/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */

#include "Fritz_qcom-ipq4019.dtsi"
#include "../../../../include/linux/avm_hw_config_def.h"

/ {
	model = "AVM FRITZ!Powerline 1260E";
	compatible = "qcom,ipq4019";

	avm-hw-revision{
		compatible = "avm,avm_hw_revision";
		revision = "229";
		subrevision = "1";
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		avm_sbl_boot_string@86FFFC00 {
			compatible = "avm_sbl_boot_string";
			reg = <0x86FFFC00 0x512>;
			no-map;
		};
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		mdio@90000 {
			#address-cells = <1>;
			#size-cells = <0>;
			phy0: ethernet-phy@0 {
				reg = <0>;
			};
			phy1: ethernet-phy@1 {
				reg = <1>;
			};
			phy2: ethernet-phy@2 {
				reg = <2>;
			};
			phy3: ethernet-phy@3 {
				reg = <3>;
			};
			phy4: ethernet-phy@4 {
				reg = <4>;
				avm,no-suspend-phy;
			};
		};

		edma: edma@c080000 {
			qcom,num-gmac = <2>;

			gmac0 {
				qcom,phy-mdio-addr = <3>;
				qcom,poll-required = <1>;
				qcom,forced-speed = <0>;
				qcom,forced-duplex = <0>;
				vlan-tag = <0 0x10>;
				devname = "eth0";
				macname = "maca";
				mac = <0>;
			};
			gmac1 {
				qcom,phy-mdio-addr = <4>;
				qcom,poll-required = <1>;
				qcom,forced-speed = <0>;
				qcom,forced-duplex = <0>;
				vlan-tag = <0 0x20>;
				devname = "plc";
				macname = "usb_board_mac";
				mac = <1>;
			};
		};
	};

	avm_gpio {
		compatible = "avm,avm_gpio_generic";

		led_wlan: gpio_avm_led_wlan {
			value = <207>;
			param = <AVM_DEF_HW_PARAM_GPIO_OUT_ACTIVE_HIGH>;
		};
		led_plc: gpio_avm_led_plc {
			value = <208>;
			param = <AVM_DEF_HW_PARAM_GPIO_OUT_ACTIVE_HIGH>;
		};
		led_connect: gpio_avm_led_pairing {
			value = <209>;
			param = <AVM_DEF_HW_PARAM_GPIO_OUT_ACTIVE_HIGH>;
		};
		gpio_avm_reset_plc {
			value = <206>;
			param = <AVM_DEF_HW_PARAM_GPIO_OUT_ACTIVE_HIGH>;
		};
		button_connect: gpio_avm_button_pairing {
			value = <63>;
			param = <AVM_DEF_HW_PARAM_GPIO_IN_ACTIVE_LOW>;
		};
	};

	avm-hui {
		compatible = "avm,hui";

		repeater-one-no-rssi {
			compatible = "avm,hui-generic-led-avm";
			avm-gpios = <&led_connect>;
		};

		repeater-plc-wlan {
			compatible = "avm,hui-generic-led-avm";
			avm-gpios = <&led_wlan>;
		};

		repeater-plc {
			compatible = "avm,hui-generic-led-avm";
			avm-gpios = <&led_plc>;
		};

		plc-connect {
			compatible = "avm,hui-generic-button-avm";
			avm-gpios = <&button_connect>;
		};
	};

	avm_netdev_map {
		compatible = "avm,port_netdev";
		plcport;

		lan1 {
			netdev = "eth0";
		};
	};
};