/* * This file is part of the Chelsio T4 Ethernet driver for Linux. * * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include #include "cxgb4.h" #include "t4_regs.h" #include "t4_values.h" #include "t4fw_api.h" #include "t4fw_version.h" /** * t4_wait_op_done_val - wait until an operation is completed * @adapter: the adapter performing the operation * @reg: the register to check for completion * @mask: a single-bit field within @reg that indicates completion * @polarity: the value of the field when the operation is completed * @attempts: number of check iterations * @delay: delay in usecs between iterations * @valp: where to store the value of the register at completion time * * Wait until an operation is completed by checking a bit in a register * up to @attempts times. If @valp is not NULL the value of the register * at the time it indicated completion is stored there. Returns 0 if the * operation completes and -EAGAIN otherwise. */ static int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask, int polarity, int attempts, int delay, u32 *valp) { while (1) { u32 val = t4_read_reg(adapter, reg); if (!!(val & mask) == polarity) { if (valp) *valp = val; return 0; } if (--attempts == 0) return -EAGAIN; if (delay) udelay(delay); } } static inline int t4_wait_op_done(struct adapter *adapter, int reg, u32 mask, int polarity, int attempts, int delay) { return t4_wait_op_done_val(adapter, reg, mask, polarity, attempts, delay, NULL); } /** * t4_set_reg_field - set a register field to a value * @adapter: the adapter to program * @addr: the register address * @mask: specifies the portion of the register to modify * @val: the new value for the register field * * Sets a register field specified by the supplied mask to the * given value. */ void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask, u32 val) { u32 v = t4_read_reg(adapter, addr) & ~mask; t4_write_reg(adapter, addr, v | val); (void) t4_read_reg(adapter, addr); /* flush */ } /** * t4_read_indirect - read indirectly addressed registers * @adap: the adapter * @addr_reg: register holding the indirect address * @data_reg: register holding the value of the indirect register * @vals: where the read register values are stored * @nregs: how many indirect registers to read * @start_idx: index of first indirect register to read * * Reads registers that are accessed indirectly through an address/data * register pair. */ void t4_read_indirect(struct adapter *adap, unsigned int addr_reg, unsigned int data_reg, u32 *vals, unsigned int nregs, unsigned int start_idx) { while (nregs--) { t4_write_reg(adap, addr_reg, start_idx); *vals++ = t4_read_reg(adap, data_reg); start_idx++; } } /** * t4_write_indirect - write indirectly addressed registers * @adap: the adapter * @addr_reg: register holding the indirect addresses * @data_reg: register holding the value for the indirect registers * @vals: values to write * @nregs: how many indirect registers to write * @start_idx: address of first indirect register to write * * Writes a sequential block of registers that are accessed indirectly * through an address/data register pair. */ void t4_write_indirect(struct adapter *adap, unsigned int addr_reg, unsigned int data_reg, const u32 *vals, unsigned int nregs, unsigned int start_idx) { while (nregs--) { t4_write_reg(adap, addr_reg, start_idx++); t4_write_reg(adap, data_reg, *vals++); } } /* * Read a 32-bit PCI Configuration Space register via the PCI-E backdoor * mechanism. This guarantees that we get the real value even if we're * operating within a Virtual Machine and the Hypervisor is trapping our * Configuration Space accesses. */ void t4_hw_pci_read_cfg4(struct adapter *adap, int reg, u32 *val) { u32 req = FUNCTION_V(adap->pf) | REGISTER_V(reg); if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5) req |= ENABLE_F; else req |= T6_ENABLE_F; if (is_t4(adap->params.chip)) req |= LOCALCFG_F; t4_write_reg(adap, PCIE_CFG_SPACE_REQ_A, req); *val = t4_read_reg(adap, PCIE_CFG_SPACE_DATA_A); /* Reset ENABLE to 0 so reads of PCIE_CFG_SPACE_DATA won't cause a * Configuration Space read. (None of the other fields matter when * ENABLE is 0 so a simple register write is easier than a * read-modify-write via t4_set_reg_field().) */ t4_write_reg(adap, PCIE_CFG_SPACE_REQ_A, 0); } /* * t4_report_fw_error - report firmware error * @adap: the adapter * * The adapter firmware can indicate error conditions to the host. * If the firmware has indicated an error, print out the reason for * the firmware error. */ static void t4_report_fw_error(struct adapter *adap) { static const char *const reason[] = { "Crash", /* PCIE_FW_EVAL_CRASH */ "During Device Preparation", /* PCIE_FW_EVAL_PREP */ "During Device Configuration", /* PCIE_FW_EVAL_CONF */ "During Device Initialization", /* PCIE_FW_EVAL_INIT */ "Unexpected Event", /* PCIE_FW_EVAL_UNEXPECTEDEVENT */ "Insufficient Airflow", /* PCIE_FW_EVAL_OVERHEAT */ "Device Shutdown", /* PCIE_FW_EVAL_DEVICESHUTDOWN */ "Reserved", /* reserved */ }; u32 pcie_fw; pcie_fw = t4_read_reg(adap, PCIE_FW_A); if (pcie_fw & PCIE_FW_ERR_F) dev_err(adap->pdev_dev, "Firmware reports adapter error: %s\n", reason[PCIE_FW_EVAL_G(pcie_fw)]); } /* * Get the reply to a mailbox command and store it in @rpl in big-endian order. */ static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit, u32 mbox_addr) { for ( ; nflit; nflit--, mbox_addr += 8) *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr)); } /* * Handle a FW assertion reported in a mailbox. */ static void fw_asrt(struct adapter *adap, u32 mbox_addr) { struct fw_debug_cmd asrt; get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr); dev_alert(adap->pdev_dev, "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n", asrt.u.assert.filename_0_7, be32_to_cpu(asrt.u.assert.line), be32_to_cpu(asrt.u.assert.x), be32_to_cpu(asrt.u.assert.y)); } static void dump_mbox(struct adapter *adap, int mbox, u32 data_reg) { dev_err(adap->pdev_dev, "mbox %d: %llx %llx %llx %llx %llx %llx %llx %llx\n", mbox, (unsigned long long)t4_read_reg64(adap, data_reg), (unsigned long long)t4_read_reg64(adap, data_reg + 8), (unsigned long long)t4_read_reg64(adap, data_reg + 16), (unsigned long long)t4_read_reg64(adap, data_reg + 24), (unsigned long long)t4_read_reg64(adap, data_reg + 32), (unsigned long long)t4_read_reg64(adap, data_reg + 40), (unsigned long long)t4_read_reg64(adap, data_reg + 48), (unsigned long long)t4_read_reg64(adap, data_reg + 56)); } /** * t4_wr_mbox_meat_timeout - send a command to FW through the given mailbox * @adap: the adapter * @mbox: index of the mailbox to use * @cmd: the command to write * @size: command length in bytes * @rpl: where to optionally store the reply * @sleep_ok: if true we may sleep while awaiting command completion * @timeout: time to wait for command to finish before timing out * * Sends the given command to FW through the selected mailbox and waits * for the FW to execute the command. If @rpl is not %NULL it is used to * store the FW's reply to the command. The command and its optional * reply are of the same length. FW can take up to %FW_CMD_MAX_TIMEOUT ms * to respond. @sleep_ok determines whether we may sleep while awaiting * the response. If sleeping is allowed we use progressive backoff * otherwise we spin. * * The return value is 0 on success or a negative errno on failure. A * failure can happen either because we are not able to execute the * command or FW executes it but signals an error. In the latter case * the return value is the error code indicated by FW (negated). */ int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, const void *cmd, int size, void *rpl, bool sleep_ok, int timeout) { static const int delay[] = { 1, 1, 3, 5, 10, 10, 20, 50, 100, 200 }; u32 v; u64 res; int i, ms, delay_idx; const __be64 *p = cmd; u32 data_reg = PF_REG(mbox, CIM_PF_MAILBOX_DATA_A); u32 ctl_reg = PF_REG(mbox, CIM_PF_MAILBOX_CTRL_A); if ((size & 15) || size > MBOX_LEN) return -EINVAL; /* * If the device is off-line, as in EEH, commands will time out. * Fail them early so we don't waste time waiting. */ if (adap->pdev->error_state != pci_channel_io_normal) return -EIO; v = MBOWNER_G(t4_read_reg(adap, ctl_reg)); for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++) v = MBOWNER_G(t4_read_reg(adap, ctl_reg)); if (v != MBOX_OWNER_DRV) return v ? -EBUSY : -ETIMEDOUT; for (i = 0; i < size; i += 8) t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p++)); t4_write_reg(adap, ctl_reg, MBMSGVALID_F | MBOWNER_V(MBOX_OWNER_FW)); t4_read_reg(adap, ctl_reg); /* flush write */ delay_idx = 0; ms = delay[0]; for (i = 0; i < timeout; i += ms) { if (sleep_ok) { ms = delay[delay_idx]; /* last element may repeat */ if (delay_idx < ARRAY_SIZE(delay) - 1) delay_idx++; msleep(ms); } else mdelay(ms); v = t4_read_reg(adap, ctl_reg); if (MBOWNER_G(v) == MBOX_OWNER_DRV) { if (!(v & MBMSGVALID_F)) { t4_write_reg(adap, ctl_reg, 0); continue; } res = t4_read_reg64(adap, data_reg); if (FW_CMD_OP_G(res >> 32) == FW_DEBUG_CMD) { fw_asrt(adap, data_reg); res = FW_CMD_RETVAL_V(EIO); } else if (rpl) { get_mbox_rpl(adap, rpl, size / 8, data_reg); } if (FW_CMD_RETVAL_G((int)res)) dump_mbox(adap, mbox, data_reg); t4_write_reg(adap, ctl_reg, 0); return -FW_CMD_RETVAL_G((int)res); } } dump_mbox(adap, mbox, data_reg); dev_err(adap->pdev_dev, "command %#x in mailbox %d timed out\n", *(const u8 *)cmd, mbox); t4_report_fw_error(adap); return -ETIMEDOUT; } int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size, void *rpl, bool sleep_ok) { return t4_wr_mbox_meat_timeout(adap, mbox, cmd, size, rpl, sleep_ok, FW_CMD_MAX_TIMEOUT); } static int t4_edc_err_read(struct adapter *adap, int idx) { u32 edc_ecc_err_addr_reg; u32 rdata_reg; if (is_t4(adap->params.chip)) { CH_WARN(adap, "%s: T4 NOT supported.\n", __func__); return 0; } if (idx != 0 && idx != 1) { CH_WARN(adap, "%s: idx %d NOT supported.\n", __func__, idx); return 0; } edc_ecc_err_addr_reg = EDC_T5_REG(EDC_H_ECC_ERR_ADDR_A, idx); rdata_reg = EDC_T5_REG(EDC_H_BIST_STATUS_RDATA_A, idx); CH_WARN(adap, "edc%d err addr 0x%x: 0x%x.\n", idx, edc_ecc_err_addr_reg, t4_read_reg(adap, edc_ecc_err_addr_reg)); CH_WARN(adap, "bist: 0x%x, status %llx %llx %llx %llx %llx %llx %llx %llx %llx.\n", rdata_reg, (unsigned long long)t4_read_reg64(adap, rdata_reg), (unsigned long long)t4_read_reg64(adap, rdata_reg + 8), (unsigned long long)t4_read_reg64(adap, rdata_reg + 16), (unsigned long long)t4_read_reg64(adap, rdata_reg + 24), (unsigned long long)t4_read_reg64(adap, rdata_reg + 32), (unsigned long long)t4_read_reg64(adap, rdata_reg + 40), (unsigned long long)t4_read_reg64(adap, rdata_reg + 48), (unsigned long long)t4_read_reg64(adap, rdata_reg + 56), (unsigned long long)t4_read_reg64(adap, rdata_reg + 64)); return 0; } /** * t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window * @adap: the adapter * @win: PCI-E Memory Window to use * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC * @addr: address within indicated memory type * @len: amount of memory to transfer * @hbuf: host memory buffer * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0) * * Reads/writes an [almost] arbitrary memory region in the firmware: the * firmware memory address and host buffer must be aligned on 32-bit * boudaries; the length may be arbitrary. The memory is transferred as * a raw byte sequence from/to the firmware's memory. If this memory * contains data structures which contain multi-byte integers, it's the * caller's responsibility to perform appropriate byte order conversions. */ int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr, u32 len, void *hbuf, int dir) { u32 pos, offset, resid, memoffset; u32 edc_size, mc_size, win_pf, mem_reg, mem_aperture, mem_base; u32 *buf; /* Argument sanity checks ... */ if (addr & 0x3 || (uintptr_t)hbuf & 0x3) return -EINVAL; buf = (u32 *)hbuf; /* It's convenient to be able to handle lengths which aren't a * multiple of 32-bits because we often end up transferring files to * the firmware. So we'll handle that by normalizing the length here * and then handling any residual transfer at the end. */ resid = len & 0x3; len -= resid; /* Offset into the region of memory which is being accessed * MEM_EDC0 = 0 * MEM_EDC1 = 1 * MEM_MC = 2 -- MEM_MC for chips with only 1 memory controller * MEM_MC1 = 3 -- for chips with 2 memory controllers (e.g. T5) */ edc_size = EDRAM0_SIZE_G(t4_read_reg(adap, MA_EDRAM0_BAR_A)); if (mtype != MEM_MC1) memoffset = (mtype * (edc_size * 1024 * 1024)); else { mc_size = EXT_MEM0_SIZE_G(t4_read_reg(adap, MA_EXT_MEMORY0_BAR_A)); memoffset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024; } /* Determine the PCIE_MEM_ACCESS_OFFSET */ addr = addr + memoffset; /* Each PCI-E Memory Window is programmed with a window size -- or * "aperture" -- which controls the granularity of its mapping onto * adapter memory. We need to grab that aperture in order to know * how to use the specified window. The window is also programmed * with the base address of the Memory Window in BAR0's address * space. For T4 this is an absolute PCI-E Bus Address. For T5 * the address is relative to BAR0. */ mem_reg = t4_read_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win)); mem_aperture = 1 << (WINDOW_G(mem_reg) + WINDOW_SHIFT_X); mem_base = PCIEOFST_G(mem_reg) << PCIEOFST_SHIFT_X; if (is_t4(adap->params.chip)) mem_base -= adap->t4_bar0; win_pf = is_t4(adap->params.chip) ? 0 : PFNUM_V(adap->pf); /* Calculate our initial PCI-E Memory Window Position and Offset into * that Window. */ pos = addr & ~(mem_aperture-1); offset = addr - pos; /* Set up initial PCI-E Memory Window to cover the start of our * transfer. (Read it back to ensure that changes propagate before we * attempt to use the new value.) */ t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win), pos | win_pf); t4_read_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win)); /* Transfer data to/from the adapter as long as there's an integral * number of 32-bit transfers to complete. * * A note on Endianness issues: * * The "register" reads and writes below from/to the PCI-E Memory * Window invoke the standard adapter Big-Endian to PCI-E Link * Little-Endian "swizzel." As a result, if we have the following * data in adapter memory: * * Memory: ... | b0 | b1 | b2 | b3 | ... * Address: i+0 i+1 i+2 i+3 * * Then a read of the adapter memory via the PCI-E Memory Window * will yield: * * x = readl(i) * 31 0 * [ b3 | b2 | b1 | b0 ] * * If this value is stored into local memory on a Little-Endian system * it will show up correctly in local memory as: * * ( ..., b0, b1, b2, b3, ... ) * * But on a Big-Endian system, the store will show up in memory * incorrectly swizzled as: * * ( ..., b3, b2, b1, b0, ... ) * * So we need to account for this in the reads and writes to the * PCI-E Memory Window below by undoing the register read/write * swizzels. */ while (len > 0) { if (dir == T4_MEMORY_READ) *buf++ = le32_to_cpu((__force __le32)t4_read_reg(adap, mem_base + offset)); else t4_write_reg(adap, mem_base + offset, (__force u32)cpu_to_le32(*buf++)); offset += sizeof(__be32); len -= sizeof(__be32); /* If we've reached the end of our current window aperture, * move the PCI-E Memory Window on to the next. Note that * doing this here after "len" may be 0 allows us to set up * the PCI-E Memory Window for a possible final residual * transfer below ... */ if (offset == mem_aperture) { pos += mem_aperture; offset = 0; t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win), pos | win_pf); t4_read_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win)); } } /* If the original transfer had a length which wasn't a multiple of * 32-bits, now's where we need to finish off the transfer of the * residual amount. The PCI-E Memory Window has already been moved * above (if necessary) to cover this final transfer. */ if (resid) { union { u32 word; char byte[4]; } last; unsigned char *bp; int i; if (dir == T4_MEMORY_READ) { last.word = le32_to_cpu( (__force __le32)t4_read_reg(adap, mem_base + offset)); for (bp = (unsigned char *)buf, i = resid; i < 4; i++) bp[i] = last.byte[i]; } else { last.word = *buf; for (i = resid; i < 4; i++) last.byte[i] = 0; t4_write_reg(adap, mem_base + offset, (__force u32)cpu_to_le32(last.word)); } } return 0; } /* Return the specified PCI-E Configuration Space register from our Physical * Function. We try first via a Firmware LDST Command since we prefer to let * the firmware own all of these registers, but if that fails we go for it * directly ourselves. */ u32 t4_read_pcie_cfg4(struct adapter *adap, int reg) { u32 val, ldst_addrspace; /* If fw_attach != 0, construct and send the Firmware LDST Command to * retrieve the specified PCI-E Configuration Space register. */ struct fw_ldst_cmd ldst_cmd; int ret; memset(&ldst_cmd, 0, sizeof(ldst_cmd)); ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FUNC_PCIE); ldst_cmd.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) | FW_CMD_REQUEST_F | FW_CMD_READ_F | ldst_addrspace); ldst_cmd.cycles_to_len16 = cpu_to_be32(FW_LEN16(ldst_cmd)); ldst_cmd.u.pcie.select_naccess = FW_LDST_CMD_NACCESS_V(1); ldst_cmd.u.pcie.ctrl_to_fn = (FW_LDST_CMD_LC_F | FW_LDST_CMD_FN_V(adap->pf)); ldst_cmd.u.pcie.r = reg; /* If the LDST Command succeeds, return the result, otherwise * fall through to reading it directly ourselves ... */ ret = t4_wr_mbox(adap, adap->mbox, &ldst_cmd, sizeof(ldst_cmd), &ldst_cmd); if (ret == 0) val = be32_to_cpu(ldst_cmd.u.pcie.data[0]); else /* Read the desired Configuration Space register via the PCI-E * Backdoor mechanism. */ t4_hw_pci_read_cfg4(adap, reg, &val); return val; } /* Get the window based on base passed to it. * Window aperture is currently unhandled, but there is no use case for it * right now */ static u32 t4_get_window(struct adapter *adap, u32 pci_base, u64 pci_mask, u32 memwin_base) { u32 ret; if (is_t4(adap->params.chip)) { u32 bar0; /* Truncation intentional: we only read the bottom 32-bits of * the 64-bit BAR0/BAR1 ... We use the hardware backdoor * mechanism to read BAR0 instead of using * pci_resource_start() because we could be operating from * within a Virtual Machine which is trapping our accesses to * our Configuration Space and we need to set up the PCI-E * Memory Window decoders with the actual addresses which will * be coming across the PCI-E link. */ bar0 = t4_read_pcie_cfg4(adap, pci_base); bar0 &= pci_mask; adap->t4_bar0 = bar0; ret = bar0 + memwin_base; } else { /* For T5, only relative offset inside the PCIe BAR is passed */ ret = memwin_base; } return ret; } /* Get the default utility window (win0) used by everyone */ u32 t4_get_util_window(struct adapter *adap) { return t4_get_window(adap, PCI_BASE_ADDRESS_0, PCI_BASE_ADDRESS_MEM_MASK, MEMWIN0_BASE); } /* Set up memory window for accessing adapter memory ranges. (Read * back MA register to ensure that changes propagate before we attempt * to use the new values.) */ void t4_setup_memwin(struct adapter *adap, u32 memwin_base, u32 window) { t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, window), memwin_base | BIR_V(0) | WINDOW_V(ilog2(MEMWIN0_APERTURE) - WINDOW_SHIFT_X)); t4_read_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, window)); } /** * t4_get_regs_len - return the size of the chips register set * @adapter: the adapter * * Returns the size of the chip's BAR0 register space. */ unsigned int t4_get_regs_len(struct adapter *adapter) { unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip); switch (chip_version) { case CHELSIO_T4: return T4_REGMAP_SIZE; case CHELSIO_T5: case CHELSIO_T6: return T5_REGMAP_SIZE; } dev_err(adapter->pdev_dev, "Unsupported chip version %d\n", chip_version); return 0; } /** * t4_get_regs - read chip registers into provided buffer * @adap: the adapter * @buf: register buffer * @buf_size: size (in bytes) of register buffer * * If the provided register buffer isn't large enough for the chip's * full register range, the register dump will be truncated to the * register buffer's size. */ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size) { static const unsigned int t4_reg_ranges[] = { 0x1008, 0x1108, 0x1180, 0x1184, 0x1190, 0x1194, 0x11a0, 0x11a4, 0x11b0, 0x11b4, 0x11fc, 0x123c, 0x1300, 0x173c, 0x1800, 0x18fc, 0x3000, 0x30d8, 0x30e0, 0x30e4, 0x30ec, 0x5910, 0x5920, 0x5924, 0x5960, 0x5960, 0x5968, 0x5968, 0x5970, 0x5970, 0x5978, 0x5978, 0x5980, 0x5980, 0x5988, 0x5988, 0x5990, 0x5990, 0x5998, 0x5998, 0x59a0, 0x59d4, 0x5a00, 0x5ae0, 0x5ae8, 0x5ae8, 0x5af0, 0x5af0, 0x5af8, 0x5af8, 0x6000, 0x6098, 0x6100, 0x6150, 0x6200, 0x6208, 0x6240, 0x6248, 0x6280, 0x62b0, 0x62c0, 0x6338, 0x6370, 0x638c, 0x6400, 0x643c, 0x6500, 0x6524, 0x6a00, 0x6a04, 0x6a14, 0x6a38, 0x6a60, 0x6a70, 0x6a78, 0x6a78, 0x6b00, 0x6b0c, 0x6b1c, 0x6b84, 0x6bf0, 0x6bf8, 0x6c00, 0x6c0c, 0x6c1c, 0x6c84, 0x6cf0, 0x6cf8, 0x6d00, 0x6d0c, 0x6d1c, 0x6d84, 0x6df0, 0x6df8, 0x6e00, 0x6e0c, 0x6e1c, 0x6e84, 0x6ef0, 0x6ef8, 0x6f00, 0x6f0c, 0x6f1c, 0x6f84, 0x6ff0, 0x6ff8, 0x7000, 0x700c, 0x701c, 0x7084, 0x70f0, 0x70f8, 0x7100, 0x710c, 0x711c, 0x7184, 0x71f0, 0x71f8, 0x7200, 0x720c, 0x721c, 0x7284, 0x72f0, 0x72f8, 0x7300, 0x730c, 0x731c, 0x7384, 0x73f0, 0x73f8, 0x7400, 0x7450, 0x7500, 0x7530, 0x7600, 0x760c, 0x7614, 0x761c, 0x7680, 0x76cc, 0x7700, 0x7798, 0x77c0, 0x77fc, 0x7900, 0x79fc, 0x7b00, 0x7b58, 0x7b60, 0x7b84, 0x7b8c, 0x7c38, 0x7d00, 0x7d38, 0x7d40, 0x7d80, 0x7d8c, 0x7ddc, 0x7de4, 0x7e04, 0x7e10, 0x7e1c, 0x7e24, 0x7e38, 0x7e40, 0x7e44, 0x7e4c, 0x7e78, 0x7e80, 0x7ea4, 0x7eac, 0x7edc, 0x7ee8, 0x7efc, 0x8dc0, 0x8e04, 0x8e10, 0x8e1c, 0x8e30, 0x8e78, 0x8ea0, 0x8eb8, 0x8ec0, 0x8f6c, 0x8fc0, 0x9008, 0x9010, 0x9058, 0x9060, 0x9060, 0x9068, 0x9074, 0x90fc, 0x90fc, 0x9400, 0x9408, 0x9410, 0x9458, 0x9600, 0x9600, 0x9608, 0x9638, 0x9640, 0x96bc, 0x9800, 0x9808, 0x9820, 0x983c, 0x9850, 0x9864, 0x9c00, 0x9c6c, 0x9c80, 0x9cec, 0x9d00, 0x9d6c, 0x9d80, 0x9dec, 0x9e00, 0x9e6c, 0x9e80, 0x9eec, 0x9f00, 0x9f6c, 0x9f80, 0x9fec, 0xd004, 0xd004, 0xd010, 0xd03c, 0xdfc0, 0xdfe0, 0xe000, 0xea7c, 0xf000, 0x11190, 0x19040, 0x1906c, 0x19078, 0x19080, 0x1908c, 0x190e4, 0x190f0, 0x190f8, 0x19100, 0x19110, 0x19120, 0x19124, 0x19150, 0x19194, 0x1919c, 0x191b0, 0x191d0, 0x191e8, 0x19238, 0x1924c, 0x193f8, 0x1943c, 0x1944c, 0x19474, 0x19490, 0x194e0, 0x194f0, 0x194f8, 0x19800, 0x19c08, 0x19c10, 0x19c90, 0x19ca0, 0x19ce4, 0x19cf0, 0x19d40, 0x19d50, 0x19d94, 0x19da0, 0x19de8, 0x19df0, 0x19e40, 0x19e50, 0x19e90, 0x19ea0, 0x19f4c, 0x1a000, 0x1a004, 0x1a010, 0x1a06c, 0x1a0b0, 0x1a0e4, 0x1a0ec, 0x1a0f4, 0x1a100, 0x1a108, 0x1a114, 0x1a120, 0x1a128, 0x1a130, 0x1a138, 0x1a138, 0x1a190, 0x1a1c4, 0x1a1fc, 0x1a1fc, 0x1e040, 0x1e04c, 0x1e284, 0x1e28c, 0x1e2c0, 0x1e2c0, 0x1e2e0, 0x1e2e0, 0x1e300, 0x1e384, 0x1e3c0, 0x1e3c8, 0x1e440, 0x1e44c, 0x1e684, 0x1e68c, 0x1e6c0, 0x1e6c0, 0x1e6e0, 0x1e6e0, 0x1e700, 0x1e784, 0x1e7c0, 0x1e7c8, 0x1e840, 0x1e84c, 0x1ea84, 0x1ea8c, 0x1eac0, 0x1eac0, 0x1eae0, 0x1eae0, 0x1eb00, 0x1eb84, 0x1ebc0, 0x1ebc8, 0x1ec40, 0x1ec4c, 0x1ee84, 0x1ee8c, 0x1eec0, 0x1eec0, 0x1eee0, 0x1eee0, 0x1ef00, 0x1ef84, 0x1efc0, 0x1efc8, 0x1f040, 0x1f04c, 0x1f284, 0x1f28c, 0x1f2c0, 0x1f2c0, 0x1f2e0, 0x1f2e0, 0x1f300, 0x1f384, 0x1f3c0, 0x1f3c8, 0x1f440, 0x1f44c, 0x1f684, 0x1f68c, 0x1f6c0, 0x1f6c0, 0x1f6e0, 0x1f6e0, 0x1f700, 0x1f784, 0x1f7c0, 0x1f7c8, 0x1f840, 0x1f84c, 0x1fa84, 0x1fa8c, 0x1fac0, 0x1fac0, 0x1fae0, 0x1fae0, 0x1fb00, 0x1fb84, 0x1fbc0, 0x1fbc8, 0x1fc40, 0x1fc4c, 0x1fe84, 0x1fe8c, 0x1fec0, 0x1fec0, 0x1fee0, 0x1fee0, 0x1ff00, 0x1ff84, 0x1ffc0, 0x1ffc8, 0x20000, 0x2002c, 0x20100, 0x2013c, 0x20190, 0x201a0, 0x201a8, 0x201b8, 0x201c4, 0x201c8, 0x20200, 0x20318, 0x20400, 0x204b4, 0x204c0, 0x20528, 0x20540, 0x20614, 0x21000, 0x21040, 0x2104c, 0x21060, 0x210c0, 0x210ec, 0x21200, 0x21268, 0x21270, 0x21284, 0x212fc, 0x21388, 0x21400, 0x21404, 0x21500, 0x21500, 0x21510, 0x21518, 0x2152c, 0x21530, 0x2153c, 0x2153c, 0x21550, 0x21554, 0x21600, 0x21600, 0x21608, 0x2161c, 0x21624, 0x21628, 0x21630, 0x21634, 0x2163c, 0x2163c, 0x21700, 0x2171c, 0x21780, 0x2178c, 0x21800, 0x21818, 0x21820, 0x21828, 0x21830, 0x21848, 0x21850, 0x21854, 0x21860, 0x21868, 0x21870, 0x21870, 0x21878, 0x21898, 0x218a0, 0x218a8, 0x218b0, 0x218c8, 0x218d0, 0x218d4, 0x218e0, 0x218e8, 0x218f0, 0x218f0, 0x218f8, 0x21a18, 0x21a20, 0x21a28, 0x21a30, 0x21a48, 0x21a50, 0x21a54, 0x21a60, 0x21a68, 0x21a70, 0x21a70, 0x21a78, 0x21a98, 0x21aa0, 0x21aa8, 0x21ab0, 0x21ac8, 0x21ad0, 0x21ad4, 0x21ae0, 0x21ae8, 0x21af0, 0x21af0, 0x21af8, 0x21c18, 0x21c20, 0x21c20, 0x21c28, 0x21c30, 0x21c38, 0x21c38, 0x21c80, 0x21c98, 0x21ca0, 0x21ca8, 0x21cb0, 0x21cc8, 0x21cd0, 0x21cd4, 0x21ce0, 0x21ce8, 0x21cf0, 0x21cf0, 0x21cf8, 0x21d7c, 0x21e00, 0x21e04, 0x22000, 0x2202c, 0x22100, 0x2213c, 0x22190, 0x221a0, 0x221a8, 0x221b8, 0x221c4, 0x221c8, 0x22200, 0x22318, 0x22400, 0x224b4, 0x224c0, 0x22528, 0x22540, 0x22614, 0x23000, 0x23040, 0x2304c, 0x23060, 0x230c0, 0x230ec, 0x23200, 0x23268, 0x23270, 0x23284, 0x232fc, 0x23388, 0x23400, 0x23404, 0x23500, 0x23500, 0x23510, 0x23518, 0x2352c, 0x23530, 0x2353c, 0x2353c, 0x23550, 0x23554, 0x23600, 0x23600, 0x23608, 0x2361c, 0x23624, 0x23628, 0x23630, 0x23634, 0x2363c, 0x2363c, 0x23700, 0x2371c, 0x23780, 0x2378c, 0x23800, 0x23818, 0x23820, 0x23828, 0x23830, 0x23848, 0x23850, 0x23854, 0x23860, 0x23868, 0x23870, 0x23870, 0x23878, 0x23898, 0x238a0, 0x238a8, 0x238b0, 0x238c8, 0x238d0, 0x238d4, 0x238e0, 0x238e8, 0x238f0, 0x238f0, 0x238f8, 0x23a18, 0x23a20, 0x23a28, 0x23a30, 0x23a48, 0x23a50, 0x23a54, 0x23a60, 0x23a68, 0x23a70, 0x23a70, 0x23a78, 0x23a98, 0x23aa0, 0x23aa8, 0x23ab0, 0x23ac8, 0x23ad0, 0x23ad4, 0x23ae0, 0x23ae8, 0x23af0, 0x23af0, 0x23af8, 0x23c18, 0x23c20, 0x23c20, 0x23c28, 0x23c30, 0x23c38, 0x23c38, 0x23c80, 0x23c98, 0x23ca0, 0x23ca8, 0x23cb0, 0x23cc8, 0x23cd0, 0x23cd4, 0x23ce0, 0x23ce8, 0x23cf0, 0x23cf0, 0x23cf8, 0x23d7c, 0x23e00, 0x23e04, 0x24000, 0x2402c, 0x24100, 0x2413c, 0x24190, 0x241a0, 0x241a8, 0x241b8, 0x241c4, 0x241c8, 0x24200, 0x24318, 0x24400, 0x244b4, 0x244c0, 0x24528, 0x24540, 0x24614, 0x25000, 0x25040, 0x2504c, 0x25060, 0x250c0, 0x250ec, 0x25200, 0x25268, 0x25270, 0x25284, 0x252fc, 0x25388, 0x25400, 0x25404, 0x25500, 0x25500, 0x25510, 0x25518, 0x2552c, 0x25530, 0x2553c, 0x2553c, 0x25550, 0x25554, 0x25600, 0x25600, 0x25608, 0x2561c, 0x25624, 0x25628, 0x25630, 0x25634, 0x2563c, 0x2563c, 0x25700, 0x2571c, 