--- zzzz-none-000/linux-4.4.271/include/net/cfg80211.h 2021-06-03 06:22:09.000000000 +0000 +++ maple-fsgw-759/linux-4.4.271/include/net/cfg80211.h 2023-12-20 10:37:37.000000000 +0000 @@ -82,6 +82,7 @@ IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ, IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ, IEEE80211_BAND_60GHZ = NL80211_BAND_60GHZ, + IEEE80211_BAND_6GHZ = NL80211_BAND_6GHZ, /* keep last */ IEEE80211_NUM_BANDS @@ -304,6 +305,95 @@ struct ieee80211_vht_mcs_info vht_mcs; }; +#define IEEE80211_HE_PPE_THRES_MAX_LEN 25 + +/** + * struct ieee80211_sta_he_cap - STA's HE capabilities + * + * This structure describes most essential parameters needed + * to describe 802.11ax HE capabilities for a STA. + * + * @has_he: true iff HE data is valid. + * @he_cap_elem: Fixed portion of the HE capabilities element. + * @he_mcs_nss_supp: The supported NSS/MCS combinations. + * @ppe_thres: Holds the PPE Thresholds data. + */ +struct ieee80211_sta_he_cap { + bool has_he; + struct ieee80211_he_cap_elem he_cap_elem; + struct ieee80211_he_mcs_nss_supp he_mcs_nss_supp; + u8 ppe_thres[IEEE80211_HE_PPE_THRES_MAX_LEN]; +}; + +/** + * struct ieee80211_sband_iftype_data + * + * This structure encapsulates sband data that is relevant for the + * interface types defined in @types_mask. Each type in the + * @types_mask must be unique across all instances of iftype_data. + * + * @types_mask: interface types mask + * @he_cap: holds the HE capabilities + */ +struct ieee80211_sband_iftype_data { + u16 types_mask; + struct ieee80211_sta_he_cap he_cap; +}; + +/** + * enum ieee80211_edmg_bw_config - allowed channel bandwidth configurations + * + * @IEEE80211_EDMG_BW_CONFIG_4: 2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_5: 2.16GHz and 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_6: 2.16GHz, 4.32GHz and 6.48GHz + * @IEEE80211_EDMG_BW_CONFIG_7: 2.16GHz, 4.32GHz, 6.48GHz and 8.64GHz + * @IEEE80211_EDMG_BW_CONFIG_8: 2.16GHz and 2.16GHz + 2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_9: 2.16GHz, 4.32GHz and 2.16GHz + 2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_10: 2.16GHz, 4.32GHz, 6.48GHz and 2.16GHz+2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_11: 2.16GHz, 4.32GHz, 6.48GHz, 8.64GHz and + * 2.16GHz+2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_12: 2.16GHz, 2.16GHz + 2.16GHz and + * 4.32GHz + 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_13: 2.16GHz, 4.32GHz, 2.16GHz + 2.16GHz and + * 4.32GHz + 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_14: 2.16GHz, 4.32GHz, 6.48GHz, 2.16GHz + 2.16GHz + * and 4.32GHz + 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_15: 2.16GHz, 4.32GHz, 6.48GHz, 8.64GHz, + * 2.16GHz + 2.16GHz and 4.32GHz + 4.32GHz + */ +enum ieee80211_edmg_bw_config { + IEEE80211_EDMG_BW_CONFIG_4 = 4, + IEEE80211_EDMG_BW_CONFIG_5 = 5, + IEEE80211_EDMG_BW_CONFIG_6 = 6, + IEEE80211_EDMG_BW_CONFIG_7 = 7, + IEEE80211_EDMG_BW_CONFIG_8 = 8, + IEEE80211_EDMG_BW_CONFIG_9 = 9, + IEEE80211_EDMG_BW_CONFIG_10 = 10, + IEEE80211_EDMG_BW_CONFIG_11 = 11, + IEEE80211_EDMG_BW_CONFIG_12 = 12, + IEEE80211_EDMG_BW_CONFIG_13 = 13, + IEEE80211_EDMG_BW_CONFIG_14 = 14, + IEEE80211_EDMG_BW_CONFIG_15 = 15, +}; + +/** + * struct ieee80211_edmg - EDMG configuration + * + * This structure describes most essential parameters needed + * to describe 802.11ay EDMG configuration + * + * @channels: bitmap that indicates the 2.16 GHz channel(s) + * that are allowed to be used for transmissions. + * Bit 0 indicates channel 1, bit 1 indicates channel 2, etc. + * Set to 0 indicate EDMG not supported. + * @bw_config: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations + */ +struct ieee80211_edmg { + u8 channels; + enum ieee80211_edmg_bw_config bw_config; +}; + /** * struct ieee80211_supported_band - frequency band definition * @@ -320,6 +410,12 @@ * @n_bitrates: Number of bitrates in @bitrates * @ht_cap: HT capabilities in this band * @vht_cap: VHT capabilities in this band + * @edmg_cap: EDMG capabilities in this band + * @n_iftype_data: number of iftype data entries + * @iftype_data: interface type data entries. Note