--- zzzz-none-000/linux-4.4.271/drivers/rpmsg/virtio_rpmsg_bus.c 2021-06-03 06:22:09.000000000 +0000 +++ hawkeye-5590-750/linux-4.4.271/drivers/rpmsg/virtio_rpmsg_bus.c 2023-04-19 10:22:29.000000000 +0000 @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Virtio-based remote processor messaging bus * @@ -6,15 +7,6 @@ * * Ohad Ben-Cohen * Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #define pr_fmt(fmt) "%s: " fmt, __func__ @@ -33,6 +25,9 @@ #include #include #include +#include + +#include "rpmsg_internal.h" /** * struct virtproc_info - virtual remote processor state @@ -42,6 +37,7 @@ * @rbufs: kernel address of rx buffers * @sbufs: kernel address of tx buffers * @num_bufs: total number of buffers for rx and tx + * @buf_size: size of one rx or tx buffer * @last_sbuf: index of last tx buffer used * @bufs_dma: dma base addr of the buffers * @tx_lock: protects svq, sbufs and sleepers, to allow concurrent senders. @@ -62,6 +58,7 @@ struct virtqueue *rvq, *svq; void *rbufs, *sbufs; unsigned int num_bufs; + unsigned int buf_size; int last_sbuf; dma_addr_t bufs_dma; struct mutex tx_lock; @@ -72,20 +69,69 @@ struct rpmsg_endpoint *ns_ept; }; +/* The feature bitmap for virtio rpmsg */ +#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */ + /** - * struct rpmsg_channel_info - internal channel info representation - * @name: name of service - * @src: local address + * struct rpmsg_hdr - common header for all rpmsg messages + * @src: source address * @dst: destination address + * @reserved: reserved for future use + * @len: length of payload (in bytes) + * @flags: message flags + * @data: @len bytes of message payload data + * + * Every message sent(/received) on the rpmsg bus begins with this header. */ -struct rpmsg_channel_info { - char name[RPMSG_NAME_SIZE]; +struct rpmsg_hdr { u32 src; u32 dst; + u32 reserved; + u16 len; + u16 flags; + u8 data[0]; +} __packed; + +/** + * struct rpmsg_ns_msg - dynamic name service announcement message + * @name: name of remote service that is published + * @addr: address of remote service that is published + * @flags: indicates whether service is created or destroyed + * + * This message is sent across to publish a new service, or announce + * about its removal. When we receive these messages, an appropriate + * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe() + * or ->remove() handler of the appropriate rpmsg driver will be invoked + * (if/as-soon-as one is registered). + */ +struct rpmsg_ns_msg { + char name[RPMSG_NAME_SIZE]; + u32 addr; + u32 flags; +} __packed; + +/** + * enum rpmsg_ns_flags - dynamic name service announcement flags + * + * @RPMSG_NS_CREATE: a new remote service was just created + * @RPMSG_NS_DESTROY: a known remote service was just destroyed + */ +enum rpmsg_ns_flags { + RPMSG_NS_CREATE = 0, + RPMSG_NS_DESTROY = 1, }; -#define to_rpmsg_channel(d) container_of(d, struct rpmsg_channel, dev) -#define to_rpmsg_driver(d) container_of(d, struct rpmsg_driver, drv) +/** + * @vrp: the remote processor this channel belongs to + */ +struct virtio_rpmsg_channel { + struct rpmsg_device rpdev; + + struct virtproc_info *vrp; +}; + +#define to_virtio_rpmsg_channel(_rpdev) \ + container_of(_rpdev, struct virtio_rpmsg_channel, rpdev) /* * We're allocating buffers of 512 bytes each for communications. The @@ -106,7 +152,7 @@ * processor. */ #define MAX_RPMSG_NUM_BUFS (512) -#define RPMSG_BUF_SIZE (512) +#define MAX_RPMSG_BUF_SIZE (512) /* * Local addresses are dynamically allocated on-demand. @@ -118,76 +164,48 @@ /* Address 53 is reserved for advertising remote services */ #define RPMSG_NS_ADDR (53) -/* sysfs show configuration fields */ -#define rpmsg_show_attr(field, path, format_string) \ -static ssize_t \ -field##_show(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - struct rpmsg_channel *rpdev = to_rpmsg_channel(dev); \ - \ - return sprintf(buf, format_string, rpdev->path); \ -} - -/* for more info, see Documentation/ABI/testing/sysfs-bus-rpmsg */ -rpmsg_show_attr(name, id.name, "%s\n"); -rpmsg_show_attr(src, src, "0x%x\n"); -rpmsg_show_attr(dst, dst, "0x%x\n"); -rpmsg_show_attr(announce, announce ? "true" : "false", "%s\n"); +static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept); +static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len); +static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, + u32 dst); +static int virtio_rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, + u32 dst, void *data, int len); +static int virtio_rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len); +static int virtio_rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, + int len, u32 dst); +static int virtio_rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, + u32 dst, void *data, int len); + +static const struct rpmsg_endpoint_ops virtio_endpoint_ops = { + .destroy_ept = virtio_rpmsg_destroy_ept, + .send = virtio_rpmsg_send, + .sendto = virtio_rpmsg_sendto, + .send_offchannel = virtio_rpmsg_send_offchannel, + .trysend = virtio_rpmsg_trysend, + .trysendto = virtio_rpmsg_trysendto, + .trysend_offchannel = virtio_rpmsg_trysend_offchannel, +}; -/* - * Unique (and free running) index for rpmsg devices. +/** + * rpmsg_sg_init - initialize scatterlist according to cpu address location + * @sg: scatterlist to fill + * @cpu_addr: virtual address of the buffer + * @len: buffer length * - * Yeah, we're not recycling those numbers (yet?). will be easy - * to change if/when we want to. + * An internal function filling scatterlist according to virtual address + * location (in vmalloc or in kernel). */ -static unsigned int rpmsg_dev_index; - -static ssize_t modalias_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct rpmsg_channel *rpdev = to_rpmsg_channel(dev); - - return sprintf(buf, RPMSG_DEVICE_MODALIAS_FMT "\n", rpdev->id.name); -} - -static struct device_attribute rpmsg_dev_attrs[] = { - __ATTR_RO(name), - __ATTR_RO(modalias), - __ATTR_RO(dst), - __ATTR_RO(src), - __ATTR_RO(announce), - __ATTR_NULL -}; - -/* rpmsg devices and drivers are matched using the service name */ -static inline int rpmsg_id_match(const struct rpmsg_channel *rpdev, - const struct rpmsg_device_id *id) -{ - return strncmp(id->name, rpdev->id.name, RPMSG_NAME_SIZE) == 0; -} - -/* match rpmsg channel and rpmsg driver */ -static int rpmsg_dev_match(struct device *dev, struct device_driver *drv) -{ - struct rpmsg_channel *rpdev = to_rpmsg_channel(dev); - struct rpmsg_driver *rpdrv = to_rpmsg_driver(drv); - const struct rpmsg_device_id *ids = rpdrv->id_table; - unsigned int i; - - for (i = 0; ids[i].name[0]; i++) - if (rpmsg_id_match(rpdev, &ids[i])) - return 1; - - return 0; -} - -static int rpmsg_uevent(struct device *dev, struct kobj_uevent_env *env) +static void +rpmsg_sg_init(struct scatterlist *sg, void *cpu_addr, unsigned int len) { - struct rpmsg_channel *rpdev = to_rpmsg_channel(dev); - - return add_uevent_var(env, "MODALIAS=" RPMSG_DEVICE_MODALIAS_FMT, - rpdev->id.name); + if (is_vmalloc_addr(cpu_addr)) { + sg_init_table(sg, 1); + sg_set_page(sg, vmalloc_to_page(cpu_addr), len, + offset_in_page(cpu_addr)); + } else { + WARN_ON(!virt_addr_valid(cpu_addr)); + sg_init_one(sg, cpu_addr, len); + } } /** @@ -212,18 +230,17 @@ /* for more info, see below documentation of rpmsg_create_ept() */ static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp, - struct rpmsg_channel *rpdev, rpmsg_rx_cb_t cb, - void *priv, u32 addr) + struct rpmsg_device *rpdev, + rpmsg_rx_cb_t cb, + void *priv, u32 addr) { int id_min, id_max, id; struct rpmsg_endpoint *ept; struct device *dev = rpdev ? &rpdev->dev : &vrp->vdev->dev; ept = kzalloc(sizeof(*ept), GFP_KERNEL); - if (!ept) { - dev_err(dev, "failed to kzalloc a new ept\n"); + if (!ept) return NULL; - } kref_init(&ept->refcount); mutex_init(&ept->cb_lock); @@ -231,6 +248,7 @@ ept->rpdev = rpdev; ept->cb = cb; ept->priv = priv; + ept->ops = &virtio_endpoint_ops; /* do we need to allocate a local address ? */ if (addr == RPMSG_ADDR_ANY) { @@ -261,52 +279,15 @@ return NULL; } -/** - * rpmsg_create_ept() - create a new rpmsg_endpoint - * @rpdev: rpmsg channel device - * @cb: rx callback handler - * @priv: private data for the driver's use - * @addr: local rpmsg address to bind with @cb - * - * Every rpmsg address in the system is bound to an rx callback (so when - * inbound messages arrive, they are dispatched by the rpmsg bus using the - * appropriate callback handler) by means of an rpmsg_endpoint struct. - * - * This function allows drivers to create such an endpoint, and by that, - * bind a callback, and possibly some private data too, to an rpmsg address - * (either one that is known in advance, or one that will be dynamically - * assigned for them). - * - * Simple rpmsg drivers need not call rpmsg_create_ept, because an endpoint - * is already created for them when they are probed by the rpmsg bus - * (using the rx callback provided when they registered to the rpmsg bus). - * - * So things should just work for simple drivers: they already have an - * endpoint, their rx callback is bound to their rpmsg address, and when - * relevant inbound messages arrive (i.e. messages which their dst address - * equals to the src address of their rpmsg channel), the driver's handler - * is invoked to process it. - * - * That said, more complicated drivers might do need to allocate - * additional rpmsg addresses, and bind them to different rx callbacks. - * To accomplish that, those drivers need to call this function. - * - * Drivers should provide their @rpdev channel (so the new endpoint would belong - * to the same remote processor their channel belongs to), an rx callback - * function, an optional private data (which is provided back when the - * rx callback is invoked), and an address they want to bind with the - * callback. If @addr is RPMSG_ADDR_ANY, then rpmsg_create_ept will - * dynamically assign them an available rpmsg address (drivers should have - * a very good reason why not to always use RPMSG_ADDR_ANY here). - * - * Returns a pointer to the endpoint on success, or NULL on error. - */ -struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_channel *rpdev, - rpmsg_rx_cb_t cb, void *priv, u32 addr) +static struct rpmsg_endpoint *virtio_rpmsg_create_ept(struct rpmsg_device *rpdev, + rpmsg_rx_cb_t cb, + void *priv, + struct rpmsg_channel_info chinfo) { - return __rpmsg_create_ept(rpdev->vrp, rpdev, cb, priv, addr); + struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev); + + return __rpmsg_create_ept(vch->vrp, rpdev, cb, priv, chinfo.src); } -EXPORT_SYMBOL(rpmsg_create_ept); /** * __rpmsg_destroy_ept() - destroy an existing rpmsg endpoint @@ -334,160 +315,73 @@ kref_put(&ept->refcount, __ept_release); } -/** - * rpmsg_destroy_ept() - destroy an existing rpmsg endpoint - * @ept: endpoing to destroy - * - * Should be used by drivers to destroy an rpmsg endpoint previously - * created with rpmsg_create_ept(). - */ -void rpmsg_destroy_ept(struct rpmsg_endpoint *ept) +static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept) { - __rpmsg_destroy_ept(ept->rpdev->vrp, ept); + struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(ept->rpdev); + + __rpmsg_destroy_ept(vch->vrp, ept); } -EXPORT_SYMBOL(rpmsg_destroy_ept); -/* - * when an rpmsg driver is probed with a channel, we seamlessly create - * it an endpoint, binding its rx callback to a unique local rpmsg - * address. - * - * if we need to, we also announce about this channel to the remote - * processor (needed in case the driver is exposing an rpmsg service). - */ -static int rpmsg_dev_probe(struct device *dev) +static int virtio_rpmsg_announce_create(struct rpmsg_device *rpdev) { - struct rpmsg_channel *rpdev = to_rpmsg_channel(dev); - struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver); - struct virtproc_info *vrp = rpdev->vrp; - struct rpmsg_endpoint *ept; - int err; - - ept = rpmsg_create_ept(rpdev, rpdrv->callback, NULL, rpdev->src); - if (!ept) { - dev_err(dev, "failed to create endpoint\n"); - err = -ENOMEM; - goto out; - } - - rpdev->ept = ept; - rpdev->src = ept->addr; - - err = rpdrv->probe(rpdev); - if (err) { - dev_err(dev, "%s: failed: %d\n", __func__, err); - rpmsg_destroy_ept(ept); - goto out; - } + struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev); + struct virtproc_info *vrp = vch->vrp; + struct device *dev = &rpdev->dev; + int err = 0; /* need to tell remote processor's name service about this channel ? */ - if (rpdev->announce && - virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) { + if (rpdev->announce && rpdev->ept && + virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) { struct rpmsg_ns_msg nsm; strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE); - nsm.addr = rpdev->src; + nsm.addr = rpdev->ept->addr; nsm.flags = RPMSG_NS_CREATE; - err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), RPMSG_NS_ADDR); + err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR); if (err) dev_err(dev, "failed to announce service %d\n", err); } -out: return err; } -static int rpmsg_dev_remove(struct device *dev) +static int virtio_rpmsg_announce_destroy(struct rpmsg_device *rpdev) { - struct rpmsg_channel *rpdev = to_rpmsg_channel(dev); - struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver); - struct virtproc_info *vrp = rpdev->vrp; + struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev); + struct virtproc_info *vrp = vch->vrp; + struct device *dev = &rpdev->dev; int err = 0; /* tell remote processor's name service we're removing this channel */ - if (rpdev->announce && - virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) { + if (rpdev->announce && rpdev->ept && + virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) { struct rpmsg_ns_msg nsm; strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE); - nsm.addr = rpdev->src; + nsm.addr = rpdev->ept->addr; nsm.flags = RPMSG_NS_DESTROY; - err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), RPMSG_NS_ADDR); + err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR); if (err) dev_err(dev, "failed to announce service %d\n", err); } - rpdrv->remove(rpdev); - - rpmsg_destroy_ept(rpdev->ept); - return err; } -static struct bus_type rpmsg_bus = { - .name = "rpmsg", - .match = rpmsg_dev_match, - .dev_attrs = rpmsg_dev_attrs, - .uevent = rpmsg_uevent, - .probe = rpmsg_dev_probe, - .remove = rpmsg_dev_remove, +static const struct rpmsg_device_ops virtio_rpmsg_ops = { + .create_ept = virtio_rpmsg_create_ept, + .announce_create = virtio_rpmsg_announce_create, + .announce_destroy = virtio_rpmsg_announce_destroy, }; -/** - * register_rpmsg_driver() - register an rpmsg driver with the rpmsg bus - * @rpdrv: pointer to a struct rpmsg_driver - * - * Returns 0 on success, and an appropriate error value on failure. - */ -int register_rpmsg_driver(struct rpmsg_driver *rpdrv) -{ - rpdrv->drv.bus = &rpmsg_bus; - return driver_register(&rpdrv->drv); -} -EXPORT_SYMBOL(register_rpmsg_driver); - -/** - * unregister_rpmsg_driver() - unregister an rpmsg driver from the rpmsg bus - * @rpdrv: pointer to a struct rpmsg_driver - * - * Returns 0 on success, and an appropriate error value on failure. - */ -void unregister_rpmsg_driver(struct rpmsg_driver *rpdrv) +static void virtio_rpmsg_release_device(struct device *dev) { - driver_unregister(&rpdrv->drv); -} -EXPORT_SYMBOL(unregister_rpmsg_driver); + struct rpmsg_device *rpdev = to_rpmsg_device(dev); + struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev); -static void rpmsg_release_device(struct device *dev) -{ - struct rpmsg_channel *rpdev = to_rpmsg_channel(dev); - - kfree(rpdev); -} - -/* - * match an rpmsg channel with a channel info struct. - * this is used to make sure we're not creating rpmsg devices for channels - * that already exist. - */ -static int rpmsg_channel_match(struct device *dev, void *data) -{ - struct rpmsg_channel_info *chinfo = data; - struct rpmsg_channel *rpdev = to_rpmsg_channel(dev); - - if (chinfo->src != RPMSG_ADDR_ANY && chinfo->src != rpdev->src) - return 0; - - if (chinfo->dst != RPMSG_ADDR_ANY && chinfo->dst != rpdev->dst) - return 0; - - if (strncmp(chinfo->name, rpdev->id.name, RPMSG_NAME_SIZE)) - return 0; - - /* found a match ! */ - return 1; + kfree(vch); } /* @@ -495,15 +389,16 @@ * this function will be used to create both static and dynamic * channels. */ -static struct rpmsg_channel *rpmsg_create_channel(struct virtproc_info *vrp, - struct rpmsg_channel_info *chinfo) +static struct rpmsg_device *rpmsg_create_channel(struct virtproc_info *vrp, + struct rpmsg_channel_info *chinfo) { - struct rpmsg_channel *rpdev; + struct virtio_rpmsg_channel *vch; + struct rpmsg_device *rpdev; struct device *tmp, *dev = &vrp->vdev->dev; int ret; /* make sure a similar channel doesn't already exist */ - tmp = device_find_child(dev, chinfo, rpmsg_channel_match); + tmp = rpmsg_find_device(dev, chinfo); if (tmp) { /* decrement the matched device's refcount back */ put_device(tmp); @@ -512,62 +407,36 @@ return NULL; } - rpdev = kzalloc(sizeof(struct rpmsg_channel), GFP_KERNEL); - if (!rpdev) { - pr_err("kzalloc failed\n"); + vch = kzalloc(sizeof(*vch), GFP_KERNEL); + if (!vch) return NULL; - } - rpdev->vrp = vrp; + /* Link the channel to our vrp */ + vch->vrp = vrp; + + /* Assign public information to the rpmsg_device */ + rpdev = &vch->rpdev; rpdev->src = chinfo->src; rpdev->dst = chinfo->dst; + rpdev->ops = &virtio_rpmsg_ops; /* * rpmsg server channels has predefined local address (for now), * and their existence needs to be announced remotely */ - rpdev->announce = rpdev->src != RPMSG_ADDR_ANY ? true : false; + rpdev->announce = rpdev->src != RPMSG_ADDR_ANY; strncpy(rpdev->id.name, chinfo->name, RPMSG_NAME_SIZE); - /* very simple device indexing plumbing which is enough for now */ - dev_set_name(&rpdev->dev, "rpmsg%d", rpmsg_dev_index++); - rpdev->dev.parent = &vrp->vdev->dev; - rpdev->dev.bus = &rpmsg_bus; - rpdev->dev.release = rpmsg_release_device; - - ret = device_register(&rpdev->dev); - if (ret) { - dev_err(dev, "device_register failed: %d\n", ret); - put_device(&rpdev->dev); + rpdev->dev.release = virtio_rpmsg_release_device; + ret = rpmsg_register_device(rpdev); + if (ret) return NULL; - } return rpdev; } -/* - * find an existing channel using its name + address properties, - * and destroy it - */ -static int rpmsg_destroy_channel(struct virtproc_info *vrp, - struct rpmsg_channel_info *chinfo) -{ - struct virtio_device *vdev = vrp->vdev; - struct device *dev; - - dev = device_find_child(&vdev->dev, chinfo, rpmsg_channel_match); - if (!dev) - return -EINVAL; - - device_unregister(dev); - - put_device(dev); - - return 0; -} - /* super simple buffer "allocator" that is just enough for now */ static void *get_a_tx_buf(struct virtproc_info *vrp) { @@ -582,7 +451,7 @@ * (half of our buffers are used for sending messages) */ if (vrp->last_sbuf < vrp->num_bufs / 2) - ret = vrp->sbufs + RPMSG_BUF_SIZE * vrp->last_sbuf++; + ret = vrp->sbufs + vrp->buf_size * vrp->last_sbuf++; /* or recycle a used one */ else ret = virtqueue_get_buf(vrp->svq, &len); @@ -682,10 +551,12 @@ * * Returns 0 on success and an appropriate error value on failure. */ -int rpmsg_send_offchannel_raw(struct rpmsg_channel *rpdev, u32 src, u32 dst, - void *data, int len, bool wait) +static int rpmsg_send_offchannel_raw(struct rpmsg_device *rpdev, + u32 src, u32 dst, + void *data, int len, bool wait) { - struct virtproc_info *vrp = rpdev->vrp; + struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev); + struct virtproc_info *vrp = vch->vrp; struct device *dev = &rpdev->dev; struct scatterlist sg; struct rpmsg_hdr *msg; @@ -706,7 +577,7 @@ * messaging), or to improve the buffer allocator, to support * variable-length buffer sizes. */ - if (len > RPMSG_BUF_SIZE - sizeof(struct rpmsg_hdr)) { + if (len > vrp->buf_size - sizeof(struct rpmsg_hdr)) { dev_err(dev, "message is too big (%d)\n", len); return -EMSGSIZE; } @@ -749,12 +620,13 @@ memcpy(msg->data, data, len); dev_dbg(dev, "TX From 0x%x, To 0x%x, Len %d, Flags %d, Reserved %d\n", - msg->src, msg->dst, msg->len, - msg->flags, msg->reserved); - print_hex_dump(KERN_DEBUG, "rpmsg_virtio TX: ", DUMP_PREFIX_NONE, 16, 1, - msg, sizeof(*msg) + msg->len, true); + msg->src, msg->dst, msg->len, msg->flags, msg->reserved); +#if defined(CONFIG_DYNAMIC_DEBUG) + dynamic_hex_dump("rpmsg_virtio TX: ", DUMP_PREFIX_NONE, 16, 1, + msg, sizeof(*msg) + msg->len, true); +#endif - sg_init_one(&sg, msg, sizeof(*msg) + len); + rpmsg_sg_init(&sg, msg, sizeof(*msg) + len); mutex_lock(&vrp->tx_lock); @@ -776,7 +648,56 @@ mutex_unlock(&vrp->tx_lock); return err; } -EXPORT_SYMBOL(rpmsg_send_offchannel_raw); + +static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len) +{ + struct rpmsg_device *rpdev = ept->rpdev; + u32 src = ept->addr, dst = rpdev->dst; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); +} + +static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, + u32 dst) +{ + struct rpmsg_device *rpdev = ept->rpdev; + u32 src = ept->addr; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); +} + +static int virtio_rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, + u32 dst, void *data, int len) +{ + struct rpmsg_device *rpdev = ept->rpdev; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); +} + +static int virtio_rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len) +{ + struct rpmsg_device *rpdev = ept->rpdev; + u32 src = ept->addr, dst = rpdev->dst; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); +} + +static int virtio_rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, + int len, u32 dst) +{ + struct rpmsg_device *rpdev = ept->rpdev; + u32 src = ept->addr; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); +} + +static int virtio_rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, + u32 dst, void *data, int len) +{ + struct rpmsg_device *rpdev = ept->rpdev; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); +} static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev, struct rpmsg_hdr *msg, unsigned int len) @@ -786,17 +707,18 @@ int err; dev_dbg(dev, "From: 0x%x, To: 0x%x, Len: %d, Flags: %d, Reserved: %d\n", - msg->src, msg->dst, msg->len, - msg->flags, msg->reserved); - print_hex_dump(KERN_DEBUG, "rpmsg_virtio RX: ", DUMP_PREFIX_NONE, 16, 1, - msg, sizeof(*msg) + msg->len, true); + msg->src, msg->dst, msg->len, msg->flags, msg->reserved); +#if defined(CONFIG_DYNAMIC_DEBUG) + dynamic_hex_dump("rpmsg_virtio RX: ", DUMP_PREFIX_NONE, 16, 1, + msg, sizeof(*msg) + msg->len, true); +#endif /* * We currently use fixed-sized buffers, so trivially sanitize * the reported payload length. */ - if (len > RPMSG_BUF_SIZE || - msg->len > (len - sizeof(struct rpmsg_hdr))) { + if (len > vrp->buf_size || + msg->len > (len - sizeof(struct rpmsg_hdr))) { dev_warn(dev, "inbound msg too big: (%d, %d)\n", len, msg->len); return -EINVAL; } @@ -828,7 +750,7 @@ dev_warn(dev, "msg received with no recipient\n"); /* publish the real size of the buffer */ - sg_init_one(&sg, msg, RPMSG_BUF_SIZE); + rpmsg_sg_init(&sg, msg, vrp->buf_size); /* add the buffer back to the remote processor's virtqueue */ err = virtqueue_add_inbuf(vrp->rvq, &sg, 1, msg, GFP_KERNEL); @@ -863,7 +785,7 @@ msgs_received++; msg = virtqueue_get_buf(rvq, &len); - }; + } dev_dbg(dev, "Received %u messages\n", msgs_received); @@ -890,23 +812,24 @@ } /* invoked when a name service announcement arrives */ -static void rpmsg_ns_cb(struct rpmsg_channel *rpdev, void *data, int len, - void *priv, u32 src) +static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len, + void *priv, u32 src) { struct rpmsg_ns_msg *msg = data; - struct rpmsg_channel *newch; + struct rpmsg_device *newch; struct rpmsg_channel_info chinfo; struct virtproc_info *vrp = priv; struct device *dev = &vrp->vdev->dev; int ret; - print_hex_dump(KERN_DEBUG, "NS announcement: ", - DUMP_PREFIX_NONE, 16, 1, - data, len, true); +#if defined(CONFIG_DYNAMIC_DEBUG) + dynamic_hex_dump("NS