0x25780, 0x2578c, 0x25800, 0x25818, 0x25820, 0x25828, 0x25830, 0x25848, 0x25850, 0x25854, 0x25860, 0x25868, 0x25870, 0x25870, 0x25878, 0x25898, 0x258a0, 0x258a8, 0x258b0, 0x258c8, 0x258d0, 0x258d4, 0x258e0, 0x258e8, 0x258f0, 0x258f0, 0x258f8, 0x25a18, 0x25a20, 0x25a28, 0x25a30, 0x25a48, 0x25a50, 0x25a54, 0x25a60, 0x25a68, 0x25a70, 0x25a70, 0x25a78, 0x25a98, 0x25aa0, 0x25aa8, 0x25ab0, 0x25ac8, 0x25ad0, 0x25ad4, 0x25ae0, 0x25ae8, 0x25af0, 0x25af0, 0x25af8, 0x25c18, 0x25c20, 0x25c20, 0x25c28, 0x25c30, 0x25c38, 0x25c38, 0x25c80, 0x25c98, 0x25ca0, 0x25ca8, 0x25cb0, 0x25cc8, 0x25cd0, 0x25cd4, 0x25ce0, 0x25ce8, 0x25cf0, 0x25cf0, 0x25cf8, 0x25d7c, 0x25e00, 0x25e04, 0x26000, 0x2602c, 0x26100, 0x2613c, 0x26190, 0x261a0, 0x261a8, 0x261b8, 0x261c4, 0x261c8, 0x26200, 0x26318, 0x26400, 0x264b4, 0x264c0, 0x26528, 0x26540, 0x26614, 0x27000, 0x27040, 0x2704c, 0x27060, 0x270c0, 0x270ec, 0x27200, 0x27268, 0x27270, 0x27284, 0x272fc, 0x27388, 0x27400, 0x27404, 0x27500, 0x27500, 0x27510, 0x27518, 0x2752c, 0x27530, 0x2753c, 0x2753c, 0x27550, 0x27554, 0x27600, 0x27600, 0x27608, 0x2761c, 0x27624, 0x27628, 0x27630, 0x27634, 0x2763c, 0x2763c, 0x27700, 0x2771c, 0x27780, 0x2778c, 0x27800, 0x27818, 0x27820, 0x27828, 0x27830, 0x27848, 0x27850, 0x27854, 0x27860, 0x27868, 0x27870, 0x27870, 0x27878, 0x27898, 0x278a0, 0x278a8, 0x278b0, 0x278c8, 0x278d0, 0x278d4, 0x278e0, 0x278e8, 0x278f0, 0x278f0, 0x278f8, 0x27a18, 0x27a20, 0x27a28, 0x27a30, 0x27a48, 0x27a50, 0x27a54, 0x27a60, 0x27a68, 0x27a70, 0x27a70, 0x27a78, 0x27a98, 0x27aa0, 0x27aa8, 0x27ab0, 0x27ac8, 0x27ad0, 0x27ad4, 0x27ae0, 0x27ae8, 0x27af0, 0x27af0, 0x27af8, 0x27c18, 0x27c20, 0x27c20, 0x27c28, 0x27c30, 0x27c38, 0x27c38, 0x27c80, 0x27c98, 0x27ca0, 0x27ca8, 0x27cb0, 0x27cc8, 0x27cd0, 0x27cd4, 0x27ce0, 0x27ce8, 0x27cf0, 0x27cf0, 0x27cf8, 0x27d7c, 0x27e00, 0x27e04, }; static const unsigned int t5_reg_ranges[] = { 0x1008, 0x10c0, 0x10cc, 0x10f8, 0x1100, 0x1100, 0x110c, 0x1148, 0x1180, 0x1184, 0x1190, 0x1194, 0x11a0, 0x11a4, 0x11b0, 0x11b4, 0x11fc, 0x123c, 0x1280, 0x173c, 0x1800, 0x18fc, 0x3000, 0x3028, 0x3060, 0x30b0, 0x30b8, 0x30d8, 0x30e0, 0x30fc, 0x3140, 0x357c, 0x35a8, 0x35cc, 0x35ec, 0x35ec, 0x3600, 0x5624, 0x56cc, 0x56ec, 0x56f4, 0x5720, 0x5728, 0x575c, 0x580c, 0x5814, 0x5890, 0x589c, 0x58a4, 0x58ac, 0x58b8, 0x58bc, 0x5940, 0x59c8, 0x59d0, 0x59dc, 0x59fc, 0x5a18, 0x5a60, 0x5a70, 0x5a80, 0x5a9c, 0x5b94, 0x5bfc, 0x6000, 0x6020, 0x6028, 0x6040, 0x6058, 0x609c, 0x60a8, 0x614c, 0x7700, 0x7798, 0x77c0, 0x78fc, 0x7b00, 0x7b58, 0x7b60, 0x7b84, 0x7b8c, 0x7c54, 0x7d00, 0x7d38, 0x7d40, 0x7d80, 0x7d8c, 0x7ddc, 0x7de4, 0x7e04, 0x7e10, 0x7e1c, 0x7e24, 0x7e38, 0x7e40, 0x7e44, 0x7e4c, 0x7e78, 0x7e80, 0x7edc, 0x7ee8, 0x7efc, 0x8dc0, 0x8de0, 0x8df8, 0x8e04, 0x8e10, 0x8e84, 0x8ea0, 0x8f84, 0x8fc0, 0x9058, 0x9060, 0x9060, 0x9068, 0x90f8, 0x9400, 0x9408, 0x9410, 0x9470, 0x9600, 0x9600, 0x9608, 0x9638, 0x9640, 0x96f4, 0x9800, 0x9808, 0x9820, 0x983c, 0x9850, 0x9864, 0x9c00, 0x9c6c, 0x9c80, 0x9cec, 0x9d00, 0x9d6c, 0x9d80, 0x9dec, 0x9e00, 0x9e6c, 0x9e80, 0x9eec, 0x9f00, 0x9f6c, 0x9f80, 0xa020, 0xd004, 0xd004, 0xd010, 0xd03c, 0xdfc0, 0xdfe0, 0xe000, 0x1106c, 0x11074, 0x11088, 0x1109c, 0x1117c, 0x11190, 0x11204, 0x19040, 0x1906c, 0x19078, 0x19080, 0x1908c, 0x190e8, 0x190f0, 0x190f8, 0x19100, 0x19110, 0x19120, 0x19124, 0x19150, 0x19194, 0x1919c, 0x191b0, 0x191d0, 0x191e8, 0x19238, 0x19290, 0x193f8, 0x19428, 0x19430, 0x19444, 0x1944c, 0x1946c, 0x19474, 0x19474, 0x19490, 0x194cc, 0x194f0, 0x194f8, 0x19c00, 0x19c08, 0x19c10, 0x19c60, 0x19c94, 0x19ce4, 0x19cf0, 0x19d40, 0x19d50, 0x19d94, 0x19da0, 0x19de8, 0x19df0, 0x19e10, 0x19e50, 0x19e90, 0x19ea0, 0x19f24, 0x19f34, 0x19f34, 0x19f40, 0x19f50, 0x19f90, 0x19fb4, 0x19fc4, 0x19fe4, 0x1a000, 0x1a004, 0x1a010, 0x1a06c, 0x1a0b0, 0x1a0e4, 0x1a0ec, 0x1a0f8, 0x1a100, 0x1a108, 0x1a114, 0x1a120, 0x1a128, 0x1a130, 0x1a138, 0x1a138, 0x1a190, 0x1a1c4, 0x1a1fc, 0x1a1fc, 0x1e008, 0x1e00c, 0x1e040, 0x1e044, 0x1e04c, 0x1e04c, 0x1e284, 0x1e290, 0x1e2c0, 0x1e2c0, 0x1e2e0, 0x1e2e0, 0x1e300, 0x1e384, 0x1e3c0, 0x1e3c8, 0x1e408, 0x1e40c, 0x1e440, 0x1e444, 0x1e44c, 0x1e44c, 0x1e684, 0x1e690, 0x1e6c0, 0x1e6c0, 0x1e6e0, 0x1e6e0, 0x1e700, 0x1e784, 0x1e7c0, 0x1e7c8, 0x1e808, 0x1e80c, 0x1e840, 0x1e844, 0x1e84c, 0x1e84c, 0x1ea84, 0x1ea90, 0x1eac0, 0x1eac0, 0x1eae0, 0x1eae0, 0x1eb00, 0x1eb84, 0x1ebc0, 0x1ebc8, 0x1ec08, 0x1ec0c, 0x1ec40, 0x1ec44, 0x1ec4c, 0x1ec4c, 0x1ee84, 0x1ee90, 0x1eec0, 0x1eec0, 0x1eee0, 0x1eee0, 0x1ef00, 0x1ef84, 0x1efc0, 0x1efc8, 0x1f008, 0x1f00c, 0x1f040, 0x1f044, 0x1f04c, 0x1f04c, 0x1f284, 0x1f290, 0x1f2c0, 0x1f2c0, 0x1f2e0, 0x1f2e0, 0x1f300, 0x1f384, 0x1f3c0, 0x1f3c8, 0x1f408, 0x1f40c, 0x1f440, 0x1f444, 0x1f44c, 0x1f44c, 0x1f684, 0x1f690, 0x1f6c0, 0x1f6c0, 0x1f6e0, 0x1f6e0, 0x1f700, 0x1f784, 0x1f7c0, 0x1f7c8, 0x1f808, 0x1f80c, 0x1f840, 0x1f844, 0x1f84c, 0x1f84c, 0x1fa84, 0x1fa90, 0x1fac0, 0x1fac0, 0x1fae0, 0x1fae0, 0x1fb00, 0x1fb84, 0x1fbc0, 0x1fbc8, 0x1fc08, 0x1fc0c, 0x1fc40, 0x1fc44, 0x1fc4c, 0x1fc4c, 0x1fe84, 0x1fe90, 0x1fec0, 0x1fec0, 0x1fee0, 0x1fee0, 0x1ff00, 0x1ff84, 0x1ffc0, 0x1ffc8, 0x30000, 0x30030, 0x30038, 0x30038, 0x30040, 0x30040, 0x30100, 0x30144, 0x30190, 0x301a0, 0x301a8, 0x301b8, 0x301c4, 0x301c8, 0x301d0, 0x301d0, 0x30200, 0x30318, 0x30400, 0x304b4, 0x304c0, 0x3052c, 0x30540, 0x3061c, 0x30800, 0x30828, 0x30834, 0x30834, 0x308c0, 0x30908, 0x30910, 0x309ac, 0x30a00, 0x30a14, 0x30a1c, 0x30a2c, 0x30a44, 0x30a50, 0x30a74, 0x30a74, 0x30a7c, 0x30afc, 0x30b08, 0x30c24, 0x30d00, 0x30d00, 0x30d08, 0x30d14, 0x30d1c, 0x30d20, 0x30d3c, 0x30d3c, 0x30d48, 0x30d50, 0x31200, 0x3120c, 0x31220, 0x31220, 0x31240, 0x31240, 0x31600, 0x3160c, 0x31a00, 0x31a1c, 0x31e00, 0x31e20, 0x31e38, 0x31e3c, 0x31e80, 0x31e80, 0x31e88, 0x31ea8, 0x31eb0, 0x31eb4, 0x31ec8, 0x31ed4, 0x31fb8, 0x32004, 0x32200, 0x32200, 0x32208, 0x32240, 0x32248, 0x32280, 0x32288, 0x322c0, 0x322c8, 0x322fc, 0x32600, 0x32630, 0x32a00, 0x32abc, 0x32b00, 0x32b10, 0x32b20, 0x32b30, 0x32b40, 0x32b50, 0x32b60, 0x32b70, 0x33000, 0x33028, 0x33030, 0x33048, 0x33060, 0x33068, 0x33070, 0x3309c, 0x330f0, 0x33128, 0x33130, 0x33148, 0x33160, 0x33168, 0x33170, 0x3319c, 0x331f0, 0x33238, 0x33240, 0x33240, 0x33248, 0x33250, 0x3325c, 0x33264, 0x33270, 0x332b8, 0x332c0, 0x332e4, 0x332f8, 0x33338, 0x33340, 0x33340, 0x33348, 0x33350, 0x3335c, 0x33364, 0x33370, 0x333b8, 0x333c0, 0x333e4, 0x333f8, 0x33428, 0x33430, 0x33448, 0x33460, 0x33468, 0x33470, 0x3349c, 0x334f0, 0x33528, 0x33530, 0x33548, 0x33560, 0x33568, 0x33570, 0x3359c, 0x335f0, 0x33638, 0x33640, 0x33640, 0x33648, 0x33650, 0x3365c, 0x33664, 0x33670, 0x336b8, 0x336c0, 0x336e4, 0x336f8, 0x33738, 0x33740, 0x33740, 0x33748, 0x33750, 0x3375c, 0x33764, 0x33770, 0x337b8, 0x337c0, 0x337e4, 0x337f8, 0x337fc, 0x33814, 0x33814, 0x3382c, 0x3382c, 0x33880, 0x3388c, 0x338e8, 0x338ec, 0x33900, 0x33928, 0x33930, 0x33948, 0x33960, 0x33968, 0x33970, 0x3399c, 0x339f0, 0x33a38, 0x33a40, 0x33a40, 0x33a48, 0x33a50, 0x33a5c, 0x33a64, 0x33a70, 0x33ab8, 0x33ac0, 0x33ae4, 0x33af8, 0x33b10, 0x33b28, 0x33b28, 0x33b3c, 0x33b50, 0x33bf0, 0x33c10, 0x33c28, 0x33c28, 0x33c3c, 0x33c50, 0x33cf0, 0x33cfc, 0x34000, 0x34030, 0x34038, 0x34038, 0x34040, 0x34040, 0x34100, 0x34144, 0x34190, 0x341a0, 0x341a8, 0x341b8, 0x341c4, 0x341c8, 0x341d0, 0x341d0, 0x34200, 0x34318, 0x34400, 0x344b4, 0x344c0, 0x3452c, 0x34540, 0x3461c, 0x34800, 0x34828, 0x34834, 0x34834, 0x348c0, 0x34908, 0x34910, 0x349ac, 0x34a00, 0x34a14, 0x34a1c, 0x34a2c, 0x34a44, 0x34a50, 0x34a74, 0x34a74, 0x34a7c, 0x34afc, 0x34b08, 0x34c24, 0x34d00, 0x34d00, 0x34d08, 0x34d14, 0x34d1c, 0x34d20, 0x34d3c, 0x34d3c, 0x34d48, 0x34d50, 0x35200, 0x3520c, 0x35220, 0x35220, 0x35240, 0x35240, 0x35600, 0x3560c, 0x35a00, 0x35a1c, 0x35e00, 0x35e20, 0x35e38, 0x35e3c, 0x35e80, 0x35e80, 0x35e88, 0x35ea8, 0x35eb0, 0x35eb4, 0x35ec8, 0x35ed4, 0x35fb8, 0x36004, 0x36200, 0x36200, 0x36208, 0x36240, 0x36248, 0x36280, 0x36288, 0x362c0, 0x362c8, 0x362fc, 0x36600, 0x36630, 0x36a00, 0x36abc, 0x36b00, 0x36b10, 0x36b20, 0x36b30, 0x36b40, 0x36b50, 0x36b60, 0x36b70, 0x37000, 0x37028, 0x37030, 0x37048, 0x37060, 0x37068, 0x37070, 0x3709c, 0x370f0, 0x37128, 0x37130, 0x37148, 0x37160, 0x37168, 0x37170, 0x3719c, 0x371f0, 0x37238, 0x37240, 0x37240, 0x37248, 0x37250, 0x3725c, 0x37264, 0x37270, 0x372b8, 0x372c0, 0x372e4, 0x372f8, 0x37338, 0x37340, 0x37340, 0x37348, 0x37350, 0x3735c, 0x37364, 0x37370, 0x373b8, 0x373c0, 0x373e4, 0x373f8, 0x37428, 0x37430, 0x37448, 0x37460, 0x37468, 0x37470, 0x3749c, 0x374f0, 0x37528, 0x37530, 0x37548, 0x37560, 0x37568, 0x37570, 0x3759c, 0x375f0, 0x37638, 0x37640, 0x37640, 0x37648, 0x37650, 0x3765c, 0x37664, 0x37670, 0x376b8, 0x376c0, 0x376e4, 0x376f8, 0x37738, 0x37740, 0x37740, 0x37748, 0x37750, 0x3775c, 0x37764, 0x37770, 0x377b8, 0x377c0, 0x377e4, 0x377f8, 0x377fc, 0x37814, 0x37814, 0x3782c, 0x3782c, 0x37880, 0x3788c, 0x378e8, 0x378ec, 0x37900, 0x37928, 0x37930, 0x37948, 0x37960, 0x37968, 0x37970, 0x3799c, 0x379f0, 0x37a38, 0x37a40, 0x37a40, 0x37a48, 0x37a50, 0x37a5c, 0x37a64, 0x37a70, 0x37ab8, 0x37ac0, 0x37ae4, 0x37af8, 0x37b10, 0x37b28, 0x37b28, 0x37b3c, 0x37b50, 0x37bf0, 0x37c10, 0x37c28, 0x37c28, 0x37c3c, 0x37c50, 0x37cf0, 0x37cfc, 0x38000, 0x38030, 0x38038, 0x38038, 0x38040, 0x38040, 0x38100, 0x38144, 0x38190, 0x381a0, 0x381a8, 0x381b8, 0x381c4, 0x381c8, 0x381d0, 0x381d0, 0x38200, 0x38318, 0x38400, 0x384b4, 0x384c0, 0x3852c, 0x38540, 0x3861c, 0x38800, 0x38828, 0x38834, 0x38834, 0x388c0, 0x38908, 0x38910, 0x389ac, 0x38a00, 0x38a14, 0x38a1c, 0x38a2c, 0x38a44, 0x38a50, 0x38a74, 0x38a74, 0x38a7c, 0x38afc, 0x38b08, 0x38c24, 0x38d00, 0x38d00, 0x38d08, 0x38d14, 0x38d1c, 0x38d20, 0x38d3c, 0x38d3c, 0x38d48, 0x38d50, 0x39200, 0x3920c, 0x39220, 0x39220, 0x39240, 0x39240, 0x39600, 0x3960c, 0x39a00, 0x39a1c, 0x39e00, 0x39e20, 0x39e38, 0x39e3c, 0x39e80, 0x39e80, 0x39e88, 0x39ea8, 0x39eb0, 0x39eb4, 0x39ec8, 0x39ed4, 0x39fb8, 0x3a004, 0x3a200, 0x3a200, 0x3a208, 0x3a240, 0x3a248, 0x3a280, 0x3a288, 0x3a2c0, 0x3a2c8, 0x3a2fc, 0x3a600, 0x3a630, 0x3aa00, 0x3aabc, 0x3ab00, 0x3ab10, 0x3ab20, 0x3ab30, 0x3ab40, 0x3ab50, 0x3ab60, 0x3ab70, 0x3b000, 0x3b028, 0x3b030, 0x3b048, 0x3b060, 0x3b068, 0x3b070, 0x3b09c, 0x3b0f0, 0x3b128, 0x3b130, 0x3b148, 0x3b160, 0x3b168, 0x3b170, 0x3b19c, 0x3b1f0, 0x3b238, 0x3b240, 0x3b240, 0x3b248, 0x3b250, 0x3b25c, 0x3b264, 0x3b270, 0x3b2b8, 0x3b2c0, 0x3b2e4, 0x3b2f8, 0x3b338, 0x3b340, 0x3b340, 0x3b348, 0x3b350, 0x3b35c, 0x3b364, 0x3b370, 0x3b3b8, 0x3b3c0, 0x3b3e4, 0x3b3f8, 0x3b428, 0x3b430, 0x3b448, 0x3b460, 0x3b468, 0x3b470, 0x3b49c, 0x3b4f0, 0x3b528, 0x3b530, 0x3b548, 0x3b560, 0x3b568, 0x3b570, 0x3b59c, 0x3b5f0, 0x3b638, 0x3b640, 0x3b640, 0x3b648, 0x3b650, 0x3b65c, 0x3b664, 0x3b670, 0x3b6b8, 0x3b6c0, 0x3b6e4, 0x3b6f8, 0x3b738, 0x3b740, 0x3b740, 0x3b748, 0x3b750, 0x3b75c, 0x3b764, 0x3b770, 0x3b7b8, 0x3b7c0, 0x3b7e4, 0x3b7f8, 0x3b7fc, 0x3b814, 0x3b814, 0x3b82c, 0x3b82c, 0x3b880, 0x3b88c, 0x3b8e8, 0x3b8ec, 0x3b900, 0x3b928, 0x3b930, 0x3b948, 0x3b960, 0x3b968, 0x3b970, 0x3b99c, 0x3b9f0, 0x3ba38, 0x3ba40, 0x3ba40, 0x3ba48, 0x3ba50, 0x3ba5c, 0x3ba64, 0x3ba70, 0x3bab8, 0x3bac0, 0x3bae4, 0x3baf8, 0x3bb10, 0x3bb28, 0x3bb28, 0x3bb3c, 0x3bb50, 0x3bbf0, 0x3bc10, 0x3bc28, 0x3bc28, 0x3bc3c, 0x3bc50, 0x3bcf0, 0x3bcfc, 0x3c000, 0x3c030, 0x3c038, 0x3c038, 0x3c040, 0x3c040, 0x3c100, 0x3c144, 0x3c190, 0x3c1a0, 0x3c1a8, 0x3c1b8, 0x3c1c4, 0x3c1c8, 0x3c1d0, 0x3c1d0, 0x3c200, 0x3c318, 0x3c400, 0x3c4b4, 0x3c4c0, 0x3c52c, 0x3c540, 0x3c61c, 0x3c800, 0x3c828, 0x3c834, 0x3c834, 0x3c8c0, 0x3c908, 0x3c910, 0x3c9ac, 0x3ca00, 0x3ca14, 0x3ca1c, 0x3ca2c, 0x3ca44, 0x3ca50, 0x3ca74, 0x3ca74, 0x3ca7c, 0x3cafc, 0x3cb08, 0x3cc24, 0x3cd00, 0x3cd00, 0x3cd08, 0x3cd14, 0x3cd1c, 0x3cd20, 0x3cd3c, 0x3cd3c, 0x3cd48, 0x3cd50, 0x3d200, 0x3d20c, 0x3d220, 0x3d220, 0x3d240, 0x3d240, 0x3d600, 0x3d60c, 0x3da00, 0x3da1c, 0x3de00, 0x3de20, 0x3de38, 0x3de3c, 0x3de80, 0x3de80, 0x3de88, 0x3dea8, 0x3deb0, 0x3deb4, 0x3dec8, 0x3ded4, 0x3dfb8, 0x3e004, 0x3e200, 0x3e200, 0x3e208, 0x3e240, 0x3e248, 0x3e280, 0x3e288, 0x3e2c0, 0x3e2c8, 0x3e2fc, 0x3e600, 0x3e630, 0x3ea00, 0x3eabc, 0x3eb00, 0x3eb10, 0x3eb20, 0x3eb30, 0x3eb40, 0x3eb50, 0x3eb60, 0x3eb70, 0x3f000, 0x3f028, 0x3f030, 0x3f048, 0x3f060, 0x3f068, 0x3f070, 0x3f09c, 0x3f0f0, 0x3f128, 0x3f130, 0x3f148, 0x3f160, 0x3f168, 0x3f170, 0x3f19c, 0x3f1f0, 0x3f238, 0x3f240, 0x3f240, 0x3f248, 0x3f250, 0x3f25c, 0x3f264, 0x3f270, 0x3f2b8, 0x3f2c0, 0x3f2e4, 0x3f2f8, 0x3f338, 0x3f340, 0x3f340, 0x3f348, 0x3f350, 0x3f35c, 0x3f364, 0x3f370, 0x3f3b8, 0x3f3c0, 0x3f3e4, 0x3f3f8, 0x3f428, 0x3f430, 0x3f448, 0x3f460, 0x3f468, 0x3f470, 0x3f49c, 0x3f4f0, 0x3f528, 0x3f530, 0x3f548, 0x3f560, 0x3f568, 0x3f570, 0x3f59c, 0x3f5f0, 0x3f638, 0x3f640, 0x3f640, 0x3f648, 0x3f650, 0x3f65c, 0x3f664, 0x3f670, 0x3f6b8, 0x3f6c0, 0x3f6e4, 0x3f6f8, 0x3f738, 0x3f740, 0x3f740, 0x3f748, 0x3f750, 0x3f75c, 0x3f764, 0x3f770, 0x3f7b8, 0x3f7c0, 0x3f7e4, 0x3f7f8, 0x3f7fc, 0x3f814, 0x3f814, 0x3f82c, 0x3f82c, 0x3f880, 0x3f88c, 0x3f8e8, 0x3f8ec, 0x3f900, 0x3f928, 0x3f930, 0x3f948, 0x3f960, 0x3f968, 0x3f970, 0x3f99c, 0x3f9f0, 0x3fa38, 0x3fa40, 0x3fa40, 0x3fa48, 0x3fa50, 0x3fa5c, 0x3fa64, 0x3fa70, 0x3fab8, 0x3fac0, 0x3fae4, 0x3faf8, 0x3fb10, 0x3fb28, 0x3fb28, 0x3fb3c, 0x3fb50, 0x3fbf0, 0x3fc10, 0x3fc28, 0x3fc28, 0x3fc3c, 0x3fc50, 0x3fcf0, 0x3fcfc, 0x40000, 0x4000c, 0x40040, 0x40050, 0x40060, 0x40068, 0x4007c, 0x4008c, 0x40094, 0x400b0, 0x400c0, 0x40144, 0x40180, 0x4018c, 0x40200, 0x40254, 0x40260, 0x40264, 0x40270, 0x40288, 0x40290, 0x40298, 0x402ac, 0x402c8, 0x402d0, 0x402e0, 0x402f0, 0x402f0, 0x40300, 0x4033c, 0x403f8, 0x403fc, 0x41304, 0x413c4, 0x41400, 0x4140c, 0x41414, 0x4141c, 0x41480, 0x414d0, 0x44000, 0x44054, 0x4405c, 0x44078, 0x440c0, 0x44174, 0x44180, 0x441ac, 0x441b4, 0x441b8, 0x441c0, 0x44254, 0x4425c, 0x44278, 0x442c0, 0x44374, 0x44380, 0x443ac, 0x443b4, 0x443b8, 0x443c0, 0x44454, 0x4445c, 0x44478, 0x444c0, 0x44574, 0x44580, 0x445ac, 0x445b4, 0x445b8, 0x445c0, 0x44654, 0x4465c, 0x44678, 0x446c0, 0x44774, 0x44780, 0x447ac, 0x447b4, 0x447b8, 0x447c0, 0x44854, 0x4485c, 0x44878, 0x448c0, 0x44974, 0x44980, 0x449ac, 0x449b4, 0x449b8, 0x449c0, 0x449fc, 0x45000, 0x45004, 0x45010, 0x45030, 0x45040, 0x45060, 0x45068, 0x45068, 0x45080, 0x45084, 0x450a0, 0x450b0, 0x45200, 0x45204, 0x45210, 0x45230, 0x45240, 0x45260, 0x45268, 0x45268, 0x45280, 0x45284, 0x452a0, 0x452b0, 0x460c0, 0x460e4, 0x47000, 0x4703c, 0x47044, 0x4708c, 0x47200, 0x47250, 0x47400, 0x47408, 0x47414, 0x47420, 0x47600, 0x47618, 0x47800, 0x47814, 0x48000, 0x4800c, 0x48040, 0x48050, 0x48060, 0x48068, 0x4807c, 0x4808c, 0x48094, 0x480b0, 0x480c0, 0x48144, 0x48180, 0x4818c, 0x48200, 0x48254, 0x48260, 0x48264, 0x48270, 0x48288, 0x48290, 0x48298, 0x482ac, 0x482c8, 0x482d0, 0x482e0, 0x482f0, 0x482f0, 0x48300, 0x4833c, 0x483f8, 0x483fc, 0x49304, 0x493c4, 0x49400, 0x4940c, 0x49414, 0x4941c, 0x49480, 0x494d0, 0x4c000, 0x4c054, 0x4c05c, 0x4c078, 0x4c0c0, 0x4c174, 0x4c180, 0x4c1ac, 0x4c1b4, 0x4c1b8, 0x4c1c0, 0x4c254, 0x4c25c, 0x4c278, 0x4c2c0, 0x4c374, 0x4c380, 0x4c3ac, 0x4c3b4, 0x4c3b8, 0x4c3c0, 0x4c454, 0x4c45c, 0x4c478, 0x4c4c0, 0x4c574, 0x4c580, 0x4c5ac, 0x4c5b4, 0x4c5b8, 0x4c5c0, 0x4c654, 0x4c65c, 0x4c678, 0x4c6c0, 0x4c774, 0x4c780, 0x4c7ac, 0x4c7b4, 0x4c7b8, 0x4c7c0, 0x4c854, 0x4c85c, 0x4c878, 0x4c8c0, 0x4c974, 0x4c980, 0x4c9ac, 0x4c9b4, 0x4c9b8, 0x4c9c0, 0x4c9fc, 0x4d000, 0x4d004, 0x4d010, 0x4d030, 0x4d040, 0x4d060, 0x4d068, 0x4d068, 0x4d080, 0x4d084, 0x4d0a0, 0x4d0b0, 0x4d200, 0x4d204, 0x4d210, 0x4d230, 0x4d240, 0x4d260, 0x4d268, 0x4d268, 0x4d280, 0x4d284, 0x4d2a0, 0x4d2b0, 0x4e0c0, 0x4e0e4, 0x4f000, 0x4f03c, 0x4f044, 0x4f08c, 0x4f200, 0x4f250, 0x4f400, 0x4f408, 0x4f414, 0x4f420, 0x4f600, 0x4f618, 0x4f800, 0x4f814, 0x50000, 0x50084, 0x50090, 0x500cc, 0x50400, 0x50400, 0x50800, 0x50884, 0x50890, 0x508cc, 0x50c00, 0x50c00, 0x51000, 0x5101c, 0x51300, 0x51308, }; static const unsigned int t6_reg_ranges[] = { 0x1008, 0x101c, 0x1024, 0x10a8, 0x10b4, 0x10f8, 0x1100, 0x1114, 0x111c, 0x112c, 0x1138, 0x113c, 0x1144, 0x114c, 0x1180, 0x1184, 0x1190, 0x1194, 0x11a0, 0x11a4, 0x11b0, 0x11b4, 0x11fc, 0x1254, 0x1280, 0x133c, 0x1800, 0x18fc, 0x3000, 0x302c, 0x3060, 0x30b0, 0x30b8, 0x30d8, 0x30e0, 0x30fc, 0x3140, 0x357c, 0x35a8, 0x35cc, 0x35ec, 0x35ec, 0x3600, 0x5624, 0x56cc, 0x56ec, 0x56f4, 0x5720, 0x5728, 0x575c, 0x580c, 0x5814, 0x5890, 0x589c, 0x58a4, 0x58ac, 0x58b8, 0x58bc, 0x5940, 0x595c, 0x5980, 0x598c, 0x59b0, 0x59c8, 0x59d0, 0x59dc, 0x59fc, 0x5a18, 0x5a60, 0x5a6c, 0x5a80, 0x5a8c, 0x5a94, 0x5a9c, 0x5b94, 0x5bfc, 0x5c10, 0x5e48, 0x5e50, 0x5e94, 0x5ea0, 0x5eb0, 0x5ec0, 0x5ec0, 0x5ec8, 0x5ecc, 0x6000, 0x6020, 0x6028, 0x6040, 0x6058, 0x609c, 0x60a8, 0x619c, 0x7700, 0x7798, 0x77c0, 0x7880, 0x78cc, 0x78fc, 0x7b00, 0x7b58, 0x7b60, 0x7b84, 0x7b8c, 0x7c54, 0x7d00, 0x7d38, 0x7d40, 0x7d84, 0x7d8c, 0x7ddc, 0x7de4, 0x7e04, 0x7e10, 0x7e1c, 0x7e24, 0x7e38, 0x7e40, 0x7e44, 0x7e4c, 0x7e78, 0x7e80, 0x7edc, 0x7ee8, 0x7efc, 0x8dc0, 0x8de4, 0x8df8, 0x8e04, 0x8e10, 0x8e84, 0x8ea0, 0x8f88, 0x8fb8, 0x9058, 0x9060, 0x9060, 0x9068, 0x90f8, 0x9100, 0x9124, 0x9400, 0x9470, 0x9600, 0x9600, 0x9608, 0x9638, 0x9640, 0x9704, 0x9710, 0x971c, 0x9800, 0x9808, 0x9820, 0x983c, 0x9850, 0x9864, 0x9c00, 0x9c6c, 0x9c80, 0x9cec, 0x9d00, 0x9d6c, 0x9d80, 0x9dec, 0x9e00, 0x9e6c, 0x9e80, 0x9eec, 0x9f00, 0x9f6c, 0x9f80, 0xa020, 0xd004, 0xd03c, 0xd100, 0xd118, 0xd200, 0xd214, 0xd220, 0xd234, 0xd240, 0xd254, 0xd260, 0xd274, 0xd280, 0xd294, 0xd2a0, 0xd2b4, 0xd2c0, 0xd2d4, 0xd2e0, 0xd2f4, 0xd300, 0xd31c, 0xdfc0, 0xdfe0, 0xe000, 0xf008, 0x11000, 0x11014, 0x11048, 0x1106c, 0x11074, 0x11088, 0x11098, 0x11120, 0x1112c, 0x1117c, 0x11190, 0x112e0, 0x11300, 0x1130c, 0x12000, 0x1206c, 0x19040, 0x1906c, 0x19078, 0x19080, 0x1908c, 0x190e8, 0x190f0, 0x190f8, 0x19100, 0x19110, 0x19120, 0x19124, 0x19150, 0x19194, 0x1919c, 0x191b0, 0x191d0, 0x191e8, 0x19238, 0x192b0, 0x192bc, 0x192bc, 0x19348, 0x1934c, 0x193f8, 0x19418, 0x19420, 0x19428, 0x19430, 0x19444, 0x1944c, 0x1946c, 0x19474, 0x19474, 0x19490, 0x194cc, 0x194f0, 0x194f8, 0x19c00, 0x19c48, 0x19c50, 0x19c80, 0x19c94, 0x19c98, 0x19ca0, 0x19cbc, 0x19ce4, 0x19ce4, 0x19cf0, 0x19cf8, 0x19d00, 0x19d28, 0x19d50, 0x19d78, 0x19d94, 0x19d98, 0x19da0, 0x19dc8, 0x19df0, 0x19e10, 0x19e50, 0x19e6c, 0x19ea0, 0x19ebc, 0x19ec4, 0x19ef4, 0x19f04, 0x19f2c, 0x19f34, 0x19f34, 0x19f40, 0x19f50, 0x19f90, 0x19fac, 0x19fc4, 0x19fc8, 0x19fd0, 0x19fe4, 0x1a000, 0x1a004, 0x1a010, 0x1a06c, 0x1a0b0, 0x1a0e4, 0x1a0ec, 0x1a0f8, 0x1a100, 0x1a108, 0x1a114, 0x1a120, 0x1a128, 0x1a130, 0x1a138, 0x1a138, 0x1a190, 0x1a1c4, 0x1a1fc, 0x1a1fc, 0x1e008, 0x1e00c, 0x1e040, 0x1e044, 0x1e04c, 0x1e04c, 0x1e284, 0x1e290, 0x1e2c0, 0x1e2c0, 0x1e2e0, 0x1e2e0, 0x1e300, 0x1e384, 0x1e3c0, 0x1e3c8, 0x1e408, 0x1e40c, 0x1e440, 0x1e444, 0x1e44c, 0x1e44c, 0x1e684, 0x1e690, 0x1e6c0, 0x1e6c0, 0x1e6e0, 0x1e6e0, 0x1e700, 0x1e784, 0x1e7c0, 0x1e7c8, 0x1e808, 0x1e80c, 0x1e840, 0x1e844, 0x1e84c, 0x1e84c, 0x1ea84, 0x1ea90, 0x1eac0, 0x1eac0, 0x1eae0, 0x1eae0, 0x1eb00, 0x1eb84, 0x1ebc0, 0x1ebc8, 0x1ec08, 0x1ec0c, 0x1ec40, 0x1ec44, 0x1ec4c, 0x1ec4c, 0x1ee84, 0x1ee90, 0x1eec0, 0x1eec0, 0x1eee0, 0x1eee0, 0x1ef00, 0x1ef84, 0x1efc0, 0x1efc8, 0x1f008, 0x1f00c, 0x1f040, 0x1f044, 0x1f04c, 0x1f04c, 0x1f284, 0x1f290, 0x1f2c0, 0x1f2c0, 0x1f2e0, 0x1f2e0, 0x1f300, 0x1f384, 0x1f3c0, 0x1f3c8, 0x1f408, 0x1f40c, 0x1f440, 0x1f444, 0x1f44c, 0x1f44c, 0x1f684, 0x1f690, 0x1f6c0, 0x1f6c0, 0x1f6e0, 0x1f6e0, 0x1f700, 0x1f784, 0x1f7c0, 0x1f7c8, 0x1f808, 0x1f80c, 0x1f840, 0x1f844, 0x1f84c, 0x1f84c, 0x1fa84, 0x1fa90, 0x1fac0, 0x1fac0, 0x1fae0, 0x1fae0, 0x1fb00, 0x1fb84, 0x1fbc0, 0x1fbc8, 0x1fc08, 0x1fc0c, 0x1fc40, 0x1fc44, 0x1fc4c, 0x1fc4c, 0x1fe84, 0x1fe90, 0x1fec0, 0x1fec0, 0x1fee0, 0x1fee0, 0x1ff00, 0x1ff84, 0x1ffc0, 0x1ffc8, 0x30000, 0x30030, 0x30038, 0x30038, 0x30040, 0x30040, 0x30048, 0x30048, 0x30050, 0x30050, 0x3005c, 0x30060, 0x30068, 0x30068, 0x30070, 0x30070, 0x30100, 0x30168, 0x30190, 0x301a0, 0x301a8, 0x301b8, 0x301c4, 0x301c8, 0x301d0, 0x301d0, 0x30200, 0x30320, 0x30400, 0x304b4, 0x304c0, 0x3052c, 0x30540, 0x3061c, 0x30800, 0x308a0, 0x308c0, 0x30908, 0x30910, 0x309b8, 0x30a00, 0x30a04, 0x30a0c, 0x30a14, 0x30a1c, 0x30a2c, 0x30a44, 0x30a50, 0x30a74, 0x30a74, 0x30a7c, 0x30afc, 0x30b08, 0x30c24, 0x30d00, 0x30d14, 0x30d1c, 0x30d3c, 0x30d44, 0x30d4c, 0x30d54, 0x30d74, 0x30d7c, 0x30d7c, 0x30de0, 0x30de0, 0x30e00, 0x30ed4, 0x30f00, 0x30fa4, 0x30fc0, 0x30fc4, 0x31000, 0x31004, 0x31080, 0x310fc, 0x31208, 0x31220, 0x3123c, 0x31254, 0x31300, 0x31300, 0x31308, 0x3131c, 0x31338, 0x3133c, 0x31380, 0x31380, 0x31388, 0x313a8, 0x313b4, 0x313b4, 0x31400, 0x31420, 0x31438, 0x3143c, 0x31480, 0x31480, 0x314a8, 0x314a8, 0x314b0, 0x314b4, 0x314c8, 0x314d4, 0x31a40, 0x31a4c, 0x31af0, 0x31b20, 0x31b38, 0x31b3c, 0x31b80, 0x31b80, 0x31ba8, 0x31ba8, 0x31bb0, 0x31bb4, 0x31bc8, 0x31bd4, 0x32140, 0x3218c, 0x321f0, 0x321f4, 0x32200, 0x32200, 0x32218, 0x32218, 0x32400, 0x32400, 0x32408, 0x3241c, 0x32618, 0x32620, 0x32664, 0x32664, 0x326a8, 0x326a8, 0x326ec, 0x326ec, 0x32a00, 0x32abc, 0x32b00, 0x32b38, 0x32b40, 0x32b58, 0x32b60, 0x32b78, 0x32c00, 0x32c00, 0x32c08, 0x32c3c, 0x32e00, 0x32e2c, 0x32f00, 0x32f2c, 0x33000, 0x3302c, 0x33034, 0x33050, 0x33058, 0x33058, 0x33060, 0x3308c, 0x3309c, 0x330ac, 0x330c0, 0x330c0, 0x330c8, 0x330d0, 0x330d8, 0x330e0, 0x330ec, 0x3312c, 0x33134, 0x33150, 0x33158, 0x33158, 0x33160, 0x3318c, 0x3319c, 0x331ac, 0x331c0, 0x331c0, 0x331c8, 0x331d0, 0x331d8, 0x331e0, 0x331ec, 0x33290, 0x33298, 0x332c4, 0x332e4, 0x33390, 0x33398, 0x333c4, 0x333e4, 0x3342c, 0x33434, 0x33450, 0x33458, 0x33458, 0x33460, 0x3348c, 0x3349c, 0x334ac, 0x334c0, 0x334c0, 0x334c8, 0x334d0, 0x334d8, 0x334e0, 0x334ec, 0x3352c, 0x33534, 0x33550, 0x33558, 0x33558, 0x33560, 0x3358c, 0x3359c, 0x335ac, 0x335c0, 0x335c0, 0x335c8, 0x335d0, 0x335d8, 0x335e0, 0x335ec, 0x33690, 0x33698, 0x336c4, 0x336e4, 0x33790, 0x33798, 0x337c4, 0x337e4, 0x337fc, 0x33814, 0x33814, 0x33854, 0x33868, 0x33880, 0x3388c, 0x338c0, 0x338d0, 0x338e8, 0x338ec, 0x33900, 0x3392c, 0x33934, 0x33950, 0x33958, 0x33958, 0x33960, 0x3398c, 0x3399c, 0x339ac, 0x339c0, 0x339c0, 0x339c8, 0x339d0, 0x339d8, 0x339e0, 0x339ec, 0x33a90, 0x33a98, 0x33ac4, 0x33ae4, 0x33b10, 0x33b24, 0x33b28, 0x33b38, 0x33b50, 0x33bf0, 0x33c10, 0x33c24, 0x33c28, 0x33c38, 0x33c50, 0x33cf0, 0x33cfc, 0x34000, 0x34030, 0x34038, 0x34038, 0x34040, 0x34040, 0x34048, 0x34048, 0x34050, 0x34050, 0x3405c, 0x34060, 0x34068, 0x34068, 0x34070, 0x34070, 0x34100, 0x34168, 0x34190, 0x341a0, 0x341a8, 0x341b8, 0x341c4, 0x341c8, 0x341d0, 0x341d0, 0x34200, 0x34320, 0x34400, 0x344b4, 0x344c0, 0x3452c, 0x34540, 0x3461c, 0x34800, 0x348a0, 0x348c0, 0x34908, 0x34910, 0x349b8, 0x34a00, 0x34a04, 0x34a0c, 0x34a14, 0x34a1c, 0x34a2c, 0x34a44, 0x34a50, 0x34a74, 0x34a74, 0x34a7c, 0x34afc, 0x34b08, 0x34c24, 0x34d00, 0x34d14, 0x34d1c, 0x34d3c, 0x34d44, 0x34d4c, 0x34d54, 0x34d74, 0x34d7c, 0x34d7c, 0x34de0, 0x34de0, 0x34e00, 0x34ed4, 0x34f00, 0x34fa4, 0x34fc0, 0x34fc4, 0x35000, 0x35004, 0x35080, 0x350fc, 0x35208, 0x35220, 0x3523c, 0x35254, 0x35300, 0x35300, 0x35308, 0x3531c, 0x35338, 0x3533c, 0x35380, 0x35380, 0x35388, 0x353a8, 0x353b4, 0x353b4, 0x35400, 0x35420, 0x35438, 0x3543c, 0x35480, 0x35480, 0x354a8, 0x354a8, 0x354b0, 0x354b4, 0x354c8, 0x354d4, 0x35a40, 0x35a4c, 0x35af0, 0x35b20, 0x35b38, 0x35b3c, 0x35b80, 0x35b80, 0x35ba8, 0x35ba8, 0x35bb0, 0x35bb4, 0x35bc8, 0x35bd4, 0x36140, 0x3618c, 0x361f0, 0x361f4, 0x36200, 0x36200, 0x36218, 0x36218, 0x36400, 0x36400, 0x36408, 0x3641c, 0x36618, 0x36620, 0x36664, 0x36664, 0x366a8, 0x366a8, 0x366ec, 0x366ec, 0x36a00, 0x36abc, 0x36b00, 0x36b38, 0x36b40, 0x36b58, 0x36b60, 0x36b78, 0x36c00, 0x36c00, 0x36c08, 0x36c3c, 0x36e00, 0x36e2c, 0x36f00, 0x36f2c, 0x37000, 0x3702c, 0x37034, 0x37050, 0x37058, 0x37058, 0x37060, 0x3708c, 0x3709c, 0x370ac, 0x370c0, 0x370c0, 0x370c8, 0x370d0, 0x370d8, 0x370e0, 0x370ec, 0x3712c, 0x37134, 0x37150, 0x37158, 0x37158, 0x37160, 0x3718c, 0x3719c, 0x371ac, 0x371c0, 0x371c0, 0x371c8, 0x371d0, 0x371d8, 0x371e0, 0x371ec, 0x37290, 0x37298, 0x372c4, 0x372e4, 0x37390, 0x37398, 0x373c4, 0x373e4, 0x3742c, 0x37434, 0x37450, 0x37458, 0x37458, 0x37460, 0x3748c, 0x3749c, 0x374ac, 0x374c0, 0x374c0, 0x374c8, 0x374d0, 0x374d8, 0x374e0, 0x374ec, 0x3752c, 0x37534, 0x37550, 0x37558, 0x37558, 0x37560, 0x3758c, 0x3759c, 0x375ac, 0x375c0, 0x375c0, 0x375c8, 0x375d0, 0x375d8, 0x375e0, 0x375ec, 0x37690, 0x37698, 0x376c4, 0x376e4, 0x37790, 0x37798, 0x377c4, 0x377e4, 0x377fc, 0x37814, 0x37814, 0x37854, 0x37868, 0x37880, 0x3788c, 0x378c0, 0x378d0, 0x378e8, 0x378ec, 0x37900, 0x3792c, 0x37934, 0x37950, 0x37958, 0x37958, 0x37960, 0x3798c, 0x3799c, 0x379ac, 0x379c0, 0x379c0, 0x379c8, 0x379d0, 0x379d8, 0x379e0, 0x379ec, 0x37a90, 0x37a98, 0x37ac4, 0x37ae4, 0x37b10, 0x37b24, 0x37b28, 0x37b38, 0x37b50, 0x37bf0, 0x37c10, 0x37c24, 0x37c28, 0x37c38, 0x37c50, 0x37cf0, 0x37cfc, 0x40040, 0x40040, 0x40080, 0x40084, 0x40100, 0x40100, 0x40140, 0x401bc, 0x40200, 0x40214, 0x40228, 0x40228, 0x40240, 0x40258, 0x40280, 0x40280, 0x40304, 0x40304, 0x40330, 0x4033c, 0x41304, 0x413c8, 0x413d0, 0x413dc, 0x413f0, 0x413f0, 0x41400, 0x4140c, 0x41414, 0x4141c, 0x41480, 0x414d0, 0x44000, 0x4407c, 0x440c0, 0x441ac, 0x441b4, 0x4427c, 0x442c0, 0x443ac, 0x443b4, 0x4447c, 0x444c0, 0x445ac, 0x445b4, 0x4467c, 0x446c0, 0x447ac, 0x447b4, 0x4487c, 0x448c0, 0x449ac, 0x449b4, 0x44a7c, 0x44ac0, 0x44bac, 0x44bb4, 0x44c7c, 0x44cc0, 0x44dac, 0x44db4, 0x44e7c, 0x44ec0, 0x44fac, 0x44fb4, 0x4507c, 0x450c0, 0x451ac, 0x451b4, 0x451fc, 0x45800, 0x45804, 0x45810, 0x45830, 0x45840, 0x45860, 0x45868, 0x45868, 0x45880, 0x45884, 0x458a0, 0x458b0, 0x45a00, 0x45a04, 0x45a10, 0x45a30, 0x45a40, 0x45a60, 0x45a68, 0x45a68, 0x45a80, 0x45a84, 0x45aa0, 0x45ab0, 0x460c0, 0x460e4, 0x47000, 0x4703c, 0x47044, 0x4708c, 0x47200, 0x47250, 0x47400, 0x47408, 0x47414, 0x47420, 0x47600, 0x47618, 0x47800, 0x47814, 0x47820, 0x4782c, 0x50000, 0x50084, 0x50090, 0x500cc, 0x50300, 0x50384, 0x50400, 0x50400, 0x50800, 0x50884, 0x50890, 0x508cc, 0x50b00, 0x50b84, 0x50c00, 0x50c00, 0x51000, 0x51020, 0x51028, 0x510b0, 0x51300, 0x51324, }; u32 *buf_end = (u32 *)((char *)buf + buf_size); const unsigned int *reg_ranges; int reg_ranges_size, range; unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip); /* Select the right set of register ranges to dump depending on the * adapter chip type. */ switch (chip_version) { case CHELSIO_T4: reg_ranges = t4_reg_ranges; reg_ranges_size = ARRAY_SIZE(t4_reg_ranges); break; case CHELSIO_T5: reg_ranges = t5_reg_ranges; reg_ranges_size = ARRAY_SIZE(t5_reg_ranges); break; case CHELSIO_T6: reg_ranges = t6_reg_ranges; reg_ranges_size = ARRAY_SIZE(t6_reg_ranges); break; default: dev_err(adap->pdev_dev, "Unsupported chip version %d\n", chip_version); return; } /* Clear the register buffer and insert the appropriate register * values selected by the above register ranges. */ memset(buf, 0, buf_size); for (range = 0; range < reg_ranges_size; range += 2) { unsigned int reg = reg_ranges[range]; unsigned int last_reg = reg_ranges[range + 1]; u32 *bufp = (u32 *)((char *)buf + reg); /* Iterate across the register range filling in the register * buffer but don't write past the end of the register buffer. */ while (reg <= last_reg && bufp < buf_end) { *bufp++ = t4_read_reg(adap, reg); reg += sizeof(u32); } } } #define EEPROM_STAT_ADDR 0x7bfc #define VPD_BASE 0x400 #define VPD_BASE_OLD 0 #define VPD_LEN 1024 #define CHELSIO_VPD_UNIQUE_ID 0x82 /** * t4_seeprom_wp - enable/disable EEPROM write protection * @adapter: the adapter * @enable: whether to enable or disable write protection * * Enables or disables write protection on the serial EEPROM. */ int t4_seeprom_wp(struct adapter *adapter, bool enable) { unsigned int v = enable ? 