that the bits in + * @types_mask inside this structure cannot overlap (i.e. only + * one occurrence of each type is allowed across all instances of + * iftype_data). */ struct ieee80211_supported_band { struct ieee80211_channel *channels; @@ -329,8 +425,56 @@ int n_bitrates; struct ieee80211_sta_ht_cap ht_cap; struct ieee80211_sta_vht_cap vht_cap; + struct ieee80211_edmg edmg_cap; + u16 n_iftype_data; + const struct ieee80211_sband_iftype_data *iftype_data; }; +/** + * ieee80211_get_sband_iftype_data - return sband data for a given iftype + * @sband: the sband to search for the STA on + * @iftype: enum nl80211_iftype + * + * Return: pointer to struct ieee80211_sband_iftype_data, or NULL is none found + */ +static inline const struct ieee80211_sband_iftype_data * +ieee80211_get_sband_iftype_data(const struct ieee80211_supported_band *sband, + u8 iftype) +{ + int i; + + if (WARN_ON(iftype >= NL80211_IFTYPE_MAX)) + return NULL; + + for (i = 0; i < sband->n_iftype_data; i++) { + const struct ieee80211_sband_iftype_data *data = + &sband->iftype_data[i]; + + if (data->types_mask & BIT(iftype)) + return data; + } + + return NULL; +} + +/** + * ieee80211_get_he_sta_cap - return HE capabilities for an sband's STA + * @sband: the sband to search for the STA on + * + * Return: pointer to the struct ieee80211_sta_he_cap, or NULL is none found + */ +static inline const struct ieee80211_sta_he_cap * +ieee80211_get_he_sta_cap(const struct ieee80211_supported_band *sband) +{ + const struct ieee80211_sband_iftype_data *data = + ieee80211_get_sband_iftype_data(sband, NL80211_IFTYPE_STATION); + + if (data && data->he_cap.has_he) + return &data->he_cap; + + return NULL; +} + /* * Wireless hardware/device configuration structures and methods */ @@ -377,12 +521,14 @@ * with the get_key() callback, must be in little endian, * length given by @seq_len. * @seq_len: length of @seq. + * @vlan_id: vlan_id for VLAN group key (if nonzero) */ struct key_params { const u8 *key; const u8 *seq; int key_len; int seq_len; + u16 vlan_id; u32 cipher; }; @@ -393,12 +539,33 @@ * @center_freq1: center frequency of first segment * @center_freq2: center frequency of second segment * (only with 80+80 MHz) + * @edmg: define the EDMG channels configuration. + * If edmg is requested (i.e. the .channels member is non-zero), + * chan will define the primary channel and all other + * parameters are ignored. */ struct cfg80211_chan_def { struct ieee80211_channel *chan; enum nl80211_chan_width width; u32 center_freq1; u32 center_freq2; + struct ieee80211_edmg edmg; +}; + +/** + * struct cfg80211_fils_aad - FILS AAD data + * @macaddr: STA MAC address + * @kek: FILS KEK + * @kek_len: FILS KEK length + * @snonce: STA Nonce + * @anonce: AP Nonce + */ +struct cfg80211_fils_aad { + const u8 *macaddr; + const u8 *kek; + u8 kek_len; + const u8 *snonce; + const u8 *anonce; }; /** @@ -457,6 +624,19 @@ } /** + * cfg80211_chandef_is_edmg - check if chandef represents an EDMG channel + * + * @chandef: the channel definition + * + * Return: %true if EDMG defined, %false otherwise. + */ +static inline bool +cfg80211_chandef_is_edmg(const struct cfg80211_chan_def *chandef) +{ + return chandef->edmg.channels || chandef->edmg.bw_config; +} + +/** * cfg80211_chandef_compatible - check if two channel definitions are compatible * @chandef1: first channel definition * @chandef2: second channel definition @@ -624,6 +804,10 @@ * allowed through even on unauthorized ports * @control_port_no_encrypt: TRUE to prevent encryption of control port * protocol frames. + * @sae_pwe: value indicates the SAE mechanism used for PWE derivation + * 0 = hunting-and-pecking loop only + * 1 = hash-to-element only + * 2 = both hunting-and-pecking loop and hash-to-element enabled */ struct cfg80211_crypto_settings { u32 wpa_versions; @@ -635,6 +819,7 @@ bool control_port; __be16 control_port_ethertype; bool control_port_no_encrypt; + u16 sae_pwe; }; /** @@ -712,6 +897,13 @@ * @p2p_opp_ps: P2P opportunistic PS * @acl: ACL configuration used by the drivers which has support for * MAC address based access control + * @pbss: If set, start as