/* * TP-LINK Archer C5/C7/TL-WDR4900 v2 board support * * Copyright (c) 2013 Gabor Juhos * Copyright (c) 2014 施康成 * Copyright (c) 2014 Imre Kaloz * * Based on the Qualcomm Atheros AP135/AP136 reference board support code * Copyright (c) 2012 Qualcomm Atheros * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ #include #include #include #include #include #include #include #include "common.h" #include "dev-ap9x-pci.h" #include "dev-eth.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-m25p80.h" #include "dev-spi.h" #include "dev-usb.h" #include "dev-wmac.h" #include "machtypes.h" #include "pci.h" #define ARCHER_C7_GPIO_LED_WLAN2G 12 #define ARCHER_C7_GPIO_LED_SYSTEM 14 #define ARCHER_C7_GPIO_LED_QSS 15 #define ARCHER_C7_GPIO_LED_WLAN5G 17 #define ARCHER_C7_GPIO_LED_USB1 18 #define ARCHER_C7_GPIO_LED_USB2 19 #define ARCHER_C7_GPIO_BTN_RFKILL 13 #define ARCHER_C7_GPIO_BTN_RESET 16 #define ARCHER_C7_GPIO_USB1_POWER 22 #define ARCHER_C7_GPIO_USB2_POWER 21 #define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */ #define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL) #define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000 #define ARCHER_C7_PCIE_CALDATA_OFFSET 0x5000 static const char *archer_c7_part_probes[] = { "tp-link", NULL, }; static struct flash_platform_data archer_c7_flash_data = { .part_probes = archer_c7_part_probes, }; static struct gpio_led archer_c7_leds_gpio[] __initdata = { { .name = "tp-link:blue:qss", .gpio = ARCHER_C7_GPIO_LED_QSS, .active_low = 1, }, { .name = "tp-link:blue:system", .gpio = ARCHER_C7_GPIO_LED_SYSTEM, .active_low = 1, }, { .name = "tp-link:blue:wlan2g", .gpio = ARCHER_C7_GPIO_LED_WLAN2G, .active_low = 1, }, { .name = "tp-link:blue:wlan5g", .gpio = ARCHER_C7_GPIO_LED_WLAN5G, .active_low = 1, }, { .name = "tp-link:green:usb1", .gpio = ARCHER_C7_GPIO_LED_USB1, .active_low = 1, }, { .name = "tp-link:green:usb2", .gpio = ARCHER_C7_GPIO_LED_USB2, .active_low = 1, }, }; static struct gpio_keys_button archer_c7_gpio_keys[] __initdata = { { .desc = "Reset button", .type = EV_KEY, .code = KEY_WPS_BUTTON, .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, .gpio = ARCHER_C7_GPIO_BTN_RESET, .active_low = 1, }, { .desc = "RFKILL switch", .type = EV_SW, .code = KEY_RFKILL, .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, .gpio = ARCHER_C7_GPIO_BTN_RFKILL, }, }; static const struct ar8327_led_info archer_c7_leds_ar8327[] __initconst = { AR8327_LED_INFO(PHY0_0, HW, "tp-link:blue:wan"), AR8327_LED_INFO(PHY1_0, HW, "tp-link:blue:lan1"), AR8327_LED_INFO(PHY2_0, HW, "tp-link:blue:lan2"), AR8327_LED_INFO(PHY3_0, HW, "tp-link:blue:lan3"), AR8327_LED_INFO(PHY4_0, HW, "tp-link:blue:lan4"), }; /* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */ static struct ar8327_pad_cfg archer_c7_ar8327_pad0_cfg = { .mode = AR8327_PAD_MAC_SGMII, .sgmii_delay_en = true, }; /* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */ static struct ar8327_pad_cfg archer_c7_ar8327_pad6_cfg = { .mode = AR8327_PAD_MAC_RGMII, .txclk_delay_en = true, .rxclk_delay_en = true, .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, }; static struct ar8327_led_cfg archer_c7_ar8327_led_cfg = { .led_ctrl0 = 0xc737c737, .led_ctrl1 = 0x00000000, .led_ctrl2 = 0x00000000, .led_ctrl3 = 0x0030c300, .open_drain = false, }; static struct ar8327_platform_data archer_c7_ar8327_data = { .pad0_cfg = &archer_c7_ar8327_pad0_cfg, .pad6_cfg = &archer_c7_ar8327_pad6_cfg, .port0_cfg = { .force_link = 1, .speed = AR8327_PORT_SPEED_1000, .duplex = 1, .txpause = 1, .rxpause = 1, }, .port6_cfg = { .force_link = 1, .speed = AR8327_PORT_SPEED_1000, .duplex = 1, .txpause = 1, .rxpause = 1, }, .led_cfg = &archer_c7_ar8327_led_cfg, .num_leds = ARRAY_SIZE(archer_c7_leds_ar8327), .leds = archer_c7_leds_ar8327, }; static struct mdio_board_info archer_c7_mdio0_info[] = { { .bus_id = "ag71xx-mdio.0", .phy_addr = 0, .platform_data = &archer_c7_ar8327_data, }, }; static void __init common_setup(bool pcie_slot) { u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); u8 tmpmac[ETH_ALEN]; ath79_register_m25p80(&archer_c7_flash_data); ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio), archer_c7_leds_gpio); ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, ARRAY_SIZE(archer_c7_gpio_keys), archer_c7_gpio_keys); ath79_init_mac(tmpmac, mac, -1); ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, tmpmac); if (pcie_slot) { ath79_register_pci(); } else { ath79_init_mac(tmpmac, mac, -1); ap9x_pci_setup_wmac_led_pin(0, 0); ap91_pci_init(art + ARCHER_C7_PCIE_CALDATA_OFFSET, tmpmac); } mdiobus_register_board_info(archer_c7_mdio0_info, ARRAY_SIZE(archer_c7_mdio0_info)); ath79_register_mdio(0, 0x0); ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); /* GMAC0 is connected to the RMGII interface */ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth0_data.phy_mask = BIT(0); ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ath79_eth0_pll_data.pll_1000 = 0x56000000; ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); ath79_register_eth(0); /* GMAC1 is connected to the SGMII interface */ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; ath79_eth1_data.speed = SPEED_1000; ath79_eth1_data.duplex = DUPLEX_FULL; ath79_eth1_pll_data.pll_1000 = 0x03000101; ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); ath79_register_eth(1); gpio_request_one(ARCHER_C7_GPIO_USB1_POWER, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, "USB1 power"); gpio_request_one(ARCHER_C7_GPIO_USB2_POWER, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, "USB2 power"); ath79_register_usb(); } static void __init archer_c5_setup(void) { common_setup(true); } MIPS_MACHINE(ATH79_MACH_ARCHER_C5, "ARCHER-C5", "TP-LINK Archer C5", archer_c5_setup); static void __init archer_c7_setup(void) { common_setup(true); } MIPS_MACHINE(ATH79_MACH_ARCHER_C7, "ARCHER-C7", "TP-LINK Archer C7", archer_c7_setup); static void __init tl_wdr4900_v2_setup(void) { common_setup(false); } MIPS_MACHINE(ATH79_MACH_TL_WDR4900_V2, "TL-WDR4900-v2", "TP-LINK TL-WDR4900 v2", tl_wdr4900_v2_setup)