/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */

#include "../../../arm64/boot/dts/qcom/Fritz_Box_HW253.dts"
#include "../../../../include/linux/avm_hw_config_def.h"

/ {
	model = "AVM FRITZ!Repeater 6000";

	avm-hw-revision{
		compatible = "avm,avm_hw_revision";
		revision = "253";
		subrevision = "2";
	};

	avm-dectstub-uart {
		compatible = "avm,dectstub_uart";
		/* ttyMSM1 */
		line = <1>;
	};
	avm_gpio {
		compatible = "avm,avm_gpio_generic";

		gpio_avm_dect_reset {
			value = <51>;
			param = <AVM_DEF_HW_PARAM_GPIO_OUT_ACTIVE_HIGH>;
		};
		gpio_avm_dect_rd {
			value = <48>;
			param = <AVM_DEF_HW_PARAM_NO_PARAM>;
		};
		gpio_avm_pcmlink_fsc {
			value    = <27>;
			param    = <AVM_DEF_HW_PARAM_GPIO_IN_ACTIVE_LOW>;
			function = <AVM_DEF_HW_FUNCTION_PINMUX2>;
		};
		gpio_avm_pcmlink_fsc_2 {
			value    = <31>;
			param    = <AVM_DEF_HW_PARAM_GPIO_IN_ACTIVE_LOW>;
			function = <AVM_DEF_HW_FUNCTION_PINMUX3>;
		};
		gpio_avm_pcmlink_dcl {
			value = <26>;
			param    = <AVM_DEF_HW_PARAM_GPIO_IN_ACTIVE_LOW>;
			function = <AVM_DEF_HW_FUNCTION_PINMUX2>;
		};
		gpio_avm_pcmlink_dcl_2 {
			value = <30>;
			param    = <AVM_DEF_HW_PARAM_GPIO_IN_ACTIVE_LOW>;
			function = <AVM_DEF_HW_FUNCTION_PINMUX3>;
		};
		gpio_avm_pcmlink_di {
			value = <28>;
			param    = <AVM_DEF_HW_PARAM_GPIO_IN_ACTIVE_LOW>;
			function = <AVM_DEF_HW_FUNCTION_PINMUX3>;
		};
		gpio_avm_pcmlink_do {
			value = <32>;
			param    = <AVM_DEF_HW_PARAM_GPIO_OUT_ACTIVE_LOW>;
			function = <AVM_DEF_HW_FUNCTION_PINMUX3>;
		};
		button_connect: gpio_avm_button_connect {
			value = <46>;
			param = <AVM_DEF_HW_PARAM_GPIO_IN_ACTIVE_LOW>;
		};
	};

	avm-hui {
		compatible = "avm,hui";
		pinctrl-0 = <&button_pins>;
		pinctrl-names = "default";

		colors {
			normal = <0x07>, <0x0B>, <0x0>;
			warn = <0x0F>, <0x05>, <0x0>;
			error = <0x16>, <0x0>, <0x0>;
		};

		repeater-connect {
			compatible = "avm,hui-generic-button-avm";
			avm-gpios = <&button_connect>;
		};
	};

	/* start of pcmlink */
	soc {
		tdm@0 {
			status = "ok";
		};
		qca-pcm-tdm@7709000 {
			status = "ok";
		};
		audio: audio@7700000 {
			status = "ok";
		};
		pcm: pcm@7704000 {
			status = "ok";
		};
		mbox0: mbox@7708000 {
			status = "ok";
		};
		mbox1: mbox@770a000 {
			status = "ok";
		};
		mbox2: mbox@770c000 {
			status = "ok";
		};
		mbox3: mbox@770e000 {
			status = "ok";
		};
		mbox4: mbox@7706000 {
			status = "ok";
		};
		stereo0: stereo@7709000 {
			status = "ok";
		};
		stereo1: stereo@770b000 {
			status = "ok";
		};
		stereo2: stereo@770d000 {
			status = "ok";
		};
		stereo3: stereo@770f000 {
			status = "ok";
		};
		/* end of pcmlink */
	};
};

&spi_0 { /* BLSP1 QUP1 */
	pinctrl-0 = <&spi_0_pins>;
	pinctrl-names = "default";
	cs-select = <0>;
	status = "okay";

	avm-hui-lc882x@0 {
		compatible = "avm,hui-generic-lc882x";
		spi-max-frequency = <400000>;
		reg = <0>;

		repeater-one-fr3000 {
			brightness-range = <25>, <127>;
			index = <1>;
			dimmable;
		};

		repeater-rssi-color {
			brightness-range = <25>, <127>;
			index = <0>;
			dimmable;
		};
	};
};

&ess_switch {
	qcom,port_phyinfo {
		port@5 {
			avm,slow_recovery;
		};
	};
};