a PCP instead of AP. Relevant for DMG + * networks. + * @ht_cap: HT capabilities (or %NULL if HT isn't enabled) + * @vht_cap: VHT capabilities (or %NULL if VHT isn't enabled) + * @he_cap: HE capabilities (or %NULL if HE isn't enabled) + * @ht_required: stations must support HT + * @vht_required: stations must support VHT */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -730,6 +922,12 @@ u8 p2p_ctwindow; bool p2p_opp_ps; const struct cfg80211_acl_data *acl; + bool pbss; + + const struct ieee80211_ht_cap *ht_cap; + const struct ieee80211_vht_cap *vht_cap; + const struct ieee80211_he_cap_elem *he_cap; + bool ht_required, vht_required; }; /** @@ -791,6 +989,7 @@ * (bitmask of BIT(NL80211_STA_FLAG_...)) * @listen_interval: listen interval or -1 for no change * @aid: AID or zero for no change + * @vlan_id: VLAN ID for station (if nonzero) * @plink_action: plink action to take * @plink_state: set the peer link state for a station * @ht_capa: HT capabilities of station @@ -813,6 +1012,8 @@ * @supported_oper_classes_len: number of supported operating classes * @opmode_notif: operating mode field from Operating Mode Notification * @opmode_notif_used: information if operating mode field is used + * @he_capa: HE capabilities of station + * @he_capa_len: the length of the HE capabilities */ struct station_parameters { const u8 *supported_rates; @@ -821,6 +1022,7 @@ u32 sta_modify_mask; int listen_interval; u16 aid; + u16 vlan_id; u8 supported_rates_len; u8 plink_action; u8 plink_state; @@ -838,6 +1040,8 @@ u8 supported_oper_classes_len; u8 opmode_notif; bool opmode_notif_used; + const struct ieee80211_he_cap_elem *he_capa; + u8 he_capa_len; }; /** @@ -911,13 +1115,17 @@ * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval - * @RATE_INFO_FLAGS_60G: 60GHz MCS + * @RATE_INFO_FLAGS_DMG: 60GHz MCS + * @RATE_INFO_FLAGS_EDMG: 60GHz MCS in EDMG mode + * @RATE_INFO_FLAGS_HE_MCS: HE MCS information */ enum rate_info_flags { RATE_INFO_FLAGS_MCS = BIT(0), RATE_INFO_FLAGS_VHT_MCS = BIT(1), RATE_INFO_FLAGS_SHORT_GI = BIT(2), - RATE_INFO_FLAGS_60G = BIT(3), + RATE_INFO_FLAGS_DMG = BIT(3), + RATE_INFO_FLAGS_EDMG = BIT(5), + RATE_INFO_FLAGS_HE_MCS = BIT(4), }; /** @@ -931,6 +1139,7 @@ * @RATE_INFO_BW_40: 40 MHz bandwidth * @RATE_INFO_BW_80: 80 MHz bandwidth * @RATE_INFO_BW_160: 160 MHz bandwidth + * @RATE_INFO_BW_HE_RU: bandwidth determined by HE RU allocation */ enum rate_info_bw { RATE_INFO_BW_20 = 0, @@ -939,6 +1148,7 @@ RATE_INFO_BW_40, RATE_INFO_BW_80, RATE_INFO_BW_160, + RATE_INFO_BW_HE_RU, }; /** @@ -947,10 +1157,15 @@ * Information about a receiving or transmitting bitrate * * @flags: bitflag of flags from &enum rate_info_flags - * @mcs: mcs index if struct describes a 802.11n bitrate + * @mcs: mcs index if struct describes an HT/VHT/HE rate * @legacy: bitrate in 100kbit/s for 802.11abg - * @nss: number of streams (VHT only) + * @nss: number of streams (VHT & HE only) * @bw: bandwidth (from &enum rate_info_bw) + * @n_bonded_ch: In case of EDMG the number of bonded channels (1-4) + * @he_gi: HE guard interval (from &enum nl80211_he_gi) + * @he_dcm: HE DCM value + * @he_ru_alloc: HE RU allocation (from &enum nl80211_he_ru_alloc, + * only valid if bw is %RATE_INFO_BW_HE_RU) */ struct rate_info { u8 flags; @@ -958,6 +1173,10 @@ u16 legacy; u8 nss; u8 bw; + u8 n_bonded_ch; + u8 he_gi; + u8 he_dcm; + u8 he_ru_alloc; }; /** @@ -1723,11 +1942,16 @@ * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) * @ASSOC_REQ_DISABLE_VHT: Disable VHT * @ASSOC_REQ_USE_RRM: Declare RRM capability in this association + * @CONNECT_REQ_EXTERNAL_AUTH_SUPPORT: User space indicates external + * authentication capability. Drivers can offload authentication to + * userspace if this flag is set. Only applicable for cfg80211_connect() + * request (connect callback). */ enum cfg80211_assoc_req_flags { - ASSOC_REQ_DISABLE_HT = BIT(0), - ASSOC_REQ_DISABLE_VHT = BIT(1), - ASSOC_REQ_USE_RRM = BIT(2), + ASSOC_REQ_DISABLE_HT = BIT(0), + ASSOC_REQ_DISABLE_VHT = BIT(1), + ASSOC_REQ_USE_RRM = BIT(2), + CONNECT_REQ_EXTERNAL_AUTH_SUPPORT = BIT(3), }; /** @@ -1888,6 +2112,11 @@ * @ht_capa_mask: The