/* * ARM64 Specific Low-Level ACPI Boot Support * * Copyright (C) 2013-2014, Linaro Ltd. * Author: Al Stone * Author: Graeme Gregory * Author: Hanjun Guo * Author: Tomasz Nowicki * Author: Naresh Bhat * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #define pr_fmt(fmt) "ACPI: " fmt #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_ACPI_APEI # include # include #endif int acpi_noirq = 1; /* skip ACPI IRQ initialization */ int acpi_disabled = 1; EXPORT_SYMBOL(acpi_disabled); int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */ EXPORT_SYMBOL(acpi_pci_disabled); static bool param_acpi_off __initdata; static bool param_acpi_force __initdata; static int __init parse_acpi(char *arg) { if (!arg) return -EINVAL; /* "acpi=off" disables both ACPI table parsing and interpreter */ if (strcmp(arg, "off") == 0) param_acpi_off = true; else if (strcmp(arg, "force") == 0) /* force ACPI to be enabled */ param_acpi_force = true; else return -EINVAL; /* Core will print when we return error */ return 0; } early_param("acpi", parse_acpi); static int __init dt_scan_depth1_nodes(unsigned long node, const char *uname, int depth, void *data) { /* * Return 1 as soon as we encounter a node at depth 1 that is * not the /chosen node. */ if (depth == 1 && (strcmp(uname, "chosen") != 0)) return 1; return 0; } /* * __acpi_map_table() will be called before page_init(), so early_ioremap() * or early_memremap() should be called here to for ACPI table mapping. */ char *__init __acpi_map_table(unsigned long phys, unsigned long size) { if (!size) return NULL; return early_memremap(phys, size); } void __init __acpi_unmap_table(char *map, unsigned long size) { if (!map || !size) return; early_memunmap(map, size); } bool __init acpi_psci_present(void) { return acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_COMPLIANT; } /* Whether HVC must be used instead of SMC as the PSCI conduit */ bool __init acpi_psci_use_hvc(void) { return acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_USE_HVC; } /* * acpi_fadt_sanity_check() - Check FADT presence and carry out sanity * checks on it * * Return 0 on success, <0 on failure */ static int __init acpi_fadt_sanity_check(void) { struct acpi_table_header *table; struct acpi_table_fadt *fadt; acpi_status status; acpi_size tbl_size; int ret = 0; /* * FADT is required on arm64; retrieve it to check its presence * and carry out revision and ACPI HW reduced compliancy tests */ status = acpi_get_table_with_size(ACPI_SIG_FADT, 0, &table, &tbl_size); if (ACPI_FAILURE(status)) { const char *msg = acpi_format_exception(status); pr_err("Failed to get FADT table, %s\n", msg); return -ENODEV; } fadt = (struct acpi_table_fadt *)table; /* * Revision in table header is the FADT Major revision, and there * is a minor revision of FADT which was introduced by ACPI 5.1, * we only deal with ACPI 5.1 or newer revision to get GIC and SMP * boot protocol configuration data. */ if (table->revision < 5 || (table->revision == 5 && fadt->minor_revision < 1)) { pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n", table->revision, fadt->minor_revision); if (!fadt->arm_boot_flags) { ret = -EINVAL; goto out; } pr_err("FADT has ARM boot flags set, assuming 5.1\n"); } if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) { pr_err("FADT not ACPI hardware reduced compliant\n"); ret = -EINVAL; } out: /* * acpi_get_table_with_size() creates FADT table mapping that * should be released after parsing and before resuming boot */ early_acpi_os_unmap_memory(table, tbl_size); return ret; } /* * acpi_boot_table_init() called from setup_arch(), always. * 1. find RSDP and get its address, and then find XSDT * 2. extract all tables and checksums them all * 3. check ACPI FADT revision * 4. check ACPI FADT HW reduced flag * * We can parse ACPI boot-time tables such as MADT after * this function is called. * * On return ACPI is enabled if either: * * - ACPI tables are initialized and sanity checks passed * - acpi=force was passed in the command line and ACPI was not disabled * explicitly through acpi=off command line parameter * * ACPI is disabled on function return otherwise */ void __init acpi_boot_table_init(void) { /* * Enable ACPI instead of device tree unless * - ACPI has been disabled explicitly (acpi=off), or * - the device tree is not empty (it has more than just a /chosen node) * and ACPI has not been force enabled (acpi=force) */ if (param_acpi_off || (!param_acpi_force && of_scan_flat_dt(dt_scan_depth1_nodes, NULL))) return; /* * ACPI is disabled at this point. Enable it in order to parse * the ACPI tables and carry out sanity checks */ enable_acpi(); /* * If ACPI tables are initialized and FADT sanity checks passed, * leave ACPI enabled and carry on booting; otherwise disable ACPI * on initialization error. * If acpi=force was passed on the command line it forces ACPI * to be enabled even if its initialization failed. */ if (acpi_table_init() || acpi_fadt_sanity_check()) { pr_err("Failed to init ACPI tables\n"); if (!param_acpi_force) disable_acpi(); } } #ifdef CONFIG_ACPI_APEI pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr) { /* * According to "Table 8 Map: EFI memory types to AArch64 memory * types" of UEFI 2.5 section 2.3.6.1, each EFI memory type is * mapped to a corresponding MAIR attribute encoding. * The EFI memory attribute advises all possible capabilities * of a memory region. We use the most efficient capability. */ u64 attr; attr = efi_mem_attributes(addr); if (attr & EFI_MEMORY_WB) return PAGE_KERNEL; if (attr & EFI_MEMORY_WT) return __pgprot(PROT_NORMAL_WT); if (attr & EFI_MEMORY_WC) return __pgprot(PROT_NORMAL_NC); return __pgprot(PROT_DEVICE_nGnRnE); } #endif