/* * Compex WPJ344 board support * * Copyright (c) 2011 Qualcomm Atheros * Copyright (c) 2011-2012 Gabor Juhos * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ #include #include #include #include #include #include "common.h" #include "pci.h" #include "dev-ap9x-pci.h" #include "dev-gpio-buttons.h" #include "dev-eth.h" #include "dev-usb.h" #include "dev-leds-gpio.h" #include "dev-m25p80.h" #include "dev-spi.h" #include "dev-wmac.h" #include "machtypes.h" #define WPJ344_GPIO_LED_SIG1 15 #define WPJ344_GPIO_LED_SIG2 20 #define WPJ344_GPIO_LED_SIG3 21 #define WPJ344_GPIO_LED_SIG4 22 #define WPJ344_GPIO_LED_STATUS 14 #define WPJ344_GPIO_BTN_RESET 12 #define WPJ344_KEYS_POLL_INTERVAL 20 /* msecs */ #define WPJ344_KEYS_DEBOUNCE_INTERVAL (3 * WPJ344_KEYS_POLL_INTERVAL) #define WPJ344_MAC0_OFFSET 0 #define WPJ344_MAC1_OFFSET 6 #define WPJ344_WMAC_CALDATA_OFFSET 0x1000 #define WPJ344_PCIE_CALDATA_OFFSET 0x5000 static struct gpio_led wpj344_leds_gpio[] __initdata = { { .name = "wpj344:green:status", .gpio = WPJ344_GPIO_LED_STATUS, .active_low = 1, }, { .name = "wpj344:red:sig1", .gpio = WPJ344_GPIO_LED_SIG1, .active_low = 1, }, { .name = "wpj344:yellow:sig2", .gpio = WPJ344_GPIO_LED_SIG2, .active_low = 1, }, { .name = "wpj344:green:sig3", .gpio = WPJ344_GPIO_LED_SIG3, .active_low = 1, }, { .name = "wpj344:green:sig4", .gpio = WPJ344_GPIO_LED_SIG4, .active_low = 1, } }; static struct gpio_keys_button wpj344_gpio_keys[] __initdata = { { .desc = "reset", .type = EV_KEY, .code = KEY_RESTART, .debounce_interval = WPJ344_KEYS_DEBOUNCE_INTERVAL, .gpio = WPJ344_GPIO_BTN_RESET, .active_low = 1, }, }; static struct ar8327_pad_cfg wpj344_ar8327_pad0_cfg = { .mode = AR8327_PAD_MAC_RGMII, .txclk_delay_en = true, .rxclk_delay_en = true, .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, }; static struct ar8327_led_cfg wpj344_ar8327_led_cfg = { .led_ctrl0 = 0x00000000, .led_ctrl1 = 0xc737c737, .led_ctrl2 = 0x00000000, .led_ctrl3 = 0x00c30c00, .open_drain = true, }; static struct ar8327_platform_data wpj344_ar8327_data = { .pad0_cfg = &wpj344_ar8327_pad0_cfg, .port0_cfg = { .force_link = 1, .speed = AR8327_PORT_SPEED_1000, .duplex = 1, .txpause = 1, .rxpause = 1, }, .led_cfg = &wpj344_ar8327_led_cfg, }; static struct mdio_board_info wpj344_mdio0_info[] = { { .bus_id = "ag71xx-mdio.0", .phy_addr = 0, .platform_data = &wpj344_ar8327_data, }, }; static void __init wpj344_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ath79_register_m25p80(NULL); ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj344_leds_gpio), wpj344_leds_gpio); ath79_register_gpio_keys_polled(-1, WPJ344_KEYS_POLL_INTERVAL, ARRAY_SIZE(wpj344_gpio_keys), wpj344_gpio_keys); ath79_register_usb(); ath79_register_wmac(art + WPJ344_WMAC_CALDATA_OFFSET, NULL); ath79_register_pci(); mdiobus_register_board_info(wpj344_mdio0_info, ARRAY_SIZE(wpj344_mdio0_info)); ath79_register_mdio(1, 0x0); ath79_register_mdio(0, 0x0); ath79_init_mac(ath79_eth0_data.mac_addr, art + WPJ344_MAC0_OFFSET, 0); ath79_init_mac(ath79_eth1_data.mac_addr, art + WPJ344_MAC1_OFFSET, 0); ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE); /* GMAC0 is connected to an AR8327 switch */ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth0_data.phy_mask = BIT(0); ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ath79_eth0_pll_data.pll_1000 = 0x06000000; /* GMAC1 is connected to the internal switch */ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; ath79_eth1_data.speed = SPEED_1000; ath79_eth1_data.duplex = DUPLEX_FULL; ath79_register_eth(0); ath79_register_eth(1); } MIPS_MACHINE(ATH79_MACH_WPJ344, "WPJ344", "Compex WPJ344", wpj344_setup);