bits of ht_capa which are to be used. * @vht_capa: VHT Capability overrides * @vht_capa_mask: The bits of vht_capa which are to be used. + * @pbss: if set, connect to a PCP instead of AP. Valid for DMG + * networks. + * @edmg: define the EDMG channels. + * This may specify multiple channels and bonding options for the driver + * to choose from, based on BSS configuration. */ struct cfg80211_connect_params { struct ieee80211_channel *channel; @@ -1910,6 +2139,8 @@ struct ieee80211_ht_cap ht_capa_mask; struct ieee80211_vht_cap vht_capa; struct ieee80211_vht_cap vht_capa_mask; + bool pbss; + struct ieee80211_edmg edmg; }; /** @@ -2222,6 +2453,33 @@ }; /** + * struct cfg80211_external_auth_params - Trigger External authentication. + * + * Commonly used across the external auth request and event interfaces. + * + * @action: action type / trigger for external authentication. Only significant + * for the authentication request event interface (driver to user space). + * @bssid: BSSID of the peer with which the authentication has + * to happen. Used by both the authentication request event and + * authentication response command interface. + * @ssid: SSID of the AP. Used by both the authentication request event and + * authentication response command interface. + * @key_mgmt_suite: AKM suite of the respective authentication. Used by the + * authentication request event interface. + * @status: status code, %WLAN_STATUS_SUCCESS for successful authentication, + * use %WLAN_STATUS_UNSPECIFIED_FAILURE if user space cannot give you + * the real status code for failures. Used only for the authentication + * response command interface (user space to driver). + */ +struct cfg80211_external_auth_params { + enum nl80211_external_auth_action action; + u8 bssid[ETH_ALEN] __aligned(2); + struct cfg80211_ssid ssid; + unsigned int key_mgmt_suite; + u16 status; +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -2268,6 +2526,8 @@ * @set_default_key: set the default key on an interface * * @set_default_mgmt_key: set the default management frame key on an interface + + * @set_default_beacon_key: set default Beacon frame key on an interface * * @set_rekey_data: give the data necessary for GTK rekeying to the driver * @@ -2321,6 +2581,8 @@ * the driver, and will be valid until passed to cfg80211_scan_done(). * For scan results, call cfg80211_inform_bss(); you can call this outside * the scan/scan_done bracket too. + * @abort_scan: Tell the driver to abort an ongoing scan. The driver shall + * indicate the status of the scan through cfg80211_scan_done(). * * @auth: Request to authenticate with the specified peer * (invoked with the wireless_dev mutex held) @@ -2492,6 +2754,11 @@ * and returning to the base channel for communication with the AP. * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both * peers must be on the base channel when the call completes. + * + * @external_auth: indicates result of offloaded authentication processing from + * user space + * @set_fils_aad: Set FILS AAD data to driver so that driver can use those to + * encrypt/decrypt (Re)Association Request/Response frame. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2526,6 +2793,9 @@ int (*set_default_mgmt_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index); + int (*set_default_beacon_key)(struct wiphy *wiphy, + struct net_device *netdev, + u8 key_index); int (*start_ap)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_ap_settings *settings); @@ -2593,6 +2863,7 @@ int (*scan)(struct wiphy *wiphy, struct cfg80211_scan_request *request); + void (*abort_scan)(struct wiphy *wiphy, struct wireless_dev *wdev); int (*auth)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_auth_request *req); @@ -2756,6 +3027,11 @@ void (*tdls_cancel_channel_switch)(struct wiphy *wiphy, struct net_device *dev, const u8 *addr); + int (*external_auth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_external_auth_params *params); + + int (*set_fils_aad)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_fils_aad *fils_aad); }; /* @@ -3486,6 +3762,10 @@ * registered for unexpected class 3 frames (AP mode) * @conn: (private) cfg80211 software SME connection state machine data * @connect_keys: (private) keys to set after connection is established + * @conn_bss_type: connecting/connected BSS type + * @conn_owner_nlportid: (private) connection owner socket port ID + * @disconnect_wk: (private) auto-disconnect work + * @disconnect_bssid: (private) the BSSID to use for auto-disconnect * @ibss_fixed: (private) IBSS is using fixed BSSID * @ibss_dfs_possible: (private) IBSS may change to a DFS channel * @event_list: (private) list for internal event processing @@ -3516,6 +3796,11 @@ u8 ssid_len, mesh_id_len, mesh_id_up_len; struct cfg80211_conn *conn; struct cfg80211_cached_keys *connect_keys; + enum ieee80211_bss_type conn_bss_type; + u32 conn_owner_nlportid; + + struct work_struct disconnect_wk; + u8 disconnect_bssid[ETH_ALEN]; struct list_head event_list; spinlock_t event_lock; @@ -3820,6 +4105,34 @@ struct cfg80211_qos_map *qos_map); /** + * cfg80211_find_ie_match - match information element and byte array in data + * + * @eid: element ID + * @ies: data consisting of IEs + * @len: length of data + * @match: byte array to match + * @match_len: number of bytes in the match array + * @match_offset: offset in the IE where the byte array should match. + * If match_len is zero, this must also be set to zero. + * Otherwise this must be set to 2 or more, because the first + * byte is the element id, which is already compared to eid, and + * the second byte is the IE length. + * + * Return: %NULL if the element ID could not be found or if + * the element is invalid (claims to be longer than the given + * data) or if the byte array doesn't match, or a pointer to the first + * byte of the requested element, that is the byte containing the + * element ID. + * + * Note: There are no checks on the element length other than + * having to fit into the given data and being large enough for the + * byte array to match. + */ +const u8 *cfg80211_find_ie_match(u8 eid, const u8 *ies, int len, + const u8 *match, int match_len, + int match_offset); + +/** * cfg80211_find_ie - find information element in data * * @eid: element ID @@ -3834,7 +4147,31 @@ * Note: There are no checks on the element length other than * having to fit into the given data. */ -const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); +static inline const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len) +{ + return cfg80211_find_ie_match(eid, ies, len, NULL, 0, 0); +} + +/** + * cfg80211_find_ext_ie - find information element with EID Extension in data + * + * @ext_eid: element ID Extension + * @ies: data consisting of IEs + * @len: length of data + * + * Return: %NULL if the extended element ID could not be found or if + * the element is invalid (claims to be longer than the given + * data), or a pointer to the first byte of the requested + * element, that is the byte containing the element ID. + * + * Note: There are no checks on the element length other than + * having to fit into the given data. + */ +static inline const u8 *cfg80211_find_ext_ie(u8 ext_eid, const u8 *ies, int len) +{ + return cfg80211_find_ie_match(WLAN_EID_EXTENSION, ies, len, + &ext_eid, 1, 2); +} /** * cfg80211_find_vendor_ie - find vendor specific information element in data @@ -5325,6 +5662,9 @@ { u8 *ft_byte; + if (ftidx >= NUM_NL80211_EXT_FEATURES) + return; + ft_byte = &wiphy->ext_features[ftidx / 8]; *ft_byte |= BIT(ftidx % 8); } @@ -5344,6 +5684,9 @@ { u8 ft_byte; + if (ftidx >= NUM_NL80211_EXT_FEATURES) + return false; + ft_byte = wiphy->ext_features[ftidx / 8]; return (ft_byte & BIT(ftidx % 8)) != 0; } @@ -5351,6 +5694,17 @@ /* ethtool helper */ void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info); +/** + * cfg80211_external_auth_request - userspace request for authentication + * @netdev: network device + * @params: External authentication parameters + * @gfp: allocation flags + * Returns: 0 on success, < 0 on error + */ +int cfg80211_external_auth_request(struct net_device *netdev, + struct cfg80211_external_auth_params *params, + gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */