/* * Atheros AP81 board support * * Copyright (C) 2009-2010 Gabor Juhos * Copyright (C) 2009 Imre Kaloz * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. */ #include #include #include "dev-eth.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-m25p80.h" #include "dev-usb.h" #include "dev-wmac.h" #include "machtypes.h" #define AP81_GPIO_LED_STATUS 1 #define AP81_GPIO_LED_AOSS 3 #define AP81_GPIO_LED_WLAN 6 #define AP81_GPIO_LED_POWER 14 #define AP81_GPIO_BTN_SW4 12 #define AP81_GPIO_BTN_SW1 21 #define AP81_KEYS_POLL_INTERVAL 20 /* msecs */ #define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL) #define AP81_CAL_DATA_ADDR 0x1fff1000 static struct gpio_led ap81_leds_gpio[] __initdata = { { .name = "ap81:green:status", .gpio = AP81_GPIO_LED_STATUS, .active_low = 1, }, { .name = "ap81:amber:aoss", .gpio = AP81_GPIO_LED_AOSS, .active_low = 1, }, { .name = "ap81:green:wlan", .gpio = AP81_GPIO_LED_WLAN, .active_low = 1, }, { .name = "ap81:green:power", .gpio = AP81_GPIO_LED_POWER, .active_low = 1, } }; static struct gpio_keys_button ap81_gpio_keys[] __initdata = { { .desc = "sw1", .type = EV_KEY, .code = BTN_0, .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, .gpio = AP81_GPIO_BTN_SW1, .active_low = 1, } , { .desc = "sw4", .type = EV_KEY, .code = BTN_1, .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, .gpio = AP81_GPIO_BTN_SW4, .active_low = 1, } }; static void __init ap81_setup(void) { u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR); ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio), ap81_leds_gpio); ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, ARRAY_SIZE(ap81_gpio_keys), ap81_gpio_keys); ath79_register_m25p80(NULL); ath79_register_wmac(cal_data, NULL); ath79_register_usb(); ath79_register_mdio(0, 0x0); ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ath79_eth0_data.speed = SPEED_100; ath79_eth0_data.duplex = DUPLEX_FULL; ath79_eth0_data.has_ar8216 = 1; ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1); ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ath79_eth1_data.phy_mask = 0x10; ath79_register_eth(0); ath79_register_eth(1); } MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board", ap81_setup);