/* * Atheros PB92 board support * * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org> * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. */ #include <asm/mach-ath79/ath79.h> #include "dev-eth.h" #include "dev-gpio-buttons.h" #include "dev-m25p80.h" #include "dev-usb.h" #include "machtypes.h" #include "pci.h" #define PB92_KEYS_POLL_INTERVAL 20 /* msecs */ #define PB92_KEYS_DEBOUNCE_INTERVAL (3 * PB92_KEYS_POLL_INTERVAL) #define PB92_GPIO_BTN_SW4 8 #define PB92_GPIO_BTN_SW5 3 static struct gpio_keys_button pb92_gpio_keys[] __initdata = { { .desc = "sw4", .type = EV_KEY, .code = BTN_0, .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, .gpio = PB92_GPIO_BTN_SW4, .active_low = 1, }, { .desc = "sw5", .type = EV_KEY, .code = BTN_1, .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, .gpio = PB92_GPIO_BTN_SW5, .active_low = 1, } }; static void __init pb92_init(void) { u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); ath79_register_m25p80(NULL); ath79_register_mdio(0, ~BIT(0)); ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth0_data.speed = SPEED_1000; ath79_eth0_data.duplex = DUPLEX_FULL; ath79_eth0_data.phy_mask = BIT(0); ath79_register_eth(0); ath79_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL, ARRAY_SIZE(pb92_gpio_keys), pb92_gpio_keys); ath79_register_usb(); ath79_register_pci(); } MIPS_MACHINE(ATH79_MACH_PB92, "PB92", "Atheros PB92", pb92_init);