/* * USB device quirk handling logic and table * * Copyright (c) 2007 Oliver Neukum * Copyright (c) 2007 Greg Kroah-Hartman * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * * */ #include #include #include #include "usb.h" /* Lists of quirky USB devices, split in device quirks and interface quirks. * Device quirks are applied at the very beginning of the enumeration process, * right after reading the device descriptor. They can thus only match on device * information. * * Interface quirks are applied after reading all the configuration descriptors. * They can match on both device and interface information. * * Note that the DELAY_INIT and HONOR_BNUMINTERFACES quirks do not make sense as * interface quirks, as they only influence the enumeration process which is run * before processing the interface quirks. * * Please keep the lists ordered by: * 1) Vendor ID * 2) Product ID * 3) Class ID */ static const struct usb_device_id usb_quirk_list[] = { /* CBM - Flash disk */ { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, /* WORLDE Controller KS49 or Prodipe MIDI 49C USB controller */ { USB_DEVICE(0x0218, 0x0201), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, /* WORLDE easy key (easykey.25) MIDI controller */ { USB_DEVICE(0x0218, 0x0401), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, /* HP v222w 16GB Mini USB Drive */ { USB_DEVICE(0x03f0, 0x3f40), .driver_info = USB_QUIRK_DELAY_INIT }, /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, /* USB3503 */ { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME }, /* Microsoft Wireless Laser Mouse 6000 Receiver */ { USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME }, /* Microsoft LifeCam-VX700 v2.0 */ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, /* Microsoft Surface Dock Ethernet (RTL8153 GigE) */ { USB_DEVICE(0x045e, 0x07c6), .driver_info = USB_QUIRK_NO_LPM }, /* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */ { USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME }, /* Logitech HD Webcam C270 */ { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME }, /* Logitech HD Pro Webcams C920, C920-C, C922, C925e and C930e */ { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x085b), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x085c), .driver_info = USB_QUIRK_DELAY_INIT }, /* Logitech ConferenceCam CC3000e */ { USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT }, /* Logitech PTZ Pro Camera */ { USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT }, /* Logitech Screen Share */ { USB_DEVICE(0x046d, 0x086c), .driver_info = USB_QUIRK_NO_LPM }, /* Logitech Quickcam Fusion */ { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME }, /* Logitech Quickcam Orbit MP */ { USB_DEVICE(0x046d, 0x08c2), .driver_info = USB_QUIRK_RESET_RESUME }, /* Logitech Quickcam Pro for Notebook */ { USB_DEVICE(0x046d, 0x08c3), .driver_info = USB_QUIRK_RESET_RESUME }, /* Logitech Quickcam Pro 5000 */ { USB_DEVICE(0x046d, 0x08c5), .driver_info = USB_QUIRK_RESET_RESUME }, /* Logitech Quickcam OEM Dell Notebook */ { USB_DEVICE(0x046d, 0x08c6), .driver_info = USB_QUIRK_RESET_RESUME }, /* Logitech Quickcam OEM Cisco VT Camera II */ { USB_DEVICE(0x046d, 0x08c7), .driver_info = USB_QUIRK_RESET_RESUME }, /* Logitech Harmony 700-series */ { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT }, /* Philips PSC805 audio device */ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, /* Plantronic Audio 655 DSP */ { USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME }, /* Plantronic Audio 648 USB */ { USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME }, /* Artisman Watchdog Dongle */ { USB_DEVICE(0x04b4, 0x0526), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, /* Microchip Joss Optical infrared touchboard device */ { USB_DEVICE(0x04d8, 0x000c), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, /* CarrolTouch 4000U */ { USB_DEVICE(0x04e7, 0x0009), .driver_info = USB_QUIRK_RESET_RESUME }, /* CarrolTouch 4500U */ { USB_DEVICE(0x04e7, 0x0030), .driver_info = USB_QUIRK_RESET_RESUME }, /* Samsung Android phone modem - ID conflict with SPH-I500 */ { USB_DEVICE(0x04e8, 0x6601), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, /* Elan Touchscreen */ { USB_DEVICE(0x04f3, 0x0089), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, { USB_DEVICE(0x04f3, 0x009b), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, { USB_DEVICE(0x04f3, 0x010c), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, { USB_DEVICE(0x04f3, 0x0125), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, { USB_DEVICE(0x04f3, 0x016f), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, { USB_DEVICE(0x04f3, 0x0381), .driver_info = USB_QUIRK_NO_LPM }, { USB_DEVICE(0x04f3, 0x21b8), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, /* Edirol SD-20 */ { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, /* Alcor Micro Corp. Hub */ { USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME }, /* appletouch */ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, /* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */ { USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM }, /* ELSA MicroLink 56K */ { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_RESET_RESUME }, /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */ { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM }, /* Avision AV600U */ { USB_DEVICE(0x0638, 0x0a13), .driver_info = USB_QUIRK_STRING_FETCH_255 }, /* Saitek Cyborg Gold Joystick */ { USB_DEVICE(0x06a3, 0x0006), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, /* Agfa SNAPSCAN 1212U */ { USB_DEVICE(0x06bd, 0x0001), .driver_info = USB_QUIRK_RESET_RESUME }, /* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */ { USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME }, /* Guillemot Webcam Hercules Dualpix Exchange*/ { USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME }, /* Guillemot Hercules DJ Console audio card (BZ 208357) */ { USB_DEVICE(0x06f8, 0xb000), .driver_info = USB_QUIRK_ENDPOINT_BLACKLIST }, /* Midiman M-Audio Keystation 88es */ { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME }, /* SanDisk Ultra Fit and Ultra Flair */ { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM }, { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM }, /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, /* Baum Vario Ultra */ { USB_DEVICE(0x0904, 0x6101), .driver_info = USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL }, { USB_DEVICE(0x0904, 0x6102), .driver_info = USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL }, { USB_DEVICE(0x0904, 0x6103), .driver_info = USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL }, /* Keytouch QWERTY Panel keyboard */ { USB_DEVICE(0x0926, 0x3333), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, /* Kingston DataTraveler 3.0 */ { USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM }, /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, /* ELMO L-12F document camera */ { USB_DEVICE(0x09a1, 0x0028), .driver_info = USB_QUIRK_DELAY_CTRL_MSG }, /* Broadcom BCM92035DGROM BT dongle */ { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME }, /* MAYA44USB sound device */ { USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME }, /* ASUS Base Station(T100) */ { USB_DEVICE(0x0b05, 0x17e0), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP }, /* Realtek hub in Dell WD19 (Type-C) */ { USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM }, { USB_DEVICE(0x0bda, 0x5487), .driver_info = USB_QUIRK_RESET_RESUME }, /* Generic RTL8153 based ethernet adapters */ { USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM }, /* SONiX USB DEVICE Touchpad */ { USB_DEVICE(0x0c45, 0x7056), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP }, /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, /* Verbatim */ { USB_DEVICE(0x13FE, 0x5500), .driver_info = USB_QUIRK_NO_LPM }, /* SKYMEDI USB_DRIVE */ { USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME }, /* Razer - Razer Blade Keyboard */ { USB_DEVICE(0x1532, 0x0116), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, /* Lenovo ThinkPad USB-C Dock Gen2 Ethernet (RTL8153 GigE) */ { USB_DEVICE(0x17ef, 0xa387), .driver_info = USB_QUIRK_NO_LPM }, /* BUILDWIN Photo Frame */ { USB_DEVICE(0x1908, 0x1315), .driver_info = USB_QUIRK_HONOR_BNUMINTERFACES }, /* Protocol and OTG Electrical Test Device */ { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, /* Corsair K70 RGB */ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, /* Corsair Strafe */ { USB_DEVICE(0x1b1c, 0x1b15), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, /* Corsair Strafe RGB */ { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, /* Corsair K70 LUX RGB */ { USB_DEVICE(0x1b1c, 0x1b33), .driver_info = USB_QUIRK_DELAY_INIT }, /* Corsair K70 LUX */ { USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT }, /* Corsair K70 RGB RAPDIFIRE */ { USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, /* MIDI keyboard WORLDE MINI */ { USB_DEVICE(0x1c75, 0x0204), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, /* Acer C120 LED Projector */ { USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM }, /* Blackmagic Design Intensity Shuttle */ { USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM }, /* Blackmagic Design UltraStudio SDI */ { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, /* Hauppauge HVR-950q */ { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, /* Raydium Touchscreen */ { USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM }, { USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM }, { USB_DEVICE(0x2386, 0x350e), .driver_info = USB_QUIRK_NO_LPM }, /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, /* Fibocom L850-GL LTE Modem */ { USB_DEVICE(0x2cb7, 0x0007), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP }, /* INTEL VALUE SSD */ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, /* novation SoundControl XL */ { USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME }, { } /* terminating entry must be last */ }; static const struct usb_device_id usb_interface_quirk_list[] = { /* Logitech UVC Cameras */ { USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0), .driver_info = USB_QUIRK_RESET_RESUME }, { } /* terminating entry must be last */ }; static const struct usb_device_id usb_amd_resume_quirk_list[] = { /* Lenovo Mouse with Pixart controller */ { USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME }, /* Pixart Mouse */ { USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME }, { USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME }, { USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME }, { USB_DEVICE(0x03f0, 0x2b4a), .driver_info = USB_QUIRK_RESET_RESUME }, /* Logitech Optical Mouse M90/M100 */ { USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME }, { } /* terminating entry must be last */ }; /* * Entries for blacklisted endpoints that should be ignored when parsing * configuration descriptors. * * Matched for devices with USB_QUIRK_ENDPOINT_BLACKLIST. */ static const struct usb_device_id usb_endpoint_blacklist[] = { { USB_DEVICE_INTERFACE_NUMBER(0x06f8, 0xb000, 5), .driver_info = 0x01 }, { USB_DEVICE_INTERFACE_NUMBER(0x06f8, 0xb000, 5), .driver_info = 0x81 }, { } }; bool usb_endpoint_is_blacklisted(struct usb_device *udev, struct usb_host_interface *intf, struct usb_endpoint_descriptor *epd) { const struct usb_device_id *id; unsigned int address; for (id = usb_endpoint_blacklist; id->match_flags; ++id) { if (!usb_match_device(udev, id)) continue; if (!usb_match_one_id_intf(udev, intf, id)) continue; address = id->driver_info; if (address == epd->bEndpointAddress) return true; } return false; } static bool usb_match_any_interface(struct usb_device *udev, const struct usb_device_id *id) { unsigned int i; for (i = 0; i < udev->descriptor.bNumConfigurations; ++i) { struct usb_host_config *cfg = &udev->config[i]; unsigned int j; for (j = 0; j < cfg->desc.bNumInterfaces; ++j) { struct usb_interface_cache *cache; struct usb_host_interface *intf; cache = cfg->intf_cache[j]; if (cache->num_altsetting == 0) continue; intf = &cache->altsetting[0]; if (usb_match_one_id_intf(udev, intf, id)) return true; } } return false; } static int usb_amd_resume_quirk(struct usb_device *udev) { struct usb_hcd *hcd; hcd = bus_to_hcd(udev->bus); /* The device should be attached directly to root hub */ if (udev->level == 1 && hcd->amd_resume_bug == 1) return 1; return 0; } static u32 __usb_detect_quirks(struct usb_device *udev, const struct usb_device_id *id) { u32 quirks = 0; for (; id->match_flags; id++) { if (!usb_match_device(udev, id)) continue; if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_INFO) && !usb_match_any_interface(udev, id)) continue; quirks |= (u32)(id->driver_info); } return quirks; } /* * Detect any quirks the device has, and do any housekeeping for it if needed. */ void usb_detect_quirks(struct usb_device *udev) { udev->quirks = __usb_detect_quirks(udev, usb_quirk_list); /* * Pixart-based mice would trigger remote wakeup issue on AMD * Yangtze chipset, so set them as RESET_RESUME flag. */ if (usb_amd_resume_quirk(udev)) udev->quirks |= __usb_detect_quirks(udev, usb_amd_resume_quirk_list); if (udev->quirks) dev_dbg(&udev->dev, "USB quirks for this device: %x\n", udev->quirks); #ifdef CONFIG_USB_DEFAULT_PERSIST if (!(udev->quirks & USB_QUIRK_RESET)) udev->persist_enabled = 1; #else /* Hubs are automatically enabled for USB-PERSIST */ if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) udev->persist_enabled = 1; #endif /* CONFIG_USB_DEFAULT_PERSIST */ } void usb_detect_interface_quirks(struct usb_device *udev) { u32 quirks; quirks = __usb_detect_quirks(udev, usb_interface_quirk_list); if (quirks == 0) return; dev_dbg(&udev->dev, "USB interface quirks for this device: %x\n", quirks); udev->quirks |= quirks; }