/* * D-Link DIR-615 rev. I1 board support * Copyright (C) 2013-2015 Jaehoon You * * based on the DIR-600 rev. A1 board support code * Copyright (C) 2010-2012 Gabor Juhos * Copyright (C) 2012 Vadim Girlin * * based on the TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support code * Copyright (C) 2012 Gabor Juhos * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. */ #include #include #include #include "common.h" #include "dev-eth.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-m25p80.h" #include "dev-wmac.h" #include "machtypes.h" #define DIR_615_I1_GPIO_LED_WPS 15 #define DIR_615_I1_GPIO_LED_POWER_AMBER 14 #define DIR_615_I1_GPIO_LED_POWER_GREEN 4 #define DIR_615_I1_GPIO_LED_WAN_AMBER 22 #define DIR_615_I1_GPIO_LED_WAN_GREEN 12 #define DIR_615_I1_GPIO_LED_WLAN_GREEN 13 #define DIR_615_I1_GPIO_BTN_WPS 16 #define DIR_615_I1_GPIO_BTN_RESET 17 #define DIR_615_I1_KEYS_POLL_INTERVAL 20 /* msecs */ #define DIR_615_I1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_I1_KEYS_POLL_INTERVAL) #define DIR_615_I1_LAN_PHYMASK BIT(0) #define DIR_615_I1_WAN_PHYMASK BIT(4) #define DIR_615_I1_WLAN_MAC_ADDR 0x1fffffb4 static struct gpio_led dir_615_i1_leds_gpio[] __initdata = { { .name = "d-link:green:power", .gpio = DIR_615_I1_GPIO_LED_POWER_GREEN, }, { .name = "d-link:amber:power", .gpio = DIR_615_I1_GPIO_LED_POWER_AMBER, }, { .name = "d-link:amber:wan", .gpio = DIR_615_I1_GPIO_LED_WAN_AMBER, }, { .name = "d-link:green:wan", .gpio = DIR_615_I1_GPIO_LED_WAN_GREEN, .active_low = 1, }, { .name = "d-link:green:wlan", .gpio = DIR_615_I1_GPIO_LED_WLAN_GREEN, .active_low = 1, }, { .name = "d-link:blue:wps", .gpio = DIR_615_I1_GPIO_LED_WPS, .active_low = 1, } }; static struct gpio_keys_button dir_615_i1_gpio_keys[] __initdata = { { .desc = "reset", .type = EV_KEY, .code = KEY_RESTART, .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL, .gpio = DIR_615_I1_GPIO_BTN_RESET, .active_low = 1, }, { .desc = "wps", .type = EV_KEY, .code = KEY_WPS_BUTTON, .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL, .gpio = DIR_615_I1_GPIO_BTN_WPS, .active_low = 1, } }; static void __init dir_615_i1_setup(void) { u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); u8 mac[ETH_ALEN]; ath79_register_mdio(0, 0x0); ath79_register_mdio(1, ~(DIR_615_I1_WAN_PHYMASK)); ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615_I1_WLAN_MAC_ADDR), mac); ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); /* GMAC0 is connected to the PHY0 of the internal switch */ ath79_switch_data.phy4_mii_en = 1; ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ath79_eth0_data.phy_mask = DIR_615_I1_WAN_PHYMASK; ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; /* GMAC1 is connected to the internal switch */ ath79_eth1_data.phy_mask = DIR_615_I1_LAN_PHYMASK; ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; ath79_register_eth(0); ath79_register_eth(1); ath79_register_m25p80(NULL); /* Disable JTAG, enabling GPIOs 0-3 */ /* Configure OBS4 line, for GPIO 4*/ ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, AR934X_GPIO_FUNC_CLK_OBS4_EN); ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_i1_leds_gpio), dir_615_i1_leds_gpio); ath79_register_gpio_keys_polled(-1, DIR_615_I1_KEYS_POLL_INTERVAL, ARRAY_SIZE(dir_615_i1_gpio_keys), dir_615_i1_gpio_keys); ath79_register_wmac(eeprom, mac); } MIPS_MACHINE(ATH79_MACH_DIR_615_I1, "DIR-615-I1", "D-Link DIR-615 rev. I1", dir_615_i1_setup);