/* * MikroTik RouterBOARD 4xx series support * * Copyright (C) 2008-2012 Gabor Juhos * Copyright (C) 2008 Imre Kaloz * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" #include "dev-eth.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-usb.h" #include "machtypes.h" #include "pci.h" #define RB4XX_GPIO_USER_LED 4 #define RB4XX_GPIO_RESET_SWITCH 7 #define RB4XX_GPIO_CPLD_BASE 32 #define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1) #define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2) #define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3) #define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4) #define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5) #define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */ #define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL) static struct gpio_led rb4xx_leds_gpio[] __initdata = { { .name = "rb4xx:yellow:user", .gpio = RB4XX_GPIO_USER_LED, .active_low = 0, }, { .name = "rb4xx:green:led1", .gpio = RB4XX_GPIO_CPLD_LED1, .active_low = 1, }, { .name = "rb4xx:green:led2", .gpio = RB4XX_GPIO_CPLD_LED2, .active_low = 1, }, { .name = "rb4xx:green:led3", .gpio = RB4XX_GPIO_CPLD_LED3, .active_low = 1, }, { .name = "rb4xx:green:led4", .gpio = RB4XX_GPIO_CPLD_LED4, .active_low = 1, }, { .name = "rb4xx:green:led5", .gpio = RB4XX_GPIO_CPLD_LED5, .active_low = 0, }, }; static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = { { .desc = "reset_switch", .type = EV_KEY, .code = KEY_RESTART, .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL, .gpio = RB4XX_GPIO_RESET_SWITCH, .active_low = 1, } }; static struct platform_device rb4xx_nand_device = { .name = "rb4xx-nand", .id = -1, }; static struct ath79_pci_irq rb4xx_pci_irqs[] __initdata = { { .slot = 17, .pin = 1, .irq = ATH79_PCI_IRQ(2), }, { .slot = 18, .pin = 1, .irq = ATH79_PCI_IRQ(0), }, { .slot = 18, .pin = 2, .irq = ATH79_PCI_IRQ(1), }, { .slot = 19, .pin = 1, .irq = ATH79_PCI_IRQ(1), }, { .slot = 19, .pin = 2, .irq = ATH79_PCI_IRQ(2), }, { .slot = 20, .pin = 1, .irq = ATH79_PCI_IRQ(2), }, { .slot = 20, .pin = 2, .irq = ATH79_PCI_IRQ(0), }, { .slot = 21, .pin = 1, .irq = ATH79_PCI_IRQ(0), }, { .slot = 22, .pin = 1, .irq = ATH79_PCI_IRQ(1), }, { .slot = 22, .pin = 2, .irq = ATH79_PCI_IRQ(2), }, { .slot = 23, .pin = 1, .irq = ATH79_PCI_IRQ(2), }, { .slot = 23, .pin = 2, .irq = ATH79_PCI_IRQ(0), } }; static struct mtd_partition rb4xx_partitions[] = { { .name = "routerboot", .offset = 0, .size = 0x0b000, .mask_flags = MTD_WRITEABLE, }, { .name = "hard_config", .offset = 0x0b000, .size = 0x01000, .mask_flags = MTD_WRITEABLE, }, { .name = "bios", .offset = 0x0d000, .size = 0x02000, .mask_flags = MTD_WRITEABLE, }, { .name = "soft_config", .offset = 0x0f000, .size = 0x01000, } }; static struct flash_platform_data rb4xx_flash_data = { .type = "pm25lv512", .parts = rb4xx_partitions, .nr_parts = ARRAY_SIZE(rb4xx_partitions), }; static struct rb4xx_cpld_platform_data rb4xx_cpld_data = { .gpio_base = RB4XX_GPIO_CPLD_BASE, }; static struct mmc_spi_platform_data rb4xx_mmc_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, }; static struct spi_board_info rb4xx_spi_info[] = { { .bus_num = 0, .chip_select = 0, .max_speed_hz = 25000000, .modalias = "m25p80", .platform_data = &rb4xx_flash_data, }, { .bus_num = 0, .chip_select = 1, .max_speed_hz = 25000000, .modalias = "spi-rb4xx-cpld", .platform_data = &rb4xx_cpld_data, } }; static struct spi_board_info rb4xx_microsd_info[] = { { .bus_num = 0, .chip_select = 2, .max_speed_hz = 25000000, .modalias = "mmc_spi", .platform_data = &rb4xx_mmc_data, } }; static struct resource rb4xx_spi_resources[] = { { .start = AR71XX_SPI_BASE, .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, .flags = IORESOURCE_MEM, }, }; static struct platform_device rb4xx_spi_device = { .name = "rb4xx-spi", .id = -1, .resource = rb4xx_spi_resources, .num_resources = ARRAY_SIZE(rb4xx_spi_resources), }; static void __init rb4xx_generic_setup(void) { ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | AR71XX_GPIO_FUNC_SPI_CS2_EN); ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), rb4xx_leds_gpio); ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL, ARRAY_SIZE(rb4xx_gpio_keys), rb4xx_gpio_keys); spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); platform_device_register(&rb4xx_spi_device); platform_device_register(&rb4xx_nand_device); } static void __init rb411_setup(void) { rb4xx_generic_setup(); spi_register_board_info(rb4xx_microsd_info, ARRAY_SIZE(rb4xx_microsd_info)); ath79_register_mdio(0, 0xfffffffc); ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ath79_eth0_data.phy_mask = 0x00000003; ath79_register_eth(0); ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); ath79_register_pci(); } MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH", rb411_setup); static void __init rb411u_setup(void) { rb411_setup(); ath79_register_usb(); } MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U", rb411u_setup); #define RB433_LAN_PHYMASK BIT(0) #define RB433_WAN_PHYMASK BIT(4) #define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK) static void __init rb433_setup(void) { rb4xx_generic_setup(); spi_register_board_info(rb4xx_microsd_info, ARRAY_SIZE(rb4xx_microsd_info)); ath79_register_mdio(0, ~RB433_MDIO_PHYMASK); ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK; ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK; ath79_register_eth(1); ath79_register_eth(0); ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); ath79_register_pci(); } MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH", rb433_setup); static void __init rb433u_setup(void) { rb433_setup(); ath79_register_usb(); } MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH", rb433u_setup); static void __init rb435g_setup(void) { rb4xx_generic_setup(); spi_register_board_info(rb4xx_microsd_info, ARRAY_SIZE(rb4xx_microsd_info)); ath79_register_mdio(0, ~RB433_MDIO_PHYMASK); ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK; ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK; ath79_register_eth(1); ath79_register_eth(0); ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); ath79_register_pci(); ath79_register_usb(); } MIPS_MACHINE(ATH79_MACH_RB_435G, "435G", "MikroTik RouterBOARD 435G", rb435g_setup); #define RB450_LAN_PHYMASK BIT(0) #define RB450_WAN_PHYMASK BIT(4) #define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK) static void __init rb450_generic_setup(int gige) { rb4xx_generic_setup(); ath79_register_mdio(0, ~RB450_MDIO_PHYMASK); ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1); ath79_eth0_data.phy_if_mode = (gige) ? PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII; ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK; ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); ath79_eth1_data.phy_if_mode = (gige) ? PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII; ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK; ath79_register_eth(1); ath79_register_eth(0); } static void __init rb450_setup(void) { rb450_generic_setup(0); } MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450", rb450_setup); static void __init rb450g_setup(void) { rb450_generic_setup(1); spi_register_board_info(rb4xx_microsd_info, ARRAY_SIZE(rb4xx_microsd_info)); } MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G", rb450g_setup); static void __init rb493_setup(void) { rb4xx_generic_setup(); ath79_register_mdio(0, 0x3fffff00); ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ath79_eth0_data.speed = SPEED_100; ath79_eth0_data.duplex = DUPLEX_FULL; ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ath79_eth1_data.phy_mask = 0x00000001; ath79_register_eth(0); ath79_register_eth(1); ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); ath79_register_pci(); } MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH", rb493_setup); #define RB493G_GPIO_MDIO_MDC 7 #define RB493G_GPIO_MDIO_DATA 8 #define RB493G_MDIO_PHYMASK BIT(0) static struct mdio_gpio_platform_data rb493g_mdio_data = { .mdc = RB493G_GPIO_MDIO_MDC, .mdio = RB493G_GPIO_MDIO_DATA, .phy_mask = ~RB493G_MDIO_PHYMASK, }; static struct platform_device rb493g_mdio_device = { .name = "mdio-gpio", .id = -1, .dev = { .platform_data = &rb493g_mdio_data, }, }; static void __init rb493g_setup(void) { ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | AR71XX_GPIO_FUNC_SPI_CS2_EN); ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), rb4xx_leds_gpio); spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); spi_register_board_info(rb4xx_microsd_info, ARRAY_SIZE(rb4xx_microsd_info)); platform_device_register(&rb4xx_spi_device); platform_device_register(&rb4xx_nand_device); ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK); ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK; ath79_eth0_data.speed = SPEED_1000; ath79_eth0_data.duplex = DUPLEX_FULL; ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev; ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK; ath79_eth1_data.speed = SPEED_1000; ath79_eth1_data.duplex = DUPLEX_FULL; platform_device_register(&rb493g_mdio_device); ath79_register_eth(1); ath79_register_eth(0); ath79_register_usb(); ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); ath79_register_pci(); } MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G", rb493g_setup);