--- zzzz-none-000/linux-4.4.271/drivers/remoteproc/Kconfig 2021-06-03 06:22:09.000000000 +0000 +++ hawkeye-5590-750/linux-4.4.271/drivers/remoteproc/Kconfig 2023-04-19 10:22:29.000000000 +0000 @@ -2,49 +2,84 @@ # REMOTEPROC gets selected by whoever wants it config REMOTEPROC - tristate + tristate "Support for Remote Processor subsystem" depends on HAS_DMA select CRC32 select FW_LOADER select VIRTIO select VIRTUALIZATION + select WANT_DEV_COREDUMP + help + Support for remote processors (such as DSP coprocessors). These + are mainly used on embedded systems. + +config IPQ807X_REMOTEPROC + tristate "IPQ807x Q6-WCSS rproc support" + depends on REMOTEPROC && QCOM_SMP2P + select IPQ_SUBSYTEM_DUMP + select QCOM_MDT_LOADER + select QCOM_SCM + help + Say y here to support IPQ807x q6v5 wcss remote processors + via the remote processor framework. Q6v5 WCSS are DSP remote + processors. They need reset and loading of firmware for them + to run. This config enables drivers to do that. + +config IPQ_REMOTEPROC_ADSP + tristate "IPQ Q6-ADSP rproc support" + depends on REMOTEPROC && QCOM_SMP2P + select IPQ_SUBSYSTEM_DUMP + select QCOM_MDT_LOADER + select QCOM_SCM + help + Say y here to support IPQ q6v6 adsp remote processors + via the remote processor framework. Q6v6 ADSP are DSP remote + processors. They need reset and loading of firmware for them + to run. This config enables drivers to do that. + +config STE_MODEM_RPROC + tristate "STE-Modem remoteproc support" + depends on HAS_DMA + select REMOTEPROC + default n + help + Say y or m here to support STE-Modem shared memory driver. + This can be either built-in or a loadable module. + If unsure say N. + +if REMOTEPROC + +config IMX_REMOTEPROC + tristate "IMX6/7 remoteproc support" + depends on SOC_IMX6SX || SOC_IMX7D + help + Say y here to support iMX's remote processors (Cortex M4 + on iMX7D) via the remote processor framework. + + It's safe to say N here. config OMAP_REMOTEPROC tristate "OMAP remoteproc support" - depends on HAS_DMA depends on ARCH_OMAP4 || SOC_OMAP5 depends on OMAP_IOMMU - select REMOTEPROC select MAILBOX select OMAP2PLUS_MBOX - select RPMSG help Say y here to support OMAP's remote processors (dual M3 and DSP on OMAP4) via the remote processor framework. Currently only supported on OMAP4. - Usually you want to say y here, in order to enable multimedia + Usually you want to say Y here, in order to enable multimedia use-cases to run on your platform (multimedia codecs are offloaded to remote DSP processors using this framework). - It's safe to say n here if you're not interested in multimedia + It's safe to say N here if you're not interested in multimedia offloading or just want a bare minimum kernel. -config STE_MODEM_RPROC - tristate "STE-Modem remoteproc support" - depends on HAS_DMA - select REMOTEPROC - default n - help - Say y or m here to support STE-Modem shared memory driver. - This can be either built-in or a loadable module. - If unsure say N. - config WKUP_M3_RPROC tristate "AMx3xx Wakeup M3 remoteproc support" depends on SOC_AM33XX || SOC_AM43XX - select REMOTEPROC help Say y here to support Wakeup M3 remote processor on TI AM33xx and AM43xx family of SoCs. @@ -57,9 +92,7 @@ config DA8XX_REMOTEPROC tristate "DA8xx/OMAP-L13x remoteproc support" depends on ARCH_DAVINCI_DA8XX - select CMA if MMU - select REMOTEPROC - select RPMSG + depends on DMA_CMA help Say y here to support DA8xx/OMAP-L13x remote processors via the remote processor framework. @@ -77,4 +110,84 @@ It's safe to say n here if you're not interested in multimedia offloading. +config KEYSTONE_REMOTEPROC + tristate "Keystone Remoteproc support" + depends on ARCH_KEYSTONE + help + Say Y here here to support Keystone remote processors (DSP) + via the remote processor framework. + + It's safe to say N here if you're not interested in the Keystone + DSPs or just want to use a bare minimum kernel. + +config QCOM_RPROC_COMMON + tristate + +config QCOM_Q6V5_COMMON + tristate + depends on ARCH_QCOM + depends on QCOM_SMEM + +config QTI_Q6V5_ADSP + tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader" + depends on OF && ARCH_QCOM + depends on QCOM_SMEM + depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n) + depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n + depends on QCOM_SYSMON || QCOM_SYSMON=n + select MFD_SYSCON + select QCOM_MDT_LOADER + select QCOM_Q6V5_COMMON + select QCOM_RPROC_COMMON + help + Say y here to support the Peripheral Image Loader + for the Qualcomm Technology Inc. ADSP remote processors. + +config QCOM_Q6V5_WCSS + tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader" + depends on OF && ARCH_QCOM + depends on QCOM_SMEM + depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n) + depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n + depends on QCOM_SYSMON || QCOM_SYSMON=n + select MFD_SYSCON + select QCOM_MDT_LOADER + select QCOM_Q6V5_COMMON + select QCOM_RPROC_COMMON + select QCOM_SCM + select IPQ_SS_DUMP + help + Say y here to support the Qualcomm Peripheral Image Loader for the + Hexagon V5 based WCSS remote processors. + +config QCOM_SYSMON + tristate "Qualcomm sysmon driver" + depends on RPMSG + depends on ARCH_QCOM + depends on NET + select QCOM_QMI_HELPERS + help + The sysmon driver implements a sysmon QMI client and a handler for + the sys_mon SMD and GLINK channel, which are used for graceful + shutdown, retrieving failure information and propagating information + about other subsystems being shut down. + + Say y here if your system runs firmware on any other subsystems, e.g. + modem or DSP. + +config ST_REMOTEPROC + tristate "ST remoteproc support" + depends on ARCH_STI + select MAILBOX + select STI_MBOX + help + Say y here to support ST's adjunct processors via the remote + processor framework. + This can be either built-in or a loadable module. + +config ST_SLIM_REMOTEPROC + tristate + +endif # REMOTEPROC + endmenu