/* * Netgear WNDAP360 board support (proper leds / button support missing) * * Based on AP96 * Copyright (C) 2013 Jacek Kikiewicz * Copyright (C) 2009 Marco Porsch * Copyright (C) 2009-2012 Gabor Juhos * Copyright (C) 2010 Atheros Communications * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. */ #include #include #include #include "dev-ap9x-pci.h" #include "dev-eth.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-m25p80.h" #include "machtypes.h" #define WNDAP360_GPIO_LED_POWER_ORANGE 0 #define WNDAP360_GPIO_LED_POWER_GREEN 2 /* Reset button - next to the power connector */ #define WNDAP360_GPIO_BTN_RESET 8 #define WNDAP360_KEYS_POLL_INTERVAL 20 /* msecs */ #define WNDAP360_KEYS_DEBOUNCE_INTERVAL (3 * WNDAP360_KEYS_POLL_INTERVAL) #define WNDAP360_WMAC0_MAC_OFFSET 0x120c #define WNDAP360_WMAC1_MAC_OFFSET 0x520c #define WNDAP360_CALDATA0_OFFSET 0x1000 #define WNDAP360_CALDATA1_OFFSET 0x5000 /* * WNDAP360 this still uses leds definitions from AP96 * */ static struct gpio_led wndap360_leds_gpio[] __initdata = { { .name = "netgear:green:power", .gpio = WNDAP360_GPIO_LED_POWER_GREEN, .active_low = 1, }, { .name = "netgear:orange:power", .gpio = WNDAP360_GPIO_LED_POWER_ORANGE, .active_low = 1, } }; static struct gpio_keys_button wndap360_gpio_keys[] __initdata = { { .desc = "reset", .type = EV_KEY, .code = KEY_RESTART, .debounce_interval = WNDAP360_KEYS_DEBOUNCE_INTERVAL, .gpio = WNDAP360_GPIO_BTN_RESET, .active_low = 1, } }; #define WNDAP360_LAN_PHYMASK 0x0f static void __init wndap360_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ath79_register_mdio(0, ~(WNDAP360_LAN_PHYMASK)); /* Reusing wifi MAC with offset of 1 as eth0 MAC */ ath79_init_mac(ath79_eth0_data.mac_addr, art + WNDAP360_WMAC0_MAC_OFFSET, 1); ath79_eth0_pll_data.pll_1000 = 0x11110000; ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth0_data.phy_mask = WNDAP360_LAN_PHYMASK; ath79_eth0_data.speed = SPEED_1000; ath79_eth0_data.duplex = DUPLEX_FULL; ath79_register_eth(0); ath79_register_m25p80(NULL); ath79_register_leds_gpio(-1, ARRAY_SIZE(wndap360_leds_gpio), wndap360_leds_gpio); ath79_register_gpio_keys_polled(-1, WNDAP360_KEYS_POLL_INTERVAL, ARRAY_SIZE(wndap360_gpio_keys), wndap360_gpio_keys); ap9x_pci_setup_wmac_led_pin(0, 5); ap9x_pci_setup_wmac_led_pin(1, 5); ap94_pci_init(art + WNDAP360_CALDATA0_OFFSET, art + WNDAP360_WMAC0_MAC_OFFSET, art + WNDAP360_CALDATA1_OFFSET, art + WNDAP360_WMAC1_MAC_OFFSET); } MIPS_MACHINE(ATH79_MACH_WNDAP360, "WNDAP360", "Netgear WNDAP360", wndap360_setup);