/* * Linksys WRT400N board support * * Copyright (C) 2009-2012 Gabor Juhos * Copyright (C) 2009 Imre Kaloz * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. */ #include #include #include #include "dev-ap9x-pci.h" #include "dev-eth.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-m25p80.h" #include "machtypes.h" #define WRT400N_GPIO_LED_POWER 1 #define WRT400N_GPIO_LED_WPS_BLUE 4 #define WRT400N_GPIO_LED_WPS_AMBER 5 #define WRT400N_GPIO_LED_WLAN 6 #define WRT400N_GPIO_BTN_RESET 8 #define WRT400N_GPIO_BTN_WLSEC 3 #define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */ #define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL) #define WRT400N_MAC_ADDR_OFFSET 0x120c #define WRT400N_CALDATA0_OFFSET 0x1000 #define WRT400N_CALDATA1_OFFSET 0x5000 static struct mtd_partition wrt400n_partitions[] = { { .name = "uboot", .offset = 0, .size = 0x030000, .mask_flags = MTD_WRITEABLE, }, { .name = "env", .offset = 0x030000, .size = 0x010000, .mask_flags = MTD_WRITEABLE, }, { .name = "linux", .offset = 0x040000, .size = 0x140000, }, { .name = "rootfs", .offset = 0x180000, .size = 0x630000, }, { .name = "nvram", .offset = 0x7b0000, .size = 0x010000, .mask_flags = MTD_WRITEABLE, }, { .name = "factory", .offset = 0x7c0000, .size = 0x010000, .mask_flags = MTD_WRITEABLE, }, { .name = "language", .offset = 0x7d0000, .size = 0x020000, .mask_flags = MTD_WRITEABLE, }, { .name = "caldata", .offset = 0x7f0000, .size = 0x010000, .mask_flags = MTD_WRITEABLE, }, { .name = "firmware", .offset = 0x040000, .size = 0x770000, } }; static struct flash_platform_data wrt400n_flash_data = { .parts = wrt400n_partitions, .nr_parts = ARRAY_SIZE(wrt400n_partitions), }; static struct gpio_led wrt400n_leds_gpio[] __initdata = { { .name = "wrt400n:blue:wps", .gpio = WRT400N_GPIO_LED_WPS_BLUE, .active_low = 1, }, { .name = "wrt400n:amber:wps", .gpio = WRT400N_GPIO_LED_WPS_AMBER, .active_low = 1, }, { .name = "wrt400n:blue:wlan", .gpio = WRT400N_GPIO_LED_WLAN, .active_low = 1, }, { .name = "wrt400n:blue:power", .gpio = WRT400N_GPIO_LED_POWER, .active_low = 0, .default_trigger = "default-on", } }; static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = { { .desc = "reset", .type = EV_KEY, .code = KEY_RESTART, .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, .gpio = WRT400N_GPIO_BTN_RESET, .active_low = 1, }, { .desc = "wlsec", .type = EV_KEY, .code = KEY_WPS_BUTTON, .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, .gpio = WRT400N_GPIO_BTN_WLSEC, .active_low = 1, } }; static void __init wrt400n_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); u8 *mac = art + WRT400N_MAC_ADDR_OFFSET; ath79_register_mdio(0, 0x0); ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ath79_eth0_data.speed = SPEED_100; ath79_eth0_data.duplex = DUPLEX_FULL; ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2); ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ath79_eth1_data.phy_mask = 0x10; ath79_register_eth(0); ath79_register_eth(1); ath79_register_m25p80(&wrt400n_flash_data); ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio), wrt400n_leds_gpio); ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL, ARRAY_SIZE(wrt400n_gpio_keys), wrt400n_gpio_keys); ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL, art + WRT400N_CALDATA1_OFFSET, NULL); } MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup);