--- zzzz-none-000/linux-4.4.271/arch/mips/ath79/Kconfig 2021-06-03 06:22:09.000000000 +0000 +++ hawkeye-5590-750/linux-4.4.271/arch/mips/ath79/Kconfig 2023-04-19 10:22:28.000000000 +0000 @@ -5,33 +5,241 @@ config ATH79_MACH_AP121 bool "Atheros AP121 reference board" select SOC_AR933X + select ATH79_DEV_ETH select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI + select ATH79_DEV_M25P80 select ATH79_DEV_USB select ATH79_DEV_WMAC help Say 'Y' here if you want your kernel to support the Atheros AP121 reference board. +config ATH79_MACH_AVM_GENERIC + def_bool n + +config ATH79_DEV_TARPLUGIN + def_bool n + +config ATH79_MACH_AVM_HW200 + bool "AVM Fritz WlanRepeater 450E (HW200)" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + help + Say 'Y' here if you want your kernel to support the + AVM FritzRepeater 450E. + +config ATH79_MACH_AVM_HW205 + bool "AVM Fritz WlanRepeater DVB-C (HW205)" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + help + Say 'Y' here if you want your kernel to support the + AVM FritzRepeater DVB-C. + +config ATH79_MACH_AVM_HW206 + bool "AVM Fritz WlanRepeater 1750E (HW206)" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + help + Say 'Y' here if you want your kernel to support the + AVM FritzRepeater 1750E. + +config ATH79_MACH_AVM_HW214 + bool "AVM Fritz!Box 6820 LTE (HW214)" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + help + Say 'Y' here if you want your kernel to support the + AVM Fritz!Box 6820 LTE. + +config ATH79_MACH_AVM_HW254 + bool "AVM Fritz!Box 6820v3 LTE (HW254)" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + select ATH79_DEV_TARPLUGIN + help + Say 'Y' here if you want your kernel to support the + AVM Fritz!Box 6820v3 LTE. + +config ATH79_MACH_AVM_HW215 + bool "AVM Fritz!Repeater 310v2" + select SOC_QCA953X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + help + Say 'Y' here if you want your kernel to support the + AVM Fritz!Repeater 310 v2. + +config ATH79_MACH_AVM_HW216 + bool "AVM Fritz!Repeater 1160" + select SOC_QCA953X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + help + Say 'Y' here if you want your kernel to support the + AVM Fritz!Repeater 1160. + +config ATH79_MACH_AVM_HW219 + bool "AVM Fritz!Box 4020 (HW219)" + select SOC_QCA956X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + help + Say 'Y' here if you want your kernel to support the + AVM Fritz!Box 4020. + +config ATH79_MACH_AVM_HW222 + bool "AVM Fritz!Powerline 1240E" + select SOC_QCA953X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + help + Say 'Y' here if you want your kernel to support the + AVM Fritz!Powerline 1240E. + +config ATH79_MACH_AVM_HW238 + bool "AVM FritzBox 7490 OffloadTarget (HW238)" + select SOC_QCA955X + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + help + Say 'Y' here if you want your kernel to support the + AVM 7490 Offload Target. + +config ATH79_MACH_AVM_HW240 + bool "AVM Fritz WlanRepeater 600 or 2400 (HW240/HW241)" + select SOC_QCN550X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + help + Say 'Y' here if you want your kernel to support the + AVM FritzRepeater 600 or 2400. + +config ATH79_MACH_AVM_WASP + bool "AVM WASP (Repeater 310, Powerline 540E/546E)" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_MACH_AVM_GENERIC + help + Say 'Y' here if you want your kernel to support the + AVM WASP Platforms like Repeater 310 and Powerline 540E or 546E. + +config ATH79_MACH_AP135 + bool "Qualcomm Atheros AP135 reference board" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_DEV_ETH + help + Say 'Y' here if you want your kernel to support the + Qualcomm Atheros AP135 reference board. + +config ATH79_MACH_AP135_DUAL + bool "Qualcomm Atheros AP135 Dual reference board" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_NAND + select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Qualcomm Atheros AP135 Dual reference board. + +config ATH79_MACH_AP137 + bool "Qualcomm Atheros AP137 reference board" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Qualcomm Atheros AP135 reference board. + config ATH79_MACH_AP136 - bool "Atheros AP136 reference board" + bool "Atheros AP136/AP135 reference board" select SOC_QCA955X select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_NFC select ATH79_DEV_SPI select ATH79_DEV_USB select ATH79_DEV_WMAC help Say 'Y' here if you want your kernel to support the - Atheros AP136 reference board. + Atheros AP136 or AP135 reference boards. config ATH79_MACH_AP81 bool "Atheros AP81 reference board" select SOC_AR913X + select ATH79_DEV_ETH select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI + select ATH79_DEV_M25P80 select ATH79_DEV_USB select ATH79_DEV_WMAC help @@ -41,9 +249,12 @@ config ATH79_MACH_DB120 bool "Atheros DB120 reference board" select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI + select ATH79_DEV_M25P80 + select ATH79_DEV_NFC select ATH79_DEV_USB select ATH79_DEV_WMAC help @@ -53,6 +264,7 @@ config ATH79_MACH_PB44 bool "Atheros PB44 reference board" select SOC_AR71XX + select ATH79_DEV_ETH select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO select ATH79_DEV_SPI @@ -62,11 +274,16 @@ Atheros PB44 reference board. config ATH79_MACH_UBNT_XM - bool "Ubiquiti Networks XM (rev 1.0) board" + bool "Ubiquiti Networks XM/UniFi boards" select SOC_AR724X + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC help Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -83,6 +300,15 @@ select SOC_AR913X endchoice +config AVM_PCI_RECOVERY + bool "AVM PCI Recovery on link down" + depends on PCI_AR724X + help + Enables the reset of the root complex once a link error + has been detected. + +source "arch/mips/ath79/Kconfig.openwrt" + endmenu config SOC_AR71XX @@ -103,11 +329,55 @@ config SOC_AR934X select HW_HAS_PCI select PCI_AR724X if PCI + select AVM_ARCH_NMI_BROKEN + select CPU_HAS_DSP_ASE + def_bool n + +config SOC_QCA953X + select USB_ARCH_HAS_EHCI + select HW_HAS_PCI + select PCI_AR724X if PCI + select AVM_ARCH_NMI_BROKEN def_bool n config SOC_QCA955X select HW_HAS_PCI select PCI_AR724X if PCI + select AVM_ARCH_NMI_BROKEN + select CPU_HAS_DSP_ASE + def_bool n + +config SOC_QCA956X + select USB_ARCH_HAS_EHCI + select HW_HAS_PCI + select PCI_AR724X if PCI + select CPU_HAS_DSP_ASE + def_bool n + +config SOC_QCN550X + select USB_ARCH_HAS_EHCI + select HW_HAS_PCI + select PCI_AR724X if PCI + def_bool n + +config SOC_QCN550X + select USB_ARCH_HAS_EHCI + select HW_HAS_PCI + select PCI_AR724X if PCI + def_bool n + +config ATH79_DEV_M25P80 + select ATH79_DEV_SPI + def_bool n + +config ATH79_DEV_AP9X_PCI + select ATH79_PCI_ATH9K_FIXUP + def_bool n + +config ATH79_DEV_DSA + def_bool n + +config ATH79_DEV_ETH def_bool n config PCI_AR724X @@ -119,6 +389,14 @@ config ATH79_DEV_LEDS_GPIO def_bool n +config ATH79_DEV_NFC + depends on (SOC_AR934X || SOC_QCA955X) + def_bool n + +config ATH79_DEV_NAND + select ATH79_NAND_CALDATA_FIXUP + def_bool n + config ATH79_DEV_SPI def_bool n @@ -126,7 +404,19 @@ def_bool n config ATH79_DEV_WMAC - depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) + depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X || SOC_QCN550X) + def_bool n + +config ATH79_NVRAM + def_bool n + +config ATH79_PCI_ATH9K_FIXUP + def_bool n + +config ATH79_ROUTERBOOT + def_bool n + +config AVM_ARCH_NMI_BROKEN def_bool n endif