM depends on USB_DWC3_EXYNOS select GENERIC_PHY select MFD_SYSCON default y help Enable USB DRD PHY support for Exynos 5 SoC series. This driver provides PHY interface for USB 3.0 DRD controller present on Exynos5 SoC series. config PHY_PISTACHIO_USB tristate "IMG Pistachio USB2.0 PHY driver" depends on MACH_PISTACHIO select GENERIC_PHY help Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. config PHY_QCOM_APQ8064_SATA tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" depends on ARCH_QCOM depends on HAS_IOMEM depends on OF select GENERIC_PHY config PHY_QCA_PCIE_QMP bool "PCIe QMP PHY driver" depends on ARCH_QCOM depends on HAS_IOMEM depends on OF select GENERIC_PHY config PHY_QCOM_DWC3 tristate "Qualcomm DWC3 USB PHY support" depends on ARCH_QCOM depends on HAS_IOMEM depends on OF select GENERIC_PHY help This option enables support for the Synopsis PHYs present inside the Qualcomm USB3.0 DWC3 controller. This driver supports both HS and SS PHY controllers. config PHY_QCOM_IPQ806X_SATA tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" depends on ARCH_QCOM depends on HAS_IOMEM depends on OF select GENERIC_PHY config PHY_ROCKCHIP_USB tristate "Rockchip USB2 PHY Driver" depends on ARCH_ROCKCHIP && OF select GENERIC_PHY help Enable this to support the Rockchip USB 2.0 PHY. config PHY_ST_SPEAR1310_MIPHY tristate "ST SPEAR1310-MIPHY driver" select GENERIC_PHY depends on MACH_SPEAR1310 || COMPILE_TEST help Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. config PHY_ST_SPEAR1340_MIPHY tristate "ST SPEAR1340-MIPHY driver" select GENERIC_PHY depends on MACH_SPEAR1340 || COMPILE_TEST help Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. config PHY_XGENE tristate "APM X-Gene 15Gbps PHY support" depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) select GENERIC_PHY help This option enables support for APM X-Gene SoC multi-purpose PHY. config PHY_STIH407_USB tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" depends on RESET_CONTROLLER depends on ARCH_STI || COMPILE_TEST select GENERIC_PHY help Enable this support to enable the picoPHY device used by USB2 and USB3 controllers on STMicroelectronics STiH407 SoC families. config PHY_STIH41X_USB tristate "STMicroelectronics USB2 PHY driver for STiH41x series" depends on ARCH_STI select GENERIC_PHY help Enable this to support the USB transceiver that is part of STMicroelectronics STiH41x SoC series. config PHY_QCOM_UFS tristate "Qualcomm UFS PHY driver" depends on OF && ARCH_QCOM select GENERIC_PHY help Support for UFS PHY on QCOM chipsets. config PHY_TUSB1210 tristate "TI TUSB1210 ULPI PHY module" depends on USB_ULPI_BUS select GENERIC_PHY help Support for TI TUSB1210 USB ULPI PHY. config PHY_BRCMSTB_SATA tristate "Broadcom STB SATA PHY driver" depends on ARCH_BRCMSTB depends on OF select GENERIC_PHY help Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs. Likely useful only with CONFIG_SATA_BRCMSTB enabled. config PHY_CYGNUS_PCIE tristate "Broadcom Cygnus PCIe PHY driver" depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) select GENERIC_PHY default ARCH_BCM_CYGNUS help Enable this to support the Broadcom Cygnus PCIe PHY. If unsure, say N. config PHY_IPQ_BALDUR_USB tristate "USB Baldur PHY driver support" depends on (USB || USB_GADGET) && ARCH_QCOM select USB_PHY help Enable this to support the USB BALDUR PHY. It handles PHY initialization, clock management required after resetting the hardware and power management. This driver is required even for peripheral only or host only mode configurations. config PHY_IPQ_UNIPHY_USB tristate "USB Uniphy driver support" depends on (USB || USB_GADGET) && ARCH_QCOM select USB_PHY help Enable this to support the USB UNI PHY. It handles PHY initialization, clock management required after resetting the hardware and power management. This driver is required even for peripheral only or host only mode configurations. endmenu