Qualcomm Technologies, Inc. BALDUR PHY
--------------------------------------

This file contains documentation for the USB BALDUR PHY found in Qualcomm
Technologies, Inc. IPQ40XX SoCs.

Required properties:
- compatible		: must be "qca,baldur-usb-hsphy"
- reg			: register ranges as listed in the reg-names property
- reg-names		: "phy_base"
- #phy-cells		: determine the number of cells that should be given
			  in the phandle while referencing this phy. It must
			  be zero.
- resets		: list of phandle and reset specifier pairs. There
			  should be two entries, one for the whole phy and one
			  for the port.
- reset-names           : list of reset signal names. Should be "por_rst"
			  and "srif_rst".

Optional properties:
- qca,host		: To determine host or device mode.

Example:
		usb3_hs_phy: hsphy@a6000 {
			compatible = "qca,baldur-usb-hsphy";
			reg = <0xa6000 0x40>;
			reg-names = "phy_base";
			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
			reset-names = "por_rst", "srif_rst";
			qca,host = <1>;
			#phy-cells = <0>;

			status = "ok";
		};