/* DVB USB compliant linux driver for mobile DVB-T USB devices based on * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-B) * * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de) * * based on GPL code from DiBcom, which has * Copyright (C) 2004 Amaury Demol for DiBcom * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * * see Documentation/dvb/README.dvb-usb for more information */ #include "dibusb.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int dib3000mb_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dibusb_state *st = adap->priv; return st->ops.tuner_pass_ctrl(fe, enable, st->tuner_addr); } static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_adapter *adap) { struct dib3000_config demod_cfg; struct dibusb_state *st = adap->priv; demod_cfg.demod_address = 0x8; adap->fe_adap[0].fe = dvb_attach(dib3000mb_attach, &demod_cfg, &adap->dev->i2c_adap, &st->ops); if ((adap->fe_adap[0].fe) == NULL) return -ENODEV; adap->fe_adap[0].fe->ops.i2c_gate_ctrl = dib3000mb_i2c_gate_ctrl; return 0; } static int dibusb_thomson_tuner_attach(struct dvb_usb_adapter *adap) { struct dibusb_state *st = adap->priv; st->tuner_addr = 0x61; dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap, DVB_PLL_TUA6010XS); return 0; } static int dibusb_panasonic_tuner_attach(struct dvb_usb_adapter *adap) { struct dibusb_state *st = adap->priv; st->tuner_addr = 0x60; dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, DVB_PLL_TDA665X); return 0; } /* Some of the Artec 1.1 device aren't equipped with the default tuner * (Thomson Cable), but with a Panasonic ENV77H11D5. This function figures * this out. */ static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap) { u8 b[2] = { 0,0 }, b2[1]; int ret = 0; struct i2c_msg msg[2] = { { .flags = 0, .buf = b, .len = 2 }, { .flags = I2C_M_RD, .buf = b2, .len = 1 }, }; struct dibusb_state *st = adap->priv; /* the Panasonic sits on I2C addrass 0x60, the Thomson on 0x61 */ msg[0].addr = msg[1].addr = st->tuner_addr = 0x60; if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 1); if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) { err("tuner i2c write failed."); return -EREMOTEIO; } if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 0); if (b2[0] == 0xfe) { info("This device has the Thomson Cable onboard. Which is default."); ret = dibusb_thomson_tuner_attach(adap); } else { info("This device has the Panasonic ENV77H11D5 onboard."); ret = dibusb_panasonic_tuner_attach(adap); } return ret; } /* USB Driver stuff */ static struct dvb_usb_device_properties dibusb1_1_properties; static struct dvb_usb_device_properties dibusb1_1_an2235_properties; static struct dvb_usb_device_properties dibusb2_0b_properties; static struct dvb_usb_device_properties artec_t1_usb2_properties; static int dibusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { if (0 == dvb_usb_device_init(intf, &dibusb1_1_properties, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &dibusb1_1_an2235_properties, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &dibusb2_0b_properties, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &artec_t1_usb2_properties, THIS_MODULE, NULL, adapter_nr)) return 0; return -EINVAL; } /* do not change the order of the ID table */ static struct usb_device_id dibusb_dib3000mb_table [] = { /* 00 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_COLD) }, /* 01 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_WARM) }, /* 02 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) }, /* 03 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) }, /* 04 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) }, /* 05 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_COLD) }, /* 06 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_WARM) }, /* 07 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_COLD) }, /* 08 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_WARM) }, /* 09 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_COLD) }, /* 10 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_WARM) }, /* 11 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_COLD) }, /* 12 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_WARM) }, /* 13 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_COLD) }, /* 14 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_WARM) }, /* 15 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_COLD) }, /* 16 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_WARM) }, /* 17 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_COLD) }, /* 18 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_WARM) }, /* 19 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) }, /* 20 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) }, /* 21 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) }, /* 22 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) }, /* 23 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) }, /* device ID with default DIBUSB2_0-firmware and with the hacked firmware */ /* 24 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) }, /* 25 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_COLD) }, /* 26 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_WARM) }, /* 27 */ { USB_DEVICE(USB_VID_KWORLD, USB_PID_KWORLD_VSTREAM_COLD) }, /* 28 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, /* 29 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_WARM) }, /* * XXX: As Artec just 'forgot' to program the EEPROM on some Artec T1 devices * we don't catch these faulty IDs (namely 'Cypress FX1 USB controller') that * have been left on the device. If you don't have such a device but an Artec * device that's supposed to work with this driver but is not detected by it, * free to enable CONFIG_DVB_USB_DIBUSB_MB_FAULTY via your kernel config. */ #ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY /* 30 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) }, #endif { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, dibusb_dib3000mb_table); static struct dvb_usb_device_properties dibusb1_1_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = CYPRESS_AN2135, .firmware = "dvb-usb-dibusb-5.0.0.11.fw", .num_adapters = 1, .adapter = { { .num_frontends = 1, .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 16, .streaming_ctrl = dibusb_streaming_ctrl, .pid_filter = dibusb_pid_filter, .pid_filter_ctrl = dibusb_pid_filter_ctrl, .frontend_attach = dibusb_dib3000mb_frontend_attach, .tuner_attach = dibusb_tuner_probe_and_attach, /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, .count = 7, .endpoint = 0x02, .u = { .bulk = { .buffersize = 4096, } } }, }}, .size_of_priv = sizeof(struct dibusb_state), } }, .power_ctrl = dibusb_power_ctrl, .rc.legacy = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_map_table = rc_map_dibusb_table, .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ .rc_query = dibusb_rc_query, }, .i2c_algo = &dibusb_i2c_algo, .generic_bulk_ctrl_endpoint = 0x01, .num_device_descs = 9, .devices = { { "AVerMedia AverTV DVBT USB1.1", { &dibusb_dib3000mb_table[0], NULL }, { &dibusb_dib3000mb_table[1], NULL }, }, { "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)", { &dibusb_dib3000mb_table[2], &dibusb_dib3000mb_table[4], NULL}, { &dibusb_dib3000mb_table[3], NULL }, }, { "DiBcom USB1.1 DVB-T reference design (MOD3000)", { &dibusb_dib3000mb_table[5], NULL }, { &dibusb_dib3000mb_table[6], NULL }, }, { "KWorld V-Stream XPERT DTV - DVB-T USB1.1", { &dibusb_dib3000mb_table[7], NULL }, { &dibusb_dib3000mb_table[8], NULL }, }, { "Grandtec USB1.1 DVB-T", { &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL }, { &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL }, }, { "Unknown USB1.1 DVB-T device ???? please report the name to the author", { &dibusb_dib3000mb_table[13], NULL }, { &dibusb_dib3000mb_table[14], NULL }, }, { "TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device", { &dibusb_dib3000mb_table[15], &dibusb_dib3000mb_table[17], NULL}, { &dibusb_dib3000mb_table[16], &dibusb_dib3000mb_table[18], NULL}, }, { "Artec T1 USB1.1 TVBOX with AN2135", { &dibusb_dib3000mb_table[19], NULL }, { &dibusb_dib3000mb_table[20], NULL }, }, { "VideoWalker DVB-T USB", { &dibusb_dib3000mb_table[25], NULL }, { &dibusb_dib3000mb_table[26], NULL }, }, } }; static struct dvb_usb_device_properties dibusb1_1_an2235_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = CYPRESS_AN2235, .firmware = "dvb-usb-dibusb-an2235-01.fw", .num_adapters = 1, .adapter = { { .num_frontends = 1, .fe = {{ .caps = DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_ADAP_HAS_PID_FILTER, .pid_filter_count = 16, .streaming_ctrl = dibusb_streaming_ctrl, .pid_filter = dibusb_pid_filter, .pid_filter_ctrl = dibusb_pid_filter_ctrl, .frontend_attach = dibusb_dib3000mb_frontend_attach, .tuner_attach = dibusb_tuner_probe_and_attach, /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, .count = 7, .endpoint = 0x02, .u = { .bulk = { .buffersize = 4096, } } }, }}, .size_of_priv = sizeof(struct dibusb_state), }, }, .power_ctrl = dibusb_power_ctrl, .rc.legacy = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_map_table = rc_map_dibusb_table, .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ .rc_query = dibusb_rc_query, }, .i2c_algo = &dibusb_i2c_algo, .generic_bulk_ctrl_endpoint = 0x01, #ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY .num_device_descs = 2, #else .num_device_descs = 1, #endif .devices = { { "Artec T1 USB1.1 TVBOX with AN2235", { &dibusb_dib3000mb_table[21], NULL }, { &dibusb_dib3000mb_table[22], NULL }, }, #ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY { "Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)", { &dibusb_dib3000mb_table[30], NULL }, { NULL }, }, { NULL }, #endif } }; static struct dvb_usb_device_properties dibusb2_0b_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-adstech-usb2-02.fw", .num_adapters = 1, .adapter = { { .num_frontends = 1, .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 16, .streaming_ctrl = dibusb2_0_streaming_ctrl, .pid_filter = dibusb_pid_filter, .pid_filter_ctrl = dibusb_pid_filter_ctrl, .frontend_attach = dibusb_dib3000mb_frontend_attach, .tuner_attach = dibusb_thomson_tuner_attach, /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, .count = 7, .endpoint = 0x06, .u = { .bulk = { .buffersize = 4096, } } }, }}, .size_of_priv = sizeof(struct dibusb_state), } }, .power_ctrl = dibusb2_0_power_ctrl, .rc.legacy = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_map_table = rc_map_dibusb_table, .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ .rc_query = dibusb_rc_query, }, .i2c_algo = &dibusb_i2c_algo, .generic_bulk_ctrl_endpoint = 0x01, .num_device_descs = 2, .devices = { { "KWorld/ADSTech Instant DVB-T USB2.0", { &dibusb_dib3000mb_table[23], NULL }, { &dibusb_dib3000mb_table[24], NULL }, }, { "KWorld Xpert DVB-T USB2.0", { &dibusb_dib3000mb_table[27], NULL }, { NULL } }, { NULL }, } }; static struct dvb_usb_device_properties artec_t1_usb2_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-dibusb-6.0.0.8.fw", .num_adapters = 1, .adapter = { { .num_frontends = 1, .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 16, .streaming_ctrl = dibusb2_0_streaming_ctrl, .pid_filter = dibusb_pid_filter, .pid_filter_ctrl = dibusb_pid_filter_ctrl, .frontend_attach = dibusb_dib3000mb_frontend_attach, .tuner_attach = dibusb_tuner_probe_and_attach, /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, .count = 7, .endpoint = 0x06, .u = { .bulk = { .buffersize = 4096, } } }, }}, .size_of_priv = sizeof(struct dibusb_state), } }, .power_ctrl = dibusb2_0_power_ctrl, .rc.legacy = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_map_table = rc_map_dibusb_table, .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ .rc_query = dibusb_rc_query, }, .i2c_algo = &dibusb_i2c_algo, .generic_bulk_ctrl_endpoint = 0x01, .num_device_descs = 1, .devices = { { "Artec T1 USB2.0", { &dibusb_dib3000mb_table[28], NULL }, { &dibusb_dib3000mb_table[29], NULL }, }, { NULL }, } }; static struct usb_driver dibusb_driver = { .name = "dvb_usb_dibusb_mb", .probe = dibusb_probe, .disconnect = dvb_usb_device_exit, .id_table = dibusb_dib3000mb_table, }; module_usb_driver(dibusb_driver); MODULE_AUTHOR("Patrick Boettcher "); MODULE_DESCRIPTION("Driver for DiBcom USB DVB-T devices (DiB3000M-B based)"); MODULE_VERSION("1.0"); MODULE_LICENSE("GPL");