/* * DLink DIR-505 A1 board support * * Copyright (C) 2013 Gabor Juhos * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. */ #include #include #include #include "common.h" #include "dev-eth.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-m25p80.h" #include "dev-wmac.h" #include "dev-usb.h" #include "machtypes.h" #define DIR_505A1_GPIO_BTN_WPS 11 /* verify */ #define DIR_505A1_GPIO_BTN_RESET 12 /* verify */ #define DIR_505A1_GPIO_LED_RED 26 /* unused, fyi */ #define DIR_505A1_GPIO_LED_GREEN 27 #define DIR_505A1_GPIO_WAN_LED_ENABLE 1 #define DIR_505A1_KEYS_POLL_INTERVAL 20 /* msecs */ #define DIR_505A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_505A1_KEYS_POLL_INTERVAL) #define DIR_505A1_ART_ADDRESS 0x1f010000 #define DIR_505A1_CALDATA_OFFSET 0x1000 #define DIR_505A1_MAC_PART_ADDRESS 0x1f020000 #define DIR_505A1_LAN_MAC_OFFSET 0x04 #define DIR_505A1_WAN_MAC_OFFSET 0x16 static struct gpio_led dir_505_a1_leds_gpio[] __initdata = { { .name = "d-link:green:power", .gpio = DIR_505A1_GPIO_LED_GREEN, .active_low = 1, }, { .name = "d-link:red:status", .gpio = DIR_505A1_GPIO_LED_RED, .active_low = 1, }, }; static struct gpio_keys_button dir_505_a1_gpio_keys[] __initdata = { { .desc = "Reset button", .type = EV_KEY, .code = KEY_RESTART, .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL, .gpio = DIR_505A1_GPIO_BTN_RESET, .active_low = 0, }, { .desc = "WPS button", .type = EV_KEY, .code = KEY_WPS_BUTTON, .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL, .gpio = DIR_505A1_GPIO_BTN_WPS, .active_low = 1, } }; static void __init dir_505_a1_setup(void) { u8 *art = (u8 *) KSEG1ADDR(DIR_505A1_ART_ADDRESS); u8 *mac = (u8 *) KSEG1ADDR(DIR_505A1_MAC_PART_ADDRESS); u8 lan_mac[ETH_ALEN]; u8 wan_mac[ETH_ALEN]; ath79_setup_ar933x_phy4_switch(false, false); ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); gpio_request_one(DIR_505A1_GPIO_WAN_LED_ENABLE, GPIOF_OUT_INIT_LOW, "WAN LED enable"); ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_505_a1_leds_gpio), dir_505_a1_leds_gpio); ath79_register_gpio_keys_polled(1, DIR_505A1_KEYS_POLL_INTERVAL, ARRAY_SIZE(dir_505_a1_gpio_keys), dir_505_a1_gpio_keys); ath79_register_m25p80(NULL); ath79_register_usb(); ath79_parse_ascii_mac(mac + DIR_505A1_LAN_MAC_OFFSET, lan_mac); ath79_parse_ascii_mac(mac + DIR_505A1_WAN_MAC_OFFSET, wan_mac); ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0); ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0); ath79_register_mdio(0, 0x0); ath79_register_eth(1); ath79_register_eth(0); ath79_register_wmac(art + DIR_505A1_CALDATA_OFFSET, lan_mac); } MIPS_MACHINE(ATH79_MACH_DIR_505_A1, "DIR-505-A1", "D-Link DIR-505 rev. A1", dir_505_a1_setup);