announcement: ", DUMP_PREFIX_NONE, 16, 1, + data, len, true); +#endif if (len != sizeof(*msg)) { dev_err(dev, "malformed ns msg (%d)\n", len); - return; + return -EINVAL; } /* @@ -917,22 +840,22 @@ */ if (rpdev) { dev_err(dev, "anomaly: ns ept has an rpdev handle\n"); - return; + return -EINVAL; } /* don't trust the remote processor for null terminating the name */ msg->name[RPMSG_NAME_SIZE - 1] = '\0'; dev_info(dev, "%sing channel %s addr 0x%x\n", - msg->flags & RPMSG_NS_DESTROY ? "destroy" : "creat", - msg->name, msg->addr); + msg->flags & RPMSG_NS_DESTROY ? "destroy" : "creat", + msg->name, msg->addr); strncpy(chinfo.name, msg->name, sizeof(chinfo.name)); chinfo.src = RPMSG_ADDR_ANY; chinfo.dst = msg->addr; if (msg->flags & RPMSG_NS_DESTROY) { - ret = rpmsg_destroy_channel(vrp, &chinfo); + ret = rpmsg_unregister_device(&vrp->vdev->dev, &chinfo); if (ret) dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret); } else { @@ -940,12 +863,14 @@ if (!newch) dev_err(dev, "rpmsg_create_channel failed\n"); } + + return 0; } static int rpmsg_probe(struct virtio_device *vdev) { vq_callback_t *vq_cbs[] = { rpmsg_recv_done, rpmsg_xmit_done }; - const char *names[] = { "input", "output" }; + static const char * const names[] = { "input", "output" }; struct virtqueue *vqs[2]; struct virtproc_info *vrp; void *bufs_va; @@ -965,7 +890,7 @@ init_waitqueue_head(&vrp->sendq); /* We expect two virtqueues, rx and tx (and in this order) */ - err = vdev->config->find_vqs(vdev, 2, vqs, vq_cbs, names); + err = virtio_find_vqs(vdev, 2, vqs, vq_cbs, names, NULL); if (err) goto free_vrp; @@ -982,7 +907,9 @@ else vrp->num_bufs = MAX_RPMSG_NUM_BUFS; - total_buf_space = vrp->num_bufs * RPMSG_BUF_SIZE; + vrp->buf_size = MAX_RPMSG_BUF_SIZE; + + total_buf_space = vrp->num_bufs * vrp->buf_size; /* allocate coherent memory for the buffers */ bufs_va = dma_alloc_coherent(vdev->dev.parent->parent, @@ -993,8 +920,8 @@ goto vqs_del; } - dev_dbg(&vdev->dev, "buffers: va %p, dma 0x%llx\n", bufs_va, - (unsigned long long)vrp->bufs_dma); + dev_dbg(&vdev->dev, "buffers: va %p, dma %pad\n", + bufs_va, &vrp->bufs_dma); /* half of the buffers is dedicated for RX */ vrp->rbufs = bufs_va; @@ -1005,12 +932,12 @@ /* set up the receive buffers */ for (i = 0; i < vrp->num_bufs / 2; i++) { struct scatterlist sg; - void *cpu_addr = vrp->rbufs + i * RPMSG_BUF_SIZE; + void *cpu_addr = vrp->rbufs + i * vrp->buf_size; - sg_init_one(&sg, cpu_addr, RPMSG_BUF_SIZE); + rpmsg_sg_init(&sg, cpu_addr, vrp->buf_size); err = virtqueue_add_inbuf(vrp->rvq, &sg, 1, cpu_addr, - GFP_KERNEL); + GFP_KERNEL); WARN_ON(err); /* sanity check; this can't really happen */ } @@ -1072,7 +999,7 @@ static void rpmsg_remove(struct virtio_device *vdev) { struct virtproc_info *vrp = vdev->priv; - size_t total_buf_space = vrp->num_bufs * RPMSG_BUF_SIZE; + size_t total_buf_space = vrp->num_bufs * vrp->buf_size; int ret; vdev->config->reset(vdev); @@ -1117,17 +1044,9 @@ { int ret; - ret = bus_register(&rpmsg_bus); - if (ret) { - pr_err("failed to register rpmsg bus: %d\n", ret); - return ret; - } - ret = register_virtio_driver(&virtio_ipc_driver); - if (ret) { + if (ret) pr_err("failed to register virtio driver: %d\n", ret); - bus_unregister(&rpmsg_bus); - } return ret; } @@ -1136,7 +1055,6 @@ static void __exit rpmsg_fini(void) { unregister_virtio_driver(&virtio_ipc_driver); - bus_unregister(&rpmsg_bus); } module_exit(rpmsg_fini);