0xc : 0; int ret = pci_write_vpd(adapter->pdev, EEPROM_STAT_ADDR, 4, &v); return ret < 0 ? ret : 0; } /** * t4_get_raw_vpd_params - read VPD parameters from VPD EEPROM * @adapter: adapter to read * @p: where to store the parameters * * Reads card parameters stored in VPD EEPROM. */ int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p) { int i, ret = 0, addr; int ec, sn, pn, na; u8 *vpd, csum; unsigned int vpdr_len, kw_offset, id_len; vpd = vmalloc(VPD_LEN); if (!vpd) return -ENOMEM; /* Card information normally starts at VPD_BASE but early cards had * it at 0. */ ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd); if (ret < 0) goto out; /* The VPD shall have a unique identifier specified by the PCI SIG. * For chelsio adapters, the identifier is 0x82. The first byte of a VPD * shall be CHELSIO_VPD_UNIQUE_ID (0x82). The VPD programming software * is expected to automatically put this entry at the * beginning of the VPD. */ addr = *vpd == CHELSIO_VPD_UNIQUE_ID ? VPD_BASE : VPD_BASE_OLD; ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd); if (ret < 0) goto out; if (vpd[0] != PCI_VPD_LRDT_ID_STRING) { dev_err(adapter->pdev_dev, "missing VPD ID string\n"); ret = -EINVAL; goto out; } id_len = pci_vpd_lrdt_size(vpd); if (id_len > ID_LEN) id_len = ID_LEN; i = pci_vpd_find_tag(vpd, 0, VPD_LEN, PCI_VPD_LRDT_RO_DATA); if (i < 0) { dev_err(adapter->pdev_dev, "missing VPD-R section\n"); ret = -EINVAL; goto out; } vpdr_len = pci_vpd_lrdt_size(&vpd[i]); kw_offset = i + PCI_VPD_LRDT_TAG_SIZE; if (vpdr_len + kw_offset > VPD_LEN) { dev_err(adapter->pdev_dev, "bad VPD-R length %u\n", vpdr_len); ret = -EINVAL; goto out; } #define FIND_VPD_KW(var, name) do { \ var = pci_vpd_find_info_keyword(vpd, kw_offset, vpdr_len, name); \ if (var < 0) { \ dev_err(adapter->pdev_dev, "missing VPD keyword " name "\n"); \ ret = -EINVAL; \ goto out; \ } \ var += PCI_VPD_INFO_FLD_HDR_SIZE; \ } while (0) FIND_VPD_KW(i, "RV"); for (csum = 0; i >= 0; i--) csum += vpd[i]; if (csum) { dev_err(adapter->pdev_dev, "corrupted VPD EEPROM, actual csum %u\n", csum); ret = -EINVAL; goto out; } FIND_VPD_KW(ec, "EC"); FIND_VPD_KW(sn, "SN"); FIND_VPD_KW(pn, "PN"); FIND_VPD_KW(na, "NA"); #undef FIND_VPD_KW memcpy(p->id, vpd + PCI_VPD_LRDT_TAG_SIZE, id_len); strim(p->id); memcpy(p->ec, vpd + ec, EC_LEN); strim(p->ec); i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE); memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); strim(p->sn); i = pci_vpd_info_field_size(vpd + pn - PCI_VPD_INFO_FLD_HDR_SIZE); memcpy(p->pn, vpd + pn, min(i, PN_LEN)); strim(p->pn); memcpy(p->na, vpd + na, min(i, MACADDR_LEN)); strim((char *)p->na); out: vfree(vpd); return ret; } /** * t4_get_vpd_params - read VPD parameters & retrieve Core Clock * @adapter: adapter to read * @p: where to store the parameters * * Reads card parameters stored in VPD EEPROM and retrieves the Core * Clock. This can only be called after a connection to the firmware * is established. */ int t4_get_vpd_params(struct adapter *adapter, struct vpd_params *p) { u32 cclk_param, cclk_val; int ret; /* Grab the raw VPD parameters. */ ret = t4_get_raw_vpd_params(adapter, p); if (ret) return ret; /* Ask firmware for the Core Clock since it knows how to translate the * Reference Clock ('V2') VPD field into a Core Clock value ... */ cclk_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CCLK)); ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0, 1, &cclk_param, &cclk_val); if (ret) return ret; p->cclk = cclk_val; return 0; } /* serial flash and firmware constants */ enum { SF_ATTEMPTS = 10, /* max retries for SF operations */ /* flash command opcodes */ SF_PROG_PAGE = 2, /* program page */ SF_WR_DISABLE = 4, /* disable writes */ SF_RD_STATUS = 5, /* read status register */ SF_WR_ENABLE = 6, /* enable writes */ SF_RD_DATA_FAST = 0xb, /* read flash */ SF_RD_ID = 0x9f, /* read ID */ SF_ERASE_SECTOR = 0xd8, /* erase sector */ FW_MAX_SIZE = 16 * SF_SEC_SIZE, }; /** * sf1_read - read data from the serial flash * @adapter: the adapter * @byte_cnt: number of bytes to read * @cont: whether another operation will be chained * @lock: whether to lock SF for PL access only * @valp: where to store the read data * * Reads up to 4 bytes of data from the serial flash. The location of * the read needs to be specified prior to calling this by issuing the * appropriate commands to the serial flash. */ static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont, int lock, u32 *valp) { int ret; if (!byte_cnt || byte_cnt > 4) return -EINVAL; if (t4_read_reg(adapter, SF_OP_A) & SF_BUSY_F) return -EBUSY; t4_write_reg(adapter, SF_OP_A, SF_LOCK_V(lock) | SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1)); ret = t4_wait_op_done(adapter, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 5); if (!ret) *valp = t4_read_reg(adapter, SF_DATA_A); return ret; } /** * sf1_write - write data to the serial flash * @adapter: the adapter * @byte_cnt: number of bytes to write * @cont: whether another operation will be chained * @lock: whether to lock SF for PL access only * @val: value to write * * Writes up to 4 bytes of data to the serial flash. The location of * the write needs to be specified prior to calling this by issuing the * appropriate commands to the serial flash. */ static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont, int lock, u32 val) { if (!byte_cnt || byte_cnt > 4) return -EINVAL; if (t4_read_reg(adapter, SF_OP_A) & SF_BUSY_F) return -EBUSY; t4_write_reg(adapter, SF_DATA_A, val); t4_write_reg(adapter, SF_OP_A, SF_LOCK_V(lock) | SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1) | OP_V(1)); return t4_wait_op_done(adapter, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 5); } /** * flash_wait_op - wait for a flash operation to complete * @adapter: the adapter * @attempts: max number of polls of the status register * @delay: delay between polls in ms * * Wait for a flash operation to complete by polling the status register. */ static int flash_wait_op(struct adapter *adapter, int attempts, int delay) { int ret; u32 status; while (1) { if ((ret = sf1_write(adapter, 1, 1, 1, SF_RD_STATUS)) != 0 || (ret = sf1_read(adapter, 1, 0, 1, &status)) != 0) return ret; if (!(status & 1)) return 0; if (--attempts == 0) return -EAGAIN; if (delay) msleep(delay); } } /** * t4_read_flash - read words from serial flash * @adapter: the adapter * @addr: the start address for the read * @nwords: how many 32-bit words to read * @data: where to store the read data * @byte_oriented: whether to store data as bytes or as words * * Read the specified number of 32-bit words from the serial flash. * If @byte_oriented is set the read data is stored as a byte array * (i.e., big-endian), otherwise as 32-bit words in the platform's * natural endianness. */ int t4_read_flash(struct adapter *adapter, unsigned int addr, unsigned int nwords, u32 *data, int byte_oriented) { int ret; if (addr + nwords * sizeof(u32) > adapter->params.sf_size || (addr & 3)) return -EINVAL; addr = swab32(addr) | SF_RD_DATA_FAST; if ((ret = sf1_write(adapter, 4, 1, 0, addr)) != 0 || (ret = sf1_read(adapter, 1, 1, 0, data)) != 0) return ret; for ( ; nwords; nwords--, data++) { ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data); if (nwords == 1) t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */ if (ret) return ret; if (byte_oriented) *data = (__force __u32)(cpu_to_be32(*data)); } return 0; } /** * t4_write_flash - write up to a page of data to the serial flash * @adapter: the adapter * @addr: the start address to write * @n: length of data to write in bytes * @data: the data to write * * Writes up to a page of data (256 bytes) to the serial flash starting * at the given address. All the data must be written to the same page. */ static int t4_write_flash(struct adapter *adapter, unsigned int addr, unsigned int n, const u8 *data) { int ret; u32 buf[64]; unsigned int i, c, left, val, offset = addr & 0xff; if (addr >= adapter->params.sf_size || offset + n > SF_PAGE_SIZE) return -EINVAL; val = swab32(addr) | SF_PROG_PAGE; if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 || (ret = sf1_write(adapter, 4, 1, 1, val)) != 0) goto unlock; for (left = n; left; left -= c) { c = min(left, 4U); for (val = 0, i = 0; i < c; ++i) val = (val << 8) + *data++; ret = sf1_write(adapter, c, c != left, 1, val); if (ret) goto unlock; } ret = flash_wait_op(adapter, 8, 1); if (ret) goto unlock; t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */ /* Read the page to verify the write succeeded */ ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1); if (ret) return ret; if (memcmp(data - n, (u8 *)buf + offset, n)) { dev_err(adapter->pdev_dev, "failed to correctly write the flash page at %#x\n", addr); return -EIO; } return 0; unlock: t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */ return ret; } /** * t4_get_fw_version - read the firmware version * @adapter: the adapter * @vers: where to place the version * * Reads the FW version from flash. */ int t4_get_fw_version(struct adapter *adapter, u32 *vers) { return t4_read_flash(adapter, FLASH_FW_START + offsetof(struct fw_hdr, fw_ver), 1, vers, 0); } /** * t4_get_tp_version - read the TP microcode version * @adapter: the adapter * @vers: where to place the version * * Reads the TP microcode version from flash. */ int t4_get_tp_version(struct adapter *adapter, u32 *vers) { return t4_read_flash(adapter, FLASH_FW_START + offsetof(struct fw_hdr, tp_microcode_ver), 1, vers, 0); } /** * t4_get_exprom_version - return the Expansion ROM version (if any) * @adapter: the adapter * @vers: where to place the version * * Reads the Expansion ROM header from FLASH and returns the version * number (if present) through the @vers return value pointer. We return * this in the Firmware Version Format since it's convenient. Return * 0 on success, -ENOENT if no Expansion ROM is present. */ int t4_get_exprom_version(struct adapter *adap, u32 *vers) { struct exprom_header { unsigned char hdr_arr[16]; /* must start with 0x55aa */ unsigned char hdr_ver[4]; /* Expansion ROM version */ } *hdr; u32 exprom_header_buf[DIV_ROUND_UP(sizeof(struct exprom_header), sizeof(u32))]; int ret; ret = t4_read_flash(adap, FLASH_EXP_ROM_START, ARRAY_SIZE(exprom_header_buf), exprom_header_buf, 0); if (ret) return ret; hdr = (struct exprom_header *)exprom_header_buf; if (hdr->hdr_arr[0] != 0x55 || hdr->hdr_arr[1] != 0xaa) return -ENOENT; *vers = (FW_HDR_FW_VER_MAJOR_V(hdr->hdr_ver[0]) | FW_HDR_FW_VER_MINOR_V(hdr->hdr_ver[1]) | FW_HDR_FW_VER_MICRO_V(hdr->hdr_ver[2]) | FW_HDR_FW_VER_BUILD_V(hdr->hdr_ver[3])); return 0; } /** * t4_check_fw_version - check if the FW is supported with this driver * @adap: the adapter * * Checks if an adapter's FW is compatible with the driver. Returns 0 * if there's exact match, a negative error if the version could not be * read or there's a major version mismatch */ int t4_check_fw_version(struct adapter *adap) { int i, ret, major, minor, micro; int exp_major, exp_minor, exp_micro; unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip); ret = t4_get_fw_version(adap, &adap->params.fw_vers); /* Try multiple times before returning error */ for (i = 0; (ret == -EBUSY || ret == -EAGAIN) && i < 3; i++) ret = t4_get_fw_version(adap, &adap->params.fw_vers); if (ret) return ret; major = FW_HDR_FW_VER_MAJOR_G(adap->params.fw_vers); minor = FW_HDR_FW_VER_MINOR_G(adap->params.fw_vers); micro = FW_HDR_FW_VER_MICRO_G(adap->params.fw_vers); switch (chip_version) { case CHELSIO_T4: exp_major = T4FW_MIN_VERSION_MAJOR; exp_minor = T4FW_MIN_VERSION_MINOR; exp_micro = T4FW_MIN_VERSION_MICRO; break; case CHELSIO_T5: exp_major = T5FW_MIN_VERSION_MAJOR; exp_minor = T5FW_MIN_VERSION_MINOR; exp_micro = T5FW_MIN_VERSION_MICRO; break; case CHELSIO_T6: exp_major = T6FW_MIN_VERSION_MAJOR; exp_minor = T6FW_MIN_VERSION_MINOR; exp_micro = T6FW_MIN_VERSION_MICRO; break; default: dev_err(adap->pdev_dev, "Unsupported chip type, %x\n", adap->chip); return -EINVAL; } if (major < exp_major || (major == exp_major && minor < exp_minor) || (major == exp_major && minor == exp_minor && micro < exp_micro)) { dev_err(adap->pdev_dev, "Card has firmware version %u.%u.%u, minimum " "supported firmware is %u.%u.%u.\n", major, minor, micro, exp_major, exp_minor, exp_micro); return -EFAULT; } return 0; } /* Is the given firmware API compatible with the one the driver was compiled * with? */ static int fw_compatible(const struct fw_hdr *hdr1, const struct fw_hdr *hdr2) { /* short circuit if it's the exact same firmware version */ if (hdr1->chip == hdr2->chip && hdr1->fw_ver == hdr2->fw_ver) return 1; #define SAME_INTF(x) (hdr1->intfver_##x == hdr2->intfver_##x) if (hdr1->chip == hdr2->chip && SAME_INTF(nic) && SAME_INTF(vnic) && SAME_INTF(ri) && SAME_INTF(iscsi) && SAME_INTF(fcoe)) return 1; #undef SAME_INTF return 0; } /* The firmware in the filesystem is usable, but should it be installed? * This routine explains itself in detail if it indicates the filesystem * firmware should be installed. */ static int should_install_fs_fw(struct adapter *adap, int card_fw_usable, int k, int c) { const char *reason; if (!card_fw_usable) { reason = "incompatible or unusable"; goto install; } if (k > c) { reason = "older than the version supported with this driver"; goto install; } return 0; install: dev_err(adap->pdev_dev, "firmware on card (%u.%u.%u.%u) is %s, " "installing firmware %u.%u.%u.%u on card.\n", FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c), FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), reason, FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k), FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k)); return 1; } int t4_prep_fw(struct adapter *adap, struct fw_info *fw_info, const u8 *fw_data, unsigned int fw_size, struct fw_hdr *card_fw, enum dev_state state, int *reset) { int ret, card_fw_usable, fs_fw_usable; const struct fw_hdr *fs_fw; const struct fw_hdr *drv_fw; drv_fw = &fw_info->fw_hdr; /* Read the header of the firmware on the card */ ret = t4_read_flash(adap, FLASH_FW_START, sizeof(*card_fw) / sizeof(uint32_t), (uint32_t *)card_fw, 1); if (ret == 0) { card_fw_usable = fw_compatible(drv_fw, (const void *)card_fw); } else { dev_err(adap->pdev_dev, "Unable to read card's firmware header: %d\n", ret); card_fw_usable = 0; } if (fw_data != NULL) { fs_fw = (const void *)fw_data; fs_fw_usable = fw_compatible(drv_fw, fs_fw); } else { fs_fw = NULL; fs_fw_usable = 0; } if (card_fw_usable && card_fw->fw_ver == drv_fw->fw_ver && (!fs_fw_usable || fs_fw->fw_ver == drv_fw->fw_ver)) { /* Common case: the firmware on the card is an exact match and * the filesystem one is an exact match too, or the filesystem * one is absent/incompatible. */ } else if (fs_fw_usable && state == DEV_STATE_UNINIT && should_install_fs_fw(adap, card_fw_usable, be32_to_cpu(fs_fw->fw_ver), be32_to_cpu(card_fw->fw_ver))) { ret = t4_fw_upgrade(adap, adap->mbox, fw_data, fw_size, 0); if (ret != 0) { dev_err(adap->pdev_dev, "failed to install firmware: %d\n", ret); goto bye; } /* Installed successfully, update the cached header too. */ *card_fw = *fs_fw; card_fw_usable = 1; *reset = 0; /* already reset as part of load_fw */ } if (!card_fw_usable) { uint32_t d, c, k; d = be32_to_cpu(drv_fw->fw_ver); c = be32_to_cpu(card_fw->fw_ver); k = fs_fw ? be32_to_cpu(fs_fw->fw_ver) : 0; dev_err(adap->pdev_dev, "Cannot find a usable firmware: " "chip state %d, " "driver compiled with %d.%d.%d.%d, " "card has %d.%d.%d.%d, filesystem has %d.%d.%d.%d\n", state, FW_HDR_FW_VER_MAJOR_G(d), FW_HDR_FW_VER_MINOR_G(d), FW_HDR_FW_VER_MICRO_G(d), FW_HDR_FW_VER_BUILD_G(d), FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c), FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k), FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k)); ret = -EINVAL; goto bye; } /* We're using whatever's on the card and it's known to be good. */ adap->params.fw_vers = be32_to_cpu(card_fw->fw_ver); adap->params.tp_vers = be32_to_cpu(card_fw->tp_microcode_ver); bye: return ret; } /** * t4_flash_erase_sectors - erase a range of flash sectors * @adapter: the adapter * @start: the first sector to erase * @end: the last sector to erase * * Erases the sectors in the given inclusive range. */ static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end) { int ret = 0; if (end >= adapter->params.sf_nsec) return -EINVAL; while (start <= end) { if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 || (ret = sf1_write(adapter, 4, 0, 1, SF_ERASE_SECTOR | (start << 8))) != 0 || (ret = flash_wait_op(adapter, 14, 500)) != 0) { dev_err(adapter->pdev_dev, "erase of flash sector %d failed, error %d\n", start, ret); break; } start++; } t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */ return ret; } /** * t4_flash_cfg_addr - return the address of the flash configuration file * @adapter: the adapter * * Return the address within the flash where the Firmware Configuration * File is stored. */ unsigned int t4_flash_cfg_addr(struct adapter *adapter) { if (adapter->params.sf_size == 0x100000) return FLASH_FPGA_CFG_START; else return FLASH_CFG_START; } /* Return TRUE if the specified firmware matches the adapter. I.e. T4 * firmware for T4 adapters, T5 firmware for T5 adapters, etc. We go ahead * and emit an error message for mismatched firmware to save our caller the * effort ... */ static bool t4_fw_matches_chip(const struct adapter *adap, const struct fw_hdr *hdr) { /* The expression below will return FALSE for any unsupported adapter * which will keep us "honest" in the future ... */ if ((is_t4(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T4) || (is_t5(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T5) || (is_t6(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T6)) return true; dev_err(adap->pdev_dev, "FW image (%d) is not suitable for this adapter (%d)\n", hdr->chip, CHELSIO_CHIP_VERSION(adap->params.chip)); return false; } /** * t4_load_fw - download firmware * @adap: the adapter * @fw_data: the firmware image to write * @size: image size * * Write the supplied firmware image to the card's serial flash. */ int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size) { u32 csum; int ret, addr; unsigned int i; u8 first_page[SF_PAGE_SIZE]; const __be32 *p = (const __be32 *)fw_data; const struct fw_hdr *hdr = (const struct fw_hdr *)fw_data; unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec; unsigned int fw_img_start = adap->params.sf_fw_start; unsigned int fw_start_sec = fw_img_start / sf_sec_size; if (!size) { dev_err(adap->pdev_dev, "FW image has no data\n"); return -EINVAL; } if (size & 511) { dev_err(adap->pdev_dev, "FW image size not multiple of 512 bytes\n"); return -EINVAL; } if ((unsigned int)be16_to_cpu(hdr->len512) * 512 != size) { dev_err(adap->pdev_dev, "FW image size differs from size in FW header\n"); return -EINVAL; } if (size > FW_MAX_SIZE) { dev_err(adap->pdev_dev, "FW image too large, max is %u bytes\n", FW_MAX_SIZE); return -EFBIG; } if (!t4_fw_matches_chip(adap, hdr)) return -EINVAL; for (csum = 0, i = 0; i < size / sizeof(csum); i++) csum += be32_to_cpu(p[i]); if (csum != 0xffffffff) { dev_err(adap->pdev_dev, "corrupted firmware image, checksum %#x\n", csum); return -EINVAL; } i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */ ret = t4_flash_erase_sectors(adap, fw_start_sec, fw_start_sec + i - 1); if (ret) goto out; /* * We write the correct version at the end so the driver can see a bad * version if the FW write fails. Start by writing a copy of the * first page with a bad version. */ memcpy(first_page, fw_data, SF_PAGE_SIZE); ((struct fw_hdr *)first_page)->fw_ver = cpu_to_be32(0xffffffff); ret = t4_write_flash(adap, fw_img_start, SF_PAGE_SIZE, first_page); if (ret) goto out; addr = fw_img_start; for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) { addr += SF_PAGE_SIZE; fw_data += SF_PAGE_SIZE; ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data); if (ret) goto out; } ret = t4_write_flash(adap, fw_img_start + offsetof(struct fw_hdr, fw_ver), sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver); out: if (ret) dev_err(adap->pdev_dev, "firmware download failed, error %d\n", ret); else ret = t4_get_fw_version(adap, &adap->params.fw_vers); return ret; } /** * t4_phy_fw_ver - return current PHY firmware version * @adap: the adapter * @phy_fw_ver: return value buffer for PHY firmware version * * Returns the current version of external PHY firmware on the * adapter. */ int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver) { u32 param, val; int ret; param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) | FW_PARAMS_PARAM_Y_V(adap->params.portvec) | FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_VERSION)); ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val); if (ret) return ret; *phy_fw_ver = val; return 0; } /** * t4_load_phy_fw - download port PHY firmware * @adap: the adapter * @win: the PCI-E Memory Window index to use for t4_memory_rw() * @win_lock: the lock to use to guard the memory copy * @phy_fw_version: function to check PHY firmware versions * @phy_fw_data: the PHY firmware image to write * @phy_fw_size: image size * * Transfer the specified PHY firmware to the adapter. If a non-NULL * @phy_fw_version is supplied, then it will be used to determine if * it's necessary to perform the transfer by comparing the version * of any existing adapter PHY firmware with that of the passed in * PHY firmware image. If @win_lock is non-NULL then it will be used * around the call to t4_memory_rw() which transfers the PHY firmware * to the adapter. * * A negative error number will be returned if an error occurs. If * version number support is available and there's no need to upgrade * the firmware, 0 will be returned. If firmware is successfully * transferred to the adapter, 1 will be retured. * * NOTE: some adapters only have local RAM to store the PHY firmware. As * a result, a RESET of the adapter would cause that RAM to lose its * contents. Thus, loading PHY firmware on such adapters must happen * after any FW_RESET_CMDs ... */ int t4_load_phy_fw(struct adapter *adap, int win, spinlock_t *win_lock, int (*phy_fw_version)(const u8 *, size_t), const u8 *phy_fw_data, size_t phy_fw_size) { unsigned long mtype = 0, maddr = 0; u32 param, val; int cur_phy_fw_ver = 0, new_phy_fw_vers = 0; int ret; /* If we have version number support, then check to see if the adapter * already has up-to-date PHY firmware loaded. */ if (phy_fw_version) { new_phy_fw_vers = phy_fw_version(phy_fw_data, phy_fw_size); ret = t4_phy_fw_ver(adap, &cur_phy_fw_ver); if (ret < 0) return ret; if (cur_phy_fw_ver >= new_phy_fw_vers) { CH_WARN(adap, "PHY Firmware already up-to-date, " "version %#x\n", cur_phy_fw_ver); return 0; } } /* Ask the firmware where it wants us to copy the PHY firmware image. * The size of the file requires a special version of the READ coommand * which will pass the file size via the values field in PARAMS_CMD and * retrieve the return value from firmware and place it in the same * buffer values */ param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) | FW_PARAMS_PARAM_Y_V(adap->params.portvec) | FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD)); val = phy_fw_size; ret = t4_query_params_rw(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val, 1); if (ret < 0) return ret; mtype = val >> 8; maddr = (val & 0xff) << 16; /* Copy the supplied PHY Firmware image to the adapter memory location * allocated by the adapter firmware. */ if (win_lock) spin_lock_bh(win_lock); ret = t4_memory_rw(adap, win, mtype, maddr, phy_fw_size, (__be32 *)phy_fw_data, T4_MEMORY_WRITE); if (win_lock) spin_unlock_bh(win_lock); if (ret) return ret; /* Tell the firmware that the PHY firmware image has been written to * RAM and it can now start copying it over to the PHYs. The chip * firmware will RESET the affected PHYs as part of this operation * leaving them running the new PHY firmware image. */ param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) | FW_PARAMS_PARAM_Y_V(adap->params.portvec) | FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD)); ret = t4_set_params_timeout(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val, 30000); /* If we have version number support, then check to see that the new * firmware got loaded properly. */ if (phy_fw_version) { ret = t4_phy_fw_ver(adap, &cur_phy_fw_ver); if (ret < 0) return ret; if (cur_phy_fw_ver != new_phy_fw_vers) { CH_WARN(adap, "PHY Firmware did not update: " "version on adapter %#x, " "version flashed %#x\n", cur_phy_fw_ver, new_phy_fw_vers); return -ENXIO; } } return 1; } /** * t4_fwcache - firmware cache operation * @adap: the adapter * @op : the operation (flush or flush and invalidate) */ int t4_fwcache(struct adapter *adap, enum fw_params_param_dev_fwcache op) { struct fw_params_cmd c; memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | FW_PARAMS_CMD_PFN_V(adap->pf) | FW_PARAMS_CMD_VFN_V(0)); c.retval_len16 = cpu_to_be32(FW_LEN16(c)); c.param[0].mnem = cpu_to_be32(FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FWCACHE)); c.param[0].val = cpu_to_be32(op); return t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), NULL); } void t4_cim_read_pif_la(struct adapter *adap, u32 *pif_req, u32 *pif_rsp, unsigned int *pif_req_wrptr, unsigned int *pif_rsp_wrptr) { int i, j; u32 cfg, val, req, rsp; cfg = t4_read_reg(adap, CIM_DEBUGCFG_A); if (cfg & LADBGEN_F) t4_write_reg(adap, CIM_DEBUGCFG_A, cfg ^ LADBGEN_F); val = t4_read_reg(adap, CIM_DEBUGSTS_A); req = POLADBGWRPTR_G(val); rsp = PILADBGWRPTR_G(val); if (pif_req_wrptr) *pif_req_wrptr = req; if (pif_rsp_wrptr) *pif_rsp_wrptr = rsp; for (i = 0; i < CIM_PIFLA_SIZE; i++) { for (j = 0; j < 6; j++) { t4_write_reg(adap, CIM_DEBUGCFG_A, POLADBGRDPTR_V(req) | PILADBGRDPTR_V(rsp)); *pif_req++ = t4_read_reg(adap, CIM_PO_LA_DEBUGDATA_A); *pif_rsp++ = t4_read_reg(adap, CIM_PI_LA_DEBUGDATA_A); req++; rsp++; } req = (req + 2) & POLADBGRDPTR_M; rsp = (rsp + 2) & PILADBGRDPTR_M; } t4_write_reg(adap, CIM_DEBUGCFG_A, cfg); } void t4_cim_read_ma_la(struct adapter *adap, u32 *ma_req, u32 *ma_rsp) { u32 cfg; int i, j, idx; cfg = t4_read_reg(adap, CIM_DEBUGCFG_A); if (cfg & LADBGEN_F) t4_write_reg(adap, CIM_DEBUGCFG_A, cfg ^ LADBGEN_F); for (i = 0; i < CIM_MALA_SIZE; i++) { for (j = 0; j < 5; j++) { idx = 8 * i + j; t4_write_reg(adap, CIM_DEBUGCFG_A, POLADBGRDPTR_V(idx) | PILADBGRDPTR_V(idx)); *ma_req++ = t4_read_reg(adap, CIM_PO_LA_MADEBUGDATA_A); *ma_rsp++ = t4_read_reg(adap, CIM_PI_LA_MADEBUGDATA_A); } } t4_write_reg(adap, CIM_DEBUGCFG_A, cfg); } void t4_ulprx_read_la(struct adapter *adap, u32 *la_buf) { unsigned int i, j; for (i = 0; i < 8; i++) { u32 *p = la_buf + i; t4_write_reg(adap, ULP_RX_LA_CTL_A, i); j = t4_read_reg(adap, ULP_RX_LA_WRPTR_A); t4_write_reg(adap, ULP_RX_LA_RDPTR_A, j); for (j = 0; j < ULPRX_LA_SIZE; j++, p += 8) *p = t4_read_reg(adap, ULP_RX_LA_RDDATA_A); } } #define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ FW_PORT_CAP_ANEG) /** * t4_link_l1cfg - apply link configuration to MAC/PHY * @phy: the PHY to setup * @mac: the MAC to setup * @lc: the requested link configuration * * Set up a port's MAC and PHY according to a desired link configuration. * - If the PHY can auto-negotiate first decide what to advertise, then * enable/disable auto-negotiation as desired, and reset. * - If the PHY does not auto-negotiate just reset it. * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC, * otherwise do it later based on the outcome of auto-negotiation. */ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port, struct link_config *lc) { struct fw_port_cmd c; unsigned int fc = 0, mdi = FW_PORT_CAP_MDI_V(FW_PORT_CAP_MDI_AUTO); lc->link_ok = 0; if (lc->requested_fc & PAUSE_RX) fc |= FW_PORT_CAP_FC_RX; if (lc->requested_fc & PAUSE_TX) fc |= FW_PORT_CAP_FC_TX; memset(&c, 0, sizeof(c)); c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) | FW_CMD_REQUEST_F | FW_CMD_EXEC_F | FW_PORT_CMD_PORTID_V(port)); c.action_to_len16 = cpu_to_be32(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_L1_CFG) | FW_LEN16(c)); if (!