if ARCH_DAVINCI config AINTC bool config CP_INTC bool select IRQ_DOMAIN config ARCH_DAVINCI_DMx bool menu "TI DaVinci Implementations" comment "DaVinci Core Type" config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" select AINTC select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DM355 bool "DaVinci 355 based system" select AINTC select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DM646x bool "DaVinci 646x based system" select AINTC select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) select ARCH_DAVINCI_DA8XX # needed on silicon revs 1.0, 1.1: select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE select CP_INTC config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) select ARCH_DAVINCI_DA8XX select CP_INTC config ARCH_DAVINCI_DA8XX bool config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" select AINTC select ARCH_DAVINCI_DMx comment "DaVinci Board Type" config MACH_DA8XX_DT bool "Support DA8XX platforms using device tree" default y depends on ARCH_DAVINCI_DA850 select PINCTRL help Say y here to include support for TI DaVinci DA850 based using Flattened Device Tree. More information at Documentation/devicetree config MACH_DAVINCI_EVM bool "TI DM644x EVM" default ARCH_DAVINCI_DM644x depends on ARCH_DAVINCI_DM644x help Configure this option to specify the whether the board used for development is a DM644x EVM config MACH_SFFSDR bool "Lyrtech SFFSDR" depends on ARCH_DAVINCI_DM644x help Say Y here to select the Lyrtech Small Form Factor Software Defined Radio (SFFSDR) board. config MACH_NEUROS_OSD2 bool "Neuros OSD2 Open Television Set Top Box" depends on ARCH_DAVINCI_DM644x help Configure this option to specify the whether the board used for development is a Neuros OSD2 Open Set Top Box. config MACH_DAVINCI_DM355_EVM bool "TI DM355 EVM" default ARCH_DAVINCI_DM355 depends on ARCH_DAVINCI_DM355 help Configure this option to specify the whether the board used for development is a DM355 EVM config MACH_DM355_LEOPARD bool "DM355 Leopard board" depends on ARCH_DAVINCI_DM355 help Configure this option to specify the whether the board used for development is a DM355 Leopard board. config MACH_DAVINCI_DM6467_EVM bool "TI DM6467 EVM" default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x select MACH_DAVINCI_DM6467TEVM help Configure this option to specify the whether the board used for development is a DM6467 EVM config MACH_DAVINCI_DM6467TEVM bool config MACH_DAVINCI_DM365_EVM bool "TI DM365 EVM" default ARCH_DAVINCI_DM365 depends on ARCH_DAVINCI_DM365 help Configure this option to specify whether the board used for development is a DM365 EVM config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 select GPIO_PCF857X if I2C help Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. choice prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" depends on MACH_DAVINCI_DA830_EVM help The presence of UI card on the DA830/OMAP-L137/AM17x EVM is detected automatically based on successful probe of the I2C based GPIO expander on that board. This option selected in this menu has an effect only in case of a successful UI card detection. config DA830_UI_LCD bool "LCD" help Say Y here to use the LCD as a framebuffer or simple character display. config DA830_UI_NAND bool "NAND flash" help Say Y here to use the NAND flash. Do not forget to setup the switch correctly. endchoice config MACH_DAVINCI_DA850_EVM bool "TI DA850/OMAP-L138/AM18x Reference Platform" default ARCH_DAVINCI_DA850 depends on ARCH_DAVINCI_DA850 help Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. choice prompt "Select peripherals connected to expander on UI board" depends on MACH_DAVINCI_DA850_EVM help The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x EVM is detected automatically based on successful probe of the I2C based GPIO expander on that card. This option selected in this menu has an effect only in case of a successful UI card detection. config DA850_UI_NONE bool "No peripheral is enabled" help Say Y if you do not want to enable any of the peripherals connected to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card config DA850_UI_RMII bool "RMII Ethernet PHY" help Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x EVM. This PHY is found on the UI daughter card that is supplied with the EVM. NOTE: Please take care while choosing this option, MII PHY will not be functional if RMII mode is selected. config DA850_UI_SD_VIDEO_PORT bool "Video Port Interface" help Say Y if you want to use Video Port Interface (VPIF) on the DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the UI daughter card that is supplied with the EVM. endchoice config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 help Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 System on Module. Information on this SoM may be found at http://www.mitydsp.com config MACH_OMAPL138_HAWKBOARD bool "TI AM1808 / OMAPL-138 Hawkboard platform" depends on ARCH_DAVINCI_DA850 help Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . Information of this board may be found at http://www.hawkboard.org/ config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI default y help Pin multiplexing support for DAVINCI boards. If your bootloader sets the multiplexing correctly, say N. Otherwise, or if unsure, say Y. config DAVINCI_MUX_DEBUG bool "Multiplexing debug output" depends on DAVINCI_MUX help Makes the multiplexing functions print out a lot of debug info. This is useful if you want to find out the correct values of the multiplexing registers. config DAVINCI_MUX_WARNINGS bool "Warn about pins the bootloader didn't set up" depends on DAVINCI_MUX help Choose Y here to warn whenever driver initialization logic needs to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect DAVINCI_MUX for your product. config DAVINCI_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_DAVINCI help Say Y if you want to reset unused clocks during boot. This option saves power, but assumes all drivers are using the clock framework. Broken drivers that do not yet use clock framework may not work with this option. If you are booting from another operating system, you probably do not want this option enabled until your device drivers work properly. endmenu endif