/* Driver for USB Mass Storage compliant devices * Main Header File * * Current development and maintenance by: * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) * * Initial work by: * (c) 1999 Michael Gee (michael@linuxspecific.com) * * This driver is based on the 'USB Mass Storage Class' document. This * describes in detail the protocol used to communicate with such * devices. Clearly, the designers had SCSI and ATAPI commands in * mind when they created this document. The commands are all very * similar to commands in the SCSI-II and ATAPI specifications. * * It is important to note that in a number of cases this class * exhibits class-specific exemptions from the USB specification. * Notably the usage of NAK, STALL and ACK differs from the norm, in * that they are used to communicate wait, failed and OK on commands. * * Also, for certain devices, the interrupt endpoint is used to convey * status of a command. * * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more * information about this driver. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _USB_H_ #define _USB_H_ #include #include #include #include #include #include struct us_data; struct scsi_cmnd; /* * Unusual device list definitions */ struct us_unusual_dev { const char* vendorName; const char* productName; __u8 useProtocol; __u8 useTransport; int (*initFunction)(struct us_data *); }; /* Dynamic bitflag definitions (us->dflags): used in set_bit() etc. */ #define US_FLIDX_URB_ACTIVE 0 /* current_urb is in use */ #define US_FLIDX_SG_ACTIVE 1 /* current_sg is in use */ #define US_FLIDX_ABORTING 2 /* abort is in progress */ #define US_FLIDX_DISCONNECTING 3 /* disconnect in progress */ #define US_FLIDX_RESETTING 4 /* device reset in progress */ #define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */ #define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */ #define USB_STOR_STRING_LEN 32 /* * We provide a DMA-mapped I/O buffer for use with small USB transfers. * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a * 31-byte buffer. But Freecom needs a 64-byte buffer, so that's the * size we'll allocate. */ #define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */ #define US_SENSE_SIZE 18 /* Size of the autosense data buffer */ typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*); typedef int (*trans_reset)(struct us_data*); typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*); typedef void (*extra_data_destructor)(void *); /* extra data destructor */ typedef void (*pm_hook)(struct us_data *, int); /* power management hook */ #define US_SUSPEND 0 #define US_RESUME 1 /* we allocate one of these for every device that we remember */ struct us_data { /* The device we're working with * It's important to note: * (o) you must hold dev_mutex to change pusb_dev */ struct mutex dev_mutex; /* protect pusb_dev */ struct usb_device *pusb_dev; /* this usb_device */ struct usb_interface *pusb_intf; /* this interface */ struct us_unusual_dev *unusual_dev; /* device-filter entry */ unsigned long fflags; /* fixed flags from filter */ unsigned long dflags; /* dynamic atomic bitflags */ unsigned int send_bulk_pipe; /* cached pipe values */ unsigned int recv_bulk_pipe; unsigned int send_ctrl_pipe; unsigned int recv_ctrl_pipe; unsigned int recv_intr_pipe; /* information about the device */ char *transport_name; char *protocol_name; __le32 bcs_signature; u8 subclass; u8 protocol; u8 max_lun; u8 ifnum; /* interface number */ u8 ep_bInterval; /* interrupt interval */ /* function pointers for this device */ trans_cmnd transport; /* transport function */ trans_reset transport_reset; /* transport device reset */ proto_cmnd proto_handler; /* protocol handler */ /* SCSI interfaces */ struct scsi_cmnd *srb; /* current srb */ unsigned int tag; /* current dCBWTag */ /* control and bulk communications data */ struct urb *current_urb; /* USB requests */ struct usb_ctrlrequest *cr; /* control requests */ struct usb_sg_request current_sg; /* scatter-gather req. */ unsigned char *iobuf; /* I/O buffer */ unsigned char *sensebuf; /* sense data buffer */ dma_addr_t cr_dma; /* buffer DMA addresses */ dma_addr_t iobuf_dma; struct task_struct *ctl_thread; /* the control thread */ /* mutual exclusion and synchronization structures */ struct completion cmnd_ready; /* to sleep thread on */ struct completion notify; /* thread begin/end */ wait_queue_head_t delay_wait; /* wait during scan, reset */ struct completion scanning_done; /* wait for scan thread */ /* subdriver information */ void *extra; /* Any extra data */ extra_data_destructor extra_destructor;/* extra data destructor */ #ifdef CONFIG_PM pm_hook suspend_resume_hook; #endif /* hacks for READ CAPACITY bug handling */ int use_last_sector_hacks; int last_sector_retries; }; /* Convert between us_data and the corresponding Scsi_Host */ static inline struct Scsi_Host *us_to_host(struct us_data *us) { return container_of((void *) us, struct Scsi_Host, hostdata); } static inline struct us_data *host_to_us(struct Scsi_Host *host) { return (struct us_data *) host->hostdata; } /* Function to fill an inquiry response. See usb.c for details */ extern void fill_inquiry_response(struct us_data *us, unsigned char *data, unsigned int data_len); /* The scsi_lock() and scsi_unlock() macros protect the sm_state and the * single queue element srb for write access */ #define scsi_unlock(host) spin_unlock_irq(host->host_lock) #define scsi_lock(host) spin_lock_irq(host->host_lock) #endif