(lc->supported & FW_PORT_CAP_ANEG)) { c.u.l1cfg.rcap = cpu_to_be32((lc->supported & ADVERT_MASK) | fc); lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); } else if (lc->autoneg == AUTONEG_DISABLE) { c.u.l1cfg.rcap = cpu_to_be32(lc->requested_speed | fc | mdi); lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); } else c.u.l1cfg.rcap = cpu_to_be32(lc->advertising | fc | mdi); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_restart_aneg - restart autonegotiation * @adap: the adapter * @mbox: mbox to use for the FW command * @port: the port id * * Restarts autonegotiation for the selected port. */ int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port) { struct fw_port_cmd c; memset(&c, 0, sizeof(c)); c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) | FW_CMD_REQUEST_F | FW_CMD_EXEC_F | FW_PORT_CMD_PORTID_V(port)); c.action_to_len16 = cpu_to_be32(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_L1_CFG) | FW_LEN16(c)); c.u.l1cfg.rcap = cpu_to_be32(FW_PORT_CAP_ANEG); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } typedef void (*int_handler_t)(struct adapter *adap); struct intr_info { unsigned int mask; /* bits to check in interrupt status */ const char *msg; /* message to print or NULL */ short stat_idx; /* stat counter to increment or -1 */ unsigned short fatal; /* whether the condition reported is fatal */ int_handler_t int_handler; /* platform-specific int handler */ }; /** * t4_handle_intr_status - table driven interrupt handler * @adapter: the adapter that generated the interrupt * @reg: the interrupt status register to process * @acts: table of interrupt actions * * A table driven interrupt handler that applies a set of masks to an * interrupt status word and performs the corresponding actions if the * interrupts described by the mask have occurred. The actions include * optionally emitting a warning or alert message. The table is terminated * by an entry specifying mask 0. Returns the number of fatal interrupt * conditions. */ static int t4_handle_intr_status(struct adapter *adapter, unsigned int reg, const struct intr_info *acts) { int fatal = 0; unsigned int mask = 0; unsigned int status = t4_read_reg(adapter, reg); for ( ; acts->mask; ++acts) { if (!(status & acts->mask)) continue; if (acts->fatal) { fatal++; dev_alert(adapter->pdev_dev, "%s (0x%x)\n", acts->msg, status & acts->mask); } else if (acts->msg && printk_ratelimit()) dev_warn(adapter->pdev_dev, "%s (0x%x)\n", acts->msg, status & acts->mask); if (acts->int_handler) acts->int_handler(adapter); mask |= acts->mask; } status &= mask; if (status) /* clear processed interrupts */ t4_write_reg(adapter, reg, status); return fatal; } /* * Interrupt handler for the PCIE module. */ static void pcie_intr_handler(struct adapter *adapter) { static const struct intr_info sysbus_intr_info[] = { { RNPP_F, "RXNP array parity error", -1, 1 }, { RPCP_F, "RXPC array parity error", -1, 1 }, { RCIP_F, "RXCIF array parity error", -1, 1 }, { RCCP_F, "Rx completions control array parity error", -1, 1 }, { RFTP_F, "RXFT array parity error", -1, 1 }, { 0 } }; static const struct intr_info pcie_port_intr_info[] = { { TPCP_F, "TXPC array parity error", -1, 1 }, { TNPP_F, "TXNP array parity error", -1, 1 }, { TFTP_F, "TXFT array parity error", -1, 1 }, { TCAP_F, "TXCA array parity error", -1, 1 }, { TCIP_F, "TXCIF array parity error", -1, 1 }, { RCAP_F, "RXCA array parity error", -1, 1 }, { OTDD_F, "outbound request TLP discarded", -1, 1 }, { RDPE_F, "Rx data parity error", -1, 1 }, { TDUE_F, "Tx uncorrectable data error", -1, 1 }, { 0 } }; static const struct intr_info pcie_intr_info[] = { { MSIADDRLPERR_F, "MSI AddrL parity error", -1, 1 }, { MSIADDRHPERR_F, "MSI AddrH parity error", -1, 1 }, { MSIDATAPERR_F, "MSI data parity error", -1, 1 }, { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 }, { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 }, { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 }, { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 }, { PIOCPLPERR_F, "PCI PIO completion FIFO parity error", -1, 1 }, { PIOREQPERR_F, "PCI PIO request FIFO parity error", -1, 1 }, { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 }, { CCNTPERR_F, "PCI CMD channel count parity error", -1, 1 }, { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 }, { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 }, { DCNTPERR_F, "PCI DMA channel count parity error", -1, 1 }, { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 }, { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 }, { HCNTPERR_F, "PCI HMA channel count parity error", -1, 1 }, { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 }, { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 }, { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 }, { FIDPERR_F, "PCI FID parity error", -1, 1 }, { INTXCLRPERR_F, "PCI INTx clear parity error", -1, 1 }, { MATAGPERR_F, "PCI MA tag parity error", -1, 1 }, { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 }, { RXCPLPERR_F, "PCI Rx completion parity error", -1, 1 }, { RXWRPERR_F, "PCI Rx write parity error", -1, 1 }, { RPLPERR_F, "PCI replay buffer parity error", -1, 1 }, { PCIESINT_F, "PCI core secondary fault", -1, 1 }, { PCIEPINT_F, "PCI core primary fault", -1, 1 }, { UNXSPLCPLERR_F, "PCI unexpected split completion error", -1, 0 }, { 0 } }; static struct intr_info t5_pcie_intr_info[] = { { MSTGRPPERR_F, "Master Response Read Queue parity error", -1, 1 }, { MSTTIMEOUTPERR_F, "Master Timeout FIFO parity error", -1, 1 }, { MSIXSTIPERR_F, "MSI-X STI SRAM parity error", -1, 1 }, { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 }, { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 }, { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 }, { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 }, { PIOCPLGRPPERR_F, "PCI PIO completion Group FIFO parity error", -1, 1 }, { PIOREQGRPPERR_F, "PCI PIO request Group FIFO parity error", -1, 1 }, { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 }, { MSTTAGQPERR_F, "PCI master tag queue parity error", -1, 1 }, { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 }, { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 }, { DREQWRPERR_F, "PCI DMA channel write request parity error", -1, 1 }, { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 }, { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 }, { HREQWRPERR_F, "PCI HMA channel count parity error", -1, 1 }, { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 }, { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 }, { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 }, { FIDPERR_F, "PCI FID parity error", -1, 1 }, { VFIDPERR_F, "PCI INTx clear parity error", -1, 1 }, { MAGRPPERR_F, "PCI MA group FIFO parity error", -1, 1 }, { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 }, { IPRXHDRGRPPERR_F, "PCI IP Rx header group parity error", -1, 1 }, { IPRXDATAGRPPERR_F, "PCI IP Rx data group parity error", -1, 1 }, { RPLPERR_F, "PCI IP replay buffer parity error", -1, 1 }, { IPSOTPERR_F, "PCI IP SOT buffer parity error", -1, 1 }, { TRGT1GRPPERR_F, "PCI TRGT1 group FIFOs parity error", -1, 1 }, { READRSPERR_F, "Outbound read error", -1, 0 }, { 0 } }; int fat; if (is_t4(adapter->params.chip)) fat = t4_handle_intr_status(adapter, PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS_A, sysbus_intr_info) + t4_handle_intr_status(adapter, PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS_A, pcie_port_intr_info) + t4_handle_intr_status(adapter, PCIE_INT_CAUSE_A, pcie_intr_info); else fat = t4_handle_intr_status(adapter, PCIE_INT_CAUSE_A, t5_pcie_intr_info); if (fat) t4_fatal_err(adapter); } /* * TP interrupt handler. */ static void tp_intr_handler(struct adapter *adapter) { static const struct intr_info tp_intr_info[] = { { 0x3fffffff, "TP parity error", -1, 1 }, { FLMTXFLSTEMPTY_F, "TP out of Tx pages", -1, 1 }, { 0 } }; if (t4_handle_intr_status(adapter, TP_INT_CAUSE_A, tp_intr_info)) t4_fatal_err(adapter); } /* * SGE interrupt handler. */ static void sge_intr_handler(struct adapter *adapter) { u64 v; u32 err; static const struct intr_info sge_intr_info[] = { { ERR_CPL_EXCEED_IQE_SIZE_F, "SGE received CPL exceeding IQE size", -1, 1 }, { ERR_INVALID_CIDX_INC_F, "SGE GTS CIDX increment too large", -1, 0 }, { ERR_CPL_OPCODE_0_F, "SGE received 0-length CPL", -1, 0 }, { DBFIFO_LP_INT_F, NULL, -1, 0, t4_db_full }, { ERR_DATA_CPL_ON_HIGH_QID1_F | ERR_DATA_CPL_ON_HIGH_QID0_F, "SGE IQID > 1023 received CPL for FL", -1, 0 }, { ERR_BAD_DB_PIDX3_F, "SGE DBP 3 pidx increment too large", -1, 0 }, { ERR_BAD_DB_PIDX2_F, "SGE DBP 2 pidx increment too large", -1, 0 }, { ERR_BAD_DB_PIDX1_F, "SGE DBP 1 pidx increment too large", -1, 0 }, { ERR_BAD_DB_PIDX0_F, "SGE DBP 0 pidx increment too large", -1, 0 }, { ERR_ING_CTXT_PRIO_F, "SGE too many priority ingress contexts", -1, 0 }, { INGRESS_SIZE_ERR_F, "SGE illegal ingress QID", -1, 0 }, { EGRESS_SIZE_ERR_F, "SGE illegal egress QID", -1, 0 }, { 0 } }; static struct intr_info t4t5_sge_intr_info[] = { { ERR_DROPPED_DB_F, NULL, -1, 0, t4_db_dropped }, { DBFIFO_HP_INT_F, NULL, -1, 0, t4_db_full }, { ERR_EGR_CTXT_PRIO_F, "SGE too many priority egress contexts", -1, 0 }, { 0 } }; v = (u64)t4_read_reg(adapter, SGE_INT_CAUSE1_A) | ((u64)t4_read_reg(adapter, SGE_INT_CAUSE2_A) << 32); if (v) { dev_alert(adapter->pdev_dev, "SGE parity error (%#llx)\n", (unsigned long long)v); t4_write_reg(adapter, SGE_INT_CAUSE1_A, v); t4_write_reg(adapter, SGE_INT_CAUSE2_A, v >> 32); } v |= t4_handle_intr_status(adapter, SGE_INT_CAUSE3_A, sge_intr_info); if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) v |= t4_handle_intr_status(adapter, SGE_INT_CAUSE3_A, t4t5_sge_intr_info); err = t4_read_reg(adapter, SGE_ERROR_STATS_A); if (err & ERROR_QID_VALID_F) { dev_err(adapter->pdev_dev, "SGE error for queue %u\n", ERROR_QID_G(err)); if (err & UNCAPTURED_ERROR_F) dev_err(adapter->pdev_dev, "SGE UNCAPTURED_ERROR set (clearing)\n"); t4_write_reg(adapter, SGE_ERROR_STATS_A, ERROR_QID_VALID_F | UNCAPTURED_ERROR_F); } if (v != 0) t4_fatal_err(adapter); } #define CIM_OBQ_INTR (OBQULP0PARERR_F | OBQULP1PARERR_F | OBQULP2PARERR_F |\ OBQULP3PARERR_F | OBQSGEPARERR_F | OBQNCSIPARERR_F) #define CIM_IBQ_INTR (IBQTP0PARERR_F | IBQTP1PARERR_F | IBQULPPARERR_F |\ IBQSGEHIPARERR_F | IBQSGELOPARERR_F | IBQNCSIPARERR_F) /* * CIM interrupt handler. */ static void cim_intr_handler(struct adapter *adapter) { static const struct intr_info cim_intr_info[] = { { PREFDROPINT_F, "CIM control register prefetch drop", -1, 1 }, { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 }, { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 }, { MBUPPARERR_F, "CIM mailbox uP parity error", -1, 1 }, { MBHOSTPARERR_F, "CIM mailbox host parity error", -1, 1 }, { TIEQINPARERRINT_F, "CIM TIEQ outgoing parity error", -1, 1 }, { TIEQOUTPARERRINT_F, "CIM TIEQ incoming parity error", -1, 1 }, { 0 } }; static const struct intr_info cim_upintr_info[] = { { RSVDSPACEINT_F, "CIM reserved space access", -1, 1 }, { ILLTRANSINT_F, "CIM illegal transaction", -1, 1 }, { ILLWRINT_F, "CIM illegal write", -1, 1 }, { ILLRDINT_F, "CIM illegal read", -1, 1 }, { ILLRDBEINT_F, "CIM illegal read BE", -1, 1 }, { ILLWRBEINT_F, "CIM illegal write BE", -1, 1 }, { SGLRDBOOTINT_F, "CIM single read from boot space", -1, 1 }, { SGLWRBOOTINT_F, "CIM single write to boot space", -1, 1 }, { BLKWRBOOTINT_F, "CIM block write to boot space", -1, 1 }, { SGLRDFLASHINT_F, "CIM single read from flash space", -1, 1 }, { SGLWRFLASHINT_F, "CIM single write to flash space", -1, 1 }, { BLKWRFLASHINT_F, "CIM block write to flash space", -1, 1 }, { SGLRDEEPROMINT_F, "CIM single EEPROM read", -1, 1 }, { SGLWREEPROMINT_F, "CIM single EEPROM write", -1, 1 }, { BLKRDEEPROMINT_F, "CIM block EEPROM read", -1, 1 }, { BLKWREEPROMINT_F, "CIM block EEPROM write", -1, 1 }, { SGLRDCTLINT_F, "CIM single read from CTL space", -1, 1 }, { SGLWRCTLINT_F, "CIM single write to CTL space", -1, 1 }, { BLKRDCTLINT_F, "CIM block read from CTL space", -1, 1 }, { BLKWRCTLINT_F, "CIM block write to CTL space", -1, 1 }, { SGLRDPLINT_F, "CIM single read from PL space", -1, 1 }, { SGLWRPLINT_F, "CIM single write to PL space", -1, 1 }, { BLKRDPLINT_F, "CIM block read from PL space", -1, 1 }, { BLKWRPLINT_F, "CIM block write to PL space", -1, 1 }, { REQOVRLOOKUPINT_F, "CIM request FIFO overwrite", -1, 1 }, { RSPOVRLOOKUPINT_F, "CIM response FIFO overwrite", -1, 1 }, { TIMEOUTINT_F, "CIM PIF timeout", -1, 1 }, { TIMEOUTMAINT_F, "CIM PIF MA timeout", -1, 1 }, { 0 } }; int fat; if (t4_read_reg(adapter, PCIE_FW_A) & PCIE_FW_ERR_F) t4_report_fw_error(adapter); fat = t4_handle_intr_status(adapter, CIM_HOST_INT_CAUSE_A, cim_intr_info) + t4_handle_intr_status(adapter, CIM_HOST_UPACC_INT_CAUSE_A, cim_upintr_info); if (fat) t4_fatal_err(adapter); } /* * ULP RX interrupt handler. */ static void ulprx_intr_handler(struct adapter *adapter) { static const struct intr_info ulprx_intr_info[] = { { 0x1800000, "ULPRX context error", -1, 1 }, { 0x7fffff, "ULPRX parity error", -1, 1 }, { 0 } }; if (t4_handle_intr_status(adapter, ULP_RX_INT_CAUSE_A, ulprx_intr_info)) t4_fatal_err(adapter); } /* * ULP TX interrupt handler. */ static void ulptx_intr_handler(struct adapter *adapter) { static const struct intr_info ulptx_intr_info[] = { { PBL_BOUND_ERR_CH3_F, "ULPTX channel 3 PBL out of bounds", -1, 0 }, { PBL_BOUND_ERR_CH2_F, "ULPTX channel 2 PBL out of bounds", -1, 0 }, { PBL_BOUND_ERR_CH1_F, "ULPTX channel 1 PBL out of bounds", -1, 0 }, { PBL_BOUND_ERR_CH0_F, "ULPTX channel 0 PBL out of bounds", -1, 0 }, { 0xfffffff, "ULPTX parity error", -1, 1 }, { 0 } }; if (t4_handle_intr_status(adapter, ULP_TX_INT_CAUSE_A, ulptx_intr_info)) t4_fatal_err(adapter); } /* * PM TX interrupt handler. */ static void pmtx_intr_handler(struct adapter *adapter) { static const struct intr_info pmtx_intr_info[] = { { PCMD_LEN_OVFL0_F, "PMTX channel 0 pcmd too large", -1, 1 }, { PCMD_LEN_OVFL1_F, "PMTX channel 1 pcmd too large", -1, 1 }, { PCMD_LEN_OVFL2_F, "PMTX channel 2 pcmd too large", -1, 1 }, { ZERO_C_CMD_ERROR_F, "PMTX 0-length pcmd", -1, 1 }, { PMTX_FRAMING_ERROR_F, "PMTX framing error", -1, 1 }, { OESPI_PAR_ERROR_F, "PMTX oespi parity error", -1, 1 }, { DB_OPTIONS_PAR_ERROR_F, "PMTX db_options parity error", -1, 1 }, { ICSPI_PAR_ERROR_F, "PMTX icspi parity error", -1, 1 }, { PMTX_C_PCMD_PAR_ERROR_F, "PMTX c_pcmd parity error", -1, 1}, { 0 } }; if (t4_handle_intr_status(adapter, PM_TX_INT_CAUSE_A, pmtx_intr_info)) t4_fatal_err(adapter); } /* * PM RX interrupt handler. */ static void pmrx_intr_handler(struct adapter *adapter) { static const struct intr_info pmrx_intr_info[] = { { ZERO_E_CMD_ERROR_F, "PMRX 0-length pcmd", -1, 1 }, { PMRX_FRAMING_ERROR_F, "PMRX framing error", -1, 1 }, { OCSPI_PAR_ERROR_F, "PMRX ocspi parity error", -1, 1 }, { DB_OPTIONS_PAR_ERROR_F, "PMRX db_options parity error", -1, 1 }, { IESPI_PAR_ERROR_F, "PMRX iespi parity error", -1, 1 }, { PMRX_E_PCMD_PAR_ERROR_F, "PMRX e_pcmd parity error", -1, 1}, { 0 } }; if (t4_handle_intr_status(adapter, PM_RX_INT_CAUSE_A, pmrx_intr_info)) t4_fatal_err(adapter); } /* * CPL switch interrupt handler. */ static void cplsw_intr_handler(struct adapter *adapter) { static const struct intr_info cplsw_intr_info[] = { { CIM_OP_MAP_PERR_F, "CPLSW CIM op_map parity error", -1, 1 }, { CIM_OVFL_ERROR_F, "CPLSW CIM overflow", -1, 1 }, { TP_FRAMING_ERROR_F, "CPLSW TP framing error", -1, 1 }, { SGE_FRAMING_ERROR_F, "CPLSW SGE framing error", -1, 1 }, { CIM_FRAMING_ERROR_F, "CPLSW CIM framing error", -1, 1 }, { ZERO_SWITCH_ERROR_F, "CPLSW no-switch error", -1, 1 }, { 0 } }; if (t4_handle_intr_status(adapter, CPL_INTR_CAUSE_A, cplsw_intr_info)) t4_fatal_err(adapter); } /* * LE interrupt handler. */ static void le_intr_handler(struct adapter *adap) { enum chip_type chip = CHELSIO_CHIP_VERSION(adap->params.chip); static const struct intr_info le_intr_info[] = { { LIPMISS_F, "LE LIP miss", -1, 0 }, { LIP0_F, "LE 0 LIP error", -1, 0 }, { PARITYERR_F, "LE parity error", -1, 1 }, { UNKNOWNCMD_F, "LE unknown command", -1, 1 }, { REQQPARERR_F, "LE request queue parity error", -1, 1 }, { 0 } }; static struct intr_info t6_le_intr_info[] = { { T6_LIPMISS_F, "LE LIP miss", -1, 0 }, { T6_LIP0_F, "LE 0 LIP error", -1, 0 }, { TCAMINTPERR_F, "LE parity error", -1, 1 }, { T6_UNKNOWNCMD_F, "LE unknown command", -1, 1 }, { SSRAMINTPERR_F, "LE request queue parity error", -1, 1 }, { 0 } }; if (t4_handle_intr_status(adap, LE_DB_INT_CAUSE_A, (chip <= CHELSIO_T5) ? le_intr_info : t6_le_intr_info)) t4_fatal_err(adap); } /* * MPS interrupt handler. */ static void mps_intr_handler(struct adapter *adapter) { static const struct intr_info mps_rx_intr_info[] = { { 0xffffff, "MPS Rx parity error", -1, 1 }, { 0 } }; static const struct intr_info mps_tx_intr_info[] = { { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 }, { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 }, { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error", -1, 1 }, { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error", -1, 1 }, { BUBBLE_F, "MPS Tx underflow", -1, 1 }, { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 }, { FRMERR_F, "MPS Tx framing error", -1, 1 }, { 0 } }; static const struct intr_info mps_trc_intr_info[] = { { FILTMEM_V(FILTMEM_M), "MPS TRC filter parity error", -1, 1 }, { PKTFIFO_V(PKTFIFO_M), "MPS TRC packet FIFO parity error", -1, 1 }, { MISCPERR_F, "MPS TRC misc parity error", -1, 1 }, { 0 } }; static const struct intr_info mps_stat_sram_intr_info[] = { { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 }, { 0 } }; static const struct intr_info mps_stat_tx_intr_info[] = { { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 }, { 0 } }; static const struct intr_info mps_stat_rx_intr_info[] = { { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 }, { 0 } }; static const struct intr_info mps_cls_intr_info[] = { { MATCHSRAM_F, "MPS match SRAM parity error", -1, 1 }, { MATCHTCAM_F, "MPS match TCAM parity error", -1, 1 }, { HASHSRAM_F, "MPS hash SRAM parity error", -1, 1 }, { 0 } }; int fat; fat = t4_handle_intr_status(adapter, MPS_RX_PERR_INT_CAUSE_A, mps_rx_intr_info) + t4_handle_intr_status(adapter, MPS_TX_INT_CAUSE_A, mps_tx_intr_info) + t4_handle_intr_status(adapter, MPS_TRC_INT_CAUSE_A, mps_trc_intr_info) + t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_SRAM_A, mps_stat_sram_intr_info) + t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_TX_FIFO_A, mps_stat_tx_intr_info) + t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_RX_FIFO_A, mps_stat_rx_intr_info) + t4_handle_intr_status(adapter, MPS_CLS_INT_CAUSE_A, mps_cls_intr_info); t4_write_reg(adapter, MPS_INT_CAUSE_A, 0); t4_read_reg(adapter, MPS_INT_CAUSE_A); /* flush */ if (fat) t4_fatal_err(adapter); } #define MEM_INT_MASK (PERR_INT_CAUSE_F | ECC_CE_INT_CAUSE_F | \ ECC_UE_INT_CAUSE_F) /* * EDC/MC interrupt handler. */ static void mem_intr_handler(struct adapter *adapter, int idx) { static const char name[4][7] = { "EDC0", "EDC1", "MC/MC0", "MC1" }; unsigned int addr, cnt_addr, v; if (idx <= MEM_EDC1) { addr = EDC_REG(EDC_INT_CAUSE_A, idx); cnt_addr = EDC_REG(EDC_ECC_STATUS_A, idx); } else if (idx == MEM_MC) { if (is_t4(adapter->params.chip)) { addr = MC_INT_CAUSE_A; cnt_addr = MC_ECC_STATUS_A; } else { addr = MC_P_INT_CAUSE_A; cnt_addr = MC_P_ECC_STATUS_A; } } else { addr = MC_REG(MC_P_INT_CAUSE_A, 1); cnt_addr = MC_REG(MC_P_ECC_STATUS_A, 1); } v = t4_read_reg(adapter, addr) & MEM_INT_MASK; if (v & PERR_INT_CAUSE_F) dev_alert(adapter->pdev_dev, "%s FIFO parity error\n", name[idx]); if (v & ECC_CE_INT_CAUSE_F) { u32 cnt = ECC_CECNT_G(t4_read_reg(adapter, cnt_addr)); t4_edc_err_read(adapter, idx); t4_write_reg(adapter, cnt_addr, ECC_CECNT_V(ECC_CECNT_M)); if (printk_ratelimit()) dev_warn(adapter->pdev_dev, "%u %s correctable ECC data error%s\n", cnt, name[idx], cnt > 1 ? "s" : ""); } if (v & ECC_UE_INT_CAUSE_F) dev_alert(adapter->pdev_dev, "%s uncorrectable ECC data error\n", name[idx]); t4_write_reg(adapter, addr, v); if (v & (PERR_INT_CAUSE_F | ECC_UE_INT_CAUSE_F)) t4_fatal_err(adapter); } /* * MA interrupt handler. */ static void ma_intr_handler(struct adapter *adap) { u32 v, status = t4_read_reg(adap, MA_INT_CAUSE_A); if (status & MEM_PERR_INT_CAUSE_F) { dev_alert(adap->pdev_dev, "MA parity error, parity status %#x\n", t4_read_reg(adap, MA_PARITY_ERROR_STATUS1_A)); if (is_t5(adap->params.chip)) dev_alert(adap->pdev_dev, "MA parity error, parity status %#x\n", t4_read_reg(adap, MA_PARITY_ERROR_STATUS2_A)); } if (status & MEM_WRAP_INT_CAUSE_F) { v = t4_read_reg(adap, MA_INT_WRAP_STATUS_A); dev_alert(adap->pdev_dev, "MA address wrap-around error by " "client %u to address %#x\n", MEM_WRAP_CLIENT_NUM_G(v), MEM_WRAP_ADDRESS_G(v) << 4); } t4_write_reg(adap, MA_INT_CAUSE_A, status); t4_fatal_err(adap); } /* * SMB interrupt handler. */ static void smb_intr_handler(struct adapter *adap) { static const struct intr_info smb_intr_info[] = { { MSTTXFIFOPARINT_F, "SMB master Tx FIFO parity error", -1, 1 }, { MSTRXFIFOPARINT_F, "SMB master Rx FIFO parity error", -1, 1 }, { SLVFIFOPARINT_F, "SMB slave FIFO parity error", -1, 1 }, { 0 } }; if (t4_handle_intr_status(adap, SMB_INT_CAUSE_A, smb_intr_info)) t4_fatal_err(adap); } /* * NC-SI interrupt handler. */ static void ncsi_intr_handler(struct adapter *adap) { static const struct intr_info ncsi_intr_info[] = { { CIM_DM_PRTY_ERR_F, "NC-SI CIM parity error", -1, 1 }, { MPS_DM_PRTY_ERR_F, "NC-SI MPS parity error", -1, 1 }, { TXFIFO_PRTY_ERR_F, "NC-SI Tx FIFO parity error", -1, 1 }, { RXFIFO_PRTY_ERR_F, "NC-SI Rx FIFO parity error", -1, 1 }, { 0 } }; if (t4_handle_intr_status(adap, NCSI_INT_CAUSE_A, ncsi_intr_info)) t4_fatal_err(adap); } /* * XGMAC interrupt handler. */ static void xgmac_intr_handler(struct adapter *adap, int port) { u32 v, int_cause_reg; if (is_t4(adap->params.chip)) int_cause_reg = PORT_REG(port, XGMAC_PORT_INT_CAUSE_A); else int_cause_reg = T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A); v = t4_read_reg(adap, int_cause_reg); v &= TXFIFO_PRTY_ERR_F | RXFIFO_PRTY_ERR_F; if (!v) return; if (v & TXFIFO_PRTY_ERR_F) dev_alert(adap->pdev_dev, "XGMAC %d Tx FIFO parity error\n", port); if (v & RXFIFO_PRTY_ERR_F) dev_alert(adap->pdev_dev, "XGMAC %d Rx FIFO parity error\n", port); t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_INT_CAUSE_A), v); t4_fatal_err(adap); } /* * PL interrupt handler. */ static void pl_intr_handler(struct adapter *adap) { static const struct intr_info pl_intr_info[] = { { FATALPERR_F, "T4 fatal parity error", -1, 1 }, { PERRVFID_F, "PL VFID_MAP parity error", -1, 1 }, { 0 } }; if (t4_handle_intr_status(adap, PL_PL_INT_CAUSE_A, pl_intr_info)) t4_fatal_err(adap); } #define PF_INTR_MASK (PFSW_F) #define GLBL_INTR_MASK (CIM_F | MPS_F | PL_F | PCIE_F | MC_F | EDC0_F | \ EDC1_F | LE_F | TP_F | MA_F | PM_TX_F | PM_RX_F | ULP_RX_F | \ CPL_SWITCH_F | SGE_F | ULP_TX_F) /** * t4_slow_intr_handler - control path interrupt handler * @adapter: the adapter * * T4 interrupt handler for non-data global interrupt events, e.g., errors. * The designation 'slow' is because it involves register reads, while * data interrupts typically don't involve any MMIOs. */ int t4_slow_intr_handler(struct adapter *adapter) { u32 cause = t4_read_reg(adapter, PL_INT_CAUSE_A); if (!(cause & GLBL_INTR_MASK)) return 0; if (cause & CIM_F) cim_intr_handler(adapter); if (cause & MPS_F) mps_intr_handler(adapter); if (cause & NCSI_F) ncsi_intr_handler(adapter); if (cause & PL_F) pl_intr_handler(adapter); if (cause & SMB_F) smb_intr_handler(adapter); if (cause & XGMAC0_F) xgmac_intr_handler(adapter, 0); if (cause & XGMAC1_F) xgmac_intr_handler(adapter, 1); if (cause & XGMAC_KR0_F) xgmac_intr_handler(adapter, 2); if (cause & XGMAC_KR1_F) xgmac_intr_handler(adapter, 3); if (cause & PCIE_F) pcie_intr_handler(adapter); if (cause & MC_F) mem_intr_handler(adapter, MEM_MC); if (is_t5(adapter->params.chip) && (cause & MC1_F)) mem_intr_handler(adapter, MEM_MC1); if (cause & EDC0_F) mem_intr_handler(adapter, MEM_EDC0); if (cause & EDC1_F) mem_intr_handler(adapter, MEM_EDC1); if (cause & LE_F) le_intr_handler(adapter); if (cause & TP_F) tp_intr_handler(adapter); if (cause & MA_F) ma_intr_handler(adapter); if (cause & PM_TX_F) pmtx_intr_handler(adapter); if (cause & PM_RX_F) pmrx_intr_handler(adapter); if (cause & ULP_RX_F) ulprx_intr_handler(adapter); if (cause & CPL_SWITCH_F) cplsw_intr_handler(adapter); if (cause & SGE_F) sge_intr_handler(adapter); if (cause & ULP_TX_F) ulptx_intr_handler(adapter); /* Clear the interrupts just processed for which we are the master. */ t4_write_reg(adapter, PL_INT_CAUSE_A, cause & GLBL_INTR_MASK); (void)t4_read_reg(adapter, PL_INT_CAUSE_A); /* flush */ return 1; } /** * t4_intr_enable - enable interrupts * @adapter: the adapter whose interrupts should be enabled * * Enable PF-specific interrupts for the calling function and the top-level * interrupt concentrator for global interrupts. Interrupts are already * enabled at each module, here we just enable the roots of the interrupt * hierarchies. * * Note: this function should be called only when the driver manages * non PF-specific interrupts from the various HW modules. Only one PCI * function at a time should be doing this. */ void t4_intr_enable(struct adapter *adapter) { u32 val = 0; u32 whoami = t4_read_reg(adapter, PL_WHOAMI_A); u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ? SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami); if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) val = ERR_DROPPED_DB_F | ERR_EGR_CTXT_PRIO_F | DBFIFO_HP_INT_F; t4_write_reg(adapter, SGE_INT_ENABLE3_A, ERR_CPL_EXCEED_IQE_SIZE_F | ERR_INVALID_CIDX_INC_F | ERR_CPL_OPCODE_0_F | ERR_DATA_CPL_ON_HIGH_QID1_F | INGRESS_SIZE_ERR_F | ERR_DATA_CPL_ON_HIGH_QID0_F | ERR_BAD_DB_PIDX3_F | ERR_BAD_DB_PIDX2_F | ERR_BAD_DB_PIDX1_F | ERR_BAD_DB_PIDX0_F | ERR_ING_CTXT_PRIO_F | DBFIFO_LP_INT_F | EGRESS_SIZE_ERR_F | val); t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE_A), PF_INTR_MASK); t4_set_reg_field(adapter, PL_INT_MAP0_A, 0, 1 << pf); } /** * t4_intr_disable - disable interrupts * @adapter: the adapter whose interrupts should be disabled * * Disable interrupts. We only disable the top-level interrupt * concentrators. The caller must be a PCI function managing global * interrupts. */ void t4_intr_disable(struct adapter *adapter) { u32 whoami = t4_read_reg(adapter, PL_WHOAMI_A); u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ? SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami); t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE_A), 0); t4_set_reg_field(adapter, PL_INT_MAP0_A, 1 << pf, 0); } /** * hash_mac_addr - return the hash value of a MAC address * @addr: the 48-bit Ethernet MAC address * * Hashes a MAC address according to the hash function used by HW inexact * (hash) address matching. */ static int hash_mac_addr(const u8 *addr) { u32 a = ((u32)addr[0] << 16) | ((u32)addr[1] << 8) | addr[2]; u32 b = ((u32)addr[3] << 16) | ((u32)addr[4] << 8) | addr[5]; a ^= b; a ^= (a >> 12); a ^= (a >> 6); return a & 0x3f; } /** * t4_config_rss_range - configure a portion of the RSS mapping table * @adapter: the adapter * @mbox: mbox to use for the FW command * @viid: virtual interface whose RSS subtable is to be written * @start: start entry in the table to write * @n: how many table entries to write * @rspq: values for the response queue lookup table * @nrspq: number of values in @rspq * * Programs the selected part of the VI's RSS mapping table with the * provided values. If @nrspq < @n the supplied values are used repeatedly * until the full table range is populated. * * The caller must ensure the values in @rspq are in the range allowed for * @viid. */ int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid, int start, int n, const u16 *rspq, unsigned int nrspq) { int ret; const u16 *rsp = rspq; const u16 *rsp_end = rspq + nrspq; struct fw_rss_ind_tbl_cmd cmd; memset(&cmd, 0, sizeof(cmd)); cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_IND_TBL_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | FW_RSS_IND_TBL_CMD_VIID_V(viid)); cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); /* each fw_rss_ind_tbl_cmd takes up to 32 entries */ while (n > 0) { int nq = min(n, 32); __be32 *qp = &cmd.iq0_to_iq2; cmd.niqid = cpu_to_be16(nq); cmd.startidx = cpu_to_be16(start); start += nq; n -= nq; while (nq > 0) { unsigned int v; v = FW_RSS_IND_TBL_CMD_IQ0_V(*rsp); if (++rsp >= rsp_end) rsp = rspq; v |= FW_RSS_IND_TBL_CMD_IQ1_V(*rsp); if (++rsp >= rsp_end) rsp = rspq; v |= FW_RSS_IND_TBL_CMD_IQ2_V(*rsp); if (++rsp >= rsp_end) rsp = rspq; *qp++ = cpu_to_be32(v); nq -= 3; } ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL); if (ret) return ret; } return 0; } /** * t4_config_glbl_rss - configure the global RSS mode * @adapter: the adapter * @mbox: mbox to use for the FW command * @mode: global RSS mode * @flags: mode-specific flags * * Sets the global RSS mode. */ int t4_config_glbl_rss(struct adapter *adapter, int mbox, unsigned int mode, unsigned int flags) { struct fw_rss_glb_config_cmd c; memset(&c, 0, sizeof(c)); c.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_RSS_GLB_CONFIG_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F); c.retval_len16 = cpu_to_be32(FW_LEN16(c)); if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) { c.u.manual.mode_pkd = cpu_to_be32(FW_RSS_GLB_CONFIG_CMD_MODE_V(mode)); } else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) { c.u.basicvirtual.mode_pkd = cpu_to_be32(FW_RSS_GLB_CONFIG_CMD_MODE_V(mode)); c.u.basicvirtual.synmapen_to_hashtoeplitz = cpu_to_be32(flags); } else return -EINVAL; return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL); } /** * t4_config_vi_rss - configure per VI RSS settings * @adapter: the adapter * @mbox: mbox to use for the FW command * @viid: the VI id * @flags: RSS flags * @defq: id of the default RSS queue for the VI. * * Configures VI-specific RSS properties. */ int t4_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid, unsigned int flags, unsigned int defq) { struct fw_rss_vi_config_cmd c; memset(&c, 0, sizeof(c)); c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | FW_RSS_VI_CONFIG_CMD_VIID_V(viid)); c.retval_len16 = cpu_to_be32(FW_LEN16(c)); c.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(flags | FW_RSS_VI_CONFIG_CMD_DEFAULTQ_V(defq)); return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL); } /* Read an RSS table row */ static int rd_rss_row(struct adapter *adap, int row, u32 *val) { t4_write_reg(adap, TP_RSS_LKP_TABLE_A, 0xfff00000 | row); return t4_wait_op_done_val(adap, TP_RSS_LKP_TABLE_A, LKPTBLROWVLD_F, 1, 5, 0, val); } /** * t4_read_rss - read the contents of the RSS mapping table * @adapter: the adapter * @map: holds the contents of the RSS mapping table * * Reads the contents of the RSS hash->queue mapping table. */ int t4_read_rss(struct adapter *adapter, u16 *map) { u32 val; int i, ret; for (i = 0; i < RSS_NENTRIES / 2; ++i) { ret = rd_rss_row(adapter, i, &val); if (ret) return ret; *map++ = LKPTBLQUEUE0_G(val); *map++ = LKPTBLQUEUE1_G(val); } return 0; } static unsigned int t4_use_ldst(struct adapter *adap) { return (adap->flags & FW_OK) || !adap->use_bd; } /** * t4_fw_tp_pio_rw - Access TP PIO through LDST * @adap: the adapter * @vals: where the indirect register values are stored/written * @nregs: how many indirect registers to read/write * @start_idx: index of first indirect register to read/write * @rw: Read (1) or Write (0) * * Access TP PIO registers through LDST */ static void t4_fw_tp_pio_rw(struct adapter *adap, u32 *vals, unsigned int nregs, unsigned int start_index, unsigned int rw) { int ret, i; int cmd = FW_LDST_ADDRSPC_TP_PIO; struct fw_ldst_cmd c; for (i = 0 ; i < nregs; i++) { memset(&c, 0, sizeof(c)); c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) | FW_CMD_REQUEST_F | (rw ? FW_CMD_READ_F : FW_CMD_WRITE_F) | FW_LDST_CMD_ADDRSPACE_V(cmd)); c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); c.u.addrval.addr = cpu_to_be32(start_index + i); c.u.addrval.val = rw ? 0 : cpu_to_be32(vals[i]); ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c); if (!ret && rw) vals[i] = be32_to_cpu(c.u.addrval.val); } } /** * t4_read_rss_key - read the global RSS key * @adap: the adapter * @key: 10-entry array holding the 320-bit RSS key * * Reads the global 320-bit RSS key. */ void t4_read_rss_key(struct adapter *adap, u32 *key) { if (t4_use_ldst(adap)) t4_fw_tp_pio_rw(adap, key, 10, TP_RSS_SECRET_KEY0_A, 1); else t4_read_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, key, 10, TP_RSS_SECRET_KEY0_A); } /** * t4_write_rss_key - program one of the RSS keys * @adap: the adapter * @key: 10-entry array holding the 320-bit RSS key * @idx: which RSS key to write * * Writes one of the RSS keys with the given 320-bit value. If @idx is * 0..15 the corresponding entry in the RSS key table is written, * otherwise the global RSS key is written. */ void t4_write_rss_key(struct adapter *adap, const u32 *key, int idx) { u8 rss_key_addr_cnt = 16; u32 vrt = t4_read_reg(adap, TP_RSS_CONFIG_VRT_A); /* T6 and later: for KeyMode 3 (per-vf and per-vf scramble), * allows access to key addresses 16-63 by using KeyWrAddrX * as index[5:4](upper 2) into key table */ if ((CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) && (vrt & KEYEXTEND_F) && (KEYMODE_G(vrt) == 3)) rss_key_addr_cnt = 32; if (t4_use_ldst(adap)) t4_fw_tp_pio_rw(adap, (void *)key, 10, TP_RSS_SECRET_KEY0_A, 0); else t4_write_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, key, 10, TP_RSS_SECRET_KEY0_A); if (idx >= 0 && idx < rss_key_addr_cnt) { if (rss_key_addr_cnt > 16) t4_write_reg(adap, TP_RSS_CONFIG_VRT_A, KEYWRADDRX_V(idx >> 4) | T6_VFWRADDR_V(idx) | KEYWREN_F); else t4_write_reg(adap, TP_RSS_CONFIG_VRT_A, KEYWRADDR_V(idx) | KEYWREN_F); } } /** * t4_read_rss_pf_config - read PF RSS Configuration Table * @adapter: the adapter * @index: the entry in the PF RSS table to read * @valp: where to store the returned value * * Reads the PF RSS Configuration Table at the specified index and returns * the value found there. */ void t4_read_rss_pf_config(struct adapter *adapter, unsigned int index, u32 *valp) { if (t4_use_ldst(adapter)) t4_fw_tp_pio_rw(adapter, valp, 1, TP_RSS_PF0_CONFIG_A + index, 1); else t4_read_indirect(adapter, TP_PIO_ADDR_A, TP_PIO_DATA_A, valp, 1, TP_RSS_PF0_CONFIG_A + index); } /** * t4_read_rss_vf_config - read VF RSS Configuration Table * @adapter: the adapter * @index: the entry in the VF RSS table to read * @vfl: where to store the returned VFL * @vfh: where to store the returned VFH * * Reads the VF RSS Configuration Table at the specified index and returns * the (VFL, VFH) values found there. */ void t4_read_rss_vf_config(struct adapter *adapter, unsigned int index, u32 *vfl, u32 *vfh) { u32 vrt, mask, data; if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) { mask = VFWRADDR_V(VFWRADDR_M); data = VFWRADDR_V(index); } else { mask = T6_VFWRADDR_V(T6_VFWRADDR_M); data = T6_VFWRADDR_V(index); } /* Request that the index'th VF Table values be read into VFL/VFH. */ vrt = t4_read_reg(adapter, TP_RSS_CONFIG_VRT_A); vrt &= ~(VFRDRG_F | VFWREN_F | KEYWREN_F | mask); vrt |= data | VFRDEN_F; t4_write_reg(adapter, TP_RSS_CONFIG_VRT_A, vrt); /* Grab the VFL/VFH values ... */ if (t4_use_ldst(adapter)) { t4_fw_tp_pio_rw(adapter, vfl, 1, TP_RSS_VFL_CONFIG_A, 1); t4_fw_tp_pio_rw(adapter, vfh, 1, TP_RSS_VFH_CONFIG_A, 1); } else { t4_read_indirect(adapter, TP_PIO_ADDR_A, TP_PIO_DATA_A, vfl, 1, TP_RSS_VFL_CONFIG_A); t4_read_indirect(adapter, TP_PIO_ADDR_A, TP_PIO_DATA_A, vfh, 1, TP_RSS_VFH_CONFIG_A); } } /** * t4_read_rss_pf_map - read PF RSS Map * @adapter: the adapter * * Reads the PF RSS Map register and returns its value. */ u32 t4_read_rss_pf_map(struct adapter *adapter) { u32 pfmap; if (t4_use_ldst(adapter)) t4_fw_tp_pio_rw(adapter, &pfmap, 1, TP_RSS_PF_MAP_A, 1); else t4_read_indirect(adapter, TP_PIO_ADDR_A, TP_PIO_DATA_A, &pfmap, 1, TP_RSS_PF_MAP_A); return pfmap; } /** * t4_read_rss_pf_mask - read PF RSS Mask * @adapter: the adapter * * Reads the PF RSS Mask register and returns its value. */ u32 t4_read_rss_pf_mask(struct adapter *adapter) { u32 pfmask; if (t4_use_ldst(adapter)) t4_fw_tp_pio_rw(adapter, &pfmask, 1, TP_RSS_PF_MSK_A, 1); else t4_read_indirect(adapter, TP_PIO_ADDR_A, TP_PIO_DATA_A, &pfmask, 1, TP_RSS_PF_MSK_A); return pfmask; } /** * t4_tp_get_tcp_stats - read TP's TCP MIB counters * @adap: the adapter * @v4: holds the TCP/IP counter values * @v6: holds the TCP/IPv6 counter values * * Returns the values of TP's TCP/IP and TCP/IPv6 MIB counters. * Either @v4 or @v6 may be %NULL to skip the corresponding stats. */ void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4, struct tp_tcp_stats *v6) { u32 val[TP_MIB_TCP_RXT_SEG_LO_A - TP_MIB_TCP_OUT_RST_A + 1]; #define STAT_IDX(x) ((TP_MIB_TCP_##x##_A) - TP_MIB_TCP_OUT_RST_A) #define STAT(x) val[STAT_IDX(x)] #define STAT64(x) (((u64)STAT(x##_HI) << 32) | STAT(x##_LO)) if (v4) { t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, val, ARRAY_SIZE(val), TP_MIB_TCP_OUT_RST_A); v4->tcp_out_rsts = STAT(OUT_RST); v4->tcp_in_segs = STAT64(IN_SEG); v4->tcp_out_segs = STAT64(OUT_SEG); v4->tcp_retrans_segs = STAT64(RXT_SEG); } if (v6) { t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, val, ARRAY_SIZE(val), TP_MIB_TCP_V6OUT_RST_A); v6->tcp_out_rsts = STAT(OUT_RST); v6->tcp_in_segs = STAT64(IN_SEG); v6->tcp_out_segs = STAT64(OUT_SEG); v6->tcp_retrans_segs = STAT64(RXT_SEG); } #undef STAT64 #undef STAT #undef STAT_IDX } /** * t4_tp_get_err_stats - read TP's error MIB counters * @adap: the adapter * @st: holds the counter values * * Returns the values of TP's error counters. */ void t4_tp_get_err_stats(struct adapter *adap, struct tp_err_stats *st) { int nchan = adap->params.arch.nchan; t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, st->mac_in_errs, nchan, TP_MIB_MAC_IN_ERR_0_A); t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, st->hdr_in_errs, nchan, TP_MIB_HDR_IN_ERR_0_A); t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, st->tcp_in_errs, nchan, TP_MIB_TCP_IN_ERR_0_A); t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, st->tnl_cong_drops, nchan, TP_MIB_TNL_CNG_DROP_0_A); t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, st->ofld_chan_drops, nchan, TP_MIB_OFD_CHN_DROP_0_A); t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, st->tnl_tx_drops, nchan, TP_MIB_TNL_DROP_0_A); t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, st->ofld_vlan_drops, nchan, TP_MIB_OFD_VLN_DROP_0_A); t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, st->tcp6_in_errs, nchan, TP_MIB_TCP_V6IN_ERR_0_A); t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, &st->ofld_no_neigh, 2, TP_MIB_OFD_ARP_DROP_A); } /** * t4_tp_get_cpl_stats - read TP's CPL MIB counters * @adap: the adapter * @st: holds the counter values * * Returns the values of TP's CPL counters. */ void t4_tp_get_cpl_stats(struct adapter *adap, struct tp_cpl_stats *st) { int nchan = adap->params.arch.nchan; t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, st->req, nchan, TP_MIB_CPL_IN_REQ_0_A); t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, st->rsp, nchan, TP_MIB_CPL_OUT_RSP_0_A); } /** * t4_tp_get_rdma_stats - read TP's RDMA MIB counters * @adap: the adapter * @st: holds the counter values * * Returns the values of TP's RDMA counters. */ void t4_tp_get_rdma_stats(struct adapter *adap, struct tp_rdma_stats *st) { t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, &st->rqe_dfr_pkt, 2, TP_MIB_RQE_DFR_PKT_A); } /** * t4_get_fcoe_stats - read TP's FCoE MIB counters for a port * @adap: the adapter * @idx: the port index * @st: holds the counter values * * Returns the values of TP's FCoE counters for the selected port. */ void t4_get_fcoe_stats(struct adapter *adap, unsigned int idx, struct tp_fcoe_stats *st) { u32 val[2]; t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, &st->frames_ddp, 1, TP_MIB_FCOE_DDP_0_A + idx); t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, &st->frames_drop, 1, TP_MIB_FCOE_DROP_0_A + idx); t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, val, 2, TP_MIB_FCOE_BYTE_0_HI_A + 2 * idx); st->octets_ddp = ((u64)val[0] << 32) | val[1]; } /** * t4_get_usm_stats - read TP's non-TCP DDP MIB counters * @adap: the adapter * @st: holds the counter values * * Returns the values of TP's counters for non-TCP directly-placed packets. */ void t4_get_usm_stats(struct adapter *adap, struct tp_usm_stats *st) { u32 val[4]; t4_read_indirect(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, val, 4, TP_MIB_USM_PKTS_A); st->frames = val[0]; st->drops = val[1]; st->octets = ((u64)val[2] << 32) | val[3]; } /** * t4_read_mtu_tbl - returns the values in the HW path MTU table * @adap: the adapter * @mtus: where to store the MTU values * @mtu_log: where to store the MTU base-2 log (may be %NULL) * * Reads the HW path MTU table. */ void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log) { u32 v; int i; for (i = 0; i < NMTUS; ++i) { t4_write_reg(adap, TP_MTU_TABLE_A, MTUINDEX_V(0xff) | MTUVALUE_V(i)); v = t4_read_reg(adap, TP_MTU_TABLE_A); mtus[i] = MTUVALUE_G(v); if (mtu_log) mtu_log[i] = MTUWIDTH_G(v); } } /** * t4_read_cong_tbl - reads the congestion control table * @adap: the adapter * @incr: where to store the alpha values * * Reads the additive increments programmed into the HW congestion * control table. */ void t4_read_cong_tbl(struct adapter *adap, u16 incr[NMTUS][NCCTRL_WIN]) { unsigned int mtu, w; for (mtu = 0; mtu < NMTUS; ++mtu) for (w = 0; w < NCCTRL_WIN; ++w) { t4_write_reg(adap, TP_CCTRL_TABLE_A, ROWINDEX_V(0xffff) | (mtu << 5) | w); incr[mtu][w] = (u16)t4_read_reg(adap, TP_CCTRL_TABLE_A) & 0x1fff; } } /** * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register * @adap: the adapter * @addr: the indirect TP register address * @mask: specifies the field within the register to modify * @val: new value for the field * * Sets a field of an indirect TP register to the given value. */ void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr, unsigned int mask, unsigned int val) { t4_write_reg(adap, TP_PIO_ADDR_A, addr); val |= t4_read_reg(adap, TP_PIO_DATA_A) & ~mask; t4_write_reg(adap, TP_PIO_DATA_A, val); } /** * init_cong_ctrl - initialize congestion control parameters * @a: the alpha values for congestion control * @b: the beta values for congestion control * * Initialize the congestion control parameters. */ static void init_cong_ctrl(unsigned short *a, unsigned short *b) { a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1; a[9] = 2; a[10] = 3; a[11] = 4; a[12] = 5; a[13] = 6; a[14] = 7; a[15] = 8; a[16] = 9; a[17] = 10; a[18] = 14; a[19] = 17; a[20] = 21; a[21] = 25; a[22] = 30; a[23] = 35; a[24] = 45; a[25] = 60; a[26] = 80; a[27] = 100; a[28] = 200; a[29] = 300; a[30] = 400; a[31] = 500; b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0; b[9] = b[10] = 1; b[11] = b[12] = 2; b[13] = b[14] = b[15] = b[16] = 3; b[17] = b[18] = b[19] = b[20] = b[21] = 4; b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5; b[28] = b[29] = 6; b[30] = b[31] = 7; } /* The minimum additive increment value for the congestion control table */ #define CC_MIN_INCR 2U /** * t4_load_mtus - write the MTU and congestion control HW tables * @adap: the adapter * @mtus: the values for the MTU table * @alpha: the values for the congestion control alpha parameter * @beta: the values for the congestion control beta parameter * * Write the HW MTU table with the supplied MTUs and the high-speed * congestion control table with the supplied alpha, beta, and MTUs. * We write the two tables together because the additive increments * depend on the MTUs. */ void t4_load_mtus(struct adapter *adap, const unsigned short *mtus, const unsigned short *alpha, const unsigned short *beta) { static const unsigned int avg_pkts[NCCTRL_WIN] = { 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640, 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480, 28672, 40960, 57344, 81920, 114688, 163840, 229376 }; unsigned int i, w; for (i = 0; i < NMTUS; ++i) { unsigned int mtu = mtus[i]; unsigned int log2 = fls(mtu); if (!(mtu & ((1 << log2) >> 2))) /* round */ log2--; t4_write_reg(adap, TP_MTU_TABLE_A, MTUINDEX_V(i) | MTUWIDTH_V(log2) | MTUVALUE_V(mtu)); for (w = 0; w < NCCTRL_WIN; ++w) { unsigned int inc; inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w], CC_MIN_INCR); t4_write_reg(adap, TP_CCTRL_TABLE_A, (i << 21) | (w << 16) | (beta[w] << 13) | inc); } } } /* Calculates a rate in bytes/s given the number of 256-byte units per 4K core * clocks. The formula is * * bytes/s = bytes256 * 256 * ClkFreq / 4096 * * which is equivalent to * * bytes/s = 62.5 * bytes256 * ClkFreq_ms */ static u64 chan_rate(struct adapter *adap, unsigned int bytes256) { u64 v = bytes256 * adap->params.vpd.cclk; return v * 62 + v / 2; } /** * t4_get_chan_txrate - get the current per channel Tx rates * @adap: the adapter * @nic_rate: rates for NIC traffic * @ofld_rate: rates for offloaded traffic * * Return the current Tx rates in bytes/s for NIC and offloaded traffic * for each channel. */ void t4_get_chan_txrate(struct adapter *adap, u64 *nic_rate, u64 *ofld_rate) { u32 v; v = t4_read_reg(adap, TP_TX_TRATE_A); nic_rate[0] = chan_rate(adap, TNLRATE0_G(v)); nic_rate[1] = chan_rate(adap, TNLRATE1_G(v)); if (adap->params.arch.nchan == NCHAN) { nic_rate[2] = chan_rate(adap, TNLRATE2_G(v)); nic_rate[3] = chan_rate(adap, TNLRATE3_G(v)); } v = t4_read_reg(adap, TP_TX_ORATE_A); ofld_rate[0] = chan_rate(adap, OFDRATE0_G(v)); ofld_rate[1] = chan_rate(adap, OFDRATE1_G(v)); if (adap->params.arch.nchan == NCHAN) { ofld_rate[2] = chan_rate(adap, OFDRATE2_G(v)); ofld_rate[3] = chan_rate(adap, OFDRATE3_G(v)); } } /** * t4_set_trace_filter - configure one of the tracing filters * @adap: the adapter * @tp: the desired trace filter parameters * @idx: which filter to configure * @enable: whether to enable or disable the filter * * Configures one of the tracing filters available in HW. If @enable is * %0 @tp is not examined and may be %NULL. The user is responsible to * set the single/multiple trace mode by writing to MPS_TRC_CFG_A register */ int t4_set_trace_filter(struct adapter *adap, const struct trace_params *tp, int idx, int enable) { int i, ofst = idx * 4; u32 data_reg, mask_reg, cfg; u32 multitrc = TRCMULTIFILTER_F; if (!enable) { t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst, 0); return 0; } cfg = t4_read_reg(adap, MPS_TRC_CFG_A); if (cfg & TRCMULTIFILTER_F) { /* If multiple tracers are enabled, then maximum * capture size is 2.5KB (FIFO size of a single channel) * minus 2 flits for CPL_TRACE_PKT header. */ if (tp->snap_len > ((10 * 1024 / 4) - (2 * 8))) return -EINVAL; } else { /* If multiple tracers are disabled, to avoid deadlocks * maximum packet capture size of 9600 bytes is recommended. * Also in this mode, only trace0 can be enabled and running. */ multitrc = 0; if (tp->snap_len > 9600 || idx) return -EINVAL; } if (tp->port > (is_t4(adap->params.chip) ? 11 : 19) || tp->invert > 1 || tp->skip_len > TFLENGTH_M || tp->skip_ofst > TFOFFSET_M || tp->min_len > TFMINPKTSIZE_M) return -EINVAL; /* stop the tracer we'll be changing */ t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst, 0); idx *= (MPS_TRC_FILTER1_MATCH_A - MPS_TRC_FILTER0_MATCH_A); data_reg = MPS_TRC_FILTER0_MATCH_A + idx; mask_reg = MPS_TRC_FILTER0_DONT_CARE_A + idx; for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) { t4_write_reg(adap, data_reg, tp->data[i]); t4_write_reg(adap, mask_reg, ~tp->mask[i]); } t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_B_A + ofst, TFCAPTUREMAX_V(tp->snap_len) | TFMINPKTSIZE_V(tp->min_len)); t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst, TFOFFSET_V(tp->skip_ofst) | TFLENGTH_V(tp->skip_len) | (is_t4(adap->params.chip) ? TFPORT_V(tp->port) | TFEN_F | TFINVERTMATCH_V(tp->invert) : T5_TFPORT_V(tp->port) | T5_TFEN_F | T5_TFINVERTMATCH_V(tp->invert))); return 0; } /** * t4_get_trace_filter - query one of the tracing filters * @adap: the adapter * @tp: the current trace filter parameters * @idx: which trace filter to query * @enabled: non-zero if the filter is enabled * * Returns the current settings of one of the HW tracing filters. */ void t4_get_trace_filter(struct adapter *adap, struct trace_params *tp, int idx, int *enabled) { u32 ctla, ctlb; int i, ofst = idx * 4; u32 data_reg, mask_reg; ctla = t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst); ctlb = t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_B_A + ofst); if (is_t4(adap->params.chip)) { *enabled = !!(ctla & TFEN_F); tp->port = TFPORT_G(ctla); tp->invert = !!(ctla & TFINVERTMATCH_F); } else { *enabled = !!(ctla & T5_TFEN_F); tp->port = T5_TFPORT_G(ctla); tp->invert = !!(ctla & T5_TFINVERTMATCH_F); } tp->snap_len = TFCAPTUREMAX_G(ctlb); tp->min_len = TFMINPKTSIZE_G(ctlb); tp->skip_ofst = TFOFFSET_G(ctla); tp->skip_len = TFLENGTH_G(ctla); ofst = (MPS_TRC_FILTER1_MATCH_A - MPS_TRC_FILTER0_MATCH_A) * idx; data_reg = MPS_TRC_FILTER0_MATCH_A + ofst; mask_reg = MPS_TRC_FILTER0_DONT_CARE_A + ofst; for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) { tp->mask[i] = ~t4_read_reg(adap, mask_reg); tp->data[i] = t4_read_reg(adap, data_reg) & tp->mask[i]; } } /** * t4_pmtx_get_stats - returns the HW stats from PMTX * @adap: the adapter * @cnt: where to store the count statistics * @cycles: where to store the cycle statistics * * Returns performance statistics from PMTX. */ void t4_pmtx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[]) { int i; u32 data[2]; for (i = 0; i < PM_NSTATS; i++) { t4_write_reg(adap, PM_TX_STAT_CONFIG_A, i + 1); cnt[i] = t4_read_reg(adap, PM_TX_STAT_COUNT_A); if (is_t4(adap->params.chip)) { cycles[i] = t4_read_reg64(adap, PM_TX_STAT_LSB_A); } else { t4_read_indirect(adap, PM_TX_DBG_CTRL_A, PM_TX_DBG_DATA_A, data, 2, PM_TX_DBG_STAT_MSB_A); cycles[i] = (((u64)data[0] << 32) | data[1]); } } } /** * t4_pmrx_get_stats - returns the HW stats from PMRX * @adap: the adapter * @cnt: where to store the count statistics * @cycles: where to store the cycle statistics * * Returns performance statistics from PMRX. */ void t4_pmrx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[]) { int i; u32 data[2]; for (i = 0; i < PM_NSTATS; i++) { t4_write_reg(adap, PM_RX_STAT_CONFIG_A, i + 1); cnt[i] = t4_read_reg(adap, PM_RX_STAT_COUNT_A); if (is_t4(adap->params.chip)) { cycles[i] = t4_read_reg64(adap, PM_RX_STAT_LSB_A); } else { t4_read_indirect(adap, PM_RX_DBG_CTRL_A, PM_RX_DBG_DATA_A, data, 2, PM_RX_DBG_STAT_MSB_A); cycles[i] = (((u64)data[0] << 32) | data[1]); } } } /** * t4_get_mps_bg_map - return the buffer groups associated with a port * @adap: the adapter * @idx: the port index * * Returns a bitmap indicating which MPS buffer groups are associated * with the given port. Bit i is set if buffer group i is used by the * port. */ unsigned int t4_get_mps_bg_map(struct adapter *adap, int idx) { u32 n = NUMPORTS_G(t4_read_reg(adap, MPS_CMN_CTL_A)); if (n == 0) return idx == 0 ? 0xf : 0; if (n == 1) return idx < 2 ? (3 << (2 * idx)) : 0; return 1 << idx; } /** * t4_get_port_type_description - return Port Type string description * @port_type: firmware Port Type enumeration */ const char *t4_get_port_type_description(enum fw_port_type port_type) { static const char *const port_type_description[] = { "R XFI", "R XAUI", "T SGMII", "T XFI", "T XAUI", "KX4", "CX4", "KX", "KR", "R SFP+", "KR/KX", "KR/KX/KX4", "R QSFP_10G", "R QSA", "R QSFP", "R BP40_BA", }; if (port_type < ARRAY_SIZE(port_type_description)) return port_type_description[port_type]; return "UNKNOWN"; } /** * t4_get_port_stats_offset - collect port stats relative to a previous * snapshot * @adap: The adapter * @idx: The port * @stats: Current stats to fill * @offset: Previous stats snapshot */ void t4_get_port_stats_offset(struct adapter *adap, int idx, struct port_stats *stats, struct port_stats *offset) { u64 *s, *o; int i; t4_get_port_stats(adap, idx, stats); for (i = 0, s = (u64 *)stats, o = (u64 *)offset; i < (sizeof(struct port_stats) / sizeof(u64)); i++, s++, o++) *s -= *o; } /** * t4_get_port_stats - collect port statistics * @adap: the adapter * @idx: the port index * @p: the stats structure to fill * * Collect statistics related to the given port from HW. */ void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p) { u32 bgmap = t4_get_mps_bg_map(adap, idx); #define GET_STAT(name) \ t4_read_reg64(adap, \ (is_t4(adap->params.chip) ? PORT_REG(idx, MPS_PORT_STAT_##name##_L) : \ T5_PORT_REG(idx, MPS_PORT_STAT_##name##_L))) #define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L) p->tx_octets = GET_STAT(TX_PORT_BYTES); p->tx_frames = GET_STAT(TX_PORT_FRAMES); p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST); p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST); p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST); p->tx_error_frames = GET_STAT(TX_PORT_ERROR); p->tx_frames_64 = GET_STAT(TX_PORT_64B); p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B); p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B); p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B); p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B); p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B); p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX); p->tx_drop = GET_STAT(TX_PORT_DROP); p->tx_pause = GET_STAT(TX_PORT_PAUSE); p->tx_ppp0 = GET_STAT(TX_PORT_PPP0); p->tx_ppp1 = GET_STAT(TX_PORT_PPP1); p->tx_ppp2 = GET_STAT(TX_PORT_PPP2); p->tx_ppp3 = GET_STAT(TX_PORT_PPP3); p->tx_ppp4 = GET_STAT(TX_PORT_PPP4); p->tx_ppp5 = GET_STAT(TX_PORT_PPP5); p->tx_ppp6 = GET_STAT(TX_PORT_PPP6); p->tx_ppp7 = GET_STAT(TX_PORT_PPP7); p->rx_octets = GET_STAT(RX_PORT_BYTES); p->rx_frames = GET_STAT(RX_PORT_FRAMES); p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST); p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST); p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST); p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR); p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR); p->rx_fcs_err = GET_STAT(RX_PORT_CRC_ERROR); p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR); p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR); p->rx_runt = GET_STAT(RX_PORT_LESS_64B); p->rx_frames_64 = GET_STAT(RX_PORT_64B); p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B); p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B); p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B); p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B); p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B); p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX); p->rx_pause = GET_STAT(RX_PORT_PAUSE); p->rx_ppp0 = GET_STAT(RX_PORT_PPP0); p->rx_ppp1 = GET_STAT(RX_PORT_PPP1); p->rx_ppp2 = GET_STAT(RX_PORT_PPP2); p->rx_ppp3 = GET_STAT(RX_PORT_PPP3); p->rx_ppp4 = GET_STAT(RX_PORT_PPP4); p->rx_ppp5 = GET_STAT(RX_PORT_PPP5); p->rx_ppp6 = GET_STAT(RX_PORT_PPP6); p->rx_ppp7 = GET_STAT(RX_PORT_PPP7); p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0; p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0; p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0; p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0; p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0; p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0; p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0; p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0; #undef GET_STAT #undef GET_STAT_COM } /** * t4_get_lb_stats - collect loopback port statistics * @adap: the adapter * @idx: the loopback port index * @p: the stats structure to fill * * Return HW statistics for the given loopback port. */ void t4_get_lb_stats(struct adapter *adap, int idx, struct lb_port_stats *p) { u32 bgmap = t4_get_mps_bg_map(adap, idx); #define GET_STAT(name) \ t4_read_reg64(adap, \ (is_t4(adap->params.chip) ? \ PORT_REG(idx, MPS_PORT_STAT_LB_PORT_##name##_L) : \ T5_PORT_REG(idx, MPS_PORT_STAT_LB_PORT_##name##_L))) #define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L) p->octets = GET_STAT(BYTES); p->frames = GET_STAT(FRAMES); p->bcast_frames = GET_STAT(BCAST); p->mcast_frames = GET_STAT(MCAST); p->ucast_frames = GET_STAT(UCAST); p->error_frames = GET_STAT(ERROR); p->frames_64 = GET_STAT(64B); p->frames_65_127 = GET_STAT(65B_127B); p->frames_128_255 = GET_STAT(128B_255B); p->frames_256_511 = GET_STAT(256B_511B); p->frames_512_1023 = GET_STAT(512B_1023B); p->frames_1024_1518 = GET_STAT(1024B_1518B); p->frames_1519_max = GET_STAT(1519B_MAX); p->drop = GET_STAT(DROP_FRAMES); p->ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_DROP_FRAME) : 0; p->ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_DROP_FRAME) : 0; p->ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_DROP_FRAME) : 0; p->ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_DROP_FRAME) : 0; p->trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_TRUNC_FRAME) : 0; p->trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_TRUNC_FRAME) : 0; p->trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_TRUNC_FRAME) : 0; p->trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_TRUNC_FRAME) : 0; #undef GET_STAT #undef GET_STAT_COM } /* t4_mk_filtdelwr - create a delete filter WR * @ftid: the filter ID * @wr: the filter work request to populate * @qid: ingress queue to receive the delete notification * * Creates a filter work request to delete the supplied filter. If @qid is * negative the delete notification is suppressed. */ void t4_mk_filtdelwr(unsigned int ftid, struct fw_filter_wr *wr, int qid) { memset(wr, 0, sizeof(*wr)); wr->op_pkd = cpu_to_be32(FW_WR_OP_V(FW_FILTER_WR)); wr->len16_pkd = cpu_to_be32(FW_WR_LEN16_V(sizeof(*wr) / 16)); wr->tid_to_iq = cpu_to_be32(FW_FILTER_WR_TID_V(ftid) | FW_FILTER_WR_NOREPLY_V(qid < 0)); wr->del_filter_to_l2tix = cpu_to_be32(FW_FILTER_WR_DEL_FILTER_F); if (qid >= 0) wr->rx_chan_rx_rpl_iq = cpu_to_be16(FW_FILTER_WR_RX_RPL_IQ_V(qid)); } #define INIT_CMD(var, cmd, rd_wr) do { \ (var).op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_##cmd##_CMD) | \ FW_CMD_REQUEST_F | \ FW_CMD_##rd_wr##_F); \ (var).retval_len16 = cpu_to_be32(FW_LEN16(var)); \ } while (0) int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox, u32 addr, u32 val) { u32 ldst_addrspace; struct fw_ldst_cmd c; memset(&c, 0, sizeof(c)); ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FIRMWARE); c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | ldst_addrspace); c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); c.u.addrval.addr = cpu_to_be32(addr); c.u.addrval.val = cpu_to_be32(val); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_mdio_rd - read a PHY register through MDIO * @adap: the adapter * @mbox: mailbox to use for the FW command * @phy_addr: the PHY address * @mmd: the PHY MMD to access (0 for clause 22 PHYs) * @reg: the register to read * @valp: where to store the value * * Issues a FW command through the given mailbox to read a PHY register. */ int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, unsigned int mmd, unsigned int reg, u16 *valp) { int ret; u32 ldst_addrspace; struct fw_ldst_cmd c; memset(&c, 0, sizeof(c)); ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_MDIO); c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) | FW_CMD_REQUEST_F | FW_CMD_READ_F | ldst_addrspace); c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); c.u.mdio.paddr_mmd = cpu_to_be16(FW_LDST_CMD_PADDR_V(phy_addr) | FW_LDST_CMD_MMD_V(mmd)); c.u.mdio.raddr = cpu_to_be16(reg); ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); if (ret == 0) *valp = be16_to_cpu(c.u.mdio.rval); return ret; } /** * t4_mdio_wr - write a PHY register through MDIO * @adap: the adapter * @mbox: mailbox to use for the FW command * @phy_addr: the PHY address * @mmd: the PHY MMD to access (0 for clause 22 PHYs) * @reg: the register to write * @valp: value to write * * Issues a FW command through the given mailbox to write a PHY register. */ int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, unsigned int mmd, unsigned int reg, u16 val) { u32 ldst_addrspace; struct fw_ldst_cmd c; memset(&c, 0, sizeof(c)); ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_MDIO); c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | ldst_addrspace); c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); c.u.mdio.paddr_mmd = cpu_to_be16(FW_LDST_CMD_PADDR_V(phy_addr) | FW_LDST_CMD_MMD_V(mmd)); c.u.mdio.raddr = cpu_to_be16(reg); c.u.mdio.rval = cpu_to_be16(val); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_sge_decode_idma_state - decode the idma state * @adap: the adapter * @state: the state idma is stuck in */ void t4_sge_decode_idma_state(struct adapter *adapter, int state) { static const char * const t4_decode[] = { "IDMA_IDLE", "IDMA_PUSH_MORE_CPL_FIFO", "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO", "Not used", "IDMA_PHYSADDR_SEND_PCIEHDR", "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST", "IDMA_PHYSADDR_SEND_PAYLOAD", "IDMA_SEND_FIFO_TO_IMSG", "IDMA_FL_REQ_DATA_FL_PREP", "IDMA_FL_REQ_DATA_FL", "IDMA_FL_DROP", "IDMA_FL_H_REQ_HEADER_FL", "IDMA_FL_H_SEND_PCIEHDR", "IDMA_FL_H_PUSH_CPL_FIFO", "IDMA_FL_H_SEND_CPL", "IDMA_FL_H_SEND_IP_HDR_FIRST", "IDMA_FL_H_SEND_IP_HDR", "IDMA_FL_H_REQ_NEXT_HEADER_FL", "IDMA_FL_H_SEND_NEXT_PCIEHDR", "IDMA_FL_H_SEND_IP_HDR_PADDING", "IDMA_FL_D_SEND_PCIEHDR", "IDMA_FL_D_SEND_CPL_AND_IP_HDR", "IDMA_FL_D_REQ_NEXT_DATA_FL", "IDMA_FL_SEND_PCIEHDR", "IDMA_FL_PUSH_CPL_FIFO", "IDMA_FL_SEND_CPL", "IDMA_FL_SEND_PAYLOAD_FIRST", "IDMA_FL_SEND_PAYLOAD", "IDMA_FL_REQ_NEXT_DATA_FL", "IDMA_FL_SEND_NEXT_PCIEHDR", "IDMA_FL_SEND_PADDING", "IDMA_FL_SEND_COMPLETION_TO_IMSG", "IDMA_FL_SEND_FIFO_TO_IMSG", "IDMA_FL_REQ_DATAFL_DONE", "IDMA_FL_REQ_HEADERFL_DONE", }; static const char * const t5_decode[] = { "IDMA_IDLE", "IDMA_ALMOST_IDLE", "IDMA_PUSH_MORE_CPL_FIFO", "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO", "IDMA_SGEFLRFLUSH_SEND_PCIEHDR", "IDMA_PHYSADDR_SEND_PCIEHDR", "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST", "IDMA_PHYSADDR_SEND_PAYLOAD", "IDMA_SEND_FIFO_TO_IMSG", "IDMA_FL_REQ_DATA_FL", "IDMA_FL_DROP", "IDMA_FL_DROP_SEND_INC", "IDMA_FL_H_REQ_HEADER_FL", "IDMA_FL_H_SEND_PCIEHDR", "IDMA_FL_H_PUSH_CPL_FIFO", "IDMA_FL_H_SEND_CPL", "IDMA_FL_H_SEND_IP_HDR_FIRST", "IDMA_FL_H_SEND_IP_HDR", "IDMA_FL_H_REQ_NEXT_HEADER_FL", "IDMA_FL_H_SEND_NEXT_PCIEHDR", "IDMA_FL_H_SEND_IP_HDR_PADDING", "IDMA_FL_D_SEND_PCIEHDR", "IDMA_FL_D_SEND_CPL_AND_IP_HDR", "IDMA_FL_D_REQ_NEXT_DATA_FL", "IDMA_FL_SEND_PCIEHDR", "IDMA_FL_PUSH_CPL_FIFO", "IDMA_FL_SEND_CPL", "IDMA_FL_SEND_PAYLOAD_FIRST", "IDMA_FL_SEND_PAYLOAD", "IDMA_FL_REQ_NEXT_DATA_FL", "IDMA_FL_SEND_NEXT_PCIEHDR", "IDMA_FL_SEND_PADDING", "IDMA_FL_SEND_COMPLETION_TO_IMSG", }; static const u32 sge_regs[] = { SGE_DEBUG_DATA_LOW_INDEX_2_A, SGE_DEBUG_DATA_LOW_INDEX_3_A, SGE_DEBUG_DATA_HIGH_INDEX_10_A, }; const char **sge_idma_decode; int sge_idma_decode_nstates; int i; if (is_t4(adapter->params.chip)) { sge_idma_decode = (const char **)t4_decode; sge_idma_decode_nstates = ARRAY_SIZE(t4_decode); } else { sge_idma_decode = (const char **)t5_decode; sge_idma_decode_nstates = ARRAY_SIZE(t5_decode); } if (state < sge_idma_decode_nstates) CH_WARN(adapter, "idma state %s\n", sge_idma_decode[state]); else CH_WARN(adapter, "idma state %d unknown\n", state); for (i = 0; i < ARRAY_SIZE(sge_regs); i++) CH_WARN(adapter, "SGE register %#x value %#x\n", sge_regs[i], t4_read_reg(adapter, sge_regs[i])); } /** * t4_sge_ctxt_flush - flush the SGE context cache * @adap: the adapter * @mbox: mailbox to use for the FW command * * Issues a FW command through the given mailbox to flush the * SGE context cache. */ int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox) { int ret; u32 ldst_addrspace; struct fw_ldst_cmd c; memset(&c, 0, sizeof(c)); ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_SGE_EGRC); c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) | FW_CMD_REQUEST_F | FW_CMD_READ_F | ldst_addrspace); c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); c.u.idctxt.msg_ctxtflush = cpu_to_be32(FW_LDST_CMD_CTXTFLUSH_F); ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); return ret; } /** * t4_fw_hello - establish communication with FW * @adap: the adapter * @mbox: mailbox to use for the FW command * @evt_mbox: mailbox to receive async FW events * @master: specifies the caller's willingness to be the device master * @state: returns the current device state (if non-NULL) * * Issues a command to establish communication with FW. Returns either * an error (negative integer) or the mailbox of the Master PF. */ int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, enum dev_master master, enum dev_state *state) { int ret; struct fw_hello_cmd c; u32 v; unsigned int master_mbox; int retries = FW_CMD_HELLO_RETRIES; retry: memset(&c, 0, sizeof(c)); INIT_CMD(c, HELLO, WRITE); c.err_to_clearinit = cpu_to_be32( FW_HELLO_CMD_MASTERDIS_V(master == MASTER_CANT) | FW_HELLO_CMD_MASTERFORCE_V(master == MASTER_MUST) | FW_HELLO_CMD_MBMASTER_V(master == MASTER_MUST ? mbox : FW_HELLO_CMD_MBMASTER_M) | FW_HELLO_CMD_MBASYNCNOT_V(evt_mbox) | FW_HELLO_CMD_STAGE_V(fw_hello_cmd_stage_os) | FW_HELLO_CMD_CLEARINIT_F); /* * Issue the HELLO command to the firmware. If it's not successful * but indicates that we got a "busy" or "timeout" condition, retry * the HELLO until we exhaust our retry limit. If we do exceed our * retry limit, check to see if the firmware left us any error * information and report that if so. */ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); if (ret < 0) { if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0) goto retry; if (t4_read_reg(adap, PCIE_FW_A) & PCIE_FW_ERR_F) t4_report_fw_error(adap); return ret; } v = be32_to_cpu(c.err_to_clearinit); master_mbox = FW_HELLO_CMD_MBMASTER_G(v); if (state) { if (v & FW_HELLO_CMD_ERR_F) *state = DEV_STATE_ERR; else if (v & FW_HELLO_CMD_INIT_F) *state = DEV_STATE_INIT; else *state = DEV_STATE_UNINIT; } /* * If we're not the Master PF then we need to wait around for the * Master PF Driver to finish setting up the adapter. * * Note that we also do this wait if we're a non-Master-capable PF and * there is no current Master PF; a Master PF may show up momentarily * and we wouldn't want to fail pointlessly. (This can happen when an * OS loads lots of different drivers rapidly at the same time). In * this case, the Master PF returned by the firmware will be * PCIE_FW_MASTER_M so the test below will work ... */ if ((v & (FW_HELLO_CMD_ERR_F|FW_HELLO_CMD_INIT_F)) == 0 && master_mbox != mbox) { int waiting = FW_CMD_HELLO_TIMEOUT; /* * Wait for the firmware to either indicate an error or * initialized state. If we see either of these we bail out * and report the issue to the caller. If we exhaust the * "hello timeout" and we haven't exhausted our retries, try * again. Otherwise bail with a timeout error. */ for (;;) { u32 pcie_fw; msleep(50); waiting -= 50; /* * If neither Error nor Initialialized are indicated * by the firmware keep waiting till we exaust our * timeout ... and then retry if we haven't exhausted * our retries ... */ pcie_fw = t4_read_reg(adap, PCIE_FW_A); if (!(pcie_fw & (PCIE_FW_ERR_F|PCIE_FW_INIT_F))) { if (waiting <= 0) { if (retries-- > 0) goto retry; return -ETIMEDOUT; } continue; } /* * We either have an Error or Initialized condition * report errors preferentially. */ if (state) { if (pcie_fw & PCIE_FW_ERR_F) *state = DEV_STATE_ERR; else if (pcie_fw & PCIE_FW_INIT_F) *state = DEV_STATE_INIT; } /* * If we arrived before a Master PF was selected and * there's not a valid Master PF, grab its identity * for our caller. */ if (master_mbox == PCIE_FW_MASTER_M && (pcie_fw & PCIE_FW_MASTER_VLD_F)) master_mbox = PCIE_FW_MASTER_G(pcie_fw); break; } } return master_mbox; } /** * t4_fw_bye - end communication with FW * @adap: the adapter * @mbox: mailbox to use for the FW command * * Issues a command to terminate communication with FW. */ int t4_fw_bye(struct adapter *adap, unsigned int mbox) { struct fw_bye_cmd c; memset(&c, 0, sizeof(c)); INIT_CMD(c, BYE, WRITE); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_init_cmd - ask FW to initialize the device * @adap: the adapter * @mbox: mailbox to use for the FW command * * Issues a command to FW to partially initialize the device. This * performs initialization that generally doesn't depend on user input. */ int t4_early_init(struct adapter *adap, unsigned int mbox) { struct fw_initialize_cmd c; memset(&c, 0, sizeof(c)); INIT_CMD(c, INITIALIZE, WRITE); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_fw_reset - issue a reset to FW * @adap: the adapter * @mbox: mailbox to use for the FW command * @reset: specifies the type of reset to perform * * Issues a reset command of the specified type to FW. */ int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset) { struct fw_reset_cmd c; memset(&c, 0, sizeof(c)); INIT_CMD(c, RESET, WRITE); c.val = cpu_to_be32(reset); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_fw_halt - issue a reset/halt to FW and put uP into RESET * @adap: the adapter * @mbox: mailbox to use for the FW RESET command (if desired) * @force: force uP into RESET even if FW RESET command fails * * Issues a RESET command to firmware (if desired) with a HALT indication * and then puts the microprocessor into RESET state. The RESET command * will only be issued if a legitimate mailbox is provided (mbox <= * PCIE_FW_MASTER_M). * * This is generally used in order for the host to safely manipulate the * adapter without fear of conflicting with whatever the firmware might * be doing. The only way out of this state is to RESTART the firmware * ... */ static int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force) { int ret = 0; /* * If a legitimate mailbox is provided, issue a RESET command * with a HALT indication. */ if (mbox <= PCIE_FW_MASTER_M) { struct fw_reset_cmd c; memset(&c, 0, sizeof(c)); INIT_CMD(c, RESET, WRITE); c.val = cpu_to_be32(PIORST_F | PIORSTMODE_F); c.halt_pkd = cpu_to_be32(FW_RESET_CMD_HALT_F); ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /* * Normally we won't complete the operation if the firmware RESET * command fails but if our caller insists we'll go ahead and put the * uP into RESET. This can be useful if the firmware is hung or even * missing ... We'll have to take the risk of putting the uP into * RESET without the cooperation of firmware in that case. * * We also force the firmware's HALT flag to be on in case we bypassed * the firmware RESET command above or we're dealing with old firmware * which doesn't have the HALT capability. This will serve as a flag * for the incoming firmware to know that it's coming out of a HALT * rather than a RESET ... if it's new enough to understand that ... */ if (ret == 0 || force) { t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, UPCRST_F); t4_set_reg_field(adap, PCIE_FW_A, PCIE_FW_HALT_F, PCIE_FW_HALT_F); } /* * And we always return the result of the firmware RESET command * even when we force the uP into RESET ... */ return ret; } /** * t4_fw_restart - restart the firmware by taking the uP out of RESET * @adap: the adapter * @reset: if we want to do a RESET to restart things * * Restart firmware previously halted by t4_fw_halt(). On successful * return the previous PF Master remains as the new PF Master and there * is no need to issue a new HELLO command, etc. * * We do this in two ways: * * 1. If we're dealing with newer firmware we'll simply want to take * the chip's microprocessor out of RESET. This will cause the * firmware to start up from its start vector. And then we'll loop * until the firmware indicates it's started again (PCIE_FW.HALT * reset to 0) or we timeout. * * 2. If we're dealing with older firmware then we'll need to RESET * the chip since older firmware won't recognize the PCIE_FW.HALT * flag and automatically RESET itself on startup. */ static int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset) { if (reset) { /* * Since we're directing the RESET instead of the firmware * doing it automatically, we need to clear the PCIE_FW.HALT * bit. */ t4_set_reg_field(adap, PCIE_FW_A, PCIE_FW_HALT_F, 0); /* * If we've been given a valid mailbox, first try to get the * firmware to do the RESET. If that works, great and we can * return success. Otherwise, if we haven't been given a * valid mailbox or the RESET command failed, fall back to * hitting the chip with a hammer. */ if (mbox <= PCIE_FW_MASTER_M) { t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, 0); msleep(100); if (t4_fw_reset(adap, mbox, PIORST_F | PIORSTMODE_F) == 0) return 0; } t4_write_reg(adap, PL_RST_A, PIORST_F | PIORSTMODE_F); msleep(2000); } else { int ms; t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, 0); for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { if (!(t4_read_reg(adap, PCIE_FW_A) & PCIE_FW_HALT_F)) return 0; msleep(100); ms += 100; } return -ETIMEDOUT; } return 0; } /** * t4_fw_upgrade - perform all of the steps necessary to upgrade FW * @adap: the adapter * @mbox: mailbox to use for the FW RESET command (if desired) * @fw_data: the firmware image to write * @size: image size * @force: force upgrade even if firmware doesn't cooperate * * Perform all of the steps necessary for upgrading an adapter's * firmware image. Normally this requires the cooperation of the * existing firmware in order to halt all existing activities * but if an invalid mailbox token is passed in we skip that step * (though we'll still put the adapter microprocessor into RESET in * that case). * * On successful return the new firmware will have been loaded and * the adapter will have been fully RESET losing all previous setup * state. On unsuccessful return the adapter may be completely hosed ... * positive errno indicates that the adapter is ~probably~ intact, a * negative errno indicates that things are looking bad ... */ int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, const u8 *fw_data, unsigned int size, int force) { const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data; int reset, ret; if (!t4_fw_matches_chip(adap, fw_hdr)) return -EINVAL; /* Disable FW_OK flag so that mbox commands with FW_OK flag set * wont be sent when we are flashing FW. */ adap->flags &= ~FW_OK; ret = t4_fw_halt(adap, mbox, force); if (ret < 0 && !force) goto out; ret = t4_load_fw(adap, fw_data, size); if (ret < 0) goto out; /* * Older versions of the firmware don't understand the new * PCIE_FW.HALT flag and so won't know to perform a RESET when they * restart. So for newly loaded older firmware we'll have to do the * RESET for it so it starts up on a clean slate. We can tell if * the newly loaded firmware will handle this right by checking * its header flags to see if it advertises the capability. */ reset = ((be32_to_cpu(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); ret = t4_fw_restart(adap, mbox, reset); /* Grab potentially new Firmware Device Log parameters so we can see * how healthy the new Firmware is. It's okay to contact the new * Firmware for these parameters even though, as far as it's * concerned, we've never said "HELLO" to it ... */ (void)t4_init_devlog_params(adap); out: adap->flags |= FW_OK; return ret; } /** * t4_fixup_host_params - fix up host-dependent parameters * @adap: the adapter * @page_size: the host's Base Page Size * @cache_line_size: the host's Cache Line Size * * Various registers in T4 contain values which are dependent on the * host's Base Page and Cache Line Sizes. This function will fix all of * those registers with the appropriate values as passed in ... */ int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, unsigned int cache_line_size) { unsigned int page_shift = fls(page_size) - 1; unsigned int sge_hps = page_shift - 10; unsigned int stat_len = cache_line_size > 64 ? 128 : 64; unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size; unsigned int fl_align_log = fls(fl_align) - 1; t4_write_reg(adap, SGE_HOST_PAGE_SIZE_A, HOSTPAGESIZEPF0_V(sge_hps) | HOSTPAGESIZEPF1_V(sge_hps) | HOSTPAGESIZEPF2_V(sge_hps) | HOSTPAGESIZEPF3_V(sge_hps) | HOSTPAGESIZEPF4_V(sge_hps) | HOSTPAGESIZEPF5_V(sge_hps) | HOSTPAGESIZEPF6_V(sge_hps) | HOSTPAGESIZEPF7_V(sge_hps)); if (is_t4(adap->params.chip)) { t4_set_reg_field(adap, SGE_CONTROL_A, INGPADBOUNDARY_V(INGPADBOUNDARY_M) | EGRSTATUSPAGESIZE_F, INGPADBOUNDARY_V(fl_align_log - INGPADBOUNDARY_SHIFT_X) | EGRSTATUSPAGESIZE_V(stat_len != 64)); } else { /* T5 introduced the separation of the Free List Padding and * Packing Boundaries. Thus, we can select a smaller Padding * Boundary to avoid uselessly chewing up PCIe Link and Memory * Bandwidth, and use a Packing Boundary which is large enough * to avoid false sharing between CPUs, etc. * * For the PCI Link, the smaller the Padding Boundary the * better. For the Memory Controller, a smaller Padding * Boundary is better until we cross under the Memory Line * Size (the minimum unit of transfer to/from Memory). If we * have a Padding Boundary which is smaller than the Memory * Line Size, that'll involve a Read-Modify-Write cycle on the * Memory Controller which is never good. For T5 the smallest * Padding Boundary which we can select is 32 bytes which is * larger than any known Memory Controller Line Size so we'll * use that. * * T5 has a different interpretation of the "0" value for the * Packing Boundary. This corresponds to 16 bytes instead of * the expected 32 bytes. We never have a Packing Boundary * less than 32 bytes so we can't use that special value but * on the other hand, if we wanted 32 bytes, the best we can * really do is 64 bytes. */ if (fl_align <= 32) { fl_align = 64; fl_align_log = 6; } t4_set_reg_field(adap, SGE_CONTROL_A, INGPADBOUNDARY_V(INGPADBOUNDARY_M) | EGRSTATUSPAGESIZE_F, INGPADBOUNDARY_V(INGPCIEBOUNDARY_32B_X) | EGRSTATUSPAGESIZE_V(stat_len != 64)); t4_set_reg_field(adap, SGE_CONTROL2_A, INGPACKBOUNDARY_V(INGPACKBOUNDARY_M), INGPACKBOUNDARY_V(fl_align_log - INGPACKBOUNDARY_SHIFT_X)); } /* * Adjust various SGE Free List Host Buffer Sizes. * * This is something of a crock since we're using fixed indices into * the array which are also known by the sge.c code and the T4 * Firmware Configuration File. We need to come up with a much better * approach to managing this array. For now, the first four entries * are: * * 0: Host Page Size * 1: 64KB * 2: Buffer size corresponding to 1500 byte MTU (unpacked mode) * 3: Buffer size corresponding to 9000 byte MTU (unpacked mode) * * For the single-MTU buffers in unpacked mode we need to include * space for the SGE Control Packet Shift, 14 byte Ethernet header, * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet * Padding boundary. All of these are accommodated in the Factory * Default Firmware Configuration File but we need to adjust it for * this host's cache line size. */ t4_write_reg(adap, SGE_FL_BUFFER_SIZE0_A, page_size); t4_write_reg(adap, SGE_FL_BUFFER_SIZE2_A, (t4_read_reg(adap, SGE_FL_BUFFER_SIZE2_A) + fl_align-1) & ~(fl_align-1)); t4_write_reg(adap, SGE_FL_BUFFER_SIZE3_A, (t4_read_reg(adap, SGE_FL_BUFFER_SIZE3_A) + fl_align-1) & ~(fl_align-1)); t4_write_reg(adap, ULP_RX_TDDP_PSZ_A, HPZ0_V(page_shift - 12)); return 0; } /** * t4_fw_initialize - ask FW to initialize the device * @adap: the adapter * @mbox: mailbox to use for the FW command * * Issues a command to FW to partially initialize the device. This * performs initialization that generally doesn't depend on user input. */ int t4_fw_initialize(struct adapter *adap, unsigned int mbox) { struct fw_initialize_cmd c; memset(&c, 0, sizeof(c)); INIT_CMD(c, INITIALIZE, WRITE); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_query_params_rw - query FW or device parameters * @adap: the adapter * @mbox: mailbox to use for the FW command * @pf: the PF * @vf: the VF * @nparams: the number of parameters * @params: the parameter names * @val: the parameter values * @rw: Write and read flag * * Reads the value of FW or device parameters. Up to 7 parameters can be * queried at once. */ int t4_query_params_rw(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int nparams, const u32 *params, u32 *val, int rw) { int i, ret; struct fw_params_cmd c; __be32 *p = &c.param[0].mnem; if (nparams > 7) return -EINVAL; memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) | FW_CMD_REQUEST_F | FW_CMD_READ_F | FW_PARAMS_CMD_PFN_V(pf) | FW_PARAMS_CMD_VFN_V(vf)); c.retval_len16 = cpu_to_be32(FW_LEN16(c)); for (i = 0; i < nparams; i++) { *p++ = cpu_to_be32(*params++); if (rw) *p = cpu_to_be32(*(val + i)); p++; } ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); if (ret == 0) for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2) *val++ = be32_to_cpu(*p); return ret; } int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int nparams, const u32 *params, u32 *val) { return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0); } /** * t4_set_params_timeout - sets FW or device parameters * @adap: the adapter * @mbox: mailbox to use for the FW command * @pf: the PF * @vf: the VF * @nparams: the number of parameters * @params: the parameter names * @val: the parameter values * @timeout: the timeout time * * Sets the value of FW or device parameters. Up to 7 parameters can be * specified at once. */ int t4_set_params_timeout(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int nparams, const u32 *params, const u32 *val, int timeout) { struct fw_params_cmd c; __be32 *p = &c.param[0].mnem; if (nparams > 7) return -EINVAL; memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | FW_PARAMS_CMD_PFN_V(pf) | FW_PARAMS_CMD_VFN_V(vf)); c.retval_len16 = cpu_to_be32(FW_LEN16(c)); while (nparams--) { *p++ = cpu_to_be32(*params++); *p++ = cpu_to_be32(*val++); } return t4_wr_mbox_timeout(adap, mbox, &c, sizeof(c), NULL, timeout); } /** * t4_set_params - sets FW or device parameters * @adap: the adapter * @mbox: mailbox to use for the FW command * @pf: the PF * @vf: the VF * @nparams: the number of parameters * @params: the parameter names * @val: the parameter values * * Sets the value of FW or device parameters. Up to 7 parameters can be * specified at once. */ int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int nparams, const u32 *params, const u32 *val) { return t4_set_params_timeout(adap, mbox, pf, vf, nparams, params, val, FW_CMD_MAX_TIMEOUT); } /** * t4_cfg_pfvf - configure PF/VF resource limits * @adap: the adapter * @mbox: mailbox to use for the FW command * @pf: the PF being configured * @vf: the VF being configured * @txq: the max number of egress queues * @txq_eth_ctrl: the max number of egress Ethernet or control queues * @rxqi: the max number of interrupt-capable ingress queues * @rxq: the max number of interruptless ingress queues * @tc: the PCI traffic class * @vi: the max number of virtual interfaces * @cmask: the channel access rights mask for the PF/VF * @pmask: the port access rights mask for the PF/VF * @nexact: the maximum number of exact MPS filters * @rcaps: read capabilities * @wxcaps: write/execute capabilities * * Configures resource limits and capabilities for a physical or virtual * function. */ int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl, unsigned int rxqi, unsigned int rxq, unsigned int tc, unsigned int vi, unsigned int cmask, unsigned int pmask, unsigned int nexact, unsigned int rcaps, unsigned int wxcaps) { struct fw_pfvf_cmd c; memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PFVF_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | FW_PFVF_CMD_PFN_V(pf) | FW_PFVF_CMD_VFN_V(vf)); c.retval_len16 = cpu_to_be32(FW_LEN16(c)); c.niqflint_niq = cpu_to_be32(FW_PFVF_CMD_NIQFLINT_V(rxqi) | FW_PFVF_CMD_NIQ_V(rxq)); c.type_to_neq = cpu_to_be32(FW_PFVF_CMD_CMASK_V(cmask) | FW_PFVF_CMD_PMASK_V(pmask) | FW_PFVF_CMD_NEQ_V(txq)); c.tc_to_nexactf = cpu_to_be32(FW_PFVF_CMD_TC_V(tc) | FW_PFVF_CMD_NVI_V(vi) | FW_PFVF_CMD_NEXACTF_V(nexact)); c.r_caps_to_nethctrl = cpu_to_be32(FW_PFVF_CMD_R_CAPS_V(rcaps) | FW_PFVF_CMD_WX_CAPS_V(wxcaps) | FW_PFVF_CMD_NETHCTRL_V(txq_eth_ctrl)); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_alloc_vi - allocate a virtual interface * @adap: the adapter * @mbox: mailbox to use for the FW command * @port: physical port associated with the VI * @pf: the PF owning the VI * @vf: the VF owning the VI * @nmac: number of MAC addresses needed (1 to 5) * @mac: the MAC addresses of the VI * @rss_size: size of RSS table slice associated with this VI * * Allocates a virtual interface for the given physical port. If @mac is * not %NULL it contains the MAC addresses of the VI as assigned by FW. * @mac should be large enough to hold @nmac Ethernet addresses, they are * stored consecutively so the space needed is @nmac * 6 bytes. * Returns a negative error number or the non-negative VI id. */ int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port, unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac, unsigned int *rss_size) { int ret; struct fw_vi_cmd c; memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | FW_CMD_EXEC_F | FW_VI_CMD_PFN_V(pf) | FW_VI_CMD_VFN_V(vf)); c.alloc_to_len16 = cpu_to_be32(FW_VI_CMD_ALLOC_F | FW_LEN16(c)); c.portid_pkd = FW_VI_CMD_PORTID_V(port); c.nmac = nmac - 1; ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); if (ret) return ret; if (mac) { memcpy(mac, c.mac, sizeof(c.mac)); switch (nmac) { case 5: memcpy(mac + 24, c.nmac3, sizeof(c.nmac3)); case 4: memcpy(mac + 18, c.nmac2, sizeof(c.nmac2)); case 3: memcpy(mac + 12, c.nmac1, sizeof(c.nmac1)); case 2: memcpy(mac + 6, c.nmac0, sizeof(c.nmac0)); } } if (rss_size) *rss_size = FW_VI_CMD_RSSSIZE_G(be16_to_cpu(c.rsssize_pkd)); return FW_VI_CMD_VIID_G(be16_to_cpu(c.type_viid)); } /** * t4_free_vi - free a virtual interface * @adap: the adapter * @mbox: mailbox to use for the FW command * @pf: the PF owning the VI * @vf: the VF owning the VI * @viid: virtual interface identifiler * * Free a previously allocated virtual interface. */ int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int viid) { struct fw_vi_cmd c; memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD) | FW_CMD_REQUEST_F | FW_CMD_EXEC_F | FW_VI_CMD_PFN_V(pf) | FW_VI_CMD_VFN_V(vf)); c.alloc_to_len16 = cpu_to_be32(FW_VI_CMD_FREE_F | FW_LEN16(c)); c.type_viid = cpu_to_be16(FW_VI_CMD_VIID_V(viid)); return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); } /** * t4_set_rxmode - set Rx properties of a virtual interface * @adap: the adapter * @mbox: mailbox to use for the FW command * @viid: the VI id * @mtu: the new MTU or -1 * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change * @vlanex: 1 to enable HW VLAN extraction, 0 to disable it, -1 no change * @sleep_ok: if true we may sleep while awaiting command completion * * Sets Rx properties of a virtual interface. */ int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid, int mtu, int promisc, int all_multi, int bcast, int vlanex, bool sleep_ok) { struct fw_vi_rxmode_cmd c; /* convert to FW values */ if (mtu < 0) mtu = FW_RXMODE_MTU_NO_CHG; if (promisc < 0) promisc = FW_VI_RXMODE_CMD_PROMISCEN_M; if (all_multi < 0) all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_M; if (bcast < 0) bcast = FW_VI_RXMODE_CMD_BROADCASTEN_M; if (vlanex < 0) vlanex = FW_VI_RXMODE_CMD_VLANEXEN_M; memset(&c, 0, sizeof(c)); c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_RXMODE_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | FW_VI_RXMODE_CMD_VIID_V(viid)); c.retval_len16 = cpu_to_be32(FW_LEN16(c)); c.mtu_to_vlanexen = cpu_to_be32(FW_VI_RXMODE_CMD_MTU_V(mtu) | FW_VI_RXMODE_CMD_PROMISCEN_V(promisc) | FW_VI_RXMODE_CMD_ALLMULTIEN_V(all_multi) | FW_VI_RXMODE_CMD_BROADCASTEN_V(bcast) | FW_VI_RXMODE_CMD_VLANEXEN_V(vlanex)); return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); } /** * t4_alloc_mac_filt - allocates exact-match filters for MAC addresses * @adap: the adapter * @mbox: mailbox to use for the FW command * @viid: the VI id * @free: if true any existing filters for this VI id are first removed * @naddr: the number of MAC addresses to allocate filters for (up to 7) * @addr: the MAC address(es) * @idx: where to store the index of each allocated filter * @hash: pointer to hash address filter bitmap * @sleep_ok: call is allowed to sleep * * Allocates an exact-match filter for each of the supplied addresses and * sets it to the corresponding address. If @idx is not %NULL it should * have at least @naddr entries, each of which will be set to the index of * the filter allocated for the corresponding MAC address. If a filter * could not be allocated for an address its index is set to 0xffff. * If @hash is not %NULL addresses that fail to allocate an exact filter * are hashed and update the hash filter bitmap pointed at by @hash. * * Returns a negative error number or the number of filters allocated. */ int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox, unsigned int viid, bool free, unsigned int naddr, const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok) { int offset, ret = 0; struct fw_vi_mac_cmd c; unsigned int nfilters = 0; unsigned int max_naddr = adap->params.arch.mps_tcam_size; unsigned int rem = naddr; if (naddr > max_naddr) return -EINVAL; for (offset = 0; offset < naddr ; /**/) { unsigned int fw_naddr = (rem < ARRAY_SIZE(c.u.exact) ? rem : ARRAY_SIZE(c.u.exact)); size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, u.exact[fw_naddr]), 16); struct fw_vi_mac_exact *p; int i; memset(&c, 0, sizeof(c)); c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | FW_CMD_EXEC_V(free) | FW_VI_MAC_CMD_VIID_V(viid)); c.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(free) | FW_CMD_LEN16_V(len16)); for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) { p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F | FW_VI_MAC_CMD_IDX_V( FW_VI_MAC_ADD_MAC)); memcpy(p->macaddr, addr[offset + i], sizeof(p->macaddr)); } /* It's okay if we run out of space in our MAC address arena. * Some of the addresses we submit may get stored so we need * to run through the reply to see what the results were ... */ ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok); if (ret && ret != -FW_ENOMEM) break; for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) { u16 index = FW_VI_MAC_CMD_IDX_G( be16_to_cpu(p->valid_to_idx)); if (idx) idx[offset + i] = (index >= max_naddr ? 0xffff : index); if (index < max_naddr) nfilters++; else if (hash) *hash |= (1ULL << hash_mac_addr(addr[offset + i])); } free = false; offset += fw_naddr; rem -= fw_naddr; } if (ret == 0 || ret == -FW_ENOMEM) ret = nfilters; return ret; } /** * t4_change_mac - modifies the exact-match filter for a MAC address * @adap: the adapter * @mbox: mailbox to use for the FW command * @viid: the VI id * @idx: index of existing filter for old value of MAC address, or -1 * @addr: the new MAC address value * @persist: whether a new MAC allocation should be persistent * @add_smt: if true also add the address to the HW SMT * * Modifies an exact-match filter and sets it to the new MAC address. * Note that in general it is not possible to modify the value of a given * filter so the generic way to modify an address filter is to free the one * being used by the old address value and allocate a new filter for the * new address value. @idx can be -1 if the address is a new addition. * * Returns a negative error number or the index of the filter with the new * MAC value. */ int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid, int idx, const u8 *addr, bool persist, bool add_smt) { int ret, mode; struct fw_vi_mac_cmd c; struct fw_vi_mac_exact *p = c.u.exact; unsigned int max_mac_addr = adap->params.arch.mps_tcam_size; if (idx < 0) /* new allocation */ idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC; mode = add_smt ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY; memset(&c, 0, sizeof(c)); c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | FW_VI_MAC_CMD_VIID_V(viid)); c.freemacs_to_len16 = cpu_to_be32(FW_CMD_LEN16_V(1)); p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F | FW_VI_MAC_CMD_SMAC_RESULT_V(mode) | FW_VI_MAC_CMD_IDX_V(idx)); memcpy(p->macaddr, addr, sizeof(p->macaddr)); ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); if (ret == 0) { ret = FW_VI_MAC_CMD_IDX_G(be16_to_cpu(p->valid_to_idx)); if (ret >= max_mac_addr) ret = -ENOMEM; } return ret; } /** * t4_set_addr_hash - program the MAC inexact-match hash filter * @adap: the adapter * @mbox: mailbox to use for the FW command * @viid: the VI id * @ucast: whether the hash filter should also match unicast addresses * @vec: the value to be written to the hash filter * @sleep_ok: call is allowed to sleep * * Sets the 64-bit inexact-match hash filter for a virtual interface. */ int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid, bool ucast, u64 vec, bool sleep_ok) { struct fw_vi_mac_cmd c; memset(&c, 0, sizeof(c)); c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) | FW_CMD_REQUEST_F | FW_CMD_WRITE_F | FW_VI_ENABLE_CMD_VIID_V(viid)); c.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_HASHVECEN_F | FW_VI_MAC_CMD_HASHUNIEN_V(ucast) | FW_CMD_LEN16_V(1)); c.u.hash.hashvec = cpu_to_be64(vec); return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); } /** * t4_enable_vi_params - enable/disable a virtual interface * @adap: the adapter * @mbox: mailbox to use for the FW command * @viid: the VI id * @rx_en: 1=enable Rx, 0=disable Rx * @tx_en: 1=enable Tx, 0=disable Tx * @dcb_en: 1=enable delivery of Data Center Bridging messages. * * Enables/disables a virtual interface. Note that setting DCB Enable * only makes sense when enabling a Virtual Interface ... */ int t4_enable_vi_params(struct adapter *adap, unsigned int mbox, unsigned int viid, bool rx_en, bool tx_en, bool dcb_en) { struct fw_vi_enable_cmd c; memset(&c, 0, sizeof(c)); c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST_F | FW_CMD_EXEC_F | FW_VI_ENABLE_CMD_VIID_V(viid)); c.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_IEN_V(rx_en) | FW_VI_ENABLE_CMD_EEN_V(tx_en) | FW_VI_ENABLE_CMD_DCB_INFO_V(dcb_en) | FW_LEN16(c)); return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL); } /** * t4_enable_vi - enable/disable a virtual interface * @adap: the adapter * @mbox: mailbox to use for the FW command * @viid: the VI id * @rx_en: 1=enable Rx, 0=disable Rx * @tx_en: 1=enable Tx, 0=disable Tx * * Enables/disables a virtual interface. */ int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid, bool rx_en, bool tx_en) { return t4_enable_vi_params(adap, mbox, viid, rx_en, tx_en, 0); } /** * t4_identify_port - identify a VI's port by blinking its LED * @adap: the adapter * @mbox: mailbox to use for the FW command * @viid: the VI id * @nblinks: how many times to blink LED at 2.5 Hz * * Identifies a VI's port by blinking its LED. */ int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid, unsigned int nblinks) { struct fw_vi_enable_cmd c; memset(&c, 0, sizeof(c)); c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST_F | FW_CMD_EXEC_F | FW_VI_ENABLE_CMD_VIID_V(viid)); c.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_LED_F | FW_LEN16(c)); c.blinkdur = cpu_to_be16(nblinks); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_iq_free - free an ingress queue and its FLs * @adap: the adapter * @mbox: mailbox to use for the FW command * @pf: the PF owning the queues * @vf: the VF owning the queues * @iqtype: the ingress queue type * @iqid: ingress queue id * @fl0id: FL0 queue id or 0xffff if no attached FL0 * @fl1id: FL1 queue id or 0xffff if no attached FL1 * * Frees an ingress queue and its associated FLs, if any. */ int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int iqtype, unsigned int iqid, unsigned int fl0id, unsigned int fl1id) { struct fw_iq_cmd c; memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_IQ_CMD) | FW_CMD_REQUEST_F | FW_CMD_EXEC_F | FW_IQ_CMD_PFN_V(pf) | FW_IQ_CMD_VFN_V(vf)); c.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_FREE_F | FW_LEN16(c)); c.type_to_iqandstindex = cpu_to_be32(FW_IQ_CMD_TYPE_V(iqtype)); c.iqid = cpu_to_be16(iqid); c.fl0id = cpu_to_be16(fl0id); c.fl1id = cpu_to_be16(fl1id); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_eth_eq_free - free an Ethernet egress queue * @adap: the adapter * @mbox: mailbox to use for the FW command * @pf: the PF owning the queue * @vf: the VF owning the queue * @eqid: egress queue id * * Frees an Ethernet egress queue. */ int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int eqid) { struct fw_eq_eth_cmd c; memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_ETH_CMD) | FW_CMD_REQUEST_F | FW_CMD_EXEC_F | FW_EQ_ETH_CMD_PFN_V(pf) | FW_EQ_ETH_CMD_VFN_V(vf)); c.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_FREE_F | FW_LEN16(c)); c.eqid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_EQID_V(eqid)); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_ctrl_eq_free - free a control egress queue * @adap: the adapter * @mbox: mailbox to use for the FW command * @pf: the PF owning the queue * @vf: the VF owning the queue * @eqid: egress queue id * * Frees a control egress queue. */ int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int eqid) { struct fw_eq_ctrl_cmd c; memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_CTRL_CMD) | FW_CMD_REQUEST_F | FW_CMD_EXEC_F | FW_EQ_CTRL_CMD_PFN_V(pf) | FW_EQ_CTRL_CMD_VFN_V(vf)); c.alloc_to_len16 = cpu_to_be32(FW_EQ_CTRL_CMD_FREE_F | FW_LEN16(c)); c.cmpliqid_eqid = cpu_to_be32(FW_EQ_CTRL_CMD_EQID_V(eqid)); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_ofld_eq_free - free an offload egress queue * @adap: the adapter * @mbox: mailbox to use for the FW command * @pf: the PF owning the queue * @vf: the VF owning the queue * @eqid: egress queue id * * Frees a control egress queue. */ int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int eqid) { struct fw_eq_ofld_cmd c; memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_OFLD_CMD) | FW_CMD_REQUEST_F | FW_CMD_EXEC_F | FW_EQ_OFLD_CMD_PFN_V(pf) | FW_EQ_OFLD_CMD_VFN_V(vf)); c.alloc_to_len16 = cpu_to_be32(FW_EQ_OFLD_CMD_FREE_F | FW_LEN16(c)); c.eqid_pkd = cpu_to_be32(FW_EQ_OFLD_CMD_EQID_V(eqid)); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } /** * t4_handle_fw_rpl - process a FW reply message * @adap: the adapter * @rpl: start of the FW message * * Processes a FW message, such as link state change messages. */ int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl) { u8 opcode = *(const u8 *)rpl; if (opcode == FW_PORT_CMD) { /* link/module state change message */ int speed = 0, fc = 0; const struct fw_port_cmd *p = (void *)rpl; int chan = FW_PORT_CMD_PORTID_G(be32_to_cpu(p->op_to_portid)); int port = adap->chan_map[chan]; struct port_info *pi = adap2pinfo(adap, port); struct link_config *lc = &pi->link_cfg; u32 stat = be32_to_cpu(p->u.info.lstatus_to_modtype); int link_ok = (stat & FW_PORT_CMD_LSTATUS_F) != 0; u32 mod = FW_PORT_CMD_MODTYPE_G(stat); if (stat & FW_PORT_CMD_RXPAUSE_F) fc |= PAUSE_RX; if (stat & FW_PORT_CMD_TXPAUSE_F) fc |= PAUSE_TX; if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M)) speed = 100; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G)) speed = 1000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) speed = 10000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) speed = 40000; if (link_ok != lc->link_ok || speed != lc->speed || fc != lc->fc) { /* something changed */ lc->link_ok = link_ok; lc->speed = speed; lc->fc = fc; lc->supported = be16_to_cpu(p->u.info.pcap); t4_os_link_changed(adap, port, link_ok); } if (mod != pi->mod_type) { pi->mod_type = mod; t4_os_portmod_changed(adap, port); } } return 0; } static void get_pci_mode(struct adapter *adapter, struct pci_params *p) { u16 val; if (pci_is_pcie(adapter->pdev)) { pcie_capability_read_word(adapter->pdev, PCI_EXP_LNKSTA, &val); p->speed = val & PCI_EXP_LNKSTA_CLS; p->width = (val & PCI_EXP_LNKSTA_NLW) >> 4; } } /** * init_link_config - initialize a link's SW state * @lc: structure holding the link state * @caps: link capabilities * * Initializes the SW state maintained for each link, including the link's * capabilities and default speed/flow-control/autonegotiation settings. */ static void init_link_config(struct link_config *lc, unsigned int caps) { lc->supported = caps; lc->requested_speed = 0; lc->speed = 0; lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; if (lc->supported & FW_PORT_CAP_ANEG) { lc->advertising = lc->supported & ADVERT_MASK; lc->autoneg = AUTONEG_ENABLE; lc->requested_fc |= PAUSE_AUTONEG; } else { lc->advertising = 0; lc->autoneg = AUTONEG_DISABLE; } } #define CIM_PF_NOACCESS 0xeeeeeeee int t4_wait_dev_ready(void __iomem *regs) { u32 whoami; whoami = readl(regs + PL_WHOAMI_A); if (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS) return 0; msleep(500); whoami = readl(regs + PL_WHOAMI_A); return (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS ? 0 : -EIO); } struct flash_desc { u32 vendor_and_model_id; u32 size_mb; }; static int get_flash_params(struct adapter *adap) { /* Table for non-Numonix supported flash parts. Numonix parts are left * to the preexisting code. All flash parts have 64KB sectors. */ static struct flash_desc supported_flash[] = { { 0x150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ }; int ret; u32 info; ret = sf1_write(adap, 1, 1, 0, SF_RD_ID); if (!ret) ret = sf1_read(adap, 3, 0, 1, &info); t4_write_reg(adap, SF_OP_A, 0); /* unlock SF */ if (ret) return ret; for (ret = 0; ret < ARRAY_SIZE(supported_flash); ++ret) if (supported_flash[ret].vendor_and_model_id == info) { adap->params.sf_size = supported_flash[ret].size_mb; adap->params.sf_nsec = adap->params.sf_size / SF_SEC_SIZE; return 0; } if ((info & 0xff) != 0x20) /* not a Numonix flash */ return -EINVAL; info >>= 16; /* log2 of size */ if (info >= 0x14 && info < 0x18) adap->params.sf_nsec = 1 << (info - 16); else if (info == 0x18) adap->params.sf_nsec = 64; else return -EINVAL; adap->params.sf_size = 1 << info; adap->params.sf_fw_start = t4_read_reg(adap, CIM_BOOT_CFG_A) & BOOTADDR_M; if (adap->params.sf_size < FLASH_MIN_SIZE) dev_warn(adap->pdev_dev, "WARNING!!! FLASH size %#x < %#x!!!\n", adap->params.sf_size, FLASH_MIN_SIZE); return 0; } static void set_pcie_completion_timeout(struct adapter *adapter, u8 range) { u16 val; u32 pcie_cap; pcie_cap = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); if (pcie_cap) { pci_read_config_word(adapter->pdev, pcie_cap + PCI_EXP_DEVCTL2, &val); val &= ~PCI_EXP_DEVCTL2_COMP_TIMEOUT; val |= range; pci_write_config_word(adapter->pdev, pcie_cap + PCI_EXP_DEVCTL2, val); } } /** * t4_prep_adapter - prepare SW and HW for operation * @adapter: the adapter * @reset: if true perform a HW reset * * Initialize adapter SW state for the various HW modules, set initial * values for some adapter tunables, take PHYs out of reset, and * initialize the MDIO interface. */ int t4_prep_adapter(struct adapter *adapter) { int ret, ver; uint16_t device_id; u32 pl_rev; get_pci_mode(adapter, &adapter->params.pci); pl_rev = REV_G(t4_read_reg(adapter, PL_REV_A)); ret = get_flash_params(adapter); if (ret < 0) { dev_err(adapter->pdev_dev, "error %d identifying flash\n", ret); return ret; } /* Retrieve adapter's device ID */ pci_read_config_word(adapter->pdev, PCI_DEVICE_ID, &device_id); ver = device_id >> 12; adapter->params.chip = 0; switch (ver) { case CHELSIO_T4: adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T4, pl_rev); adapter->params.arch.sge_fl_db = DBPRIO_F; adapter->params.arch.mps_tcam_size = NUM_MPS_CLS_SRAM_L_INSTANCES; adapter->params.arch.mps_rplc_size = 128; adapter->params.arch.nchan = NCHAN; adapter->params.arch.vfcount = 128; break; case CHELSIO_T5: adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev); adapter->params.arch.sge_fl_db = DBPRIO_F | DBTYPE_F; adapter->params.arch.mps_tcam_size = NUM_MPS_T5_CLS_SRAM_L_INSTANCES; adapter->params.arch.mps_rplc_size = 128; adapter->params.arch.nchan = NCHAN; adapter->params.arch.vfcount = 128; break; case CHELSIO_T6: adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev); adapter->params.arch.sge_fl_db = 0; adapter->params.arch.mps_tcam_size = NUM_MPS_T5_CLS_SRAM_L_INSTANCES; adapter->params.arch.mps_rplc_size = 256; adapter->params.arch.nchan = 2; adapter->params.arch.vfcount = 256; break; default: dev_err(adapter->pdev_dev, "Device %d is not supported\n", device_id); return -EINVAL; } adapter->params.cim_la_size = CIMLA_SIZE; init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd); /* * Default port for debugging in case we can't reach FW. */ adapter->params.nports = 1; adapter->params.portvec = 1; adapter->params.vpd.cclk = 50000; /* Set pci completion timeout value to 4 seconds. */ set_pcie_completion_timeout(adapter, 0xd); return 0; } /** * t4_bar2_sge_qregs - return BAR2 SGE Queue register information * @adapter: the adapter * @qid: the Queue ID * @qtype: the Ingress or Egress type for @qid * @user: true if this request is for a user mode queue * @pbar2_qoffset: BAR2 Queue Offset * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues * * Returns the BAR2 SGE Queue Registers information associated with the * indicated Absolute Queue ID. These are passed back in return value * pointers. @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue * and T4_BAR2_QTYPE_INGRESS for Ingress Queues. * * This may return an error which indicates that BAR2 SGE Queue * registers aren't available. If an error is not returned, then the * following values are returned: * * *@pbar2_qoffset: the BAR2 Offset of the @qid Registers * *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid * * If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which * require the "Inferred Queue ID" ability may be used. E.g. the * Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0, * then these "Inferred Queue ID" register may not be used. */ int t4_bar2_sge_qregs(struct adapter *adapter, unsigned int qid, enum t4_bar2_qtype qtype, int user, u64 *pbar2_qoffset, unsigned int *pbar2_qid) { unsigned int page_shift, page_size, qpp_shift, qpp_mask; u64 bar2_page_offset, bar2_qoffset; unsigned int bar2_qid, bar2_qid_offset, bar2_qinferred; /* T4 doesn't support BAR2 SGE Queue registers for kernel mode queues */ if (!user && is_t4(adapter->params.chip)) return -EINVAL; /* Get our SGE Page Size parameters. */ page_shift = adapter->params.sge.hps + 10; page_size = 1 << page_shift; /* Get the right Queues per Page parameters for our Queue. */ qpp_shift = (qtype == T4_BAR2_QTYPE_EGRESS ? adapter->params.sge.eq_qpp : adapter->params.sge.iq_qpp); qpp_mask = (1 << qpp_shift) - 1; /* Calculate the basics of the BAR2 SGE Queue register area: * o The BAR2 page the Queue registers will be in. * o The BAR2 Queue ID. * o The BAR2 Queue ID Offset into the BAR2 page. */ bar2_page_offset = ((u64)(qid >> qpp_shift) << page_shift); bar2_qid = qid & qpp_mask; bar2_qid_offset = bar2_qid * SGE_UDB_SIZE; /* If the BAR2 Queue ID Offset is less than the Page Size, then the * hardware will infer the Absolute Queue ID simply from the writes to * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a * BAR2 Queue ID of 0 for those writes). Otherwise, we'll simply * write to the first BAR2 SGE Queue Area within the BAR2 Page with * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID * from the BAR2 Page and BAR2 Queue ID. * * One important censequence of this is that some BAR2 SGE registers * have a "Queue ID" field and we can write the BAR2 SGE Queue ID * there. But other registers synthesize the SGE Queue ID purely * from the writes to the registers -- the Write Combined Doorbell * Buffer is a good example. These BAR2 SGE Registers are only * available for those BAR2 SGE Register areas where the SGE Absolute * Queue ID can be inferred from simple writes. */ bar2_qoffset = bar2_page_offset; bar2_qinferred = (bar2_qid_offset < page_size); if (bar2_qinferred) { bar2_qoffset += bar2_qid_offset; bar2_qid = 0; } *pbar2_qoffset = bar2_qoffset; *pbar2_qid = bar2_qid; return 0; } /** * t4_init_devlog_params - initialize adapter->params.devlog * @adap: the adapter * * Initialize various fields of the adapter's Firmware Device Log * Parameters structure. */ int t4_init_devlog_params(struct adapter *adap) { struct devlog_params *dparams = &adap->params.devlog; u32 pf_dparams; unsigned int devlog_meminfo; struct fw_devlog_cmd devlog_cmd; int ret; /* If we're dealing with newer firmware, the Device Log Paramerters * are stored in a designated register which allows us to access the * Device Log even if we can't talk to the firmware. */ pf_dparams = t4_read_reg(adap, PCIE_FW_REG(PCIE_FW_PF_A, PCIE_FW_PF_DEVLOG)); if (pf_dparams) { unsigned int nentries, nentries128; dparams->memtype = PCIE_FW_PF_DEVLOG_MEMTYPE_G(pf_dparams); dparams->start = PCIE_FW_PF_DEVLOG_ADDR16_G(pf_dparams) << 4; nentries128 = PCIE_FW_PF_DEVLOG_NENTRIES128_G(pf_dparams); nentries = (nentries128 + 1) * 128; dparams->size = nentries * sizeof(struct fw_devlog_e); return 0; } /* Otherwise, ask the firmware for it's Device Log Parameters. */ memset(&devlog_cmd, 0, sizeof(devlog_cmd)); devlog_cmd.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_DEVLOG_CMD) | FW_CMD_REQUEST_F | FW_CMD_READ_F); devlog_cmd.retval_len16 = cpu_to_be32(FW_LEN16(devlog_cmd)); ret = t4_wr_mbox(adap, adap->mbox, &devlog_cmd, sizeof(devlog_cmd), &devlog_cmd); if (ret) return ret; devlog_meminfo = be32_to_cpu(devlog_cmd.memtype_devlog_memaddr16_devlog); dparams->memtype = FW_DEVLOG_CMD_MEMTYPE_DEVLOG_G(devlog_meminfo); dparams->start = FW_DEVLOG_CMD_MEMADDR16_DEVLOG_G(devlog_meminfo) << 4; dparams->size = be32_to_cpu(devlog_cmd.memsize_devlog); return 0; } /** * t4_init_sge_params - initialize adap->params.sge * @adapter: the adapter * * Initialize various fields of the adapter's SGE Parameters structure. */ int t4_init_sge_params(struct adapter *adapter) { struct sge_params *sge_params = &adapter->params.sge; u32 hps, qpp; unsigned int s_hps, s_qpp; /* Extract the SGE Page Size for our PF. */ hps = t4_read_reg(adapter, SGE_HOST_PAGE_SIZE_A); s_hps = (HOSTPAGESIZEPF0_S + (HOSTPAGESIZEPF1_S - HOSTPAGESIZEPF0_S) * adapter->pf); sge_params->hps = ((hps >> s_hps) & HOSTPAGESIZEPF0_M); /* Extract the SGE Egress and Ingess Queues Per Page for our PF. */ s_qpp = (QUEUESPERPAGEPF0_S + (QUEUESPERPAGEPF1_S - QUEUESPERPAGEPF0_S) * adapter->pf); qpp = t4_read_reg(adapter, SGE_EGRESS_QUEUES_PER_PAGE_PF_A); sge_params->eq_qpp = ((qpp >> s_qpp) & QUEUESPERPAGEPF0_M); qpp = t4_read_reg(adapter, SGE_INGRESS_QUEUES_PER_PAGE_PF_A); sge_params->iq_qpp = ((qpp >> s_qpp) & QUEUESPERPAGEPF0_M); return 0; } /** * t4_init_tp_params - initialize adap->params.tp * @adap: the adapter * * Initialize various fields of the adapter's TP Parameters structure. */ int t4_init_tp_params(struct adapter *adap) { int chan; u32 v; v = t4_read_reg(adap, TP_TIMER_RESOLUTION_A); adap->params.tp.tre = TIMERRESOLUTION_G(v); adap->params.tp.dack_re = DELAYEDACKRESOLUTION_G(v); /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */ for (chan = 0; chan < NCHAN; chan++) adap->params.tp.tx_modq[chan] = chan; /* Cache the adapter's Compressed Filter Mode and global Incress * Configuration. */ if (t4_use_ldst(adap)) { t4_fw_tp_pio_rw(adap, &adap->params.tp.vlan_pri_map, 1, TP_VLAN_PRI_MAP_A, 1); t4_fw_tp_pio_rw(adap, &adap->params.tp.ingress_config, 1, TP_INGRESS_CONFIG_A, 1); } else { t4_read_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, &adap->params.tp.vlan_pri_map, 1, TP_VLAN_PRI_MAP_A); t4_read_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, &adap->params.tp.ingress_config, 1, TP_INGRESS_CONFIG_A); } /* Now that we have TP_VLAN_PRI_MAP cached, we can calculate the field * shift positions of several elements of the Compressed Filter Tuple * for this adapter which we need frequently ... */ adap->params.tp.vlan_shift = t4_filter_field_shift(adap, VLAN_F); adap->params.tp.vnic_shift = t4_filter_field_shift(adap, VNIC_ID_F); adap->params.tp.port_shift = t4_filter_field_shift(adap, PORT_F); adap->params.tp.protocol_shift = t4_filter_field_shift(adap, PROTOCOL_F); /* If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID * represents the presence of an Outer VLAN instead of a VNIC ID. */ if ((adap->params.tp.ingress_config & VNIC_F) == 0) adap->params.tp.vnic_shift = -1; return 0; } /** * t4_filter_field_shift - calculate filter field shift * @adap: the adapter * @filter_sel: the desired field (from TP_VLAN_PRI_MAP bits) * * Return the shift position of a filter field within the Compressed * Filter Tuple. The filter field is specified via its selection bit * within TP_VLAN_PRI_MAL (filter mode). E.g. F_VLAN. */ int t4_filter_field_shift(const struct adapter *adap, int filter_sel) { unsigned int filter_mode = adap->params.tp.vlan_pri_map; unsigned int sel; int field_shift; if ((filter_mode & filter_sel) == 0) return -1; for (sel = 1, field_shift = 0; sel < filter_sel; sel <<= 1) { switch (filter_mode & sel) { case FCOE_F: field_shift += FT_FCOE_W; break; case PORT_F: field_shift += FT_PORT_W; break; case VNIC_ID_F: field_shift += FT_VNIC_ID_W; break; case VLAN_F: field_shift += FT_VLAN_W; break; case TOS_F: field_shift += FT_TOS_W; break; case PROTOCOL_F: field_shift += FT_PROTOCOL_W; break; case ETHERTYPE_F: field_shift += FT_ETHERTYPE_W; break; case MACMATCH_F: field_shift += FT_MACMATCH_W; break; case MPSHITTYPE_F: field_shift += FT_MPSHITTYPE_W; break; case FRAGMENTATION_F: field_shift += FT_FRAGMENTATION_W; break; } } return field_shift; } int t4_init_rss_mode(struct adapter *adap, int mbox) { int i, ret; struct fw_rss_vi_config_cmd rvc; memset(&rvc, 0, sizeof(rvc)); for_each_port(adap, i) { struct port_info *p = adap2pinfo(adap, i); rvc.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) | FW_CMD_REQUEST_F | FW_CMD_READ_F | FW_RSS_VI_CONFIG_CMD_VIID_V(p->viid)); rvc.retval_len16 = cpu_to_be32(FW_LEN16(rvc)); ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc); if (ret) return ret; p->rss_mode = be32_to_cpu(rvc.u.basicvirtual.defaultq_to_udpen); } return 0; } int t4_port_init(struct adapter *adap, int mbox, int pf, int vf) { u8 addr[6]; int ret, i, j = 0; struct fw_port_cmd c; struct fw_rss_vi_config_cmd rvc; memset(&c, 0, sizeof(c)); memset(&rvc, 0, sizeof(rvc)); for_each_port(adap, i) { unsigned int rss_size; struct port_info *p = adap2pinfo(adap, i); while ((adap->params.portvec & (1 << j)) == 0) j++; c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) | FW_CMD_REQUEST_F | FW_CMD_READ_F | FW_PORT_CMD_PORTID_V(j)); c.action_to_len16 = cpu_to_be32( FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_GET_PORT_INFO) | FW_LEN16(c)); ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); if (ret) return ret; ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size); if (ret < 0) return ret; p->viid = ret; p->tx_chan = j; p->lport = j; p->rss_size = rss_size; memcpy(adap->port[i]->dev_addr, addr, ETH_ALEN); adap->port[i]->dev_port = j; ret = be32_to_cpu(c.u.info.lstatus_to_modtype); p->mdio_addr = (ret & FW_PORT_CMD_MDIOCAP_F) ? FW_PORT_CMD_MDIOADDR_G(ret) : -1; p->port_type = FW_PORT_CMD_PTYPE_G(ret); p->mod_type = FW_PORT_MOD_TYPE_NA; rvc.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) | FW_CMD_REQUEST_F | FW_CMD_READ_F | FW_RSS_VI_CONFIG_CMD_VIID(p->viid)); rvc.retval_len16 = cpu_to_be32(FW_LEN16(rvc)); ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc); if (ret) return ret; p->rss_mode = be32_to_cpu(rvc.u.basicvirtual.defaultq_to_udpen); init_link_config(&p->link_cfg, be16_to_cpu(c.u.info.pcap)); j++; } return 0; } /** * t4_read_cimq_cfg - read CIM queue configuration * @adap: the adapter * @base: holds the queue base addresses in bytes * @size: holds the queue sizes in bytes * @thres: holds the queue full thresholds in bytes * * Returns the current configuration of the CIM queues, starting with * the IBQs, then the OBQs. */ void t4_read_cimq_cfg(struct adapter *adap, u16 *base, u16 *size, u16 *thres) { unsigned int i, v; int cim_num_obq = is_t4(adap->params.chip) ? CIM_NUM_OBQ : CIM_NUM_OBQ_T5; for (i = 0; i < CIM_NUM_IBQ; i++) { t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, IBQSELECT_F | QUENUMSELECT_V(i)); v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A); /* value is in 256-byte units */ *base++ = CIMQBASE_G(v) * 256; *size++ = CIMQSIZE_G(v) * 256; *thres++ = QUEFULLTHRSH_G(v) * 8; /* 8-byte unit */ } for (i = 0; i < cim_num_obq; i++) { t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, OBQSELECT_F | QUENUMSELECT_V(i)); v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A); /* value is in 256-byte units */ *base++ = CIMQBASE_G(v) * 256; *size++ = CIMQSIZE_G(v) * 256; } } /** * t4_read_cim_ibq - read the contents of a CIM inbound queue * @adap: the adapter * @qid: the queue index * @data: where to store the queue contents * @n: capacity of @data in 32-bit words * * Reads the contents of the selected CIM queue starting at address 0 up * to the capacity of @data. @n must be a multiple of 4. Returns < 0 on * error and the number of 32-bit words actually read on success. */ int t4_read_cim_ibq(struct adapter *adap, unsigned int qid, u32 *data, size_t n) { int i, err, attempts; unsigned int addr; const unsigned int nwords = CIM_IBQ_SIZE * 4; if (qid > 5 || (n & 3)) return -EINVAL; addr = qid * nwords; if (n > nwords) n = nwords; /* It might take 3-10ms before the IBQ debug read access is allowed. * Wait for 1 Sec with a delay of 1 usec. */ attempts = 1000000; for (i = 0; i < n; i++, addr++) { t4_write_reg(adap, CIM_IBQ_DBG_CFG_A, IBQDBGADDR_V(addr) | IBQDBGEN_F); err = t4_wait_op_done(adap, CIM_IBQ_DBG_CFG_A, IBQDBGBUSY_F, 0, attempts, 1); if (err) return err; *data++ = t4_read_reg(adap, CIM_IBQ_DBG_DATA_A); } t4_write_reg(adap, CIM_IBQ_DBG_CFG_A, 0); return i; } /** * t4_read_cim_obq - read the contents of a CIM outbound queue * @adap: the adapter * @qid: the queue index * @data: where to store the queue contents * @n: capacity of @data in 32-bit words * * Reads the contents of the selected CIM queue starting at address 0 up * to the capacity of @data. @n must be a multiple of 4. Returns < 0 on * error and the number of 32-bit words actually read on success. */ int t4_read_cim_obq(struct adapter *adap, unsigned int qid, u32 *data, size_t n) { int i, err; unsigned int addr, v, nwords; int cim_num_obq = is_t4(adap->params.chip) ? CIM_NUM_OBQ : CIM_NUM_OBQ_T5; if ((qid > (cim_num_obq - 1)) || (n & 3)) return -EINVAL; t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, OBQSELECT_F | QUENUMSELECT_V(qid)); v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A); addr = CIMQBASE_G(v) * 64; /* muliple of 256 -> muliple of 4 */ nwords = CIMQSIZE_G(v) * 64; /* same */ if (n > nwords) n = nwords; for (i = 0; i < n; i++, addr++) { t4_write_reg(adap, CIM_OBQ_DBG_CFG_A, OBQDBGADDR_V(addr) | OBQDBGEN_F); err = t4_wait_op_done(adap, CIM_OBQ_DBG_CFG_A, OBQDBGBUSY_F, 0, 2, 1); if (err) return err; *data++ = t4_read_reg(adap, CIM_OBQ_DBG_DATA_A); } t4_write_reg(adap, CIM_OBQ_DBG_CFG_A, 0); return i; } /** * t4_cim_read - read a block from CIM internal address space * @adap: the adapter * @addr: the start address within the CIM address space * @n: number of words to read * @valp: where to store the result * * Reads a block of 4-byte words from the CIM intenal address space. */ int t4_cim_read(struct adapter *adap, unsigned int addr, unsigned int n, unsigned int *valp) { int ret = 0; if (t4_read_reg(adap, CIM_HOST_ACC_CTRL_A) & HOSTBUSY_F) return -EBUSY; for ( ; !ret && n--; addr += 4) { t4_write_reg(adap, CIM_HOST_ACC_CTRL_A, addr); ret = t4_wait_op_done(adap, CIM_HOST_ACC_CTRL_A, HOSTBUSY_F, 0, 5, 2); if (!ret) *valp++ = t4_read_reg(adap, CIM_HOST_ACC_DATA_A); } return ret; } /** * t4_cim_write - write a block into CIM internal address space * @adap: the adapter * @addr: the start address within the CIM address space * @n: number of words to write * @valp: set of values to write * * Writes a block of 4-byte words into the CIM intenal address space. */ int t4_cim_write(struct adapter *adap, unsigned int addr, unsigned int n, const unsigned int *valp) { int ret = 0; if (t4_read_reg(adap, CIM_HOST_ACC_CTRL_A) & HOSTBUSY_F) return -EBUSY; for ( ; !ret && n--; addr += 4) { t4_write_reg(adap, CIM_HOST_ACC_DATA_A, *valp++); t4_write_reg(adap, CIM_HOST_ACC_CTRL_A, addr | HOSTWRITE_F); ret = t4_wait_op_done(adap, CIM_HOST_ACC_CTRL_A, HOSTBUSY_F, 0, 5, 2); } return ret; } static int t4_cim_write1(struct adapter *adap, unsigned int addr, unsigned int val) { return t4_cim_write(adap, addr, 1, &val); } /** * t4_cim_read_la - read CIM LA capture buffer * @adap: the adapter * @la_buf: where to store the LA data * @wrptr: the HW write pointer within the capture buffer * * Reads the contents of the CIM LA buffer with the most recent entry at * the end of the returned data and with the entry at @wrptr first. * We try to leave the LA in the running state we find it in. */ int t4_cim_read_la(struct adapter *adap, u32 *la_buf, unsigned int *wrptr) { int i, ret; unsigned int cfg, val, idx; ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &cfg); if (ret) return ret; if (cfg & UPDBGLAEN_F) { /* LA is running, freeze it */ ret = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A, 0); if (ret) return ret; } ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &val); if (ret) goto restart; idx = UPDBGLAWRPTR_G(val); if (wrptr) *wrptr = idx; for (i = 0; i < adap->params.cim_la_size; i++) { ret = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A, UPDBGLARDPTR_V(idx) | UPDBGLARDEN_F); if (ret) break; ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &val); if (ret) break; if (val & UPDBGLARDEN_F) { ret = -ETIMEDOUT; break; } ret = t4_cim_read(adap, UP_UP_DBG_LA_DATA_A, 1, &la_buf[i]); if (ret) break; /* Bits 0-3 of UpDbgLaRdPtr can be between 0000 to 1001 to * identify the 32-bit portion of the full 312-bit data */ if (is_t6(adap->params.chip) && (idx & 0xf) >= 9) idx = (idx & 0xff0) + 0x10; else idx++; /* address can't exceed 0xfff */ idx &= UPDBGLARDPTR_M; } restart: if (cfg & UPDBGLAEN_F) { int r = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A, cfg & ~UPDBGLARDEN_F); if (!ret) ret = r; } return ret; } /** * t4_tp_read_la - read TP LA capture buffer * @adap: the adapter * @la_buf: where to store the LA data * @wrptr: the HW write pointer within the capture buffer * * Reads the contents of the TP LA buffer with the most recent entry at * the end of the returned data and with the entry at @wrptr first. * We leave the LA in the running state we find it in. */ void t4_tp_read_la(struct adapter *adap, u64 *la_buf, unsigned int *wrptr) { bool last_incomplete; unsigned int i, cfg, val, idx; cfg = t4_read_reg(adap, TP_DBG_LA_CONFIG_A) & 0xffff; if (cfg & DBGLAENABLE_F) /* freeze LA */ t4_write_reg(adap, TP_DBG_LA_CONFIG_A, adap->params.tp.la_mask | (cfg ^ DBGLAENABLE_F)); val = t4_read_reg(adap, TP_DBG_LA_CONFIG_A); idx = DBGLAWPTR_G(val); last_incomplete = DBGLAMODE_G(val) >= 2 && (val & DBGLAWHLF_F) == 0; if (last_incomplete) idx = (idx + 1) & DBGLARPTR_M; if (wrptr) *wrptr = idx; val &= 0xffff; val &= ~DBGLARPTR_V(DBGLARPTR_M); val |= adap->params.tp.la_mask; for (i = 0; i < TPLA_SIZE; i++) { t4_write_reg(adap, TP_DBG_LA_CONFIG_A, DBGLARPTR_V(idx) | val); la_buf[i] = t4_read_reg64(adap, TP_DBG_LA_DATAL_A); idx = (idx + 1) & DBGLARPTR_M; } /* Wipe out last entry if it isn't valid */ if (last_incomplete) la_buf[TPLA_SIZE - 1] = ~0ULL; if (cfg & DBGLAENABLE_F) /* restore running state */ t4_write_reg(adap, TP_DBG_LA_CONFIG_A, cfg | adap->params.tp.la_mask); } /* SGE Hung Ingress DMA Warning Threshold time and Warning Repeat Rate (in * seconds). If we find one of the SGE Ingress DMA State Machines in the same * state for more than the Warning Threshold then we'll issue a warning about * a potential hang. We'll repeat the warning as the SGE Ingress DMA Channel * appears to be hung every Warning Repeat second till the situation clears. * If the situation clears, we'll note that as well. */ #define SGE_IDMA_WARN_THRESH 1 #define SGE_IDMA_WARN_REPEAT 300 /** * t4_idma_monitor_init - initialize SGE Ingress DMA Monitor * @adapter: the adapter * @idma: the adapter IDMA Monitor state * * Initialize the state of an SGE Ingress DMA Monitor. */ void t4_idma_monitor_init(struct adapter *adapter, struct sge_idma_monitor_state *idma) { /* Initialize the state variables for detecting an SGE Ingress DMA * hang. The SGE has internal counters which count up on each clock * tick whenever the SGE finds its Ingress DMA State Engines in the * same state they were on the previous clock tick. The clock used is * the Core Clock so we have a limit on the maximum "time" they can * record; typically a very small number of seconds. For instance, * with a 600MHz Core Clock, we can only count up to a bit more than * 7s. So we'll synthesize a larger counter in order to not run the * risk of having the "timers" overflow and give us the flexibility to * maintain a Hung SGE State Machine of our own which operates across * a longer time frame. */ idma->idma_1s_thresh = core_ticks_per_usec(adapter) * 1000000; /* 1s */ idma->idma_stalled[0] = 0; idma->idma_stalled[1] = 0; } /** * t4_idma_monitor - monitor SGE Ingress DMA state * @adapter: the adapter * @idma: the adapter IDMA Monitor state * @hz: number of ticks/second * @ticks: number of ticks since the last IDMA Monitor call */ void t4_idma_monitor(struct adapter *adapter, struct sge_idma_monitor_state *idma, int hz, int ticks) { int i, idma_same_state_cnt[2]; /* Read the SGE Debug Ingress DMA Same State Count registers. These * are counters inside the SGE which count up on each clock when the * SGE finds its Ingress DMA State Engines in the same states they * were in the previous clock. The counters will peg out at * 0xffffffff without wrapping around so once they pass the 1s * threshold they'll stay above that till the IDMA state changes. */ t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 13); idma_same_state_cnt[0] = t4_read_reg(adapter, SGE_DEBUG_DATA_HIGH_A); idma_same_state_cnt[1] = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A); for (i = 0; i < 2; i++) { u32 debug0, debug11; /* If the Ingress DMA Same State Counter ("timer") is less * than 1s, then we can reset our synthesized Stall Timer and * continue. If we have previously emitted warnings about a * potential stalled Ingress Queue, issue a note indicating * that the Ingress Queue has resumed forward progress. */ if (idma_same_state_cnt[i] < idma->idma_1s_thresh) { if (idma->idma_stalled[i] >= SGE_IDMA_WARN_THRESH * hz) dev_warn(adapter->pdev_dev, "SGE idma%d, queue %u, " "resumed after %d seconds\n", i, idma->idma_qid[i], idma->idma_stalled[i] / hz); idma->idma_stalled[i] = 0; continue; } /* Synthesize an SGE Ingress DMA Same State Timer in the Hz * domain. The first time we get here it'll be because we * passed the 1s Threshold; each additional time it'll be * because the RX Timer Callback is being fired on its regular * schedule. * * If the stall is below our Potential Hung Ingress Queue * Warning Threshold, continue. */ if (idma->idma_stalled[i] == 0) { idma->idma_stalled[i] = hz; idma->idma_warn[i] = 0; } else { idma->idma_stalled[i] += ticks; idma->idma_warn[i] -= ticks; } if (idma->idma_stalled[i] < SGE_IDMA_WARN_THRESH * hz) continue; /* We'll issue a warning every SGE_IDMA_WARN_REPEAT seconds. */ if (idma->idma_warn[i] > 0) continue; idma->idma_warn[i] = SGE_IDMA_WARN_REPEAT * hz; /* Read and save the SGE IDMA State and Queue ID information. * We do this every time in case it changes across time ... * can't be too careful ... */ t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 0); debug0 = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A); idma->idma_state[i] = (debug0 >> (i * 9)) & 0x3f; t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 11); debug11 = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A); idma->idma_qid[i] = (debug11 >> (i * 16)) & 0xffff; dev_warn(adapter->pdev_dev, "SGE idma%u, queue %u, potentially stuck in " "state %u for %d seconds (debug0=%#x, debug11=%#x)\n", i, idma->idma_qid[i], idma->idma_state[i], idma->idma_stalled[i] / hz, debug0, debug11); t4_sge_decode_idma_state(adapter, idma->idma_state[i]); } }